When support for 82577/82578 was added[1] in 2.6.31, PHY wakeup was in-
advertently enabled (even though it does not function properly) on ICH10
LOMs.  This patch makes it so that the ICH10 LOMs use MAC wakeup instead
as was done with the initial support for those devices (i.e. 82567LM-3,
82567LF-3 and 82567V-4).

[1] commit a4f58f54Reported-by: NAurelien Jarno <aurelien@aurel32.net>
Cc: <stable@kernel.org>
Signed-off-by: NBruce Allan <bruce.w.allan@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Reported-by: NStephen Hemminger <shemminger@vyatta.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Sparse complains because the e1000 driver is calling ioread on a pointer
not tagged as __iomem.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Reviewed-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Currently nla_policy_len always returns n * NLA_HDRLEN:
It loops, but does not advance it's iterator.
NLA_UNSPEC == 0 does not contain a .len in any policy.

Trivially fixed by adding p++.
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is similar to what we already do in cdc-phonet.c in the same
situation. pskb_pull() refuses to work with HIGHMEM, even if it is
known that the socket buffer is entirely in "low" memory.
Signed-off-by: NRémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The platform_device_id table is supposed to be zero-terminated.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Clean up entries in 00-INDEX: drop files that have been removed.
Reported-by: NRob Landley <rlandley@parallels.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Acked-by: NRob Landley <rlandley@parallels.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

platform_set_drvdata() was used with argument of incorrect type and
could cause memory corruption. Moreover, because of not setting drvdata
in the correct place not all resources were freed upon module unload.
Signed-off-by: NIlya Yanok <yanok@emcraft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 71d64290 (Driver core: convert platform_{get,set}_drvdata to
static inline functions) now triggers a warning in the macb network
driver:

  CC      drivers/net/macb.o
drivers/net/macb.c: In function ‘macb_mii_init’:
drivers/net/macb.c:263: warning: passing argument 1 of ‘platform_set_drvdata’ from incompatible pointer type
include/linux/platform_device.h:138: note: expected ‘struct platform_device *’ but argument is of type ‘struct net_device *’

Use dev_set_drvdata() on the device embedded in the net_device instead.

Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NJamie Iles <jamie@jamieiles.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

netlink_dump() may failed, but nobody handle its error.
It generates output data, when a previous portion has been returned to
user space. This mechanism works when all data isn't go in skb. If we
enter in netlink_recvmsg() and skb is absent in the recv queue, the
netlink_dump() will not been executed. So if netlink_dump() is failed
one time, the new data never appear and the reader will sleep forever.

netlink_dump() is called from two places:

1. from netlink_sendmsg->...->netlink_dump_start().
   In this place we can report error directly and it will be returned
   by sendmsg().

2. from netlink_recvmsg
   There we can't report error directly, because we have a portion of
   valid output data and call netlink_dump() for prepare the next portion.
   If netlink_dump() is failed, the socket will be mark as error and the
   next recvmsg will be failed.
Signed-off-by: NAndrey Vagin <avagin@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I just found that the controller hardware name is not set for the Softing
driver. After this patch, "$ ip -d link show" looks nicer.
Signed-off-by: NKurt Van Dijck <kurt.van.dijck@eia.be>
Acked-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The below patch changes a typo "pice" to "piece"
Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

fmvj18x_cs:add new id
           Toshiba lan&modem multifuction card (model name:IPC5010A)
Signed-off-by: NKen Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Today was as good as any other day, but I felt I had to do things I love
to when paying hommage to somebody I love, so please apply this one,
something he would be proud of, even if so geekly.

    Way past it was/is deserved.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

addr_type of 0 means that the type should be adopted from from_dev and
not from __hw_addr_del_multiple(). Unfortunately it isn't so and
addr_type will always be considered. Fix this by implementing the
considered and documented behavior.
Signed-off-by: NHagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Before this patch issuing these commands:

  fd = open("/proc/sys/net/ipv6/route/flush")
  unshare(CLONE_NEWNET)
  write(fd, "stuff")

would flush the newly created net, not the original one.

The equivalent ipv4 code is correct (stores the net inside ->extra1).
Acked-by: NDaniel Lezcano <daniel.lezcano@free.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The API for network devices has changed so that setting carrier off at
probe is no longer required.  This should fix the IPv6 addrconf issue.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=29612Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Reported-by: NGeorge Billios <gbillios@gmail.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The device is very similar to (0x0fe6, 0x8101),
And works well with dm9601 driver.
Signed-off-by: NShahar Havivi <shaharh@redhat.com>
Acked-by: NPeter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- fix the RTL8111DP turn off the power when DASH is enabled.
- RTL_GIGA_MAC_VER_27 must wait for tx finish before reset.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Acked-by: NFrancois Romieu <romieu@fr.zoreil.com>

Adjust and remove certain settings of RTL8102E which are for previous chips.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Acked-off-by: NFrancois Romieu <romieu@fr.zoreil.com>

It results in the wrong point address and influences RTL8168DP.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Acked-by: NFrancois Romieu <romieu@fr.zoreil.com>

DM9000 revision B needs 1 ms delay after PHY power-on.
PHY must be powered on by writing 0 into register DM9000_GPR before
all other settings will change (see Davicom spec and example code).

Remember, that register DM9000_GPR was not changed by reset sequence.

Without this fix the FIFO is out of sync and sends wrong data after
sequence of "ifconfig ethX down ; ifconfig ethX up".
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The spin_lock should hold before reading register.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

netem_skb_cb() does :

return (struct netem_skb_cb *)qdisc_skb_cb(skb)->data;

Unfortunatly struct qdisc_skb_cb data is not long word aligned, so
access to psched_time_t time_to_send uses a non aligned access.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/sfc/ethtool.c: In function ‘efx_ethtool_self_test’:
drivers/net/sfc/ethtool.c:613: warning: the frame size of 1200 bytes
is larger than 1024 bytes
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Acked-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently the bridge multicast snooping feature periodically issues
IPv6 general multicast listener queries to sense the absence of a
listener.

For this, it uses :: as its source address - however RFC 2710 requires:
"To be valid, the Query message MUST come from a link-local IPv6 Source
Address". Current Linux kernel versions seem to follow this requirement
and ignore our bogus MLD queries.

With this commit a link local address from the bridge interface is being
used to issue the MLD query, resulting in other Linux devices which are
multicast listeners in the network to respond with a MLD response (which
was not the case before).
Signed-off-by: NLinus Lüssing <linus.luessing@web.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Map the IPv6 header's destination multicast address to an ethernet
source address instead of the MLD queries multicast address.

For instance for a general MLD query (multicast address in the MLD query
set to ::), this would wrongly be mapped to 33:33:00:00:00:00, although
an MLD queries destination MAC should always be 33:33:00:00:00:01 which
matches the IPv6 header's multicast destination ff02::1.
Signed-off-by: NLinus Lüssing <linus.luessing@web.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently the multicast bridge snooping support is not active for
link local multicast. I assume this has been done to leave
important multicast data untouched, like IPv6 Neighborhood Discovery.

In larger, bridged, local networks it could however be desirable to
optimize for instance local multicast audio/video streaming too.

With the transient flag in IPv6 multicast addresses we have an easy
way to optimize such multimedia traffic without tempering with the
high priority multicast data from well-known addresses.

This patch alters the multicast bridge snooping for IPv6, to take
effect for transient multicast addresses instead of non-link-local
addresses.
Signed-off-by: NLinus Lüssing <linus.luessing@web.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This commit adds the missing IPv6 multicast address flag defines to
complement the already existing multicast address scope defines and to
be able to check these flags nicely in the future.
Signed-off-by: NLinus Lüssing <linus.luessing@web.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The nsrcs number is 2 Byte wide, therefore we need to call ntohs()
before using it.
Signed-off-by: NLinus Lüssing <linus.luessing@web.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We actually want a pointer to the grec_nsrcr and not the following
field. Otherwise we can get very high values for *nsrcs as the first two
bytes of the IPv6 multicast address are being used instead, leading to
a failing pskb_may_pull() which results in MLDv2 reports not being
parsed.
Signed-off-by: NLinus Lüssing <linus.luessing@web.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The protocol type for IPv6 entries in the hash table for multicast
bridge snooping is falsely set to ETH_P_IP, marking it as an IPv4
address, instead of setting it to ETH_P_IPV6, which results in negative
look-ups in the hash table later.
Signed-off-by: NLinus Lüssing <linus.luessing@web.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Documentation/DMA-API-HOWTO.txt states:

"DMA transfers need to be synced properly in order for
the cpu and device to see the most uptodate and correct
copy of the DMA buffer."

Cc: <stable@kernel.org>
Signed-off-by: NChristian Lamparter <chunkeey@googlemail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

I previously managed to reproduce a hang while scanning wireless
channels (reproducible with airodump-ng hopping channels); subsequent
lockdep instrumentation revealed a lock ordering issue.

Without knowing the design intent, it looks like the locks should be
taken in reverse order; please comment.

=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.38-rc5-341cd #4
-------------------------------------------------------
airodump-ng/15445 is trying to acquire lock:
 (&rdev->devlist_mtx){+.+.+.}, at: [<ffffffff816b1266>]
cfg80211_wext_siwfreq+0xc6/0x100

but task is already holding lock:
 (&wdev->mtx){+.+.+.}, at: [<ffffffff816b125c>] cfg80211_wext_siwfreq+0xbc/0x100

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&wdev->mtx){+.+.+.}:
       [<ffffffff810a79d6>] lock_acquire+0xc6/0x280
       [<ffffffff816d6bce>] mutex_lock_nested+0x6e/0x4b0
       [<ffffffff81696080>] cfg80211_netdev_notifier_call+0x430/0x5f0
       [<ffffffff8109351b>] notifier_call_chain+0x8b/0x100
       [<ffffffff810935b1>] raw_notifier_call_chain+0x11/0x20
       [<ffffffff81576d92>] call_netdevice_notifiers+0x32/0x60
       [<ffffffff815771a4>] __dev_notify_flags+0x34/0x80
       [<ffffffff81577230>] dev_change_flags+0x40/0x70
       [<ffffffff8158587c>] do_setlink+0x1fc/0x8d0
       [<ffffffff81586042>] rtnl_setlink+0xf2/0x140
       [<ffffffff81586923>] rtnetlink_rcv_msg+0x163/0x270
       [<ffffffff8159d741>] netlink_rcv_skb+0xa1/0xd0
       [<ffffffff815867b0>] rtnetlink_rcv+0x20/0x30
       [<ffffffff8159d39a>] netlink_unicast+0x2ba/0x300
       [<ffffffff8159dd57>] netlink_sendmsg+0x267/0x3e0
       [<ffffffff8155e364>] sock_sendmsg+0xe4/0x110
       [<ffffffff8155f3a3>] sys_sendmsg+0x253/0x3b0
       [<ffffffff81003192>] system_call_fastpath+0x16/0x1b

-> #0 (&rdev->devlist_mtx){+.+.+.}:
       [<ffffffff810a7222>] __lock_acquire+0x1622/0x1d10
       [<ffffffff810a79d6>] lock_acquire+0xc6/0x280
       [<ffffffff816d6bce>] mutex_lock_nested+0x6e/0x4b0
       [<ffffffff816b1266>] cfg80211_wext_siwfreq+0xc6/0x100
       [<ffffffff816b2fad>] ioctl_standard_call+0x5d/0xd0
       [<ffffffff816b3223>] T.808+0x163/0x170
       [<ffffffff816b326a>] wext_handle_ioctl+0x3a/0x90
       [<ffffffff815798d2>] dev_ioctl+0x6f2/0x830
       [<ffffffff8155cf3d>] sock_ioctl+0xfd/0x290
       [<ffffffff8117dffd>] do_vfs_ioctl+0x9d/0x590
       [<ffffffff8117e53a>] sys_ioctl+0x4a/0x80
       [<ffffffff81003192>] system_call_fastpath+0x16/0x1b

other info that might help us debug this:

2 locks held by airodump-ng/15445:
 #0:  (rtnl_mutex){+.+.+.}, at: [<ffffffff81586782>] rtnl_lock+0x12/0x20
 #1:  (&wdev->mtx){+.+.+.}, at: [<ffffffff816b125c>]
cfg80211_wext_siwfreq+0xbc/0x100

stack backtrace:
Pid: 15445, comm: airodump-ng Not tainted 2.6.38-rc5-341cd #4
Call Trace:
 [<ffffffff810a3f0a>] ? print_circular_bug+0xfa/0x100
 [<ffffffff810a7222>] ? __lock_acquire+0x1622/0x1d10
 [<ffffffff810a1f99>] ? trace_hardirqs_off_caller+0x29/0xc0
 [<ffffffff810a79d6>] ? lock_acquire+0xc6/0x280
 [<ffffffff816b1266>] ? cfg80211_wext_siwfreq+0xc6/0x100
 [<ffffffff810a31d7>] ? mark_held_locks+0x67/0x90
 [<ffffffff816d6bce>] ? mutex_lock_nested+0x6e/0x4b0
 [<ffffffff816b1266>] ? cfg80211_wext_siwfreq+0xc6/0x100
 [<ffffffff810a31d7>] ? mark_held_locks+0x67/0x90
 [<ffffffff816b1266>] ? cfg80211_wext_siwfreq+0xc6/0x100
 [<ffffffff816b1266>] ? cfg80211_wext_siwfreq+0xc6/0x100
 [<ffffffff816b2fad>] ? ioctl_standard_call+0x5d/0xd0
 [<ffffffff8157818b>] ? __dev_get_by_name+0x9b/0xc0
 [<ffffffff816b2f50>] ? ioctl_standard_call+0x0/0xd0
 [<ffffffff816b3223>] ? T.808+0x163/0x170
 [<ffffffff8112ddf2>] ? might_fault+0x72/0xd0
 [<ffffffff816b326a>] ? wext_handle_ioctl+0x3a/0x90
 [<ffffffff8112de3b>] ? might_fault+0xbb/0xd0
 [<ffffffff815798d2>] ? dev_ioctl+0x6f2/0x830
 [<ffffffff810a1bae>] ? put_lock_stats+0xe/0x40
 [<ffffffff810a1c8c>] ? lock_release_holdtime+0xac/0x150
 [<ffffffff8155cf3d>] ? sock_ioctl+0xfd/0x290
 [<ffffffff8117dffd>] ? do_vfs_ioctl+0x9d/0x590
 [<ffffffff8116c8ff>] ? fget_light+0x1df/0x3c0
 [<ffffffff8117e53a>] ? sys_ioctl+0x4a/0x80
 [<ffffffff81003192>] ? system_call_fastpath+0x16/0x1b
Signed-off-by: NDaniel J Blueman <daniel.blueman@gmail.com>
Acked-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

As reported and found by Johannes Stezenbach:
rt2800{pci,usb} do not report the Michael MIC in RXed frames, but do check
the Michael MIC in hardware. Therefore we have to report to mac80211 that the
received frame does not include the Michael MIC.

https://bugzilla.kernel.org/show_bug.cgi?id=16608Signed-off-by: NGertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Fast channel change fixes:

a) Always set OFDM timings
b) Don't re-activate PHY
c) Enable only NF calibration, not AGC

https://bugzilla.kernel.org/show_bug.cgi?id=27382Signed-off-by: NNick Kossifidis <mickflemm@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Fix a bug that undo_retrans is incorrectly decremented when undo_marker is
not set or undo_retrans is already 0. This happens when sender receives
more DSACK ACKs than packets retransmitted during the current
undo phase. This may also happen when sender receives DSACK after
the undo operation is completed or cancelled.

Fix another bug that undo_retrans is incorrectly incremented when
sender retransmits an skb and tcp_skb_pcount(skb) > 1 (TSO). This case
is rare but not impossible.
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Acked-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>