- 16 5月, 2010 5 次提交
-
-
由 Wu Zhangjin 提交于
The interrupt enable bit for the performance counters is in the Control Register $24, not in the counter register. loongson2_perfcount_handler(), we need to use Reported-by: NXu Hengyang <hengyang@mail.ustc.edu.cn> Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1198/Signed-off-by: NRalf Baechle <ralf@linux-mips.org> ---
-
由 Chandrakala Chavva 提交于
The sys_ppoll() takes struct 'struct timespec'. This is different for the N32 and N64 ABIs. Use the compat version to do the proper conversions. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1210/Signed-off-by: NRalf Baechle <ralf@linux-mips.org> ---
-
由 Shane McDonald 提交于
In the FPU emulator code of the MIPS, the Cause bits of the FCSR register are not currently writeable by the ctc1 instruction. In odd corner cases, this can cause problems. For example, a case existed where a divide-by-zero exception was generated by the FPU, and the signal handler attempted to restore the FPU registers to their state before the exception occurred. In this particular setup, writing the old value to the FCSR register would cause another divide-by-zero exception to occur immediately. The solution is to change the ctc1 instruction emulator code to allow the Cause bits of the FCSR register to be writeable. This is the behaviour of the hardware that the code is emulating. This problem was found by Shane McDonald, but the credit for the fix goes to Kevin Kissell. In Kevin's words: I submit that the bug is indeed in that ctc_op: case of the emulator. The Cause bits (17:12) are supposed to be writable by that instruction, but the CTC1 emulation won't let them be updated by the instruction. I think that actually if you just completely removed lines 387-388 [...] things would work a good deal better. At least, it would be a more accurate emulation of the architecturally defined FPU. If I wanted to be really, really pedantic (which I sometimes do), I'd also protect the reserved bits that aren't necessarily writable. Signed-off-by: NShane McDonald <mcdonald.shane@gmail.com> To: anemo@mba.ocn.ne.jp To: kevink@paralogos.com To: sshtylyov@mvista.com Patchwork: http://patchwork.linux-mips.org/patch/1205/Signed-off-by: NRalf Baechle <ralf@linux-mips.org> ---
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: JFS: Free sbi memory in error path fs/sysv: dereferencing ERR_PTR() Fix double-free in logfs Fix the regression created by "set S_DEAD on unlink()..." commit
-
由 Linus Torvalds 提交于
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf record: Add a fallback to the reference relocation symbol
-
- 15 5月, 2010 15 次提交
-
-
由 Jan Blunck 提交于
I spotted the missing kfree() while removing the BKL. [akpm@linux-foundation.org: avoid multiple returns so it doesn't happen again] Signed-off-by: NJan Blunck <jblunck@suse.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Dan Carpenter 提交于
I moved the dir_put_page() inside the if condition so we don't dereference "page", if it's an ERR_PTR(). Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
iput() is needed *until* we'd done successful d_alloc_root() Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
1) i_flags simply doesn't work for mount/unlink race prevention; we may have many links to file and rm on one of those obviously shouldn't prevent bind on top of another later on. To fix it right way we need to mark _dentry_ as unsuitable for mounting upon; new flag (DCACHE_CANT_MOUNT) is protected by d_flags and i_mutex on the inode in question. Set it (with dont_mount(dentry)) in unlink/rmdir/etc., check (with cant_mount(dentry)) in places in namespace.c that used to check for S_DEAD. Setting S_DEAD is still needed in places where we used to set it (for directories getting killed), since we rely on it for readdir/rmdir race prevention. 2) rename()/mount() protection has another bogosity - we unhash the target before we'd checked that it's not a mountpoint. Fixed. 3) ancient bogosity in pivot_root() - we locked i_mutex on the right directory, but checked S_DEAD on the different (and wrong) one. Noticed and fixed. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6126/1: ARM mpcore_wdt: fix build failure and other fixes ARM: 6125/1: ARM TWD: move TWD registers to common header ARM: 6110/1: Fix Thumb-2 kernel builds when UACCESS_WITH_MEMCPY is enabled ARM: 6112/1: Use the Inner Shareable I-cache and BTB ops on ARMv7 SMP ARM: 6111/1: Implement read/write for ownership in the ARMv6 DMA cache ops ARM: 6106/1: Implement copy_to_user_page() for noMMU ARM: 6105/1: Fix the __arm_ioremap_caller() definition in nommu.c
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, mrst: Don't blindly access extended config space
-
由 Hugh Dickins 提交于
If the kernel is large or the profiling step small, /proc/profile leaks data and readprofile shows silly stats, until readprofile -r has reset the buffer: clear the prof_buffer when it is vmalloc()ed. Signed-off-by: NHugh Dickins <hughd@google.com> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
My old address will shut down in a couple of weeks: update the tree. Signed-off-by: NHugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: NHugh Dickins <hughd@google.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 H. Peter Anvin 提交于
Do not blindly access extended configuration space unless we actively know we're on a Moorestown platform. The fixed-size BAR capability lives in the extended configuration space, and thus is not applicable if the configuration space isn't appropriately sized. This fixes booting certain VMware configurations with CONFIG_MRST=y. Moorestown will add a fake PCI-X 266 capability to advertise the presence of extended configuration space. Reported-and-tested-by: NPetr Vandrovec <petr@vandrovec.name> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com> Acked-by: NJacob Pan <jacob.jun.pan@intel.com> Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org> LKML-Reference: <AANLkTiltKUa3TrKR1M51eGw8FLNoQJSLT0k0_K5X3-OJ@mail.gmail.com>
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, cacheinfo: Turn off L3 cache index disable feature in virtualized environments x86, k8: Fix build error when K8_NB is disabled x86, amd: Check X86_FEATURE_OSVW bit before accessing OSVW MSRs x86: Fix fake apicid to node mapping for numa emulation
-
由 Frank Arnold 提交于
When running a quest kernel on xen we get: BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 IP: [<ffffffff8142f2fb>] cpuid4_cache_lookup_regs+0x2ca/0x3df PGD 0 Oops: 0000 [#1] SMP last sysfs file: CPU 0 Modules linked in: Pid: 0, comm: swapper Tainted: G W 2.6.34-rc3 #1 /HVM domU RIP: 0010:[<ffffffff8142f2fb>] [<ffffffff8142f2fb>] cpuid4_cache_lookup_regs+0x 2ca/0x3df RSP: 0018:ffff880002203e08 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000060 RDX: 0000000000000000 RSI: 0000000000000040 RDI: 0000000000000000 RBP: ffff880002203ed8 R08: 00000000000017c0 R09: ffff880002203e38 R10: ffff8800023d5d40 R11: ffffffff81a01e28 R12: ffff880187e6f5c0 R13: ffff880002203e34 R14: ffff880002203e58 R15: ffff880002203e68 FS: 0000000000000000(0000) GS:ffff880002200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000038 CR3: 0000000001a3c000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 0, threadinfo ffffffff81a00000, task ffffffff81a44020) Stack: ffffffff810d7ecb ffff880002203e20 ffffffff81059140 ffff880002203e30 <0> ffffffff810d7ec9 0000000002203e40 000000000050d140 ffff880002203e70 <0> 0000000002008140 0000000000000086 ffff880040020140 ffffffff81068b8b Call Trace: <IRQ> [<ffffffff810d7ecb>] ? sync_supers_timer_fn+0x0/0x1c [<ffffffff81059140>] ? mod_timer+0x23/0x25 [<ffffffff810d7ec9>] ? arm_supers_timer+0x34/0x36 [<ffffffff81068b8b>] ? hrtimer_get_next_event+0xa7/0xc3 [<ffffffff81058e85>] ? get_next_timer_interrupt+0x19a/0x20d [<ffffffff8142fa23>] get_cpu_leaves+0x5c/0x232 [<ffffffff8106a7b1>] ? sched_clock_local+0x1c/0x82 [<ffffffff8106a9a0>] ? sched_clock_tick+0x75/0x7a [<ffffffff8107748c>] generic_smp_call_function_single_interrupt+0xae/0xd0 [<ffffffff8101f6ef>] smp_call_function_single_interrupt+0x18/0x27 [<ffffffff8100a773>] call_function_single_interrupt+0x13/0x20 <EOI> [<ffffffff8143c468>] ? notifier_call_chain+0x14/0x63 [<ffffffff810295c6>] ? native_safe_halt+0xc/0xd [<ffffffff810114eb>] ? default_idle+0x36/0x53 [<ffffffff81008c22>] cpu_idle+0xaa/0xe4 [<ffffffff81423a9a>] rest_init+0x7e/0x80 [<ffffffff81b10dd2>] start_kernel+0x40e/0x419 [<ffffffff81b102c8>] x86_64_start_reservations+0xb3/0xb7 [<ffffffff81b103c4>] x86_64_start_kernel+0xf8/0x107 Code: 14 d5 40 ff ae 81 8b 14 02 31 c0 3b 15 47 1c 8b 00 7d 0e 48 8b 05 36 1c 8b 00 48 63 d2 48 8b 04 d0 c7 85 5c ff ff ff 00 00 00 00 <8b> 70 38 48 8d 8d 5c ff ff ff 48 8b 78 10 ba c4 01 00 00 e8 eb RIP [<ffffffff8142f2fb>] cpuid4_cache_lookup_regs+0x2ca/0x3df RSP <ffff880002203e08> CR2: 0000000000000038 ---[ end trace a7919e7f17c0a726 ]--- The L3 cache index disable feature of AMD CPUs has to be disabled if the kernel is running as guest on top of a hypervisor because northbridge devices are not available to the guest. Currently, this fixes a boot crash on top of Xen. In the future this will become an issue on KVM as well. Check if northbridge devices are present and do not enable the feature if there are none. [ hpa: backported to 2.6.34 ] Signed-off-by: NFrank Arnold <frank.arnold@amd.com> LKML-Reference: <1271945222-5283-3-git-send-email-bp@amd64.org> Acked-by: NBorislav Petkov <borislav.petkov@amd.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: <stable@kernel.org>
-
由 Borislav Petkov 提交于
K8_NB depends on PCI and when the last is disabled (allnoconfig) we fail at the final linking stage due to missing exported num_k8_northbridges. Add a header stub for that. Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com> LKML-Reference: <20100503183036.GJ26107@aftab> Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: <stable@kernel.org>
-
git://git.infradead.org/users/eparis/notify由 Linus Torvalds 提交于
* 'for-linus' of git://git.infradead.org/users/eparis/notify: inotify: don't leak user struct on inotify release inotify: race use after free/double free in inotify inode marks inotify: clean up the inotify_add_watch out path Inotify: undefined reference to `anon_inode_getfd' Manual merge to remove duplicate "select ANON_INODES" from Kconfig file
-
由 Linus Torvalds 提交于
Merge branch 'davinci-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: DA830: fix USB 2.0 clock entry
-
由 Sergei Shtylyov 提交于
DA8xx OHCI driver fails to load due to failing clk_get() call for the USB 2.0 clock. Arrange matching USB 2.0 clock by the clock name instead of the device. (Adding another CLK() entry for "ohci.0" device won't do -- in the future I'll also have to enable USB 2.0 clock to configure CPPI 4.1 module, in which case I won't have any device at all.) Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
- 14 5月, 2010 17 次提交
-
-
由 Pavel Emelyanov 提交于
inotify_new_group() receives a get_uid-ed user_struct and saves the reference on group->inotify_data.user. The problem is that free_uid() is never called on it. Issue seem to be introduced by 63c882a0 (inotify: reimplement inotify using fsnotify) after 2.6.30. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Eric Paris <eparis@parisplace.org> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NEric Paris <eparis@redhat.com>
-
由 Eric Paris 提交于
There is a race in the inotify add/rm watch code. A task can find and remove a mark which doesn't have all of it's references. This can result in a use after free/double free situation. Task A Task B ------------ ----------- inotify_new_watch() allocate a mark (refcnt == 1) add it to the idr inotify_rm_watch() inotify_remove_from_idr() fsnotify_put_mark() refcnt hits 0, free take reference because we are on idr [at this point it is a use after free] [time goes on] refcnt may hit 0 again, double free The fix is to take the reference BEFORE the object can be found in the idr. Signed-off-by: NEric Paris <eparis@redhat.com> Cc: <stable@kernel.org>
-
由 Eric Paris 提交于
inotify_add_watch explictly frees the unused inode mark, but it can just use the generic code. Just do that. Signed-off-by: NEric Paris <eparis@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: vhost: fix barrier pairing
-
由 Linus Torvalds 提交于
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: mmap_min_addr check CAP_SYS_RAWIO only for write
-
git://git.monstr.eu/linux-2.6-microblaze由 Linus Torvalds 提交于
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Fix module loading on system with WB cache microblaze: export assembly functions used by modules microblaze: Remove powerpc code from Microblaze port microblaze: Remove compilation warnings in cache macro microblaze: export assembly functions used by modules microblaze: fix get_user/put_user side-effects microblaze: re-enable interrupts before calling schedule
-
由 Kees Cook 提交于
Redirecting directly to lsm, here's the patch discussed on lkml: http://lkml.org/lkml/2010/4/22/219 The mmap_min_addr value is useful information for an admin to see without being root ("is my system vulnerable to kernel NULL pointer attacks?") and its setting is trivially easy for an attacker to determine by calling mmap() in PAGE_SIZE increments starting at 0, so trying to keep it private has no value. Only require CAP_SYS_RAWIO if changing the value, not reading it. Comment from Serge : Me, I like to write my passwords with light blue pen on dark blue paper, pasted on my window - if you're going to get my password, you're gonna get a headache. Signed-off-by: NKees Cook <kees.cook@canonical.com> Acked-by: NSerge Hallyn <serue@us.ibm.com> Signed-off-by: NJames Morris <jmorris@namei.org> (cherry picked from commit 822cceec)
-
由 Michal Simek 提交于
There is necessary to flush whole dcache. Icache work should be done in kernel/module.c. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Andreas Herrmann 提交于
If host CPU is exposed to a guest the OSVW MSRs are not guaranteed to be present and a GP fault occurs. Thus checking the feature flag is essential. Cc: <stable@kernel.org> # .32.x .33.x Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com> LKML-Reference: <20100427101348.GC4489@alberich.amd.com> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Clean up after WM83xx AUXADC interrupt if it arrives late
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
* 'kvm-updates/2.6.34' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PPC: Keep index within boundaries in kvmppc_44x_emul_tlbwe() KVM: VMX: blocked-by-sti must not defer NMI injections KVM: x86: Call vcpu_load and vcpu_put in cpuid_update KVM: SVM: Fix wrong intercept masks on 32 bit KVM: convert ioapic lock to spinlock
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: serial: imx.c: fix CTS trigger level lower to avoid lost chars tty: Fix unbalanced BKL handling in error path serial: mpc52xx_uart: fix null pointer dereference
-
由 Valentin Longchamp 提交于
The imx CTS trigger level is left at its reset value that is 32 chars. Since the RX FIFO has 32 entries, when CTS is raised, the FIFO already is full. However, some serial port devices first empty their TX FIFO before stopping when CTS is raised, resulting in lost chars. This patch sets the trigger level lower so that other chars arrive after CTS is raised, there is still room for 16 of them. Signed-off-by: Valentin Longchamp<valentin.longchamp@epfl.ch> Tested-by: Philippe Rétornaz<philippe.retornaz@epfl.ch> Acked-by: Wolfram Sang<w.sang@pengutronix.de> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Cox 提交于
Arnd noted: After the "retry_open:" label, we first get the tty_mutex and then the BKL. However a the end of tty_open, we jump back to retry_open with the BKL still held. If we run into this case, the tty_open function will be left with the BKL still held. Signed-off-by: NAlan Cox <alan@linux.intel.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Anatolij Gustschin 提交于
Commit 6acc6833 introduced NULL pointer dereference and kernel crash on ppc32 machines while booting. Fix this bug now. Reported-by: NLeonardo Chiquitto <leonardo.lists@gmail.com> Tested-by: NLeonardo Chiquitto <leonardo.lists@gmail.com> Signed-off-by: NAnatolij Gustschin <agust@denx.de> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: guard against hardlinking directories
-
- 13 5月, 2010 3 次提交
-
-
由 Jan Kara 提交于
According to specification mkdir d; ln -s d a; open("a/", O_NOFOLLOW | O_RDONLY) should return success but currently it returns ELOOP. This is a regression caused by path lookup cleanup patch series. Fix the code to ignore O_NOFOLLOW in case the provided path has trailing slashes. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Reported-by: NMarius Tolzmann <tolzmann@molgen.mpg.de> Acked-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: ice1724 - Fix ESI Maya44 capture source control ALSA: pcm - Use pgprot_noncached() for MIPS non-coherent archs ALSA: virtuoso: fix Xonar D1/DX front panel microphone ALSA: hda - Add hp-dv4 model for IDT 92HD71bx ALSA: hda - Fix mute-LED GPIO pin for HP dv series ALSA: hda: Fix 0 dB for Lenovo models using Conexant CX20549 (Venice)
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ad7877 - keep dma rx buffers in seperate cache lines Input: psmouse - reset all types of mice before reconnecting Input: elantech - use all 3 bytes when checking version Input: iforce - fix Guillemot Jet Leader 3D entry Input: iforce - add Guillemot Jet Leader Force Feedback
-