Coding style and printk's cleaned up in following patches.
Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This change is probably good for other boards also, but the change
has limited scope and is reasonably safe.
Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Coding style and printk's are cleaned up in subsequent patches
Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

A handlful of coding style issue cleaned up in the following patches.
Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

vidioc_g_tuner should not do any memset for the parameters. Core
already does that. In particular, V4L2 core now does some handling
for the tuner type, and the tuner-core module relies on that.

So, doing any memset there is a very bad idea.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMijhail Moreyra <mijhail.moreyra@gmail.com>
Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMijhail Moreyra <mijhail.moreyra@gmail.com>
Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMijhail Moreyra <mijhail.moreyra@gmail.com>
Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

[stoth@kernellabs.com: add it to the makefile and fix snd_card binding]
[liplianin@netup.ru: videobuf: Remove the videobuf_sg_dma_map/unmap functions]
Signed-off-by: NMijhail Moreyra <mijhail.moreyra@gmail.com>
Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NIgor M. Liplianin <liplianin@netup.ru>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

In stb0899_status stb0899_check_data the first read of STB0899_VSTATUS
could read old (from previous search) LOOP status bit and the search
fails on a good frequency.

With the patch more transponder could be locked and locks about 2*
faster.

Signed-off-by: Lutz Sammer<johns98@gmx.net>
Reviewed-by: Manu Abraham<manu@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The code here treated user pointers correctly, but the __user tags
weren't used correctly so it caused Sparse warnings:
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Currently the tuner is constantly powered causing these effects.
1. Remembering last tune channel causing corruptions of changing channel.
2. Causing corruption on other frontend.
3. Higher current in standby of demodulator with clock running.

Power sequence now follows;
Power Up
Tuner on -> Frontend suspend off -> Tuner clk on
Power Down
Frontend suspend on -> Tuner clk off -> Tuner off
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The tvp5150 video decoder has two operation modes to configure the video
standard used.

If auto-switch mode is enable, the device can sense the signal and detect which
video standard the device is operating. Also the device can be forced to use a
user defined video standard.

Each operation mode uses a different register and the bitmask values to
represent each standard is different.

So we add video standard constants for both autoswitch and no-autoswitch mode.
Signed-off-by: NJavier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Both mt9t001.c and mt9p031.c have two identical issues, those
being that they will need module.h inclusion for the upcoming
cleanup going on there, and that their dependencies don't limit
selection of configs that will fail to compile as follows:

The related config options are CONFIG_MEDIA_CONTROLLER and
CONFIG_VIDEO_V4L2_SUBDEV_API.  Looking at the code, it appears
that the driver was never intended to work without these enabled,
so add a dependency on CONFIG_VIDEO_V4L2_SUBDEV_API, which in
turn already has a dependency on CONFIG_MEDIA_CONTROLLER.
Reported-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Allow subdevs to return the detected standards
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

As msp3400 allows standards detection, add support for it. That
efectivelly means that devices with msp3400 can now implement
VIDIOC_QUERYSTD, and it will provide very good detection for
the standard, specially if combined with a video decoder detection.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Acked-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Instead of using V4L2_STD_ALL when no standard is detected,
trust that the maximum allowed standards are already filled by
the V4L2 core. It is better this way, as the bridge and/or the audio
decoder may have some extra restrictions to some video standards.

This also allow other devices like audio and tuners to contribute to
standards detection, when they support such feature.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

According with the V4L2 API spec:

	"When detection is not possible or fails, the set must contain
	 all standards supported by the current video input or output."

The V4L2 core has the mask with all supported standards already. So,
apply it. Driver and subdevs can then just remove standards from the
mask, as they're able of detecting audio, video and frames frequency.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Acked-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

There are several bugs at saa7115 standards detection:

After the fix, the driver is returning the proper standards,
as tested with 3 different broadcast sources:

On an invalid channel (without any TV signal):
[ 4394.931630] saa7115 15-0021: Status byte 2 (0x1f)=0xe0
[ 4394.931635] saa7115 15-0021: detected std mask = 00ffffff

With a PAL/M signal:
[ 4410.836855] saa7115 15-0021: Status byte 2 (0x1f)=0xb1
[ 4410.837727] saa7115 15-0021: Status byte 1 (0x1e)=0x82
[ 4410.837731] saa7115 15-0021: detected std mask = 00000900

With a NTSC/M signal:
[ 4422.383893] saa7115 15-0021: Status byte 2 (0x1f)=0xb1
[ 4422.384768] saa7115 15-0021: Status byte 1 (0x1e)=0x81
[ 4422.384772] saa7115 15-0021: detected std mask = 0000b000

Tests were done with a WinTV PVR USB2 Model 29xx card.
Reviewed-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This lock should be released as well on the error path.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: Patrick Boettcher <Patrick.Boettcher@dibcom.fr>
Cc: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Negate has higher precedence than bitwise AND.  I2C_M_RD is 0x1 so
the original code is equivelent to just checking if (!msg->flags).
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: Steven Toth <stoth@kernellabs.com>
Cc: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This reverts commit ea370943.

As reported by Stephen Rothwell:

After merging the v4l-dvb tree, today's linux-next build (x86_64
allmodconfig) failed like this:

ERROR: "sms_dbg" [drivers/media/dvb/siano/smsusb.ko] undefined!
ERROR: "sms_dbg" [drivers/media/dvb/siano/smsdvb.ko] undefined!

Caused by commit ea370943 ("[media] siano: apply debug flag to module
level").

Relevant config:
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_USB_DRV=m
CONFIG_SMS_SDIO_DRV=m
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

These are necessary to prevent dead-locks e.g. if one thread waits
in dqbuf at one end and another tries to queue a buffer at the
other end.
Signed-off-by: NMichael Olbrich <m.olbrich@pengutronix.de>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Pawel Osciak <pawel@osciak.com>
Acked-by: NPawel Osciak <pawel@osciak.com>
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch fixes mbus configuration between Mixer, SDO and HDMI.  The SDO
accepts only YUV444 on input. The HDMI in DVI mode accepts only RGB888. Now
Mixer is choosing proper output format depending on mbus format.
Signed-off-by: NTomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Current version of the driver does not support HDMI features
not present in DVI standard. Therefore DVI mode is used to
keep compatibility with DVI devices.
Signed-off-by: NTomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The TVOUT driver requires PM_RUNTIME support for proper clock
enabling.
Signed-off-by: NHatim Ali <hatim.rv@samsung.com>
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Simplifies the locking by moving the em28xx_init_extension() call until
em28xx_usb_probe() has finished with the dev->lock mutex. It therefore
makes the second and subsequent "plugging" events logically identical to
the first "plugging" event when the em28xx-dvb and em28xx-alsa modules
must be loaded (i.e. registered).

Basically, em28xx_usb_probe() requests that em28xx-dvb be loaded and
also triggers udev to initialise the V4L2 devices. These two events are
serialised by the dev->lock mutex but the order that they happen in is
undefined. But this has always been the case anyway.
Signed-off-by: NChris Rankin <rankincj@yahoo.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch just removes the prototypes for the two functions that I've already
deleted in my previous patches.
Signed-off-by: NChris Rankin <rankincj@yahoo.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This fixes the deadlock that occurs with either multiple PCTV 290e adapters or when a single PCTV 290e adapter is replugged.

For DVB devices, the device lock must now *not* be held when adding/removing either a device or an extension to the respective lists. (Because em28xx_init_dvb() will want to take the lock instead).

Conversely, for Audio-Only devices, the device lock *must* be held when adding/removing either a device or an extension to the respective lists.
Signed-off-by: NChris Rankin <rankincj@yahoo.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Currently, the stv090x driver only set the status bits to SCVYL when
there is a lock. This patch set the right bits even if there is no lock.
Signed-off-by: NGuy Martin <gmsoft@tuxicoman.be>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

--HPS

>From 18faaafc9cbbe478bb49023bbeae490149048560 Mon Sep 17 00:00:00 2001
Signed-off-by: NHans Petter Selasky <hselasky@c2i.net>
Acked-by: NManu Abraham <manu@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

With VDR streaming HDTV into network, generating an interrupt once per 16kb,
implemented in this patch, seems to support more robust throughput with HDTV.

Fix leaking almost 64kb data from the previous TS after changing the TS.
One effect of the old version was, that the DMA transfer and driver's
DMA buffer access might happen at the same time - a race condition.
Signed-off-by: NMarko M. Ristola <marko.ristola@kolumbus.fi>
Reviewed-by: NManu Abraham <manu@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

I noticed a stray 0x00 at init on DiSEqC bus (KNC1 DVB-S2) with a DiSEqC
tool analyzer.

I removed the register from initialization table and all seem to go well
(at least for my KNC board).
Signed-off-by: NFlorent Audebert <florent.audebert@anevia.com>
Acked-by: NManu Abraham <manu@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>