- 31 5月, 2007 2 次提交
-
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kazunori MIYAZAWA 提交于
Signed-off-by: NKazunori MIYAZAWA <kazunori@miyazawa.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 5月, 2007 5 次提交
-
-
由 David S. Miller 提交于
The current IPSEC rule resolution behavior we have does not work for a lot of people, even though technically it's an improvement from the -EAGAIN buisness we had before. Right now we'll block until the key manager resolves the route. That works for simple cases, but many folks would rather packets get silently dropped until the key manager resolves the IPSEC rules. We can't tell these folks to "set the socket non-blocking" because they don't have control over the non-block setting of things like the sockets used to resolve DNS deep inside of the resolver libraries in libc. With that in mind I coded up the patch below with some help from Herbert Xu which provides packet-drop behavior during larval state resolution, controllable via sysctl and off by default. This lays the framework to either: 1) Make this default at some point or... 2) Move this logic into xfrm{4,6}_policy.c and implement the ARP-like resolution queue we've all been dreaming of. The idea would be to queue packets to the policy, then once the larval state is resolved by the key manager we re-resolve the route and push the packets out. The packets would timeout if the rule didn't get resolved in a certain amount of time. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jing Min Zhao 提交于
They're the same. Signed-off-by: NJing Min Zhao <zhaojingmin@vivecode.com> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
When the packet size is changed by the FTP NAT helper, the connection tracking helper adjusts the sequence number of the newline character by the size difference. This is wrong because NAT sequence number adjustment happens after helpers are called, so the unadjusted number is compared to the already adjusted one. Based on report by YU, Haitao <yuhaitao@tsinghua.org.cn> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Milan Kocian 提交于
When you replace route via ip r r command the netlink multicast message is not send. This patch corrects it. NL message is sent with NLM_F_REPLACE flag. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=8320Signed-off-by: NMilan Kocian <milon@wq.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: NJan Engelhardt <jengelh@gmx.de> Acked-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 5月, 2007 4 次提交
-
-
由 Patrick McHardy 提交于
When icmp_send is called on the local output path before the packet hits ip_output, skb->dev is not set, causing a crash when sysctl_icmp_errors_use_inbound_ifaddr is set. This can happen with the netfilter REJECT target or IPsec tunnels. Let routing decide the ICMP source address in that case, since the packet is locally generated there is no inbound interface and the sysctl should not apply. The option actually seems to be unfixable broken, on the path after ip_output() skb->dev points to the outgoing device and we don't know the incoming device anymore, so its going to do the absolute wrong thing and pick the address of the outgoing interface. Add a comment about this. Reported by Curtis Doty <Curtis@GreenKey.net>. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
The option is named CONFIG_NF_NAT not CONFIG_IP_NF_NAT. Remove the ifdef completely since helpers also expect defragmented packet even without NAT. Noticed by Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
State could become inconsistent in two cases: 1) Userspace disabled FRTO by tuning sysctl when one of the TCP flows was in the middle of FRTO algorithm (and then RTO is again triggered) 2) SACK reneging occurs during FRTO algorithm A simple solution is just to abort the previous FRTO when such obscure condition occurs... Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
The conservative spurious RTO response did not queue CWR even though the sending rate was lowered. Whenever reduction happens regardless of reason, CWR should be sent (forgetting to send it is not very fatal though). A better approach would be to queue CWR when one of the sending rate reducing responses (rate-halving one or this conservative response) is used already at RTO. Doing that would allow CWR to be sent along with the two new data segments that are sent during FRTO. However, it's a bit "racy" because userland could tune the response sysctl to a more aggressive one in between. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 5月, 2007 4 次提交
-
-
由 David S. Miller 提交于
Revert: 2d771cd8 This is dangerous if enabled and a better solution to the problem is being worked on. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dave Jones 提交于
As mentioned in http://bugzilla.kernel.org/show_bug.cgi?id=5015 The helptext implies that this is on by default. This may be true on some distros (Fedora/RHEL have it enabled in /etc/sysctl.conf), but the kernel defaults to it off. Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
These two congestion control modules share code. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Add more comments to describe our version of tcp_slow_start(). Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 5月, 2007 1 次提交
-
-
由 Mitsuru Chinen 提交于
This displays the statistics specified in the updated IP-MIB RFC (RFC4293) in /proc/net/netstat. The reason why these are not displayed in /proc/net/snmp is that some existing utilities are developed under the assumption which ipstat items in /proc/net/snmp is unchanged. Signed-off-by: NMitsuru Chinen <mitch@linux.vnet.ibm.com> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 5月, 2007 5 次提交
-
-
由 Patrick McHardy 提交于
iptables matches and targets expect packets to have at least a full IP header and a valid header length. Ignore packets sent through raw sockets for which this isn't true as in the other tables. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yasuyuki Kozakai 提交于
nf_nat_rule_find, alloc_null_binding and alloc_null_binding_confirmed do not use the argument 'info', which is actually ct->nat.info. If they are necessary to access it again, we can use the argument 'ct' instead. Signed-off-by: NYasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
- move arp_tables initial table structure definitions to arp_tables.h similar to ip_tables and ip6_tables - use C99 initializers - use initializer macros where possible Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
__udp_lib_port_inuse() cannot make direct references to inet_sk(sk)->rcv_saddr as that is ipv4 specific state and this code is used by ipv6 too. Use an operations vector to solve this, and this also paves the way for ipv6 support for non-wild saddr hashing in UDP. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 5月, 2007 2 次提交
-
-
由 Oleg Nesterov 提交于
flush_work(wq, work) doesn't need the first parameter, we can use cwq->wq (this was possible from the very beginnig, I missed this). So we can unify flush_work_keventd and flush_work. Also, rename flush_work() to cancel_work_sync() and fix all callers. Perhaps this is not the best name, but "flush_work" is really bad. (akpm: this is why the earlier patches bypassed maintainers) Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Tejun Heo <htejun@gmail.com> Cc: Auke Kok <auke-jan.h.kok@intel.com>, Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
net/ipv4/ipvs/ip_vs_core.c module_exit ip_vs_cleanup ip_vs_control_cleanup cancel_rearming_delayed_work // done This is unsafe. The module may be unloaded and the memory may be freed while defense_work's handler is still running/preempted. Do flush_work(&defense_work.work) after cancel_rearming_delayed_work(). Alternatively, we could add flush_work() to cancel_rearming_delayed_work(), but note that we can't change cancel_delayed_work() in the same manner because it may be called from atomic context. Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 5月, 2007 3 次提交
-
-
由 Michael Opdenacker 提交于
Signed-off-by: NMichael Opdenacker <michael@free-electrons.com> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
由 David Sterba 提交于
Fix several typos in help text in Kconfig* files. Signed-off-by: NDavid Sterba <dave@jikos.cz> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
由 Randy Dunlap 提交于
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 04 5月, 2007 3 次提交
-
-
由 Srinivas Aji 提交于
When the server drops its connection, NFS client reconnects using the same socket after disconnecting. If the new connection's SYN,ACK doesn't contain the TCP timestamp option and the old connection's did, tp->tcp_header_len is recomputed assuming no timestamp header but tp->rx_opt.tstamp_ok remains set. Then tcp_build_and_update_options() adds in a timestamp option past the end of the allocated TCP header, overwriting TCP data, or when the data is in skb_shinfo(skb)->frags[], overwriting skb_shinfo(skb) causing a crash soon after. (The issue was debugged from such a crash.) Similarly, wscale_ok and sack_ok also get set based on the SYN,ACK packet but not reset on disconnect, since they are zeroed out at initialization. The patch zeroes out the entire tp->rx_opt struct in tcp_disconnect() to avoid this sort of problem. Signed-off-by: NSrinivas Aji <Aji_Srinivas@emc.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelianov 提交于
Cleanup of dev_base list use, with the aim to simplify making device list per-namespace. In almost every occasion, use of dev_base variable and dev->next pointer could be easily replaced by for_each_netdev loop. A few most complicated places were converted to using first_netdev()/next_netdev(). Signed-off-by: NPavel Emelianov <xemul@openvz.org> Acked-by: NKirill Korotaev <dev@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Reuse limited slow-start (RFC3742) included into tcp_cong instead of having another implementation in High Speed TCP. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 5月, 2007 4 次提交
-
-
由 Herbert Xu 提交于
I needed to use this recently to talk to a Cisco server. In my case I only did SNAT while the Cisco server used a different address for RTP traffic than the one for SIP. I discovered that nf_nat_sip NATed the RTP address to the SIP one which was unnecessary but OK. However, in doing so it did not DNAT the destination address on the RTP traffic to the Cisco back to the original RTP address. This patch corrects this by noting down the RTP address and using it when the expectation fires. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jorge Boncompte 提交于
While porting some changes of the 2.6.21-rc7 pptp/proto_gre conntrack and nat modules to a 2.4.32 kernel I noticed that the gre_key function returns a wrong pointer to the GRE key of a version 0 packet thus corrupting the packet payload. The intended behaviour for GREv0 packets is to act like nf_conntrack_proto_generic/nf_nat_proto_unknown so I have ripped the offending functions (not used anymore) and modified the nf_nat_proto_gre modules to not touch version 0 (non PPTP) packets. Signed-off-by: NJorge Boncompte <jorge@dti2.net> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Also accept the --random option for DNAT to allow randomly selecting a destination port from the given range. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Robert P. J. Day 提交于
Delete the apparently unused header file net/ipv4/tcp_yeah.h. Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 5月, 2007 2 次提交
-
-
由 David S. Miller 提交于
When allocating local ports, do not allow a bind to a port with a specific local address when a bind to that port with a wildcard local address already exists. Noticed by Linus. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
I accidently applied an earlier version of Eric Dumazet's patch, from March 21st. His version from March 30th didn't have these bugs, so this just interdiffs to the correct patch. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 4月, 2007 5 次提交
-
-
由 Mitsuru Chinen 提交于
A transmitted IP multicast datagram should be counted as OutMcastPkts. By the same token, a transmitted IP broadcast datagram should be counted as OutBcastPkts. Signed-off-by: NMitsuru Chinen <mitch@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mitsuru Chinen 提交于
A received IP multicast datagram should be counted as InMcastPkts. By the same token, a received IP broadcast datagram should be counted as InBcastPkts. Signed-off-by: NMitsuru Chinen <mitch@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mitsuru Chinen 提交于
An IP datagram which is being discarded because the datagram frame didn't carry enough data should be counted as InTruncatedPkts. Signed-off-by: NMitsuru Chinen <mitch@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mitsuru Chinen 提交于
An IP datagram which is being discarded because of no routes in the forwarding path should be counted as InNoRoutes. Signed-off-by: NMitsuru Chinen <mitch@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
This is a corner case where less than MSS sized new data thingie is awaiting in the send queue. For F-RTO to work correctly, a new data segment must be sent at certain point or F-RTO cannot be used at all. RFC4138 allows overriding of Nagle at that point. Implementation uses frto_counter states 2 and 3 to distinguish when Nagle override is needed. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-