- 12 4月, 2009 5 次提交
-
-
由 Mark Brown 提交于
The input core will add entropy to the pool so this flag is not needed. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Eric Miao 提交于
Noises can be introduced when LCD signals are being driven, some platforms provide a signal to assist the synchronization of this sampling procedure. Signed-off-by: NEric Miao <eric.miao@marvell.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Arjan van de Ven 提交于
There is no need to issue serialize_rcu() after adding a new handle to the list of handles associated with the device because new events will "see" the new handle in the list immediately. Remove it so we can boot a little bit faster. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Arjan van de Ven 提交于
There are several DMI tables in the i8042 (keyboard) driver already, but not one for the i8042.reset option. This patch adds such an option. Two users for this table are added as well, the MSI Wind U-100 and the LG X110. The MSI Wind also needs to be in the "don't trust the pnp data" for the touchpad to work on my machine. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Arjan van de Ven 提交于
Some touchpads don't reset right the first time (MSI Wind U-100 for example). This patch will retry the reset up to 5 times. In addition, on x86, we don't fail entire i8042 initialization if controller reset fails in hope that keyboard port will still be functional and user will still get a working keyboard. This is especially important on netbooks. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 08 4月, 2009 1 次提交
-
-
由 Dmitry Torokhov 提交于
Reported-by: NKenneth Crudup <kenny@panix.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 10 3月, 2009 5 次提交
-
-
由 Dmitry Torokhov 提交于
Everyone adds their driver to the end of the list, hopefully if it is in alphabetical order new drivers will spread out a bit and I can merge them more easily. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Michael Hennerich 提交于
[randy.dunlap@oracle.com: don't use bus_id] [dtor@mail.ru: locking and other fixups] Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Michael Hennerich 提交于
[dtor@mail.ru: locking and other fixups] Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NBryan Wu <bryan.wu@analog.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Michael Hennerich 提交于
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Phil Sutter 提交于
Mikrotik's Routerboard 532 has two builtin buttons, from which one triggers a hardware reset. The other one is accessible through GPIO pin 1. Sadly, this pin is being multiplexed with UART0 input, so enabling it as interrupt source (as implied by the gpio-keys driver) is not possible unless UART0 has been turned off. The later one though is a rather bad idea as the Routerboard is an embedded device with only a single serial port, so it's almost always used as serial console device. This patch adds a driver based on INPUT_POLLDEV, which disables the UART and reconfigures GPIO pin 1 temporarily while reading the button state. This procedure works fine and has been tested as part of another, unpublished driver for this device. Signed-off-by: NPhil Sutter <n0-1@freewrt.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 09 3月, 2009 10 次提交
-
-
由 Daniel Mack 提交于
This patch adds a generic driver for rotary encoders connected to GPIO pins of a system. It relies on gpiolib and generic hardware irqs. The documentation that also comes with this patch explains the concept and how to use the driver. Signed-off-by: NDaniel Mack <daniel@caiaq.de> Tested-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Helge Deller 提交于
On parisc machines, which don't have HIL, removing the hilkbd module panics the kernel. Fix this by adding proper implementations for the probe and remove functions to the parisc_driver structure. A few functions were renamed to clean up the code and make it easier readable. Disable the MODULE_DEVICE_TABLE() macro on parisc since the kernel module autoloader should instead prefer the hp_sdc driver which takes care of full HIL support, including HIL mouse and HIL tablets. [dtor@mail.ru: fix some section markups] Signed-off-by: NHelge Deller <deller@gmx.de> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Daniel Mierswa 提交于
The volume up and down keys on the Fujitsu Siemens Amilo PA 1510 laptop won't generate release events, so we have to do that. Use the same way that is already used with other models. Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Daniel Mierswa 提交于
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Mark Brown 提交于
This patch implements accelerated touchscreen support for the Marvell Zylonite development platform, supporting pen down interrupts and continuous mode data transfers. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Mike Rapoport 提交于
Add BTN_TOUCH event reporting to ucb1400_ts and accelerated mainstone-wm97xx touchscreen drivers. Together with previously posted similar patch for wm97xx-core this will make all touchscreen drivers behave consistently wrt. BTN_TOUCH. Signed-off-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Mark Brown 提交于
This should make no practical difference since the Mainstone can't be SMP but it is more correct. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Mike Rapoport 提交于
Android expects BTN_TOUCH events when pen state changes. Add BTN_TOUCH event reporting to allow use of wm97xx touchscreen controller wiht Android devices. Signed-off-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Tested-by: NAlessio Sangalli <alesan@manoweb.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
-
- 04 3月, 2009 9 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: ixp4xx - Fix qmgr_request_queue build failure crypto: api - Fix module load deadlock with fallback algorithms
-
由 Krzysztof Hałasa 提交于
There is another user of IXP4xx queue manager, fix it. Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Linus Torvalds 提交于
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: don't allow setuid to succeed if the user does not have rt bandwidth sched_rt: don't start timer when rt bandwidth disabled
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: oprofile: don't set counter width from cpuid on Core2 x86: fix init_memory_mapping() to handle small ranges
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip由 Linus Torvalds 提交于
* 'tracing/mmiotrace' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86 mmiotrace: fix race with release_kmmio_fault_page() x86 mmiotrace: improve handling of secondary faults x86 mmiotrace: split set_page_presence() x86 mmiotrace: fix save/restore page table state x86 mmiotrace: WARN_ONCE if dis/arming a page fails x86: add far read test to testmmiotrace x86: count errors in testmmiotrace.ko
-
由 Linus Torvalds 提交于
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: rcu: Teach RCU that idle task is not quiscent state at boot
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] fix lots of ARM __devexit sillyness [ARM] 5417/1: Set the correct cacheid for ARMv6 CPUs with ARMv7 style MMU [ARM] 5416/1: Use unused address in v6_early_abort [ARM] 5411/1: S3C64XX: Fix EINT unmask [ARM] at91: fix for Atmel AT91 powersaving [ARM] RiscPC: Fix etherh oops
-
由 Russell King 提交于
`iop_adma_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o `mv_xor_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o `mv64xxx_i2c_unmap_regs' referenced in section `.devinit.text' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o `mv64xxx_i2c_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o `orion_nand_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o `pxafb_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 03 3月, 2009 10 次提交
-
-
由 Catalin Marinas 提交于
The cacheid_init() function assumes that if cpu_architecture() returns 7, the caches are VIPT_NONALIASING. The cpu_architecture() function returns the version of the supported MMU features (e.g. TEX remapping) but it doesn't make any assumptions about the cache type. The patch adds the checking of the Cache Type Register for the ARMv7 format. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Seth Forshee 提交于
The target of the strex instruction to clear the exlusive monitor is currently the top of the stack. If the store succeeeds this corrupts r0 in pt_regs. Use the next stack location instead of the current one to prevent any chance of corrupting an in-use address. Signed-off-by: NSeth Forshee <seth.forshee@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Tim Blechmann 提交于
Impact: fix stuck NMIs and non-working oprofile on certain CPUs Resetting the counter width of the performance counters on Intel's Core2 CPUs, breaks the delivery of NMIs, when running in x86_64 mode. This should fix bug #12395: http://bugzilla.kernel.org/show_bug.cgi?id=12395Signed-off-by: NTim Blechmann <tim@klingt.org> Signed-off-by: NRobert Richter <robert.richter@amd.com> LKML-Reference: <20090303100412.GC10085@erda.amd.com> Cc: <stable@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
Impact: fix failed EFI bootup in certain circumstances Ying Huang found init_memory_mapping() has problem with small ranges less than 2M when he tried to direct map the EFI runtime code out of max_low_pfn_mapped. It turns out we never considered that case and didn't check the range... Reported-by: NYing Huang <ying.huang@intel.com> Signed-off-by: NYinghai Lu <yinghai@kernel.org> Cc: Brian Maly <bmaly@redhat.com> LKML-Reference: <49ACDDED.1060508@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Linus Torvalds 提交于
This reverts commit 155b25bc, which was totally wrong - the "embedded" options still exists (very much so) even on non-embedded platforms. It's just that we don't bother with actually asking about them when we're not embedded, we just take their default values (which is usually 'y' - the options add features that may not be worth it in a constrained environment). Noticed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/i915: Fix use-before-null-check in i915_irq_emit(). drm: Avoid client deadlocks when the master disappears. drm: Wake up all lock waiters when the master disappears. drm: Don't return ERESTARTSYS to user-space.
-
由 Eric Anholt 提交于
This could be triggered by a client asking to emit an irq when the device wasn't initialized. Signed-off-by: NEric Anholt <eric@anholt.net> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Thomas Hellstrom 提交于
This is done by 1) Wake up lock waiters when we close the master file descriptor. Not when the master structure is removed, since the latter requires the waiters themselves to release the refcount on the master structure -> Deadlock. 2) Send a SIGTERM to all clients waiting for the lock. Normally these clients will get a SIGPIPE when the X server dies, but clients may also spin trying to grab the DRM lock, without getting any sort of notification. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Thomas Hellstrom 提交于
Currently only one waiter is woken up, leaving other waiters hanging waiting for the DRM lock. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Thomas Hellstrom 提交于
That return code is for in-kernel use only. Use EINTR instead. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-