- 16 9月, 2011 8 次提交
-
-
由 Giuseppe CAVALLARO 提交于
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
New GMAC chips have an extra register to indicate the presence of the optional features/functions of the DMA core. This patch adds this support and all the HW cap are exported via debugfs. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
The Synopsys ID is now passed from the MAC core to the main. This info will be used for managing the HW cap register (supported in the new GMAC generations). Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
This patch adds the following debugFs entry to dump the RX/TX DMA rings: /sys/kernel/debug/stmmaceth/descriptors_status This is an example: ======================= RX descriptor ring ======================= [0] DES0=0x85ee0320 DES1=0x1fff1fff BUF1=0x5fae2022 BUF2=0x0 [1] DES0=0x85ee0320 DES1=0x1fff1fff BUF1=0x5fae0022 BUF2=0x0 [2] DES0=0x81460320 DES1=0x1fff1fff BUF1=0x5f9dd022 BUF2=0x0 Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
This patch adds the MMC management counters support. MMC module is an extension of the register address space and all the hardware counters can be accessed via ethtoo -S ethX. Note that, the MMC interrupts remain masked and the logic to handle this kind of interrupt will be added later (if actually useful). Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Deepak Sikri 提交于
On some platforms e.g. SPEAr the wake up irq differs from the GMAC interrupt source. With this patch an external wake up irq can be passed through the platform code and named as "eth_wake_irq". In case the wake up interrupt is not passed from the platform so the driver will continue to use the mac irq (ndev->irq) Signed-off-by: NDeepak Sikri <deepak.sikri@st.com> Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
DWMAC Management Counters (MMC) are not fully support. The minimal support added in the past allowed to only disable counters (if present) and mask their interrupts. This patch prepares the driver to support the MMC removing obsolete code. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
This patch removes a piece of code (actually commented) only useful for some ST platforms in the past. This kind of setting now can be done by using the platform callbacks provided in linux/stmmac.h (see the stmmac.txt for further details). Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 8月, 2011 1 次提交
-
-
由 Jeff Kirsher 提交于
Based on finds for Stephen Rothwell, where current defconfig's enable a ethernet driver and it is not compiled due to the newly added NET_VENDOR_* component of Kconfig. This patch enables all the "new" Kconfig options so that current defconfig's will continue to compile the expected drivers. In addition, by enabling all the new Kconfig options does not add any un-expected options. CC: Stephen Rothwll <sfc@canb.auug.org.au> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 18 8月, 2011 1 次提交
-
-
由 Jiri Pirko 提交于
Use IFF_UNICAST_FTL to find out if driver handles unicast address filtering. In case it does not, promisc mode is entered. Patch also fixes following drivers: stmmac, niu: support uc filtering and yet it propagated ndo_set_multicast_list bna, benet, pxa168_eth, ks8851, ks8851_mll, ksz884x : has set ndo_set_rx_mode but do not support uc filtering Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 8月, 2011 1 次提交
-
-
由 Jeff Kirsher 提交于
Move the STMicroelectronics driver into driver/net/ethernet/stmicro/ and make the necessary Kconfig and Makefile changes. CC: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-