- 28 5月, 2017 1 次提交
-
-
由 Sai Praneeth 提交于
Booting kexec kernel with "efi=old_map" in kernel command line hits kernel panic as shown below. BUG: unable to handle kernel paging request at ffff88007fe78070 IP: virt_efi_set_variable.part.7+0x63/0x1b0 PGD 7ea28067 PUD 7ea2b067 PMD 7ea2d067 PTE 0 [...] Call Trace: virt_efi_set_variable() efi_delete_dummy_variable() efi_enter_virtual_mode() start_kernel() x86_64_start_reservations() x86_64_start_kernel() start_cpu() [ efi=old_map was never intended to work with kexec. The problem with using efi=old_map is that the virtual addresses are assigned from the memory region used by other kernel mappings; vmalloc() space. Potentially there could be collisions when booting kexec if something else is mapped at the virtual address we allocated for runtime service regions in the initial boot - Matt Fleming ] Since kexec was never intended to work with efi=old_map, disable runtime services in kexec if booted with efi=old_map, so that we don't panic. Tested-by: NLee Chun-Yi <jlee@suse.com> Signed-off-by: NSai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk> Acked-by: NDave Young <dyoung@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Shankar <ravi.v.shankar@intel.com> Cc: Ricardo Neri <ricardo.neri@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20170526113652.21339-4-matt@codeblueprint.co.ukSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 09 5月, 2017 1 次提交
-
-
由 Laura Abbott 提交于
set_memory_* functions have moved to set_memory.h. Switch to this explicitly. Link: http://lkml.kernel.org/r/1488920133-27229-6-git-send-email-labbott@redhat.comSigned-off-by: NLaura Abbott <labbott@redhat.com> Acked-by: NIngo Molnar <mingo@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 2月, 2017 2 次提交
-
-
由 Dave Young 提交于
It is not obvious if the reserved boot area are added correctly, add a efi_print_memmap() call to print the new memmap. Tested-by: NNicolai Stange <nicstange@gmail.com> Signed-off-by: NDave Young <dyoung@redhat.com> Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: NNicolai Stange <nicstange@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1485868902-20401-10-git-send-email-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Dave Young 提交于
Before invoking the arch specific handler, efi_mem_reserve() reserves the given memory region through memblock. efi_bgrt_init() will call efi_mem_reserve() after mm_init(), at which time memblock is dead and should not be used anymore. The EFI BGRT code depends on ACPI initialization to get the BGRT ACPI table, so move parsing of the BGRT table to ACPI early boot code to ensure that efi_mem_reserve() in EFI BGRT code still use memblock safely. Tested-by: NBhupesh Sharma <bhsharma@redhat.com> Signed-off-by: NDave Young <dyoung@redhat.com> Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-acpi@vger.kernel.org Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1485868902-20401-9-git-send-email-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 29 1月, 2017 2 次提交
-
-
由 Ingo Molnar 提交于
The e820__update_table() parameters are pretty complex: arch/x86/include/asm/e820/api.h:extern int e820__update_table(struct e820_entry *biosmap, int max_nr_map, u32 *pnr_map); But 90% of the usage is trivial: arch/x86/kernel/e820.c: if (e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries)) arch/x86/kernel/e820.c: e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries); arch/x86/kernel/e820.c: e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries); arch/x86/kernel/e820.c: if (e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries) < 0) arch/x86/kernel/e820.c: e820__update_table(boot_params.e820_table, ARRAY_SIZE(boot_params.e820_table), &new_nr); arch/x86/kernel/early-quirks.c: e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries); arch/x86/kernel/setup.c: e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries); arch/x86/kernel/setup.c: e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries); arch/x86/platform/efi/efi.c: e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries); arch/x86/xen/setup.c: e820__update_table(xen_e820_table.entries, ARRAY_SIZE(xen_e820_table.entries), arch/x86/xen/setup.c: e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries); arch/x86/xen/setup.c: e820__update_table(xen_e820_table.entries, ARRAY_SIZE(xen_e820_table.entries), as it only uses an exiting struct e820_table's entries array, its size and its current number of entries as input and output arguments. Only one use is non-trivial: arch/x86/kernel/e820.c: e820__update_table(boot_params.e820_table, ARRAY_SIZE(boot_params.e820_table), &new_nr); ... which call updates the E820 table in the zeropage in-situ, and the layout there does not match that of 'struct e820_table' (in particular nr_entries is at a different offset, hardcoded by the boot protocol). Simplify all this by introducing a low level __e820__update_table() API that the zeropage update call can use, and simplifying the main e820__update_table() call signature down to: int e820__update_table(struct e820_table *table); This visibly simplifies all the call sites: arch/x86/include/asm/e820/api.h:extern int e820__update_table(struct e820_table *table); arch/x86/include/asm/e820/types.h: * call to e820__update_table() to remove duplicates. The allowance arch/x86/kernel/e820.c: * The return value from e820__update_table() is zero if it arch/x86/kernel/e820.c:int __init e820__update_table(struct e820_table *table) arch/x86/kernel/e820.c: if (e820__update_table(e820_table)) arch/x86/kernel/e820.c: e820__update_table(e820_table_firmware); arch/x86/kernel/e820.c: e820__update_table(e820_table); arch/x86/kernel/e820.c: e820__update_table(e820_table); arch/x86/kernel/e820.c: if (e820__update_table(e820_table) < 0) arch/x86/kernel/early-quirks.c: e820__update_table(e820_table); arch/x86/kernel/setup.c: e820__update_table(e820_table); arch/x86/kernel/setup.c: e820__update_table(e820_table); arch/x86/platform/efi/efi.c: e820__update_table(e820_table); arch/x86/xen/setup.c: e820__update_table(&xen_e820_table); arch/x86/xen/setup.c: e820__update_table(e820_table); arch/x86/xen/setup.c: e820__update_table(&xen_e820_table); No change in functionality. Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Jackson <pj@sgi.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
So there's a number of constants that start with "E820" but which are not types - these create a confusing mixture when seen together with 'enum e820_type' values: E820MAP E820NR E820_X_MAX E820MAX To better differentiate the 'enum e820_type' values prefix them with E820_TYPE_. No change in functionality. Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Jackson <pj@sgi.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 28 1月, 2017 6 次提交
-
-
由 Ingo Molnar 提交于
We have these three related functions: extern void e820_add_region(u64 start, u64 size, int type); extern u64 e820_update_range(u64 start, u64 size, unsigned old_type, unsigned new_type); extern u64 e820_remove_range(u64 start, u64 size, unsigned old_type, int checktype); But it's not clear from the naming that they are 3 operations based around the same 'memory range' concept. Rename them to better signal this, and move the prototypes next to each other: extern void e820__range_add (u64 start, u64 size, int type); extern u64 e820__range_update(u64 start, u64 size, unsigned old_type, unsigned new_type); extern u64 e820__range_remove(u64 start, u64 size, unsigned old_type, int checktype); Note that this improved organization of the functions shows another problem that was easy to miss before: sometimes the E820 entry type is 'int', sometimes 'unsigned int' - but this will be fixed in a separate patch. No change in functionality. Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Jackson <pj@sgi.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
sanitize_e820_table() is a minor misnomer in that it suggests that the E820 table requires sanitizing - which implies that it will only do anything if the E820 table is irregular (not sane). That is wrong, because sanitize_e820_table() also does a very regular sorting of the E820 table, which is a necessity in the basic append-only flow of E820 updates the kernel is allowed to perform to it. So rename it to e820__update_table() to include that purpose as well. This also lines up all the table-update functions into a coherent naming family: int e820__update_table(struct e820_entry *biosmap, int max_nr_map, u32 *pnr_map); void e820__update_table_print(void); void e820__update_table_firmware(void); No change in functionality. Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Jackson <pj@sgi.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
So the e820_table->map and e820_table->nr_map names are a bit confusing, because it's not clear what a 'map' really means (it could be a bitmap, or some other data structure), nor is it clear what nr_map means (is it a current index, or some other count). Rename the fields from: e820_table->map => e820_table->entries e820_table->nr_map => e820_table->nr_entries which makes it abundantly clear that these are entries of the table, and that the size of the table is ->nr_entries. Propagate the changes to all affected files. Where necessary, adjust local variable names to better reflect the new field names. No change in functionality. Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Jackson <pj@sgi.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
No change in functionality. Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Jackson <pj@sgi.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
In line with the rename to 'struct e820_array', harmonize the naming of common e820 table variable names as well: e820 => e820_array e820_saved => e820_array_saved e820_map => e820_array initial_e820 => e820_array_init This makes the variable names more consistent and easier to grep for. No change in functionality. Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Jackson <pj@sgi.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
A commonly used lowlevel x86 header, asm/pgtable.h, includes asm/e820/api.h spuriously, without making direct use of it. Removing it is not simple: over the years various .c code learned to rely on this indirect inclusion. Remove the unnecessary include - this should speed up the kernel build a bit, as a large header is not included anymore in totally unrelated code. Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Jackson <pj@sgi.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 14 1月, 2017 1 次提交
-
-
由 Peter Jones 提交于
Some machines, such as the Lenovo ThinkPad W541 with firmware GNET80WW (2.28), include memory map entries with phys_addr=0x0 and num_pages=0. These machines fail to boot after the following commit, commit 8e80632f ("efi/esrt: Use efi_mem_reserve() and avoid a kmalloc()") Fix this by removing such bogus entries from the memory map. Furthermore, currently the log output for this case (with efi=debug) looks like: [ 0.000000] efi: mem45: [Reserved | | | | | | | | | | | | ] range=[0x0000000000000000-0xffffffffffffffff] (0MB) This is clearly wrong, and also not as informative as it could be. This patch changes it so that if we find obviously invalid memory map entries, we print an error and skip those entries. It also detects the display of the address range calculation overflow, so the new output is: [ 0.000000] efi: [Firmware Bug]: Invalid EFI memory map entries: [ 0.000000] efi: mem45: [Reserved | | | | | | | | | | | | ] range=[0x0000000000000000-0x0000000000000000] (invalid) It also detects memory map sizes that would overflow the physical address, for example phys_addr=0xfffffffffffff000 and num_pages=0x0200000000000001, and prints: [ 0.000000] efi: [Firmware Bug]: Invalid EFI memory map entries: [ 0.000000] efi: mem45: [Reserved | | | | | | | | | | | | ] range=[phys_addr=0xfffffffffffff000-0x20ffffffffffffffff] (invalid) It then removes these entries from the memory map. Signed-off-by: NPeter Jones <pjones@redhat.com> Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> [ardb: refactor for clarity with no functional changes, avoid PAGE_SHIFT] Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk> [Matt: Include bugzilla info in commit log] Cc: <stable@vger.kernel.org> # v4.9+ Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://bugzilla.kernel.org/show_bug.cgi?id=191121Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 13 11月, 2016 1 次提交
-
-
由 Borislav Petkov 提交于
Fix this when building on 32-bit: arch/x86/platform/efi/efi.c: In function ‘__efi_enter_virtual_mode’: arch/x86/platform/efi/efi.c:911:5: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] (efi_memory_desc_t *)pa); ^ arch/x86/platform/efi/efi.c:918:5: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] (efi_memory_desc_t *)pa); ^ The @pa local variable is declared as phys_addr_t and that is a u64 when CONFIG_PHYS_ADDR_T_64BIT=y. (The last is enabled on 32-bit on a PAE build.) However, its value comes from __pa() which is basically doing pointer arithmetic and checking, and returns unsigned long as it is the native pointer width. So let's use an unsigned long too. It should be fine to do so because the later users cast it to a pointer too. Signed-off-by: NBorislav Petkov <bp@suse.de> Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20161112210424.5157-2-matt@codeblueprint.co.ukSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 21 9月, 2016 1 次提交
-
-
由 Denys Vlasenko 提交于
This patch turns e820 and e820_saved into pointers to e820 tables, of the same size as before. Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com> Acked-by: NThomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/20160917213927.1787-2-dvlasenk@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 09 9月, 2016 5 次提交
-
-
由 Ricardo Neri 提交于
Commit 7b02d53e7852 ("efi: Allow drivers to reserve boot services forever") introduced a new efi_mem_reserve to reserve the boot services memory regions forever. This reservation involves allocating a new EFI memory range descriptor. However, allocation can only succeed if there is memory available for the allocation. Otherwise, error such as the following may occur: esrt: Reserving ESRT space from 0x000000003dd6a000 to 0x000000003dd6a010. Kernel panic - not syncing: ERROR: Failed to allocate 0x9f0 bytes below \ 0x0. CPU: 0 PID: 0 Comm: swapper Not tainted 4.7.0-rc5+ #503 0000000000000000 ffffffff81e03ce0 ffffffff8131dae8 ffffffff81bb6c50 ffffffff81e03d70 ffffffff81e03d60 ffffffff8111f4df 0000000000000018 ffffffff81e03d70 ffffffff81e03d08 00000000000009f0 00000000000009f0 Call Trace: [<ffffffff8131dae8>] dump_stack+0x4d/0x65 [<ffffffff8111f4df>] panic+0xc5/0x206 [<ffffffff81f7c6d3>] memblock_alloc_base+0x29/0x2e [<ffffffff81f7c6e3>] memblock_alloc+0xb/0xd [<ffffffff81f6c86d>] efi_arch_mem_reserve+0xbc/0x134 [<ffffffff81fa3280>] efi_mem_reserve+0x2c/0x31 [<ffffffff81fa3280>] ? efi_mem_reserve+0x2c/0x31 [<ffffffff81fa40d3>] efi_esrt_init+0x19e/0x1b4 [<ffffffff81f6d2dd>] efi_init+0x398/0x44a [<ffffffff81f5c782>] setup_arch+0x415/0xc30 [<ffffffff81f55af1>] start_kernel+0x5b/0x3ef [<ffffffff81f55434>] x86_64_start_reservations+0x2f/0x31 [<ffffffff81f55520>] x86_64_start_kernel+0xea/0xed ---[ end Kernel panic - not syncing: ERROR: Failed to allocate 0x9f0 bytes below 0x0. An inspection of the memblock configuration reveals that there is no memory available for the allocation: MEMBLOCK configuration: memory size = 0x0 reserved size = 0x4f339c0 memory.cnt = 0x1 memory[0x0] [0x00000000000000-0xffffffffffffffff], 0x0 bytes on node 0\ flags: 0x0 reserved.cnt = 0x4 reserved[0x0] [0x0000000008c000-0x0000000008c9bf], 0x9c0 bytes flags: 0x0 reserved[0x1] [0x0000000009f000-0x000000000fffff], 0x61000 bytes\ flags: 0x0 reserved[0x2] [0x00000002800000-0x0000000394bfff], 0x114c000 bytes\ flags: 0x0 reserved[0x3] [0x000000304e4000-0x00000034269fff], 0x3d86000 bytes\ flags: 0x0 This situation can be avoided if we call efi_esrt_init after memblock has memory regions for the allocation. Also, the EFI ESRT driver makes use of early_memremap'pings. Therfore, we do not want to defer efi_esrt_init for too long. We must call such function while calls to early_memremap are still valid. A good place to meet the two aforementioned conditions is right after memblock_x86_fill, grouped with other EFI-related functions. Reported-by: NScott Lawson <scott.lawson@intel.com> Signed-off-by: NRicardo Neri <ricardo.neri-calderon@linux.intel.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Peter Jones <pjones@redhat.com> Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk>
-
由 Matt Fleming 提交于
Now that efi.memmap is available all of the time there's no need to allocate and build a separate copy of the EFI memory map. Furthermore, efi.memmap contains boot services regions but only those regions that have been reserved via efi_mem_reserve(). Using efi.memmap allows us to pass boot services across kexec reboot so that the ESRT and BGRT drivers will now work. Tested-by: Dave Young <dyoung@redhat.com> [kexec/kdump] Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [arm] Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Peter Jones <pjones@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk>
-
由 Matt Fleming 提交于
Drivers need a way to access the EFI memory map at runtime. ARM and arm64 currently provide this by remapping the EFI memory map into the vmalloc space before setting up the EFI virtual mappings. x86 does not provide this functionality which has resulted in the code in efi_mem_desc_lookup() where it will manually map individual EFI memmap entries if the memmap has already been torn down on x86, /* * If a driver calls this after efi_free_boot_services, * ->map will be NULL, and the target may also not be mapped. * So just always get our own virtual map on the CPU. * */ md = early_memremap(p, sizeof (*md)); There isn't a good reason for not providing a permanent EFI memory map for runtime queries, especially since the EFI regions are not mapped into the standard kernel page tables. Tested-by: Dave Young <dyoung@redhat.com> [kexec/kdump] Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [arm] Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Peter Jones <pjones@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk>
-
由 Matt Fleming 提交于
Every EFI architecture apart from ia64 needs to setup the EFI memory map at efi.memmap, and the code for doing that is essentially the same across all implementations. Therefore, it makes sense to factor this out into the common code under drivers/firmware/efi/. The only slight variation is the data structure out of which we pull the initial memory map information, such as physical address, memory descriptor size and version, etc. We can address this by passing a generic data structure (struct efi_memory_map_data) as the argument to efi_memmap_init_early() which contains the minimum info required for initialising the memory map. In the process, this patch also fixes a few undesirable implementation differences: - ARM and arm64 were failing to clear the EFI_MEMMAP bit when unmapping the early EFI memory map. EFI_MEMMAP indicates whether the EFI memory map is mapped (not the regions contained within) and can be traversed. It's more correct to set the bit as soon as we memremap() the passed in EFI memmap. - Rename efi_unmmap_memmap() to efi_memmap_unmap() to adhere to the regular naming scheme. This patch also uses a read-write mapping for the memory map instead of the read-only mapping currently used on ARM and arm64. x86 needs the ability to update the memory map in-place when assigning virtual addresses to regions (efi_map_region()) and tagging regions when reserving boot services (efi_reserve_boot_services()). There's no way for the generic fake_mem code to know which mapping to use without introducing some arch-specific constant/hook, so just use read-write since read-only is of dubious value for the EFI memory map. Tested-by: Dave Young <dyoung@redhat.com> [kexec/kdump] Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [arm] Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Peter Jones <pjones@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk>
-
由 Matt Fleming 提交于
EFI regions are currently mapped in two separate places. The bulk of the work is done in efi_map_regions() but when CONFIG_EFI_MIXED is enabled the additional regions that are required when operating in mixed mode are mapping in efi_setup_page_tables(). Pull everything into efi_map_regions() and refactor the test for which regions should be mapped into a should_map_region() function. Generously sprinkle comments to clarify the different cases. Acked-by: NBorislav Petkov <bp@suse.de> Tested-by: Dave Young <dyoung@redhat.com> [kexec/kdump] Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [arm] Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk>
-
- 15 7月, 2016 1 次提交
-
-
由 Andy Lutomirski 提交于
kernel_unmap_pages_in_pgd() is dangerous: if a PGD entry in init_mm.pgd were to be cleared, callers would need to ensure that the pgd entry hadn't been propagated to any other pgd. Its only caller was efi_cleanup_page_tables(), and that, in turn, was unused, so just delete both functions. This leaves a couple of other helpers unused, so delete them, too. Signed-off-by: NAndy Lutomirski <luto@kernel.org> Reviewed-by: NMatt Fleming <matt@codeblueprint.co.uk> Acked-by: NBorislav Petkov <bp@suse.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/77ff20fdde3b75cd393be5559ad8218870520248.1468527351.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 27 6月, 2016 1 次提交
-
-
由 Arnd Bergmann 提交于
Nothing calls the efi_get_time() function on x86, but it does suffer from the 32-bit time_t overflow in 2038. This removes the function, we can always put it back in case we need it later. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk> Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1466839230-12781-8-git-send-email-matt@codeblueprint.co.ukSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 04 6月, 2016 1 次提交
-
-
由 Arnd Bergmann 提交于
Commit 3195ef59 ("x86: Do full rtc synchronization with ntp") had the side-effect of unconditionally enabling the RTC_LIB symbol on x86, which in turn disables the selection of the CONFIG_RTC and CONFIG_GEN_RTC drivers that contain a two older implementations of the CONFIG_RTC_DRV_CMOS driver. This removes x86 from the list for genrtc, and changes all references to the asm/rtc.h header to instead point to the interfaces from linux/mc146818rtc.h. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
-
- 28 4月, 2016 5 次提交
-
-
由 Matt Fleming 提交于
This symbol is always set which makes it useless. Additionally we have a kernel command-line switch, efi=debug, which actually controls the printing of the memory map. Reported-by: NRobert Elliott <elliott@hpe.com> Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk> Acked-by: NBorislav Petkov <bp@suse.de> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1461614832-17633-16-git-send-email-matt@codeblueprint.co.ukSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ard Biesheuvel 提交于
Our efi_memory_desc_t type is based on EFI_MEMORY_DESCRIPTOR version 1 in the UEFI spec. No version updates are expected, but since we are about to introduce support for new firmware tables that use the same descriptor type, it makes sense to at least warn if we encounter other versions. Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1461614832-17633-9-git-send-email-matt@codeblueprint.co.ukSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Matt Fleming 提交于
Abolish the poorly named EFI memory map, 'memmap'. It is shadowed by a bunch of local definitions in various files and having two ways to access the EFI memory map ('efi.memmap' vs. 'memmap') is rather confusing. Furthermore, IA64 doesn't even provide this global object, which has caused issues when trying to write generic EFI memmap code. Replace all occurrences with efi.memmap, and convert the remaining iterator code to use for_each_efi_mem_desc(). Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk> Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Luck, Tony <tony.luck@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1461614832-17633-8-git-send-email-matt@codeblueprint.co.ukSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Matt Fleming 提交于
Most of the users of for_each_efi_memory_desc() are equally happy iterating over the EFI memory map in efi.memmap instead of 'memmap', since the former is usually a pointer to the latter. For those users that want to specify an EFI memory map other than efi.memmap, that can be done using for_each_efi_memory_desc_in_map(). One such example is in the libstub code where the firmware is queried directly for the memory map, it gets iterated over, and then freed. This change goes part of the way toward deleting the global 'memmap' variable, which is not universally available on all architectures (notably IA64) and is rather poorly named. Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk> Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Mark Salter <msalter@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1461614832-17633-7-git-send-email-matt@codeblueprint.co.ukSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ard Biesheuvel 提交于
The EFI_SYSTEM_TABLES status bit is set by all EFI supporting architectures upon discovery of the EFI system table, but the bit is never tested in any code we have in the tree. So remove it. Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Luck, Tony <tony.luck@intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1461614832-17633-2-git-send-email-matt@codeblueprint.co.ukSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 22 2月, 2016 1 次提交
-
-
由 Sai Praneeth 提交于
Now that we have EFI memory region bits that indicate which regions do not need execute permission or read/write permission in the page tables, let's use them. We also check for EFI_NX_PE_DATA and only enforce the restrictive mappings if it's present (to allow us to ignore buggy firmware that sets bits it didn't mean to and to preserve backwards compatibility). Instead of assuming that firmware would set appropriate attributes in memory descriptor like EFI_MEMORY_RO for code and EFI_MEMORY_XP for data, we can expect some firmware out there which might only set *type* in memory descriptor to be EFI_RUNTIME_SERVICES_CODE or EFI_RUNTIME_SERVICES_DATA leaving away attribute. This will lead to improper mappings of EFI runtime regions. In order to avoid it, we check attribute and type of memory descriptor to update mappings and moreover Windows works this way. Signed-off-by: NSai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Lee, Chun-Yi <jlee@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Shankar <ravi.v.shankar@intel.com> Cc: Ricardo Neri <ricardo.neri@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1455712566-16727-13-git-send-email-matt@codeblueprint.co.ukSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 03 2月, 2016 1 次提交
-
-
由 Robert Elliott 提交于
Adjust efi_print_memmap to print the real end address of each range, not 1 byte beyond. This matches other prints like those for SRAT and nosave memory. While investigating grub persistent memory corruption issues, it was helpful to make this table match the ending address convention used by: * the kernel's e820 table prints BIOS-e820: [mem 0x0000001680000000-0x0000001c7fffffff] reserved * the kernel's nosave memory prints PM: Registered nosave memory: [mem 0x880000000-0xc7fffffff] * the kernel's ACPI System Resource Affinity Table prints SRAT: Node 1 PXM 1 [mem 0x480000000-0x87fffffff] * grub's lsmmap and lsefimmap commands reserved 0000001680000000-0000001c7fffffff 00600000 24GiB UC WC WT WB NV * the UEFI shell's memmap command Reserved 000000007FC00000-000000007FFFFFFF 0000000000000400 0000000000000001 For example, if you grep all the various logs for c7fffffff, you won't find the kernel's line if it uses c80000000. Also, change the closing ) to ] to match the opening [. old: efi: mem61: [Persistent Memory | | | | | | | |WB|WT|WC|UC] range=[0x0000000880000000-0x0000000c80000000) (16384MB) new: efi: mem61: [Persistent Memory | | | | | | | |WB|WT|WC|UC] range=[0x0000000880000000-0x0000000c7fffffff] (16384MB) Signed-off-by: NRobert Elliott <elliott@hpe.com> Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk> Reviewed-by: NLaszlo Ersek <lersek@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1454364428-494-12-git-send-email-matt@codeblueprint.co.ukSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 22 1月, 2016 1 次提交
-
-
由 Matt Fleming 提交于
The switch to using a new dedicated page table for EFI runtime calls in commit commit 67a9108e ("x86/efi: Build our own page table structures") failed to take into account changes required for the kexec code paths, which are unfortunately duplicated in the EFI code. Call the allocation and setup functions in kexec_enter_virtual_mode() just like we do for __efi_enter_virtual_mode() to avoid hitting NULL-pointer dereferences when making EFI runtime calls. At the very least, the call to efi_setup_page_tables() should have existed for kexec before the following commit: 67a9108e ("x86/efi: Build our own page table structures") Things just magically worked because we were actually using the kernel's page tables that contained the required mappings. Reported-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com> Tested-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Young <dyoung@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1453385519-11477-1-git-send-email-matt@codeblueprint.co.ukSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 29 11月, 2015 1 次提交
-
-
由 Matt Fleming 提交于
With commit e1a58320 ("x86/mm: Warn on W^X mappings") all users booting on 64-bit UEFI machines see the following warning, ------------[ cut here ]------------ WARNING: CPU: 7 PID: 1 at arch/x86/mm/dump_pagetables.c:225 note_page+0x5dc/0x780() x86/mm: Found insecure W+X mapping at address ffff88000005f000/0xffff88000005f000 ... x86/mm: Checked W+X mappings: FAILED, 165660 W+X pages found. ... This is caused by mapping EFI regions with RWX permissions. There isn't much we can do to restrict the permissions for these regions due to the way the firmware toolchains mix code and data, but we can at least isolate these mappings so that they do not appear in the regular kernel page tables. In commit d2f7cbe7 ("x86/efi: Runtime services virtual mapping") we started using 'trampoline_pgd' to map the EFI regions because there was an existing identity mapping there which we use during the SetVirtualAddressMap() call and for broken firmware that accesses those addresses. But 'trampoline_pgd' shares some PGD entries with 'swapper_pg_dir' and does not provide the isolation we require. Notably the virtual address for __START_KERNEL_map and MODULES_START are mapped by the same PGD entry so we need to be more careful when copying changes over in efi_sync_low_kernel_mappings(). This patch doesn't go the full mile, we still want to share some PGD entries with 'swapper_pg_dir'. Having completely separate page tables brings its own issues such as synchronising new mappings after memory hotplug and module loading. Sharing also keeps memory usage down. Signed-off-by: NMatt Fleming <matt@codeblueprint.co.uk> Reviewed-by: NBorislav Petkov <bp@suse.de> Acked-by: NBorislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1448658575-17029-6-git-send-email-matt@codeblueprint.co.ukSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 28 10月, 2015 1 次提交
-
-
由 Ard Biesheuvel 提交于
We have been getting away with using a void* for the physical address of the UEFI memory map, since, even on 32-bit platforms with 64-bit physical addresses, no truncation takes place if the memory map has been allocated by the firmware (which only uses 1:1 virtually addressable memory), which is usually the case. However, commit: 0f96a99d ("efi: Add "efi_fake_mem" boot option") adds code that clones and modifies the UEFI memory map, and the clone may live above 4 GB on 32-bit platforms. This means our use of void* for struct efi_memory_map::phys_map has graduated from 'incorrect but working' to 'incorrect and broken', and we need to fix it. So redefine struct efi_memory_map::phys_map as phys_addr_t, and get rid of a bunch of casts that are now unneeded. Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: NMatt Fleming <matt@codeblueprint.co.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: izumi.taku@jp.fujitsu.com Cc: kamezawa.hiroyu@jp.fujitsu.com Cc: linux-efi@vger.kernel.org Cc: matt.fleming@intel.com Link: http://lkml.kernel.org/r/1445593697-1342-1-git-send-email-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 12 10月, 2015 2 次提交
-
-
由 Taku Izumi 提交于
This patch renames print_efi_memmap() to efi_print_memmap() and make it global function so that we can invoke it outside of arch/x86/platform/efi/efi.c Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
-
由 Leif Lindholm 提交于
fed6cefe ("x86/efi: Add a "debug" option to the efi= cmdline") adds the DBG flag, but does so for x86 only. Move this early param parsing to core code. Signed-off-by: NLeif Lindholm <leif.lindholm@linaro.org> Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Cc: Mark Salter <msalter@redhat.com> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
-
- 01 10月, 2015 1 次提交
-
-
由 Matt Fleming 提交于
Beginning with UEFI v2.5 EFI_PROPERTIES_TABLE was introduced that signals that the firmware PE/COFF loader supports splitting code and data sections of PE/COFF images into separate EFI memory map entries. This allows the kernel to map those regions with strict memory protections, e.g. EFI_MEMORY_RO for code, EFI_MEMORY_XP for data, etc. Unfortunately, an unwritten requirement of this new feature is that the regions need to be mapped with the same offsets relative to each other as observed in the EFI memory map. If this is not done crashes like this may occur, BUG: unable to handle kernel paging request at fffffffefe6086dd IP: [<fffffffefe6086dd>] 0xfffffffefe6086dd Call Trace: [<ffffffff8104c90e>] efi_call+0x7e/0x100 [<ffffffff81602091>] ? virt_efi_set_variable+0x61/0x90 [<ffffffff8104c583>] efi_delete_dummy_variable+0x63/0x70 [<ffffffff81f4e4aa>] efi_enter_virtual_mode+0x383/0x392 [<ffffffff81f37e1b>] start_kernel+0x38a/0x417 [<ffffffff81f37495>] x86_64_start_reservations+0x2a/0x2c [<ffffffff81f37582>] x86_64_start_kernel+0xeb/0xef Here 0xfffffffefe6086dd refers to an address the firmware expects to be mapped but which the OS never claimed was mapped. The issue is that included in these regions are relative addresses to other regions which were emitted by the firmware toolchain before the "splitting" of sections occurred at runtime. Needless to say, we don't satisfy this unwritten requirement on x86_64 and instead map the EFI memory map entries in reverse order. The above crash is almost certainly triggerable with any kernel newer than v3.13 because that's when we rewrote the EFI runtime region mapping code, in commit d2f7cbe7 ("x86/efi: Runtime services virtual mapping"). For kernel versions before v3.13 things may work by pure luck depending on the fragmentation of the kernel virtual address space at the time we map the EFI regions. Instead of mapping the EFI memory map entries in reverse order, where entry N has a higher virtual address than entry N+1, map them in the same order as they appear in the EFI memory map to preserve this relative offset between regions. This patch has been kept as small as possible with the intention that it should be applied aggressively to stable and distribution kernels. It is very much a bugfix rather than support for a new feature, since when EFI_PROPERTIES_TABLE is enabled we must map things as outlined above to even boot - we have no way of asking the firmware not to split the code/data regions. In fact, this patch doesn't even make use of the more strict memory protections available in UEFI v2.5. That will come later. Suggested-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Reported-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NMatt Fleming <matt.fleming@intel.com> Cc: <stable@vger.kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Chun-Yi <jlee@suse.com> Cc: Dave Young <dyoung@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: James Bottomley <JBottomley@Odin.com> Cc: Lee, Chun-Yi <jlee@suse.com> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Jones <pjones@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1443218539-7610-2-git-send-email-matt@codeblueprint.co.ukSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 11 9月, 2015 1 次提交
-
-
由 Dave Young 提交于
There are two kexec load syscalls, kexec_load another and kexec_file_load. kexec_file_load has been splited as kernel/kexec_file.c. In this patch I split kexec_load syscall code to kernel/kexec.c. And add a new kconfig option KEXEC_CORE, so we can disable kexec_load and use kexec_file_load only, or vice verse. The original requirement is from Ted Ts'o, he want kexec kernel signature being checked with CONFIG_KEXEC_VERIFY_SIG enabled. But kexec-tools use kexec_load syscall can bypass the checking. Vivek Goyal proposed to create a common kconfig option so user can compile in only one syscall for loading kexec kernel. KEXEC/KEXEC_FILE selects KEXEC_CORE so that old config files still work. Because there's general code need CONFIG_KEXEC_CORE, so I updated all the architecture Kconfig with a new option KEXEC_CORE, and let KEXEC selects KEXEC_CORE in arch Kconfig. Also updated general kernel code with to kexec_load syscall. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NDave Young <dyoung@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Petr Tesarik <ptesarik@suse.cz> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Josh Boyer <jwboyer@fedoraproject.org> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 8月, 2015 1 次提交
-
-
x86 and ia64 implement efi_mem_attributes() differently. This function needs to be available for other architectures (such as arm64) as well, such as for the purpose of ACPI/APEI. ia64 EFI does not set up a 'memmap' variable and does not set the EFI_MEMMAP flag, so it needs to have its unique implementation of efi_mem_attributes(). Move efi_mem_attributes() implementation from x86 to the core EFI code, and declare it with __weak. It is recommended that other architectures should not override the default implementation. Signed-off-by: NJonathan (Zhixiong) Zhang <zjzhang@codeaurora.org> Signed-off-by: NMatt Fleming <matt.fleming@intel.com> Reviewed-by: NMatt Fleming <matt.fleming@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1438936621-5215-4-git-send-email-matt@codeblueprint.co.ukSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 31 7月, 2015 1 次提交
-
-
由 Ricardo Neri 提交于
Even though it is documented how to specifiy efi parameters, it is possible to cause a kernel panic due to a dereference of a NULL pointer when parsing such parameters if "efi" alone is given: PANIC: early exception 0e rip 10:ffffffff812fb361 error 0 cr2 0 [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.2.0-rc1+ #450 [ 0.000000] ffffffff81fe20a9 ffffffff81e03d50 ffffffff8184bb0f 00000000000003f8 [ 0.000000] 0000000000000000 ffffffff81e03e08 ffffffff81f371a1 64656c62616e6520 [ 0.000000] 0000000000000069 000000000000005f 0000000000000000 0000000000000000 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff8184bb0f>] dump_stack+0x45/0x57 [ 0.000000] [<ffffffff81f371a1>] early_idt_handler_common+0x81/0xae [ 0.000000] [<ffffffff812fb361>] ? parse_option_str+0x11/0x90 [ 0.000000] [<ffffffff81f4dd69>] arch_parse_efi_cmdline+0x15/0x42 [ 0.000000] [<ffffffff81f376e1>] do_early_param+0x50/0x8a [ 0.000000] [<ffffffff8106b1b3>] parse_args+0x1e3/0x400 [ 0.000000] [<ffffffff81f37a43>] parse_early_options+0x24/0x28 [ 0.000000] [<ffffffff81f37691>] ? loglevel+0x31/0x31 [ 0.000000] [<ffffffff81f37a78>] parse_early_param+0x31/0x3d [ 0.000000] [<ffffffff81f3ae98>] setup_arch+0x2de/0xc08 [ 0.000000] [<ffffffff8109629a>] ? vprintk_default+0x1a/0x20 [ 0.000000] [<ffffffff81f37b20>] start_kernel+0x90/0x423 [ 0.000000] [<ffffffff81f37495>] x86_64_start_reservations+0x2a/0x2c [ 0.000000] [<ffffffff81f37582>] x86_64_start_kernel+0xeb/0xef [ 0.000000] RIP 0xffffffff81ba2efc This panic is not reproducible with "efi=" as this will result in a non-NULL zero-length string. Thus, verify that the pointer to the parameter string is not NULL. This is consistent with other parameter-parsing functions which check for NULL pointers. Signed-off-by: NRicardo Neri <ricardo.neri-calderon@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
-
- 25 6月, 2015 1 次提交
-
-
由 Tony Luck 提交于
UEFI GetMemoryMap() uses a new attribute bit to mark mirrored memory address ranges. See UEFI 2.5 spec pages 157-158: http://www.uefi.org/sites/default/files/resources/UEFI%202_5.pdf On EFI enabled systems scan the memory map and tell memblock about any mirrored ranges. Signed-off-by: NTony Luck <tony.luck@intel.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Xiexiuqi <xiexiuqi@huawei.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-