- 20 2月, 2018 23 次提交
-
-
由 Rex Zhu 提交于
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Rex Zhu 提交于
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
We only need to flush the HDP here, not invalidate the TLB. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Separate tlb invalidation and hdp flushing and move the HDP flush to the caller. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Needed to flush and invalidate the HDP block using the CPU. v2: use preferred register on soc15. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: Samuel Li <Samuel.Li@amd.com> (v1)
-
由 Alex Deucher 提交于
Needed to flush and invalidate the HDP block using the CPU. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NSamuel Li <Samuel.Li@amd.com>
-
由 Alex Deucher 提交于
Needed to flush and invalidate the HDP block using the CPU. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NSamuel Li <Samuel.Li@amd.com>
-
由 Alex Deucher 提交于
Needed to flush and invalidate the HDP block using the CPU. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NSamuel Li <Samuel.Li@amd.com>
-
由 Alex Deucher 提交于
Needed to properly flush the HDP cache with the CPU from rather than the GPU. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NSamuel Li <Samuel.Li@amd.com>
-
由 Andres Rodriguez 提交于
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAndres Rodriguez <andresx7@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Andres Rodriguez 提交于
We follow the same approach as gfx8. The only changes are register access macros. Tested on vega10. The execution latency results fall within the expected ranges from the polaris10 data. Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAndres Rodriguez <andresx7@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Evan Quan 提交于
Signed-off-by: NEvan Quan <evan.quan@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Evan Quan 提交于
V2: reuse the SMUThermal structure defined in pp_thermal.h Signed-off-by: NEvan Quan <evan.quan@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Evan Quan 提交于
V2: move the SMU7Thermal structure to newly created header file Signed-off-by: NEvan Quan <evan.quan@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Evan Quan 提交于
V2: new header file to hold the common SMU7Thermal structure Signed-off-by: NEvan Quan <evan.quan@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Populate the hwmon temp range as part of thermal controller setup. Signed-off-by: NEvan Quan <evan.quan@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Evan Quan 提交于
Added a new callback for asic specific backends to specify the temperature ranges. Signed-off-by: NEvan Quan <evan.quan@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Evan Quan 提交于
This will be used by powerplay to update the dpm temp range structure used to interface with hwmon. Signed-off-by: NEvan Quan <evan.quan@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Evan Quan 提交于
drm/amd/powerplay: correct PP_TemperatureRange member type since negative values are part of the valid range Signed-off-by: NEvan Quan <evan.quan@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Evan Quan 提交于
other parameter Signed-off-by: NEvan Quan <evan.quan@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Evan Quan 提交于
Unused. v2: squash in warning fix (Harry) Signed-off-by: NEvan Quan <evan.quan@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Dmitry Rozhkov 提交于
printk format strings accepting a single subsequent argument are shorter thus easier to read. Instead of having format strings accepting 3 different arguments pointing to first 3 bytes of the same buffer rewrite the format string to accept only one argument - the buffer - with "%3ph" specifier. Signed-off-by: NDmitry Rozhkov <dmitry.rozhkov@linux.intel.com> Suggested-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Julia Lawall 提交于
PP_ASSERT_WITH_CODE prints a newline at the end of the message string, so the message string does not need to include a newline explicitly. Done using Coccinelle. Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 16 2月, 2018 3 次提交
-
-
git://anongit.freedesktop.org/drm/drm-misc由 Dave Airlie 提交于
Add HDCP support to i915 drm driver. * tag 'topic/hdcp-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc: (26 commits) drm/i915: fix misalignment in HDCP register def drm/i915: Reauthenticate HDCP on failure drm/i915: Detect panel's hdcp capability drm/i915: Optimize HDCP key load drm/i915: Retry HDCP bksv read drm/i915: Connector info in HDCP debug msgs drm/i915: Stop encryption for repeater with no sink drm/i915: Handle failure from 2nd stage HDCP auth drm/i915: Downgrade hdcp logs from INFO to DEBUG_KMS drm/i915: Restore HDCP DRM_INFO when with no downstream drm/i915: Check for downstream topology errors drm/i915: Start repeater auth on READY/CP_IRQ drm/i915: II stage HDCP auth for repeater only drm/i915: Extending HDCP for HSW, BDW and BXT+ drm/i915/dp: Fix compilation of intel_dp_hdcp_check_link drm/i915: Only disable HDCP when it's active drm/i915: Don't allow HDCP on PORT E/F drm/i915: Implement HDCP for DisplayPort drm/i915: Implement HDCP for HDMI drm/i915: Add function to output Aksv over GMBUS ...
-
git://anongit.freedesktop.org/drm/drm-misc由 Dave Airlie 提交于
drm-misc-next for 4.17: UAPI Changes: - drm/vc4: Expose performance counters to userspace (Boris) Cross-subsystem Changes: - MAINTAINERS: Linus to maintain panel-arm-versatile in -misc (Linus) Core Changes: - Only use swiotlb when necessary (Chunming) Driver Changes: - drm/panel: Add support for ARM Versatile panels (Linus) - pl111: Improvements around versatile panel support (Linus) ---------------------------------------- Tagged on 2018-02-06: drm-misc-next for 4.17: UAPI Changes: - Validate mode flags + type (Ville) - Deprecate unused mode flags PIXMUX, BCAST (Ville) - Deprecate unused mode types BUILTIN, CRTC_C, CLOCK_C, DEFAULT (Ville) Cross-subsystem Changes: - MAINTAINERS: s/Daniel/Maarten/ for drm-misc (Daniel) Core Changes: - gem: Export gem functions for drivers to use (Samuel) - bridge: Introduce bridge timings in drm_bridge (Linus) - dma-buf: Allow exclusive fence to be bundled in fence array when calling reservation_object_get_fences_rcu (Christian) - dp: Add training pattern 4 and HBR3 support to dp helpers (Manasi) - fourcc: Add alpha bit to formats to avoid driver format LUTs (Maxime) - mode: Various cleanups + add new device-wide .mode_valid hook (Ville) - atomic: Fix state leak when non-blocking commits fail (Leo) NOTE: IIRC, this was cross-picked to -fixes so it might fall out - crc: Allow polling on the data fd (Maarten) Driver Changes: - bridge/vga-dac: Add THS8134* support (Linus) - tinydrm: Various MIPI DBI improvements/cleanups (Noralf) - bridge/dw-mipi-dsi: Cleanups + use create_packet helper (Brian) - drm/sun4i: Add Display Engine frontend support (Maxime) - drm/sun4i: Add zpos support + increase num planes from 2 to 4 (Maxime) - various: Use drm_mode_get_hv_timing() to fill plane clip rectangle (Ville) - stm: Add 8-bit clut support, add dsi phy v1.31 support, +fixes (Phillipe) Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Chunming Zhou <david1.zhou@amd.com> Cc: Samuel Li <Samuel.Li@amd.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Brian Norris <briannorris@chromium.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Christian König <christian.koenig@amd.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Leo (Sunpeng) Li <sunpeng.li@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> * tag 'drm-misc-next-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc: (115 commits) drm/radeon: only enable swiotlb path when need v2 drm/amdgpu: only enable swiotlb alloc when need v2 drm: add func to get max iomem address v2 drm/vc4: Expose performance counters to userspace drm: Print the pid when debug logging an ioctl error. drm/stm: ltdc: remove non-alpha color formats on layer 2 for older hw drm/stm: ltdc: add non-alpha color formats drm/bridge/synopsys: dsi: Add 1.31 version support drm/bridge/synopsys: dsi: Add read feature drm/pl111: Support multiple endpoints on the CLCD drm/pl111: Support variants with broken VBLANK drm/pl111: Support variants with broken clock divider drm/pl111: Handle the Versatile RGB/BGR565 mode drm/pl111: Properly detect the ARM PL110 variants drm/panel: Add support for ARM Versatile panels drm/panel: Device tree bindings for ARM Versatile panels drm/bridge: Rename argument from crtc to bridge drm/crc: Add support for polling on the data fd. drm/sun4i: Use drm_mode_get_hv_timing() to populate plane clip rectangle drm/rcar-du: Use drm_mode_get_hv_timing() to populate plane clip rectangle ...
-
git://anongit.freedesktop.org/drm/drm-intel由 Dave Airlie 提交于
UAPI Changes: - Userspace whitelist register GEN9_SLICE_COMMON_ECO_CHICKEN1 for GLK (Kenneth) - Non-existent PMU counters are not placed to sysfs (Tvrtko) - Add a note to deprecate I915_SET_COLORKEY_NONE and ignore it (Ville) * Intel DDX never ended using it, and implementation was wonky Core Changes: - Moved away from struct timeval into ktime_t in prep for 2038 (Arnd) * Merged the i915 portion through drm-tip, no core dependencies Driver Changes: - Base support for Icelake and Icelake PCH (Anusha, Rodrigo, Mahesh, Paulo, James, Kelvin) - Add AUX-F port support for Cannonlake (Rodrigo) - New DMC firmware for 1.07 Cannonlake (Anusha) * Go to linux-firmware.git to get it - Reject non-cursor planes nearly (3 px) out of screen on GLK/CNL (Imre) - Y/Yf modifiers restored for SKL+ sprites (Ville) - Compressed framebuffer support for sprites (Ville) - Tune down overly aggressive shrinking (Chris) - Shrink kmem caches when GPU is idle (Chris) - EDID bit-banging fallback for HDMI EDID (Stefan) - Don't boost the GPU when the waited request is already running (Chris) - Avoid GLK/BXT CDCLK frequency locking timeouts (Imre) - Limit DP link rate according to VBT on CNL+ (Jani) - Skip post-reset request emission if the engine is not idle (Chris) - Report any link training error on a fixed eDP panel as errors (Manasi) - DSI panel fixes for Bay Trail (Hans) - Selftest additions and improvements (Chris, Matt) - DMA fence test additions and accompanying fixes (Chris) - Power domain vs. register access fix (Maarten) - Squelch warnings for people with teensy framebuffers (stride < 512) (Maarten) - Increase Render/Media power gating hysteresis for Gen9+ (Chris) - HDMI vswing display workaround for Gen9+ (Ville) - GuC code cleanup and lockdep fixes (Sagar, Michal Wa.) - Continuously run hangcheck for simplicity (Chris) - Execlist debugging improvements (Chris) - GuC debugging improvements (Sujaritha, Michal Wa., Sagar) - Command parser boundary checks (Michal Srb) - Add a workaround for 3DSTATE_SAMPLE_PATTERN on CNL (Rafael) - Fix PMU enabling race condition (Tvrtko) - Usual smaller testing and debugging improvements * tag 'drm-intel-next-2018-02-07' of git://anongit.freedesktop.org/drm/drm-intel: (158 commits) drm/i915: Update DRIVER_DATE to 20180207 drm/i915/pmu: Fix PMU enable vs execlists tasklet race drm/i915/cnl: WaPipeControlBefore3DStateSamplePattern drm/i915/cmdparser: Do not check past the cmd length. drm/i915/cmdparser: Check reg_table_count before derefencing. drm/i915: Deprecate I915_SET_COLORKEY_NONE drm/i915: Skip post-reset request emission if the engine is not idle drm/i915/execlists: Move the reset bits to a more natural home drm/i915/selftests: Use a sacrificial context for hang testing drm/i915/selftests: Flush old resets between engines drm/i915/breadcrumbs: Drop request reference for the signaler thread drm/i915: Remove unbannable context spam from reset drm/i915/execlists: Remove the startup spam drm/i915: Show the GPU state when declaring wedged drm/i915: Always update the no_fbc_reason when disabling drm/i915: Add some newlines to intel_engine_dump() headers drm/i915: Report if an unbannable context is involved in a GPU hang drm/i915: Remove spurious DRM_ERROR for cancelled interrupts drm/i915/execlists: Flush GTIIR on clearing CS interrupts during reset drm/i915: reduce indent in pch detection ...
-
- 14 2月, 2018 3 次提交
-
-
由 Chunming Zhou 提交于
swiotlb expands our card accessing range, but its path always is slower than ttm pool allocation. So add condition to use it. v2: move a bit later Signed-off-by: NChunming Zhou <david1.zhou@amd.com> Reviewed-by: NMonk Liu <monk.liu@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180209024410.1469-3-david1.zhou@amd.com
-
由 Chunming Zhou 提交于
get the max io mapping address of system memory to see if it is over our card accessing range. v2: move checking later Signed-off-by: NChunming Zhou <david1.zhou@amd.com> Reviewed-by: NMonk Liu <monk.liu@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180209024410.1469-2-david1.zhou@amd.com
-
由 Chunming Zhou 提交于
it will be used to check if the driver needs swiotlb v2: Don't use inline, instead, move function to drm_memory.c (Michel Daenzer <michel@daenzer.net>) Signed-off-by: NChunming Zhou <david1.zhou@amd.com> Reviewed-by: NMonk Liu <monk.liu@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180209024410.1469-1-david1.zhou@amd.com
-
- 12 2月, 2018 7 次提交
-
-
由 Linus Torvalds 提交于
-
由 Al Viro 提交于
except, again, POLLFREE and POLL_BUSY_LOOP. With this, we finally get to the promised end result: - POLL{IN,OUT,...} are plain integers and *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly). Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull more poll annotation updates from Al Viro: "This is preparation to solving the problems you've mentioned in the original poll series. After this series, the kernel is ready for running for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done as a for bulk search-and-replace. After that, the kernel is ready to apply the patch to unify {de,}mangle_poll(), and then get rid of kernel-side POLL... uses entirely, and we should be all done with that stuff. Basically, that's what you suggested wrt KPOLL..., except that we can use EPOLL... instead - they already are arch-independent (and equal to what is currently kernel-side POLL...). After the preparations (in this series) switch to returning EPOLL... from ->poll() instances is completely mechanical and kernel-side POLL... can go away. The last step (killing kernel-side POLL... and unifying {de,}mangle_poll() has to be done after the search-and-replace job, since we need userland-side POLL... for unified {de,}mangle_poll(), thus the cherry-pick at the last step. After that we will have: - POLL{IN,OUT,...} *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly)" * 'work.poll2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: annotate ep_scan_ready_list() ep_send_events_proc(): return result via esed->res preparation to switching ->poll() to returning EPOLL... add EPOLLNVAL, annotate EPOLL... and event_poll->event use linux/poll.h instead of asm/poll.h xen: fix poll misannotation smc: missing poll annotations
-
git://github.com/jcmvbkbc/linux-xtensa由 Linus Torvalds 提交于
Pull xtense fix from Max Filippov: "Build fix for xtensa architecture with KASAN enabled" * tag 'xtensa-20180211' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: fix build with KASAN
-
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2由 Linus Torvalds 提交于
Pull nios2 update from Ley Foon Tan: - clean up old Kconfig options from defconfig - remove leading 0x and 0s from bindings notation in dts files * tag 'nios2-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: nios2: defconfig: Cleanup from old Kconfig options nios2: dts: Remove leading 0x and 0s from bindings notation
-
由 Max Filippov 提交于
The commit 917538e2 ("kasan: clean up KASAN_SHADOW_SCALE_SHIFT usage") removed KASAN_SHADOW_SCALE_SHIFT definition from include/linux/kasan.h and added it to architecture-specific headers, except for xtensa. This broke the xtensa build with KASAN enabled. Define KASAN_SHADOW_SCALE_SHIFT in arch/xtensa/include/asm/kasan.h Reported by: kbuild test robot <fengguang.wu@intel.com> Fixes: 917538e2 ("kasan: clean up KASAN_SHADOW_SCALE_SHIFT usage") Acked-by: NAndrey Konovalov <andreyknvl@google.com> Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
-
- 11 2月, 2018 4 次提交
-
-
由 Krzysztof Kozlowski 提交于
Remove old, dead Kconfig option INET_LRO. It is gone since commit 7bbf3cae ("ipv4: Remove inet_lro library"). Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org> Acked-by: NLey Foon Tan <ley.foon.tan@intel.com>
-
由 Mathieu Malaterre 提交于
Improve the DTS files by removing all the leading "0x" and zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading "0x" and Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" {} + For simplicity, two sed expressions were used to solve each warnings separately. To make the regex expression more robust a few other issues were resolved, namely setting unit-address to lower case, and adding a whitespace before the the opening curly brace: https://elinux.org/Device_Tree_Linux#Linux_conventions This is a follow up to commit 4c9847b7 ("dt-bindings: Remove leading 0x from bindings notation") Reported-by: NDavid Daney <ddaney@caviumnetworks.com> Suggested-by: NRob Herring <robh@kernel.org> Signed-off-by: NMathieu Malaterre <malat@debian.org> Acked-by: NLey Foon Tan <ley.foon.tan@intel.com>
-
由 Boris Brezillon 提交于
The V3D engine has various hardware counters which might be interesting to userspace performance analysis tools. Expose new ioctls to create/destroy a performance monitor object and query the counter values of this perfmance monitor. Note that a perfomance monitor is given an ID that is only valid on the file descriptor it has been allocated from. A performance monitor can be attached to a CL submission and the driver will enable HW counters for this request and update the performance monitor values at the end of the job. Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: NEric Anholt <eric@anholt.net> Signed-off-by: NEric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180112090926.12538-1-boris.brezillon@free-electrons.com
-
由 Eric Anholt 提交于
When we debug print what ioctl we're calling into, we include the pid. If you have multiple processes rendering simulataneously, the error return also needs the pid so you can see which of the ioctl calls was the one to fail. Signed-off-by: NEric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180130215643.11016-1-eric@anholt.netReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-