Add functions for initializing, reading and writing to the SPI
device for the Sony CXD2880 DVB-T2/T tuner + demodulator.
Signed-off-by: NYasunari Takiguchi <Yasunari.Takiguchi@sony.com>
Signed-off-by: NMasayuki Yamamoto <Masayuki.Yamamoto@sony.com>
Signed-off-by: NHideki Nozawa <Hideki.Nozawa@sony.com>
Signed-off-by: NKota Yonezawa <Kota.Yonezawa@sony.com>
Signed-off-by: NToshihiko Matsumoto <Toshihiko.Matsumoto@sony.com>
Signed-off-by: NSatoshi Watanabe <Satoshi.C.Watanabe@sony.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

These are common files for the driver for the
Sony CXD2880 DVB-T2/T tuner + demodulator.
These contains helper functions for the driver.
Signed-off-by: NYasunari Takiguchi <Yasunari.Takiguchi@sony.com>
Signed-off-by: NMasayuki Yamamoto <Masayuki.Yamamoto@sony.com>
Signed-off-by: NHideki Nozawa <Hideki.Nozawa@sony.com>
Signed-off-by: NKota Yonezawa <Kota.Yonezawa@sony.com>
Signed-off-by: NToshihiko Matsumoto <Toshihiko.Matsumoto@sony.com>
Signed-off-by: NSatoshi Watanabe <Satoshi.C.Watanabe@sony.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This is the SPI adapter part of the driver for the
Sony CXD2880 DVB-T2/T tuner + demodulator.
Signed-off-by: NYasunari Takiguchi <Yasunari.Takiguchi@sony.com>
Signed-off-by: NMasayuki Yamamoto <Masayuki.Yamamoto@sony.com>
Signed-off-by: NHideki Nozawa <Hideki.Nozawa@sony.com>
Signed-off-by: NKota Yonezawa <Kota.Yonezawa@sony.com>
Signed-off-by: NToshihiko Matsumoto <Toshihiko.Matsumoto@sony.com>
Signed-off-by: NSatoshi Watanabe <Satoshi.C.Watanabe@sony.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This is the document file for Sony CXD2880 DVB-T2/T tuner + demodulator.
It contains the description of the SPI adapter binding.
Signed-off-by: NYasunari Takiguchi <Yasunari.Takiguchi@sony.com>
Signed-off-by: NMasayuki Yamamoto <Masayuki.Yamamoto@sony.com>
Signed-off-by: NHideki Nozawa <Hideki.Nozawa@sony.com>
Signed-off-by: NKota Yonezawa <Kota.Yonezawa@sony.com>
Signed-off-by: NToshihiko Matsumoto <Toshihiko.Matsumoto@sony.com>
Signed-off-by: NSatoshi Watanabe <Satoshi.C.Watanabe@sony.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Not sure why, but, on ia64, with Linaro's gcc 7.3 compiler,
using #ifdef (CONFIG_I2C) is not OK.

So, replace it by IS_ENABLED(CONFIG_I2C), in order to fix the
builds there.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Hauppauge produced a revision of ImpactVCBe using an 888,
with a 25MHz crystal, instead of using the default third
overtone 50Mhz crystal. This overrides that frequency so
that the cx25840 is properly configured. Without the proper
crystal setup the cx25840 cannot load the firmware or
decode video.
Signed-off-by: NBrad Love <brad@nextdimension.cc>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Currently clk_freq is ignored entirely, because the cx235840 driver
configures the xtal at the chip defaults. This is an issue if a
board is produced with a non-default frequency crystal. If clk_freq
is not zero the cx25840 will attempt to use the setting provided,
or fall back to defaults otherwise.
Signed-off-by: NBrad Love <brad@nextdimension.cc>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Proper cx2388x chip type is detected in cx25840 probe, the clock
rate is untouched however in probe. The cx25840 only checks for
non default clock values for 888 and provides custom settings for
25MHz 888. This change ensures that cx23888 chips with default 50MHz
crystals will not get configured as if they have 25MHz crystals. A
cx23887 board will continue to be configured for 25MHz crystal as
there is no custom clock support included for it.
Signed-off-by: NBrad Love <brad@nextdimension.cc>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The cx25840 driver currently configures 885, 887, and 888 using
default divisors for each chip. This check to see if the cx23885
driver has passed the cx25840 a non-default clock rate for a
specific chip. If a cx23885 board has left clk_freq at 0, the
clock default values will be used to configure the PLLs.

This patch only has effect on 888 boards who set clk_freq to 25M.
Signed-off-by: NBrad Love <brad@nextdimension.cc>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The GPIO settings for quadHD boards are wrong. Fix them.
Signed-off-by: NBrad Love <brad@nextdimension.cc>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Hauppauge HVR-975 is a hybrid, dual frontend, single tuner USB device.
It contains lgdt3306a and si2168 frontends and one si2157 tuner. The
lgdt3306a frontend is currently enabled. This creates the second
demodulator and attaches it to the tuner.

Enables lgdt3306a|si2168 + si2157
Signed-off-by: NBrad Love <brad@nextdimension.cc>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Nit regarding hard coded value.
Signed-off-by: NBrad Love <brad@nextdimension.cc>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

If frontend[1] exists, then enable the dvb adapter mfe lock system.
Signed-off-by: NBrad Love <brad@nextdimension.cc>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Add missing composite and s-video inputs.
Signed-off-by: NBrad Love <brad@nextdimension.cc>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Utilize the i2c mux adapter returned by the frontend.
Signed-off-by: NBrad Love <brad@nextdimension.cc>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Coding style fix.
Signed-off-by: NBrad Love <brad@nextdimension.cc>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This symbol mismatch is handled by NULL'ing out the release
callback if the driver is loaded as an i2c device.

This patch reverts:
- commit 94448e21 ("media: lgdt3306a: Fix a double kfree on i2c
  device remove")
- commit 835d6617 ("media: lgdt3306a: Fix module count mismatch
  on usb unplug")

The symbol count mismatch is handled by:
- commit 5b3a8e90 ("media: lgdt3306a: Set fe ops.release to
  NULL if probed")
Signed-off-by: NBrad Love <brad@nextdimension.cc>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

A possible hardware bug was discovered when using CA addon hardware
attached to the ngene hardware, in that the TS input buffer much likely
will shift and thus become unaligned to 188 byte blocks (a full TS frame)
when things like CA module initialisation (which happens via differing
communication paths) take place. This causes the TS NULL removal in
tsin_exchange() to fail to detect this previously inserted data and thus
causes userspace applications to receive data they didn't sent beforehand
and ultimately cause troubles.

On driver load with an inserted CAM, buffers are fine at first (note that
the driver has to keep the communication running from/to the card by
inserting TS NULL frames, this is done in tsout_exchange() via
FillTSBuffer() - that data is simply sent back by the hardware):

  offset | 0    1   2   3   4   5 .... 188 189 190 191 192 193 .... 376
  data   | 47  1f  ff  10  6f  6f ....  47  1f  ff  10  6f  6f ....  47

After a few seconds, the CA module is recognised and initialised, which is
signalled by

  dvb_ca_en50221: dvb_ca adapter X: DVB CAM detected and initialised successfully

This is where the first shift happens (this is always four bytes), buffer
becomes like this:

  offset | 0    1   2   3   4   5 .... 188 189 190 191 192 193 .... 376
  data   | 6f  6f  6f  6f  47  1f ....  6f  6f  6f  6f  47  1f ....  6f

Next, VDR, TVHeadend or any other CI aware application is started, buffers
will shift by even more bytes. It is believed this is due to the hardware
not handling control and data bytes properly distinct, and control data
having an influence on the actual data stream, which we cannot properly
detect at the driver level.

Workaround this hardware quirk by adding a detection for the TS sync byte
0x47 before each TS frame copy, scan for a new SYNC byte and a TS NULL
packet if buffers become unaligned, take note of that offset and apply
that when copying data to the DVB ring buffers. The last <188 bytes from
the hardware buffers are stored in a temp buffer (tsin_buffer), for which
the remainder will be in the beginning of the next hardware buffer (next
iteration of tsin_exchange()). That remainder will be appended to the
temp buffer and finally sent to the DVB ring buffer. The resulting TS
stream is perfectly fine, and the TS NULL packets inserted by the driver
which are sent back are properly removed. The resulting offset is being
clamped to 188 byte segments (one TS packet). Though this can result in
a repeated TS packet if the overall offset grows beyond this (and it
will grow only on CA initialisation), this is still way better than
unaligned TS frames and data sent to userspace that just isn't supposed
to be there.

This compensation can be toggled by the ci_tsfix modparam, which defaults
to 1 (enabled). In the case of problems, this can be turned off by setting
the parameter to 0 to restore the old behaviour.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Move the copy logic that will skip previously inserted TS NULL frames when
moving data to the DVB ring buffers into an own function. This is done to
not duplicate code all over the place with the following TS offset shift
fixup patch.

While we're touching this part of the code, get rid of the DEBUG_CI_XFER
debug-ifdeffery. This could be toggleable either by a Kconfig or a module
param, but in the end this will accidentally be enabled and cause lots
of kernel log messages, and such devel debug shouldn't be there anyway.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Replace "dont" with "don't".
"Dont" is not same as "Do not" or "Don't".
Signed-off-by: NArushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This patch replace "be be" with "be".
Signed-off-by: NArushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Remove unnecessary semicolon found using semicolon.cocci Coccinelle
script.
Signed-off-by: NArushi Singhal <arushisinghal19971997@gmail.com>
Acked-by: NJulia Lawall <julia.lawall@lip6.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

On some architectures such as arm64, siano chip based TV-tuner
USB devices are not recognized correctly due to coherent memory
allocation failure with the following error:

[  663.556135] usbcore: deregistering interface driver smsusb
[  683.624809] smsusb:smsusb_probe: board id=18, interface number 0
[  683.633530] smsusb:smsusb_init_device: smscore_register_device(...) failed, rc -12
[  683.641501] smsusb:smsusb_probe: Device initialized with return code -12
[  683.652978] smsusb: probe of 1-1:1.0 failed with error -12

This is caused by dma_alloc_coherent(NULL, ...) returning NULL in
smscoreapi.c.

To fix this error, allocate the buffer memory for the USB devices
via kmalloc() and let the USB core do the DMA mapping and free.
Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Links like :ref:`VIDIOC_STREAMON` expand to "ioctl VIDIOC_STREAMON,
VIDIOC_STREAMOFF". Thus our reader will think we are talking about
STREAMON _and_ STREAMOFF, but only one of the two actually applies
in some cases.

Fix by adding a link title, so the reader will read only the correct
ioctl name.
Signed-off-by: NLuca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The ">" should be ">=" so that we don't read one element beyond the end
of the array.

Fixes: 8a77009b ("media: ov5695: add support for OV5695 sensor")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Update the register 0x3503 to use 'no delay latch' for gain.
This makes sensor to output the first frame as normal rather
than a very dark one.
Signed-off-by: NShunqian Zheng <zhengsq@rock-chips.com>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The PM runtime operations are unused when CONFIG_PM is disabled,
leading to a harmless warning:

drivers/media/platform/renesas-ceu.c:1003:12: error: 'ceu_runtime_suspend' defined but not used [-Werror=unused-function]
 static int ceu_runtime_suspend(struct device *dev)
            ^~~~~~~~~~~~~~~~~~~
drivers/media/platform/renesas-ceu.c:987:12: error: 'ceu_runtime_resume' defined but not used [-Werror=unused-function]
 static int ceu_runtime_resume(struct device *dev)
            ^~~~~~~~~~~~~~~~~~

This adds a __maybe_unused annotation to shut up the warning.

Fixes: 32e5a70d ("media: platform: Add Renesas CEU driver")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The CSTRST_CPON mask was wrongly assigned to BIT(1) instead of BIT(0).
Fix that by changing the mask opportunely.
Reported-by: NDylan Laduranty <dylan.laduranty@mesotic.com>
Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The cxd2099 driver is now maintained and being taken care of by

  * Jasmin Jessich <jasmin@anw.at>
Signed-off-by: NJasmin Jessich <jasmin@anw.at>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

As all drivers using the cxd2099 are converted to handle attach/detach
the generic I2C client way, the static inline cxd2099_attach isn't
required anymore. Thus cleanup cxd2099.h from the remainders, the adr
struct member also isn't used anymore.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Signed-off-by: NJasmin Jessich <jasmin@anw.at>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Report I2C_FUNC_I2C in .functionality() as well. The I2C interface can
handle this fine and even is required for all I2C client drivers that
utilise the regmap API which are used from within the ngene driver.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Signed-off-by: NJasmin Jessich <jasmin@anw.at>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Change the way the cxd2099 hardware is being attached to the new I2C
client interface way.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Signed-off-by: NJasmin Jessich <jasmin@anw.at>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

As the media subdevice is registered with 'v4l2_async_register_subdev()'
unregister it at module removal time with
'v4l2_async_unregister_subdev()'
Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

msleep() can sleep up to 20ms.

As suggested by Documentation/timers/timers_howto.txt replace it with
usleep_range() with up to 5ms delay.
Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Add an empty line before return at the end of functions.
Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

A lot of comments that would fit a single line were spread on two or
more lines. Also fix capitalization and punctuation where appropriate.
Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Align all function parameters to first open brace when declaring
functions.
Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

msleep() can sleep up to 20ms.

As suggested by Documentation/timers/timers_howto.txt replace it with
usleep_range() with up to 5ms delay.
Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Sort include directives alphabetically to ease maintenance.
Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Two minor style fixes, align function parameter and remove un-necessary
spaces.
Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>