Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 22 9月, 2021 1 次提交
  3. 21 8月, 2021 1 次提交
    • V
      KVM: x86: hyper-v: Deactivate APICv only when AutoEOI feature is in use · 0f250a64
      由 Vitaly Kuznetsov 提交于 
      APICV_INHIBIT_REASON_HYPERV is currently unconditionally forced upon
SynIC activation as SynIC's AutoEOI is incompatible with APICv/AVIC. It is,
however, possible to track whether the feature was actually used by the
guest and only inhibit APICv/AVIC when needed.

TLFS suggests a dedicated 'HV_DEPRECATING_AEOI_RECOMMENDED' flag to let
Windows know that AutoEOI feature should be avoided. While it's up to
KVM userspace to set the flag, KVM can help a bit by exposing global
APICv/AVIC enablement.

Maxim:
   - always set HV_DEPRECATING_AEOI_RECOMMENDED in kvm_get_hv_cpuid,
     since this feature can be used regardless of AVIC

Paolo:
   - use arch.apicv_update_lock to protect the hv->synic_auto_eoi_used
     instead of atomic ops
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210810205251.424103-12-mlevitsk@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      0f250a64
  5. 13 8月, 2021 1 次提交
  7. 03 8月, 2021 3 次提交
  9. 18 6月, 2021 30 次提交
  11. 27 5月, 2021 1 次提交
    • W
      KVM: X86: hyper-v: Task srcu lock when accessing kvm_memslots() · da6d63a0
      由 Wanpeng Li 提交于 
         WARNING: suspicious RCU usage
   5.13.0-rc1 #4 Not tainted
   -----------------------------
   ./include/linux/kvm_host.h:710 suspicious rcu_dereference_check() usage!

  other info that might help us debug this:

  rcu_scheduler_active = 2, debug_locks = 1
   1 lock held by hyperv_clock/8318:
    #0: ffffb6b8cb05a7d8 (&hv->hv_lock){+.+.}-{3:3}, at: kvm_hv_invalidate_tsc_page+0x3e/0xa0 [kvm]

  stack backtrace:
  CPU: 3 PID: 8318 Comm: hyperv_clock Not tainted 5.13.0-rc1 #4
  Call Trace:
   dump_stack+0x87/0xb7
   lockdep_rcu_suspicious+0xce/0xf0
   kvm_write_guest_page+0x1c1/0x1d0 [kvm]
   kvm_write_guest+0x50/0x90 [kvm]
   kvm_hv_invalidate_tsc_page+0x79/0xa0 [kvm]
   kvm_gen_update_masterclock+0x1d/0x110 [kvm]
   kvm_arch_vm_ioctl+0x2a7/0xc50 [kvm]
   kvm_vm_ioctl+0x123/0x11d0 [kvm]
   __x64_sys_ioctl+0x3ed/0x9d0
   do_syscall_64+0x3d/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xae

kvm_memslots() will be called by kvm_write_guest(), so we should take the srcu lock.

Fixes: e880c6ea (KVM: x86: hyper-v: Prevent using not-yet-updated TSC page by secondary CPUs)
Reviewed-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: NWanpeng Li <wanpengli@tencent.com>
Message-Id: <1621339235-11131-4-git-send-email-wanpengli@tencent.com>
Reviewed-by: NSean Christopherson <seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      da6d63a0
  13. 18 3月, 2021 2 次提交
    • V
      KVM: x86: hyper-v: Don't touch TSC page values when guest opted for re-enlightenment · 0469f2f7
      由 Vitaly Kuznetsov 提交于 
      When guest opts for re-enlightenment notifications upon migration, it is
in its right to assume that TSC page values never change (as they're only
supposed to change upon migration and the host has to keep things as they
are before it receives confirmation from the guest). This is mostly true
until the guest is migrated somewhere. KVM userspace (e.g. QEMU) will
trigger masterclock update by writing to HV_X64_MSR_REFERENCE_TSC, by
calling KVM_SET_CLOCK,... and as TSC value and kvmclock reading drift
apart (even slightly), the update causes TSC page values to change.

The issue at hand is that when Hyper-V is migrated, it uses stale (cached)
TSC page values to compute the difference between its own clocksource
(provided by KVM) and its guests' TSC pages to program synthetic timers
and in some cases, when TSC page is updated, this puts all stimer
expirations in the past. This, in its turn, causes an interrupt storm
and L2 guests not making much forward progress.

Note, KVM doesn't fully implement re-enlightenment notification. Basically,
the support for reenlightenment MSRs is just a stub and userspace is only
expected to expose the feature when TSC scaling on the expected destination
hosts is available. With TSC scaling, no real re-enlightenment is needed
as TSC frequency doesn't change. With TSC scaling becoming ubiquitous, it
likely makes little sense to fully implement re-enlightenment in KVM.

Prevent TSC page from being updated after migration. In case it's not the
guest who's initiating the change and when TSC page is already enabled,
just keep it as it is: TSC value is supposed to be preserved across
migration and TSC frequency can't change with re-enlightenment enabled.
The guest is doomed anyway if any of this is not true.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210316143736.964151-5-vkuznets@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      0469f2f7
    • V
      KVM: x86: hyper-v: Track Hyper-V TSC page status · cc9cfddb
      由 Vitaly Kuznetsov 提交于 
      Create an infrastructure for tracking Hyper-V TSC page status, i.e. if it
was updated from guest/host side or if we've failed to set it up (because
e.g. guest wrote some garbage to HV_X64_MSR_REFERENCE_TSC) and there's no
need to retry.

Also, in a hypothetical situation when we are in 'always catchup' mode for
TSC we can now avoid contending 'hv->hv_lock' on every guest enter by
setting the state to HV_TSC_PAGE_BROKEN after compute_tsc_page_parameters()
returns false.

Check for HV_TSC_PAGE_SET state instead of '!hv->tsc_ref.tsc_sequence' in
get_time_ref_counter() to properly handle the situation when we failed to
write the updated TSC page values to the guest.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210316143736.964151-4-vkuznets@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      cc9cfddb
  15. 17 3月, 2021 1 次提交
    • V
      KVM: x86: hyper-v: Prevent using not-yet-updated TSC page by secondary CPUs · e880c6ea
      由 Vitaly Kuznetsov 提交于 
      When KVM_REQ_MASTERCLOCK_UPDATE request is issued (e.g. after migration)
we need to make sure no vCPU sees stale values in PV clock structures and
thus all vCPUs are kicked with KVM_REQ_CLOCK_UPDATE. Hyper-V TSC page
clocksource is global and kvm_guest_time_update() only updates in on vCPU0
but this is not entirely correct: nothing blocks some other vCPU from
entering the guest before we finish the update on CPU0 and it can read
stale values from the page.

Invalidate TSC page in kvm_gen_update_masterclock() to switch all vCPUs
to using MSR based clocksource (HV_X64_MSR_TIME_REF_COUNT).
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210316143736.964151-3-vkuznets@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      e880c6ea