Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 18 6月, 2006 5 次提交
    • J
      [SECMARK]: Add new packet controls to SELinux · 4e5ab4cb
      由 James Morris 提交于 
      Add new per-packet access controls to SELinux, replacing the old
packet controls.

Packets are labeled with the iptables SECMARK and CONNSECMARK targets,
then security policy for the packets is enforced with these controls.

To allow for a smooth transition to the new controls, the old code is
still present, but not active by default.  To restore previous
behavior, the old controls may be activated at runtime by writing a
'1' to /selinux/compat_net, and also via the kernel boot parameter
selinux_compat_net.  Switching between the network control models
requires the security load_policy permission.  The old controls will
probably eventually be removed and any continued use is discouraged.

With this patch, the new secmark controls for SElinux are disabled by
default, so existing behavior is entirely preserved, and the user is
not affected at all.

It also provides a config option to enable the secmark controls by
default (which can always be overridden at boot and runtime).  It is
also noted in the kconfig help that the user will need updated
userspace if enabling secmark controls for SELinux and that they'll
probably need the SECMARK and CONNMARK targets, and conntrack protocol
helpers, although such decisions are beyond the scope of kernel
configuration.
Signed-off-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4e5ab4cb
    • J
      [SECMARK]: Add SELinux exports · c749b29f
      由 James Morris 提交于 
      Add and export new functions to the in-kernel SELinux API in support of the
new secmark-based packet controls.
Signed-off-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c749b29f
    • J
      [SECMARK]: Add new flask definitions to SELinux · 29a395ea
      由 James Morris 提交于 
      Secmark implements a new scheme for adding security markings to
packets via iptables, as well as changes to SELinux to use these
markings for security policy enforcement.  The rationale for this
scheme is explained and discussed in detail in the original threads:

 http://thread.gmane.org/gmane.linux.network/34927/
 http://thread.gmane.org/gmane.linux.network/35244/

Examples of policy and rulesets, as well as a full archive of patches
for iptables and SELinux userland, may be found at:

http://people.redhat.com/jmorris/selinux/secmark/

The code has been tested with various compilation options and in
several scenarios, including with 'complicated' protocols such as FTP
and also with the new generic conntrack code with IPv6 connection
tracking.

This patch:

Add support for a new object class ('packet'), and associated
permissions ('send', 'recv', 'relabelto').  These are used to enforce
security policy for network packets labeled with SECMARK, and for
adding labeling rules.
Signed-off-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      29a395ea
    • C
      [SELINUX]: add security class for appletalk sockets · 3e3ff15e
      由 Christopher J. PeBenito 提交于 
      Add a security class for appletalk sockets so that they can be
distinguished in SELinux policy.  Please apply.
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Acked-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3e3ff15e
    • C
      [LSM-IPsec]: SELinux Authorize · c8c05a8e
      由 Catherine Zhang 提交于 
      This patch contains a fix for the previous patch that adds security
contexts to IPsec policies and security associations.  In the previous
patch, no authorization (besides the check for write permissions to
SAD and SPD) is required to delete IPsec policies and security
assocations with security contexts.  Thus a user authorized to change
SAD and SPD can bypass the IPsec policy authorization by simply
deleteing policies with security contexts.  To fix this security hole,
an additional authorization check is added for removing security
policies and security associations with security contexts.

Note that if no security context is supplied on add or present on
policy to be deleted, the SELinux module allows the change
unconditionally.  The hook is called on deletion when no context is
present, which we may want to change.  At present, I left it up to the
module.

LSM changes:

The patch adds two new LSM hooks: xfrm_policy_delete and
xfrm_state_delete.  The new hooks are necessary to authorize deletion
of IPsec policies that have security contexts.  The existing hooks
xfrm_policy_free and xfrm_state_free lack the context to do the
authorization, so I decided to split authorization of deletion and
memory management of security data, as is typical in the LSM
interface.

Use:

The new delete hooks are checked when xfrm_policy or xfrm_state are
deleted by either the xfrm_user interface (xfrm_get_policy,
xfrm_del_sa) or the pfkey interface (pfkey_spddelete, pfkey_delete).

SELinux changes:

The new policy_delete and state_delete functions are added.
Signed-off-by: NCatherine Zhang <cxzhang@watson.ibm.com>
Signed-off-by: NTrent Jaeger <tjaeger@cse.psu.edu>
Acked-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c8c05a8e
  3. 06 6月, 2006 1 次提交
  5. 22 5月, 2006 1 次提交
  7. 16 5月, 2006 1 次提交
  9. 04 5月, 2006 1 次提交
  11. 01 5月, 2006 4 次提交
  13. 20 4月, 2006 1 次提交
  15. 11 4月, 2006 2 次提交
    • D
      [PATCH] Keys: Improve usage of memory barriers and remove IRQ disablement · 1a26feb9
      由 David Howells 提交于 
      Remove an unnecessary memory barrier (implicit in rcu_dereference()) from
install_session_keyring().

install_session_keyring() is also rearranged a little to make it slightly
more efficient.

As install_*_keyring() may schedule (in synchronize_rcu() or
keyring_alloc()), they may not be entered with interrupts disabled - and so
there's no point saving the interrupt disablement state over the critical
section.

exec_keys() will also be invoked with interrupts enabled, and so that doesn't
need to save the interrupt state either.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      1a26feb9
    • D
      [Security] Keys: Fix oops when adding key to non-keyring · c3a9d654
      由 David Howells 提交于 
      This fixes the problem of an oops occuring when a user attempts to add a
key to a non-keyring key [CVE-2006-1522].

The problem is that __keyring_search_one() doesn't check that the
keyring it's been given is actually a keyring.

I've fixed this problem by:

 (1) declaring that caller of __keyring_search_one() must guarantee that
     the keyring is a keyring; and

 (2) making key_create_or_update() check that the keyring is a keyring,
     and return -ENOTDIR if it isn't.

This can be tested by:

	keyctl add user b b `keyctl add user a a @s`
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      c3a9d654
  17. 10 4月, 2006 1 次提交
  19. 26 3月, 2006 4 次提交
  21. 24 3月, 2006 1 次提交
  23. 23 3月, 2006 1 次提交
    • D
      [PATCH] Bug fixes and cleanup for the BSD Secure Levels LSM · 6bb08da4
      由 Davi Arnaut 提交于 
      This patch address several issues in the current BSD Secure Levels code:

o plaintext_to_sha1: Missing check for a NULL return from __get_free_page

o passwd_write_file: A page is leaked if the password is wrong.

o fix securityfs registration order

o seclvl_init is a mess and can't properly tolerate failures, failure
  path is upside down (deldif and delf should be switched)

Cleanups:

o plaintext_to_sha1: Use buffers passed in
o passwd_write_file: Use kmalloc() instead of get_zeroed_page()
o passwd_write_file: hashedPassword comparison is just memcmp
o s/ENOSYS/EINVAL/
o misc

(akpm: after some discussion it appears that the BSD secure levels feature
should be scheduled for removal.  But for now, let's fix these problems up).
Signed-off-by: NDavi Arnaut <davi.arnaut@gmail.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Stephen Smalley <sds@epoch.ncsc.mil>
Cc: James Morris <jmorris@namei.org>
Cc: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      6bb08da4
  25. 22 3月, 2006 11 次提交
  27. 21 3月, 2006 6 次提交
    • C
      [SELINUX]: selinux_socket_getpeer_{stream,dgram} fixup · e6f50719
      由 Catherine Zhang 提交于 
      Signed-off-by: NCatherine Zhang <cxzhang@watson.ibm.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
      e6f50719
    • A
      [SECURITY] getpeersec: Fix build breakage · c841aa03
      由 Arnaldo Carvalho de Melo 提交于 
      A recent changeset removes dummy_socket_getpeersec, replacing it with
two new functions, but still references the removed function in the
security_fixup_ops table, fix it by doing the replacement operation in
the fixup table too.
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c841aa03
    • C
      [SECURITY]: TCP/UDP getpeersec · 2c7946a7
      由 Catherine Zhang 提交于 
      This patch implements an application of the LSM-IPSec networking
controls whereby an application can determine the label of the
security association its TCP or UDP sockets are currently connected to
via getsockopt and the auxiliary data mechanism of recvmsg.

Patch purpose:

This patch enables a security-aware application to retrieve the
security context of an IPSec security association a particular TCP or
UDP socket is using.  The application can then use this security
context to determine the security context for processing on behalf of
the peer at the other end of this connection.  In the case of UDP, the
security context is for each individual packet.  An example
application is the inetd daemon, which could be modified to start
daemons running at security contexts dependent on the remote client.

Patch design approach:

- Design for TCP
The patch enables the SELinux LSM to set the peer security context for
a socket based on the security context of the IPSec security
association.  The application may retrieve this context using
getsockopt.  When called, the kernel determines if the socket is a
connected (TCP_ESTABLISHED) TCP socket and, if so, uses the dst_entry
cache on the socket to retrieve the security associations.  If a
security association has a security context, the context string is
returned, as for UNIX domain sockets.

- Design for UDP
Unlike TCP, UDP is connectionless.  This requires a somewhat different
API to retrieve the peer security context.  With TCP, the peer
security context stays the same throughout the connection, thus it can
be retrieved at any time between when the connection is established
and when it is torn down.  With UDP, each read/write can have
different peer and thus the security context might change every time.
As a result the security context retrieval must be done TOGETHER with
the packet retrieval.

The solution is to build upon the existing Unix domain socket API for
retrieving user credentials.  Linux offers the API for obtaining user
credentials via ancillary messages (i.e., out of band/control messages
that are bundled together with a normal message).

Patch implementation details:

- Implementation for TCP
The security context can be retrieved by applications using getsockopt
with the existing SO_PEERSEC flag.  As an example (ignoring error
checking):

getsockopt(sockfd, SOL_SOCKET, SO_PEERSEC, optbuf, &optlen);
printf("Socket peer context is: %s\n", optbuf);

The SELinux function, selinux_socket_getpeersec, is extended to check
for labeled security associations for connected (TCP_ESTABLISHED ==
sk->sk_state) TCP sockets only.  If so, the socket has a dst_cache of
struct dst_entry values that may refer to security associations.  If
these have security associations with security contexts, the security
context is returned.

getsockopt returns a buffer that contains a security context string or
the buffer is unmodified.

- Implementation for UDP
To retrieve the security context, the application first indicates to
the kernel such desire by setting the IP_PASSSEC option via
getsockopt.  Then the application retrieves the security context using
the auxiliary data mechanism.

An example server application for UDP should look like this:

toggle = 1;
toggle_len = sizeof(toggle);

setsockopt(sockfd, SOL_IP, IP_PASSSEC, &toggle, &toggle_len);
recvmsg(sockfd, &msg_hdr, 0);
if (msg_hdr.msg_controllen > sizeof(struct cmsghdr)) {
    cmsg_hdr = CMSG_FIRSTHDR(&msg_hdr);
    if (cmsg_hdr->cmsg_len <= CMSG_LEN(sizeof(scontext)) &&
        cmsg_hdr->cmsg_level == SOL_IP &&
        cmsg_hdr->cmsg_type == SCM_SECURITY) {
        memcpy(&scontext, CMSG_DATA(cmsg_hdr), sizeof(scontext));
    }
}

ip_setsockopt is enhanced with a new socket option IP_PASSSEC to allow
a server socket to receive security context of the peer.  A new
ancillary message type SCM_SECURITY.

When the packet is received we get the security context from the
sec_path pointer which is contained in the sk_buff, and copy it to the
ancillary message space.  An additional LSM hook,
selinux_socket_getpeersec_udp, is defined to retrieve the security
context from the SELinux space.  The existing function,
selinux_socket_getpeersec does not suit our purpose, because the
security context is copied directly to user space, rather than to
kernel space.

Testing:

We have tested the patch by setting up TCP and UDP connections between
applications on two machines using the IPSec policies that result in
labeled security associations being built.  For TCP, we can then
extract the peer security context using getsockopt on either end.  For
UDP, the receiving end can retrieve the security context using the
auxiliary data mechanism of recvmsg.
Signed-off-by: NCatherine Zhang <cxzhang@watson.ibm.com>
Acked-by: NJames Morris <jmorris@namei.org>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      2c7946a7
    • J
      [IPSEC]: Sync series - update selinux · 8c29bfe1
      由 Jamal Hadi Salim 提交于 
      Add new netlink messages to selinux framework
Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8c29bfe1
    • A
      [PATCH] audit string fields interface + consumer · 93315ed6
      由 Amy Griffis 提交于 
      Updated patch to dynamically allocate audit rule fields in kernel's
internal representation.  Added unlikely() calls for testing memory
allocation result.

Amy Griffis wrote:     [Wed Jan 11 2006, 02:02:31PM EST]
> Modify audit's kernel-userspace interface to allow the specification
> of string fields in audit rules.
>
> Signed-off-by: Amy Griffis <amy.griffis@hp.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
(cherry picked from 5ffc4a863f92351b720fe3e9c5cd647accff9e03 commit)
      93315ed6
    • S
      [PATCH] SE Linux audit events · af601e46
      由 Steve Grubb 提交于 
      Attached is a patch that hardwires important SE Linux events to the audit
system. Please Apply.
Signed-off-by: NSteve Grubb <sgrubb@redhat.com>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
      af601e46