“1ac3836ce689e594b20c7c9855f64a63751c2d10”上不存在“README.md”
- 01 8月, 2017 3 次提交
-
-
由 Chao Yu 提交于
This patch adds to support plain project quota. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
This patch add new flag F2FS_EXTRA_ATTR storing in inode.i_inline to indicate that on-disk structure of current inode is extended. In order to extend, we changed the inode structure a bit: Original one: struct f2fs_inode { ... struct f2fs_extent i_ext; __le32 i_addr[DEF_ADDRS_PER_INODE]; __le32 i_nid[DEF_NIDS_PER_INODE]; } Extended one: struct f2fs_inode { ... struct f2fs_extent i_ext; union { struct { __le16 i_extra_isize; __le16 i_padding; __le32 i_extra_end[0]; }; __le32 i_addr[DEF_ADDRS_PER_INODE]; }; __le32 i_nid[DEF_NIDS_PER_INODE]; } Once F2FS_EXTRA_ATTR is set, we will steal four bytes in the head of i_addr field for storing i_extra_isize and i_padding. with i_extra_isize, we can calculate actual size of reserved space in i_addr, available attribute fields included in total extra attribute fields for current inode can be described as below: +--------------------+ | .i_mode | | ... | | .i_ext | +--------------------+ | .i_extra_isize |-----+ | .i_padding | | | .i_prjid | | | .i_atime_extra | | | .i_ctime_extra | | | .i_mtime_extra |<----+ | .i_inode_cs |<----- store blkaddr/inline from here | .i_xattr_cs | | ... | +--------------------+ | | | block address | | | +--------------------+ | .i_nid | +--------------------+ | node_footer | | (nid, ino, offset) | +--------------------+ Hence, with this patch, we would enhance scalability of f2fs inode for storing more newly added attribute. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
This patch tries to make below macros calculating max inline size, inline dentry field size considerring reserving size-changeable space: - MAX_INLINE_DATA - NR_INLINE_DENTRY - INLINE_DENTRY_BITMAP_SIZE - INLINE_RESERVED_SIZE Then, when inline_{data,dentry} options is enabled, it allows us to reserve inline space with different size flexibly for adding newly introduced inode attribute. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 04 5月, 2017 1 次提交
-
-
由 Chao Yu 提交于
Introduce CP_TRIMMED_FLAG to indicate all invalid block were trimmed before umount, so once we do mount with image which contain the flag, we don't record invalid blocks as undiscard one, when fstrim is being triggered, we can avoid issuing redundant discard commands. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 03 5月, 2017 1 次提交
-
-
由 Jin Qian 提交于
F2FS uses 4 bytes to represent block address. As a result, supported size of disk is 16 TB and it equals to 16 * 1024 * 1024 / 2 segments. Signed-off-by: NJin Qian <jinqian@google.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 25 4月, 2017 1 次提交
-
-
由 Jaegeuk Kim 提交于
This patch adds parentheses for macro variables more in include/linux/f2fs_fs.h. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 28 2月, 2017 2 次提交
-
-
由 Chao Yu 提交于
In scenario of intensively node allocation, free nids will be ran out soon, then it needs to stop to load free nids by traversing NAT blocks, in worse case, if NAT blocks does not be cached in memory, it generates IOs which slows down our foreground operations. In order to speed up node allocation, in this patch we introduce a new free_nid_bitmap array, so there is an bitmap table for each NAT block, Once the NAT block is loaded, related bitmap cache will be switched on, and bitmap will be set during traversing nat entries in NAT block, later we can query and update nid usage status in memory completely. With such implementation, I expect performance of node allocation can be improved in the long-term after filesystem image is mounted. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patches adds bitmaps to represent empty or full NAT blocks containing free nid entries. If we can find valid crc|cp_ver in the last block of checkpoint pack, we'll use these bitmaps when building free nids. In order to avoid checkpointing burden, up-to-date bitmaps will be flushed only during umount time. So, normally we can get this gain, but when power-cut happens, we rely on fsck.f2fs which recovers this bitmap again. After this patch, we build free nids from nid #0 at mount time to make more full NAT blocks, but in runtime, we check empty NAT blocks to load free nids without loading any NAT pages from disk. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 29 1月, 2017 1 次提交
-
-
由 Jaegeuk Kim 提交于
This patch implements IO alignment by filling dummy blocks in DATA and NODE write bios. If we can guarantee, for example, 32KB or 64KB for such the IOs, we can eliminate underlying dummy page problem which FTL conducts in order to close MLC or TLC partial written pages. Note that, - it requires "-o mode=lfs". - IO size should be power of 2, not exceed BIO_MAX_PAGES, 256. - read IO is still 4KB. - do checkpoint at fsync, if dummy NODE page was written. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 26 11月, 2016 1 次提交
-
-
由 Jaegeuk Kim 提交于
This patch implements multiple devices support for f2fs. Given multiple devices by mkfs.f2fs, f2fs shows them entirely as one big volume under one f2fs instance. Internal block management is very simple, but we will modify block allocation and background GC policy to boost IO speed by exploiting them accoording to each device speed. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 01 10月, 2016 1 次提交
-
-
由 Jaegeuk Kim 提交于
Previously, we used cp_version only to detect recoverable dnodes. In order to avoid same garbage cp_version, we needed to truncate the next dnode during checkpoint, resulting in additional discard or data write. If we can distinguish this by using crc in addition to cp_version, we can remove this overhead. There is backward compatibility concern where it changes node_footer layout. So, this patch introduces a new checkpoint flag, CP_CRC_RECOVERY_FLAG, to detect new layout. New layout will be activated only when this flag is set. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 15 4月, 2016 1 次提交
-
-
由 Chao Yu 提交于
With below serials, we will lose parts of dirents: 1) mount f2fs with inline_dentry option 2) echo 1 > /sys/fs/f2fs/sdX/dir_level 3) mkdir dir 4) touch 180 files named [1-180] in dir 5) touch 181 in dir 6) echo 3 > /proc/sys/vm/drop_caches 7) ll dir ls: cannot access 2: No such file or directory ls: cannot access 4: No such file or directory ls: cannot access 5: No such file or directory ls: cannot access 6: No such file or directory ls: cannot access 8: No such file or directory ls: cannot access 9: No such file or directory ... total 360 drwxr-xr-x 2 root root 4096 Feb 19 15:12 ./ drwxr-xr-x 3 root root 4096 Feb 19 15:11 ../ -rw-r--r-- 1 root root 0 Feb 19 15:12 1 -rw-r--r-- 1 root root 0 Feb 19 15:12 10 -rw-r--r-- 1 root root 0 Feb 19 15:12 100 -????????? ? ? ? ? ? 101 -????????? ? ? ? ? ? 102 -????????? ? ? ? ? ? 103 ... The reason is: when doing the inline dir conversion, we didn't consider that directory has hierarchical hash structure which can be configured through sysfs interface 'dir_level'. By default, dir_level of directory inode is 0, it means we have one bucket in hash table located in first level, all dirents will be hashed in this bucket, so it has no problem for us to do the duplication simply between inline dentry page and converted normal dentry page. However, if we configured dir_level with the value N (greater than 0), it will expand the bucket number of first level hash table by 2^N - 1, it hashs dirents into different buckets according their hash value, if we still move all dirents to first bucket, it makes incorrent locating for inline dirents, the result is, although we can iterate all dirents through ->readdir, we can't stat some of them in ->lookup which based on hash table searching. This patch fixes this issue by rehashing dirents into correct position when converting inline directory. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 05 4月, 2016 1 次提交
-
-
由 Kirill A. Shutemov 提交于
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: NMichal Hocko <mhocko@suse.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 2月, 2016 5 次提交
-
-
由 Chao Yu 提交于
Introduce a new structure f2fs_journal to wrap journal info in struct f2fs_summary_block for readability. struct f2fs_journal { union { __le16 n_nats; __le16 n_sits; }; union { struct nat_journal nat_j; struct sit_journal sit_j; struct f2fs_extra_info info; }; } __packed; struct f2fs_summary_block { struct f2fs_summary entries[ENTRIES_IN_SUM]; struct f2fs_journal journal; struct summary_footer footer; } __packed; Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch preallocates data blocks for buffered aio writes. With this patch, we can avoid redundant locking and unlocking of node pages given consecutive aio request. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Sheng Yong 提交于
Signed-off-by: NSheng Yong <shengyong1@huawei.com> Reviewed-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
There are redundant pointer conversion in following call stack: - at position a, inode was been converted to f2fs_file_info. - at position b, f2fs_file_info was been converted to inode again. - truncate_blocks(inode,..) - fi = F2FS_I(inode) ---a - ADDRS_PER_PAGE(node_page, fi) - addrs_per_inode(fi) - inode = &fi->vfs_inode ---b - f2fs_has_inline_xattr(inode) - fi = F2FS_I(inode) - is_inode_flag_set(fi,..) In order to avoid unneeded conversion, alter ADDRS_PER_PAGE and addrs_per_inode to acept parameter with type of inode pointer. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Shuoran Liu 提交于
This patch introduces lifetime IO write statistics exposed to the sysfs interface. The write IO amount is obtained from block layer, accumulated in the file system and stored in the hot node summary of checkpoint. Signed-off-by: NShuoran Liu <liushuoran@huawei.com> Signed-off-by: NPengyang Hou <houpengyang@huawei.com> [Jaegeuk Kim: add sysfs documentation] Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 15 12月, 2015 1 次提交
-
-
由 Jaegeuk Kim 提交于
This patch adds MAX_VOLUME_NAME to sync with f2fs-tools. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 22 8月, 2015 1 次提交
-
-
由 Chao Yu 提交于
Add annotation to let us know more clearly about space utilization information of regular dentry and inline dentry. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 29 5月, 2015 3 次提交
-
-
由 Jaegeuk Kim 提交于
This definitions will be used by inode and superblock for encyption. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch introduces a feature in superblock, which will indicate any new features for f2fs. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
The mkfs.f2fs remains kernel version in superblock, but f2fs module has not added that so far. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 11 4月, 2015 1 次提交
-
-
由 Jaegeuk Kim 提交于
If f2fs was corrupted with missing dot dentries, it needs to recover them after fsck.f2fs detection. The underlying precedure is: 1. The fsck.f2fs remains F2FS_INLINE_DOTS flag in directory inode, if it detects missing dot dentries. 2. When f2fs looks up the corrupted directory, it triggers f2fs_add_link with proper inode numbers and their dot and dotdot names. 3. Once f2fs recovers the directory without errors, it removes F2FS_INLINE_DOTS finally. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 04 3月, 2015 1 次提交
-
-
由 Chao Yu 提交于
Rename a filed name from 'blk_addr' to 'blk' in struct {f2fs_extent,extent_info} as annotation of this field descripts its meaning well to us. By this way, we can avoid long statement in code of following patches. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 12 2月, 2015 2 次提交
-
-
由 Jaegeuk Kim 提交于
This patch adds two macros for transition between byte and block offsets. Currently, f2fs only supports 4KB blocks, so use the default size for now. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch adds FASTBOOT flag into checkpoint as follows. - CP_UMOUNT_FLAG is set when system is umounted. - CP_FASTBOOT_FLAG is set when intermediate checkpoint having node summaries was done. So, if you get CP_UMOUNT_FLAG from checkpoint, the system was umounted cleanly. Instead, if there was sudden-power-off, you can get CP_FASTBOOT_FLAG or nothing. Reviewed-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 10 1月, 2015 1 次提交
-
-
由 Jaegeuk Kim 提交于
In do_recover_data, we find and update previous node pages after updating its new block addresses. After then, we call fill_node_footer without reset field, we erase its cold bit so that this new cold node block is written to wrong log area. This patch fixes not to miss its old flag. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 05 11月, 2014 2 次提交
-
-
由 Jaegeuk Kim 提交于
Let's remove unused macro. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch simplifies the inline_data usage with the following rule. 1. inline_data is set during the file creation. 2. If new data is requested to be written ranges out of inline_data, f2fs converts that inode permanently. 3. There is no cases which converts non-inline_data inode to inline_data. 4. The inline_data flag should be changed under inode page lock. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 04 11月, 2014 2 次提交
-
-
由 Chao Yu 提交于
This patch defines macro/inline dentry structure, and adds some helpers for inline dir infrastructure. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch fixes to use highmem for directory pages. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 24 9月, 2014 1 次提交
-
-
由 Chao Yu 提交于
Block size in f2fs is 4096 bytes, so theoretically, f2fs can support 4096 bytes sector device at maximum. But now f2fs only support 512 bytes size sector, so block device such as zRAM which uses page cache as its block storage space will not be mounted successfully as mismatch between sector size of zRAM and sector size of f2fs supported. In this patch we support large sector size in f2fs, so block device with sector size of 512/1024/2048/4096 bytes can be supported in f2fs. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 10 9月, 2014 1 次提交
-
-
由 Jaegeuk Kim 提交于
This patch adds sbi->need_fsck to conduct fsck.f2fs later. This flag can only be removed by fsck.f2fs. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 23 8月, 2014 1 次提交
-
-
由 Chao Yu 提交于
This patch introduces DEF_NIDS_PER_INODE/GET_ORPHAN_BLOCKS/F2FS_CP_PACKS macro instead of numbers in code for readability. change log from v1: o fix typo pointed out by Jaegeuk Kim. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 22 8月, 2014 1 次提交
-
-
由 Chao Yu 提交于
Theoretically, our total inodes number is the same as total node number, but there are three node ids are reserved in f2fs, they are 0, 1 (node nid), and 2 (meta nid), and they should never be used by user, so our total/free inode number calculated in ->statfs is wrong. This patch indroduces F2FS_RESERVED_NODE_NUM and then fixes this issue by recalculating total/free inode number with the macro. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 04 6月, 2014 2 次提交
-
-
由 Changman Lee 提交于
f2fs's cp has one page which consists of struct f2fs_checkpoint and version bitmap of sit and nat. To support lots of segments, we need more blocks for sit bitmap. So let's arrange sit bitmap as following: +-----------------+------------+ | f2fs_checkpoint | sit bitmap | | + nat bitmap | | +-----------------+------------+ 0 4k N blocks Signed-off-by: NChangman Lee <cm224.lee@samsung.com> [Jaegeuk Kim: simple code change for readability] Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
When large directory feathure is enable, We have one case which could cause overflow in dir_buckets() as following: special case: level + dir_level >= 32 and level < MAX_DIR_HASH_DEPTH / 2. Here we define MAX_DIR_BUCKETS to limit the return value when the condition could trigger potential overflow. Changes from V1 o modify description of calculation in f2fs.txt suggested by Changman Lee. Suggested-by: NChangman Lee <cm224.lee@samsung.com> Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 07 5月, 2014 1 次提交
-
-
由 Chao Yu 提交于
Introduce help macro ADDRS_PER_PAGE() to get the number of address pointers in direct node or inode. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
- 27 2月, 2014 1 次提交
-
-
由 Jaegeuk Kim 提交于
This patch introduces an i_dir_level field to support large directory. Previously, f2fs maintains multi-level hash tables to find a dentry quickly from a bunch of chiild dentries in a directory, and the hash tables consist of the following tree structure as below. In Documentation/filesystems/f2fs.txt, ---------------------- A : bucket B : block N : MAX_DIR_HASH_DEPTH ---------------------- level #0 | A(2B) | level #1 | A(2B) - A(2B) | level #2 | A(2B) - A(2B) - A(2B) - A(2B) . | . . . . level #N/2 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B) . | . . . . level #N | A(4B) - A(4B) - A(4B) - A(4B) - A(4B) - ... - A(4B) But, if we can guess that a directory will handle a number of child files, we don't need to traverse the tree from level #0 to #N all the time. Since the lower level tables contain relatively small number of dentries, the miss ratio of the target dentry is likely to be high. In order to avoid that, we can configure the hash tables sparsely from level #0 like this. level #0 | A(2B) - A(2B) - A(2B) - A(2B) level #1 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B) . | . . . . level #N/2 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B) . | . . . . level #N | A(4B) - A(4B) - A(4B) - A(4B) - A(4B) - ... - A(4B) With this structure, we can skip the ineffective tree searches in lower level hash tables. This patch adds just a facility for this by introducing i_dir_level in f2fs_inode. Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-