- 07 3月, 2015 36 次提交
-
-
由 Leilei Zhao 提交于
The property in device tree will be reading each time when tty is opened, so the ops of serial port should be set after that instead of setting once in probe. Otherwise, the ops of serial port is inconsistent with the state of serial work manner. For example, the atmel serial driver can't work when switching to PIO mode due to DMA channel is not available. Signed-off-by: NLeilei Zhao <leilei.zhao@atmel.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Leilei Zhao 提交于
The function of atmel_init_property is to set the work manner of atmel serial ports according to the property in device trees. If DMA or PDC is not set or something goes wrong in getting property, the work manner will switch to general PIO mode, thus there will not be any failure case in this function. It's actually a procedure. So changing the return type from int to void. Signed-off-by: NLeilei Zhao <leilei.zhao@atmel.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Leilei Zhao 提交于
The buffer size set in DMA is inconsistent with its allocation. So keep them consistent here. The structure atmel_uart_char is used in PIO mode with its meaning. But here in DMA, all of the buffer is treated as general char. Signed-off-by: NLeilei Zhao <leilei.zhao@atmel.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Leilei Zhao 提交于
We only use buf of ring In DMA rx function while using buf of xmit in DMA tx function. So in DMA rx we need definitively to check the buf of ring which is corresponding to DMA rx function. And use macro PAGE_ALIGNED to simplify the expression. Signed-off-by: NLeilei Zhao <leilei.zhao@atmel.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jorge Ramirez-Ortiz 提交于
Fix a race condition that happens when device_initcall(pl011_dma_initicall) is executed before all the devices have been probed - this issue was observed on a hisi_6220 SoC (HiKey board from Linaro). The deferred driver probing framework relies on late_initcall to trigger deferred probes so it is just possible that, even with a valid DMA driver ready to be loaded, we fail to synchronize with it. The proposed implementation delays probing the DMA until dma_startup. As this is invoked on port startup and port resume - but DMA probing is only required once - we avoid calling multiple times using a new field in uart_amba_port to track this scenario. This commit allows for subsequent attempts to associate an external DMA if the DMA driver itself is not available (but present in the deferred probe pending list). Signed-off-by: NJorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Reviewed-by: NRob Herring <robh@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Dave Martin 提交于
Getting the TX IRQ re-asserted from scratch can be inefficient in some setups. This patch avoids clearing the TX IRQ across pl011_shutdown()... pl011_startup(), so that if the port is closed and reopened, the IRQ will still work afterwards without having to bootstrap it again. The TX IRQ continues to be masked in IMSC when the UART is not in use. Signed-off-by: NDave Martin <Dave.Martin@arm.com> Tested-by: NAndre Przywara <andre.przywara@arm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Dave Martin 提交于
The current PL011 driver transmits a dummy character when the UART is opened, to assert the TX IRQ for the first time (see pl011_startup()). The UART is put in loopback mode temporarily, so the receiver presumably shouldn't see anything. However... At least some platforms containing a PL011 send characters down the wire even when loopback mode is enabled. This means that a spurious NUL character may be seen at the receiver when the PL011 is opened through the TTY layer. The current code also temporarily sets the baud rate to maximum and the character width to the minimum, to that the dummy TX completes as quickly as possible. If this is seen by the receiver it will result in a framing error and can knock the receiver out of sync -- turning subsequent output into garbage until synchronisation is reestablished. (Particularly problematic during boot with systemd.) To avoid spurious transmissions, this patch removes assumptions about whether the TX IRQ will fire until at least one TX IRQ has been seen. Instead, the UART will unmask the TX IRQ and then slow-start via polling and timer-based soft IRQs initially. If the TTY layer writes enough data to fill the FIFO to the interrupt threshold in one go, the TX IRQ should assert, at which point the driver changes to fully interrupt-driven TX. In this way, the TX IRQ is activated as a side-effect instead of being done deliberately. This should also mean that the driver works on the SBSA Generic UART[1] (a cut-down PL011) without invasive changes. The Generic UART lacks some features needed for the dummy TX approach to work (FIFO disabling and loopback). [1] Server Base System Architecture (ARM-DEN-0029-v2.3) http://infocenter.arm.com/ (click-thru required :/) Signed-off-by: NDave Martin <Dave.Martin@arm.com> Tested-by: NAndre Przywara <andre.przywara@arm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Peter Crosthwaite 提交于
All instances of "ttyPS" use this macro except for this one. Convert it. Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com> Acked-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Peter Hurley 提交于
The Spreadtrum UART is accessed with mmio; declare the proper iotype. Also prevent userspace from assigning any other iotype via ioctl(TIOCSSERIAL). Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Uwe Kleine-König 提交于
The transmitter is expected to be controlled by the UART's RTS pin. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Uwe Kleine-König 提交于
Support for IRDA was added in 2009 in commit v2.6.31-rc1~399^2~2. There are no in-tree users. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Uwe Kleine-König 提交于
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Uwe Kleine-König 提交于
Fix indention, remove old address of the FSF, remove in-file changelog, mention Freescale. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Uwe Kleine-König 提交于
There is no benefit in keeping this information in RAM when it's not used any more, so better use function local variables instead. These members are unused since c0d1c6b0 ("serial: imx: Fix the reporting of interrupts") Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Uwe Kleine-König 提交于
This if (0) exists since the driver was introduced in commit c49bde83eb6a ([ARM PATCH] 1956/2: Re: Motorola i.MX serial driver) back in 2004. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Uwe Kleine-König 提交于
The writeable bits in the USR2 register are all "write 1 to clear" so only write the bits that actually should be cleared. Fixes: f1f836e4 ("serial: imx: Add Rx Fifo overrun error message") Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Andy Shevchenko 提交于
Since we have a native 8250 driver carrying the Intel MID serial devices the specific support is not needed anymore. This patch removes it for Intel MID. Note that the console device name is changed from ttyMFDx to ttySx. Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: NIngo Molnar <mingo@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Andy Shevchenko 提交于
Intel Penwell supports 3 HSUART ports which are 8250 compatible. The patch adds necessary bits to the driver. The functions have intel_mid_* prefix due to more than one platform will use this code. Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Joseph Kogut 提交于
Fixed misspelling of 'Medfield' Signed-off-by: NJoseph Kogut <joseph.kogut@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Axel Lin 提交于
Current code uses the alias id as array subscript of ar933x_console_ports. So the valid id is 0 ... CONFIG_SERIAL_AR933X_NR_UARTS - 1. Signed-off-by: NAxel Lin <axel.lin@ingics.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Uwe Kleine-König 提交于
Instead of ignoring errors returned by devm_gpiod_get_index use devm_gpiod_get_index_optional which results in slightly more strict error handling which is good. Also use the fourth parameter to devm_gpiod_get_index_optional to be able to drop the explicit direction setting. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Uwe Kleine-König 提交于
Drivers using mctrl-gpio must not pass invalid values for struct mctrl_gpios *. All drivers were fixed in this regard and so some checks can go away or be simplified. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Uwe Kleine-König 提交于
If mctrl_gpio_init returns an error code this value should be forwarded and the driver must not simply ignore this failure. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Uwe Kleine-König 提交于
mctrl_gpio_init is fully aware of being optional. If it returns an error code this indicates a real error that must not be ignored. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Uwe Kleine-König 提交于
mctrl_gpio_init at present doesn't return NULL. (It might be used in the future when no gpios are to be used indicating success.) Properly pass error returned and also make driver probing fail on error. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Nicholas Mc Guire 提交于
This is only an API consolidation and should make things more readable it replaces var * HZ / 1000 by msecs_to_jiffies(var). Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Fabio Estevam 提交于
UBRC is a read-only register, so we should not store and restore it inside imx_flush_buffer(). Reported-by: NFugang Duan <B38611@freescale.com> Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Acked-by: NFugang Duan <B38611@freescale.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Lad, Prabhakar 提交于
this patch fixes following sparse warnings: bcm63xx_uart.c:857:43: warning: Using plain integer as NULL pointer bcm63xx_uart.c:871:35: warning: Using plain integer as NULL pointer Signed-off-by: NLad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Mika Westerberg 提交于
Without this the module does not load automatically whenever suitable platform device appears. Reported-by: NJerome Blin <jerome.blin@intel.com> Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Paul Bolle 提交于
Building sprd_serial.o when CONFIG_PM_SLEEP is not defined triggers these warnings: drivers/tty/serial/sprd_serial.c:755:12: warning: ‘sprd_suspend’ defined but not used [-Wunused-function] static int sprd_suspend(struct device *dev) ^ drivers/tty/serial/sprd_serial.c:764:12: warning: ‘sprd_resume’ defined but not used [-Wunused-function] static int sprd_resume(struct device *dev) ^ Let's compile these functions only when CONFIG_PM_SLEEP is defined. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Sanjeev Sharma 提交于
Make of_device_id array const. Signed-off-by: NSanjeev Sharma <Sanjeev_Sharma@mentor.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Michal Simek 提交于
No functional changes. Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Andy Shevchenko 提交于
Convert the legacy system PM callbacks to new ones. Meanwhile, remove the redudant calls to the PCI for changing a power state since it's done by bus code. Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Kevin Hao 提交于
In the current kernel, the CONFIG_PPC_OF is always 'y' for the ppc arch. So we don't need to check it with other ppc specific options. Signed-off-by: NKevin Hao <haokexin@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Fabian Frederick 提交于
Use helper functions to access current->state. Direct assignments are prone to races and therefore buggy. Thanks to Peter Zijlstra for the exact definition of the problem. Suggested-By: NPeter Zijlstra <peterz@infradead.org> Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Arnd Bergmann 提交于
As more ARM platforms are moving into ARCH_MULTIPLATFORM, we can now have integrator and versatile in the same kernel, and first one selects this driver, causing a Kconfig warning: warning: (ARCH_INTEGRATOR_AP) selects SERIAL_AMBA_PL010 which has unmet direct dependencies (TTY && HAS_IOMEM && ARM_AMBA && (BROKEN || !ARCH_VERSATILE)) It turns out that it has not been broken on versatile for a long time, so we can remove the statement here. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 12 2月, 2015 2 次提交
-
-
由 Michal Hocko 提交于
Commit 5695be14 ("OOM, PM: OOM killed task shouldn't escape PM suspend") has left a race window when OOM killer manages to note_oom_kill after freeze_processes checks the counter. The race window is quite small and really unlikely and partial solution deemed sufficient at the time of submission. Tejun wasn't happy about this partial solution though and insisted on a full solution. That requires the full OOM and freezer's task freezing exclusion, though. This is done by this patch which introduces oom_sem RW lock and turns oom_killer_disable() into a full OOM barrier. oom_killer_disabled check is moved from the allocation path to the OOM level and we take oom_sem for reading for both the check and the whole OOM invocation. oom_killer_disable() takes oom_sem for writing so it waits for all currently running OOM killer invocations. Then it disable all the further OOMs by setting oom_killer_disabled and checks for any oom victims. Victims are counted via mark_tsk_oom_victim resp. unmark_oom_victim. The last victim wakes up all waiters enqueued by oom_killer_disable(). Therefore this function acts as the full OOM barrier. The page fault path is covered now as well although it was assumed to be safe before. As per Tejun, "We used to have freezing points deep in file system code which may be reacheable from page fault." so it would be better and more robust to not rely on freezing points here. Same applies to the memcg OOM killer. out_of_memory tells the caller whether the OOM was allowed to trigger and the callers are supposed to handle the situation. The page allocation path simply fails the allocation same as before. The page fault path will retry the fault (more on that later) and Sysrq OOM trigger will simply complain to the log. Normally there wouldn't be any unfrozen user tasks after try_to_freeze_tasks so the function will not block. But if there was an OOM killer racing with try_to_freeze_tasks and the OOM victim didn't finish yet then we have to wait for it. This should complete in a finite time, though, because - the victim cannot loop in the page fault handler (it would die on the way out from the exception) - it cannot loop in the page allocator because all the further allocation would fail and __GFP_NOFAIL allocations are not acceptable at this stage - it shouldn't be blocked on any locks held by frozen tasks (try_to_freeze expects lockless context) and kernel threads and work queues are not frozen yet Signed-off-by: NMichal Hocko <mhocko@suse.cz> Suggested-by: NTejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
While touching this area let's convert printk to pr_*. This also makes the printing of continuation lines done properly. Signed-off-by: NMichal Hocko <mhocko@suse.cz> Acked-by: NTejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 2月, 2015 2 次提交
-
-
由 Peter Hurley 提交于
UARTs which do not trigger THRE interrupt if the fifo is already empty when the interrupt is enabled need tx primed manually. These UARTs are identified by the UART_BUG_TXEN flag to enable the required workaround. However, the current workaround is broken; if the fifo is already empty but the shifter is still transmitting, then serial8250_tx_chars() will not be called but no further THRE interrupt will occur, and tx will stall. The appropriate check is for fifo empty (THRE), not transmitter empty (TEMT). Signed-off-by: NDick Hollenbeck <dick@softplc.com> [pjh: rewrote commit log] Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Niklas Cassel 提交于
This is the last missing piece to get a kernel booting to a prompt in qemu-cris. Signed-off-by: NNiklas Cassel <nks@flawful.org> Acked-by: NJesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-