This patch replaces the usage of dma_alloc_coherent() with the managed
version, dmam_alloc_coherent(), hereby reducing replicated code.
Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by; John Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Update Broadcom copyright markings in all modified files.
Signed-off-by: NKetan Mukadam <ketan.mukadam@broadcom.com>
Reviewed-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

FW needs NULL terminated driver version string.
Signed-off-by: NKetan Mukadam <ketan.mukadam@broadcom.com>
Reviewed-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com>
Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: NShivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Firmware provides drive specific target reset and task abort timeout
values. Driver needs to use these timeout values during task management
calls. If FW does not provide these values, fall back to using earlier
default timeout of 50 seconds for TM.

[mkp: clarified comment]
Signed-off-by: NSumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: NShivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

While driver is waiting for adapter to become operational, if a kill
adapter is issued, driver can bail out from the wait loop immediately
rather than waiting for the entire 180 seconds.
Signed-off-by: NShivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

There is a possibility that firmware on the controller was upgraded before
system was suspended. During resume, driver needs to read updated
controller properties.
Signed-off-by: NShivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

If MR_DCMD_CTRL_GET_INFO DCMD timed out, return failure rather than doing
kill adapter.
Signed-off-by: NShivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Updated driver version to "26.100.00.00"
Signed-off-by: NChaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: As per MPI-spec, use combined reply queue for SAS3.5 controllers when HBA supports more than 16 MSI-x vectors.

Presently driver is using combined reply queue feature when MSI-x vectors >
8 for both SAS3 and SAS3.5 controllers.  But as per MPI-spec,

1. For SAS3 controllers, driver should use combined reply queue when HBA
supports more than 8 MSI-x vectors.

2. For SAS3.5 controllers, driver should use combined reply queue when HBA
supports more than 16 MSI-x vectors.

Modified driver code to use combined reply queue for SAS3 controllers when
HBA supports > 8 MSI-x vectors and for SAS3.5 controllers when HBA supports
> 16 MSI-x vectors.
Signed-off-by: NChaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Fix, False timeout prints for ioctl and other internal commands during controller reset.

When an ioctl is sent to FW, and if there is a controller reset issued
before ioctl gets completed, then in controller reset path all the pending
ioctl commands are terminated from "mpt3sas_ctl_reset_handler" function.
This will wake up the waiting ioctl commands in ioctl path and print
timeouts which are actually not timeouts.

Introduced "mpt3sas_base_check_cmd_timeout" function to check and print
whether command got timed out (or) terminated due to Host reset.
Signed-off-by: NChaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

While configuring of NVMe device handling, _pcie_device structure member
was accessed after its reference count is decremented/put. Hence modified
code to access member of _pcie_device structure before its reference count
is decremented/put.
Signed-off-by: NChaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In _scsih_scan_finished driver should mark port_enable_cmd.status as
'command not used', instead base_cmds.status was marked as 'command not
used'. Update code to mark port_enable_cmd.status as 'command not used'.
Signed-off-by: NChaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Don't abort I/Os issued to NVMe drives while processing Async Broadcast primitive event.

Linux driver when receives Broadcast Asynchronous Event Notification (BAEN)
from the controller firmware, checks all pending I/Os at the driver level
and issues query task, abort task TMs. This is done in the driver to handle
drives which are connected with multiple initiators and undergoing target
resets. In the BAEN handling code, the I/Os issued to NVMe drives are also
handled and query task and abort task TMs are issued, which are not
necessary as there is no multi-initiator and no BAEN concept with NVMe
drives. Hence when the driver checks for pending I/Os it skips NVMe drives
at this moment.
Signed-off-by: NChaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Since the TCMU_RING_SIZE macro is not using here will discard it and at the
same time clean up the code style.
Signed-off-by: NXiubo Li <xiubli@redhat.com>
Acked-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

As files move around, their previous links break. Fix the
references for them.
Acked-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: NJonathan Corbet <corbet@lwn.net>

As we move stuff around, some doc references are broken. Fix some of
them via this script:
	./scripts/documentation-file-ref-check --fix

Manually checked that produced results are valid.
Acked-by: NMatthias Brugger <matthias.bgg@gmail.com>
Acked-by: NTakashi Iwai <tiwai@suse.de>
Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: NGuenter Roeck <linux@roeck-us.net>
Acked-by: NMiguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: NJonathan Corbet <corbet@lwn.net>

There's a missing ".rst" at the doc's file name.
Acked-by: NRamesh Shanmugasundaram <Ramesh.shanmugasundaram@bp.renesas.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: NJonathan Corbet <corbet@lwn.net>

There are several places pointing to old documentation files:

  Documentation/video4linux/API.html
  Documentation/video4linux/bttv/
  Documentation/video4linux/cx2341x/fw-encoder-api.txt
  Documentation/video4linux/m5602.txt
  Documentation/video4linux/v4l2-framework.txt
  Documentation/video4linux/videobuf
  Documentation/video4linux/Zoran

Make them point to the new location where available, removing
otherwise.
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: NJonathan Corbet <corbet@lwn.net>

This file got renamed, but the references still point to the
old place.
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: NJonathan Corbet <corbet@lwn.net>

This script was moved out of Documentation/dvb, but the
links weren't updated.
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: NJonathan Corbet <corbet@lwn.net>

As we move stuff around, some doc references are broken. Fix some of
them via this script:
	./scripts/documentation-file-ref-check --fix

Manually checked if the produced result is valid, removing a few
false-positives.
Acked-by: NTakashi Iwai <tiwai@suse.de>
Acked-by: NMasami Hiramatsu <mhiramat@kernel.org>
Acked-by: NStephen Boyd <sboyd@kernel.org>
Acked-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: NColy Li <colyli@suse.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: NJonathan Corbet <corbet@lwn.net>

The script:
	./scripts/documentation-file-ref-check --fix

Gives multiple hints for broken references on some files.
Manually use the one that applies for some files.
Acked-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: NJames Morris <james.morris@microsoft.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: NJonathan Corbet <corbet@lwn.net>

Currently we were running HWIF quirks before getting HW capabilities.
This is not right because some HWIF callbacks depend on HW caps.

Lets save the quirks callback and use it in a later stage.

This fixes Altera socfpga.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Fixes: 5f0456b4 ("net: stmmac: Implement logic to automatically select HW Interface")
Reported-by: NDinh Nguyen <dinh.linux@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Vitor Soares <soares@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When sysfs_create_group fails, the lack of error-handling code may
cause unexpected results.

This patch adds error-handling code after calling sysfs_create_group.
Signed-off-by: NZhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Switchdev notifications for addition of SWITCHDEV_OBJ_ID_PORT_VLAN are
distributed not only on clean addition, but also when flags on an
existing VLAN are changed. mlxsw_sp_bridge_port_vlan_add() calls
mlxsw_sp_port_vlan_get() to get at the port_vlan in question, which
implicitly references the object. This then leads to discrepancies in
reference counting when the VLAN is removed. spectrum.c warns about the
problem when the module is removed:

[13578.493090] WARNING: CPU: 0 PID: 2454 at drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2973 mlxsw_sp_port_remove+0xfd/0x110 [mlxsw_spectrum]
[...]
[13578.627106] Call Trace:
[13578.629617]  mlxsw_sp_fini+0x2a/0xe0 [mlxsw_spectrum]
[13578.634748]  mlxsw_core_bus_device_unregister+0x3e/0x130 [mlxsw_core]
[13578.641290]  mlxsw_pci_remove+0x13/0x40 [mlxsw_pci]
[13578.646238]  pci_device_remove+0x31/0xb0
[13578.650244]  device_release_driver_internal+0x14f/0x220
[13578.655562]  driver_detach+0x32/0x70
[13578.659183]  bus_remove_driver+0x47/0xa0
[13578.663134]  pci_unregister_driver+0x1e/0x80
[13578.667486]  mlxsw_sp_module_exit+0xc/0x3fa [mlxsw_spectrum]
[13578.673207]  __x64_sys_delete_module+0x13b/0x1e0
[13578.677888]  ? exit_to_usermode_loop+0x78/0x80
[13578.682374]  do_syscall_64+0x39/0xe0
[13578.685976]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix by putting the port_vlan when mlxsw_sp_port_vlan_bridge_join()
determines it's a flag-only change.

Fixes: b3529af6 ("spectrum: Reference count VLAN entries")
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit f34436a4 ("net/ipv6: Simplify route replace and appending
into multipath route") changed the IPv6 route replace logic so that the
first matching route (i.e., same metric) is replaced.

Have mlxsw replace the first matching route as well.

Fixes: f34436a4 ("net/ipv6: Simplify route replace and appending into multipath route")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit f34436a4 ("net/ipv6: Simplify route replace and appending
into multipath route") changed the IPv6 route append logic so that
dev-only routes can be appended and not only gatewayed routes.

Align mlxsw with the new behaviour.

Fixes: f34436a4 ("net/ipv6: Simplify route replace and appending into multipath route")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

stmmac reception handler calls stmmac_rx_vlan() to strip the vlan before
calling napi_gro_receive().

The function assumes VLAN tagged frames are always tagged with
802.1Q protocol, and assigns ETH_P_8021Q to the skb by hard-coding
the parameter on call to __vlan_hwaccel_put_tag() .

This causes packets not to be passed to the VLAN slave if it was created
with 802.1AD protocol
(ip link add link eth0 eth0.100 type vlan proto 802.1ad id 100).

This fix passes the protocol from the VLAN header into
__vlan_hwaccel_put_tag() instead of using the hard-coded value of
ETH_P_8021Q.

NETIF_F_HW_VLAN_STAG_RX check was added and the strip action is now
dependent on the correct combination of features and the detected vlan tag.

NETIF_F_HW_VLAN_STAG_RX feature was added to be in line with the driver
actual abilities.
Signed-off-by: NElad Nachman <eladn@gilat.com>
Reviewed-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We didn't free the workqueue on any errors, nor did we
correctly check for rhashtable allocation errors, nor
did we free the hashtable on error.
Reported-by: NColin King <colin.king@canonical.com>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>

 - make sure we only allow internally generates commands in any non-live
   state
 - only allow connect commands on non-live queues when actually in the
   new or connecting states
 - treat all other non-live, non-dead states the same as a default
   cach-all

This fixes a regression where we could not shutdown a controller
orderly as we didn't allow the internal generated Property Set
command, and also ensures we don't accidentally let a Connect command
through in the wrong state.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJames Smart <james.smart@broadcom.com>

In the ADMIN_ONLY state we don't have any I/O queues, but we should accept
all admin commands without further checks.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: N James Smart <james.smart@broadcom.com>

Move the is_connected check to the fibre channel transport, as it has no
meaning for other transports.  To facilitate this split out a new
nvmf_fail_nonready_command helper that is called by the transport when
it is asked to handle a command on a queue that is not ready.

Also avoid a function call for the queue live fast path by inlining
the check.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJames Smart <james.smart@broadcom.com>

These fields in struct ndis_ipsecv2_offload and struct ndis_rsc_offload
are one byte according to the specs. This patch defines them with the
right size. These structs are not in use right now, but will be used soon.
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Errors are already reported in xemaclite_mdio_setup so avoid
reporting it again.
Signed-off-by: NRadhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove unused 'has_mdio' flag.
Signed-off-by: NRadhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since 'has_mdio' flag is not used,sequence insmod->rmmod-> insmod
leads to failure as MDIO unregister doesn't happen in .remove().
Fix it by checking MII bus pointer instead.
Signed-off-by: NRadhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To ensure MDIO bus is not double freed in remove() path
assign lp->mii_bus after MDIO bus registration.
Signed-off-by: NRadhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add missing of_node_put() call for device node returned by
of_parse_phandle().
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Acked-by: NTimur Tabi <timur@codeaurora.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With PHYS_ADDR_MAX there is now a type safe variant for all bits set.
Make use of it.

Patch created using a semantic patch as follows:

// <smpl>
@@
typedef phys_addr_t;
@@
-(phys_addr_t)ULLONG_MAX
+PHYS_ADDR_MAX
// </smpl>

Link: http://lkml.kernel.org/r/20180419214204.19322-1-stefan@agner.chSigned-off-by: NStefan Agner <stefan@agner.ch>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>	[arm64]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>