Since we'd like to allow the guest to own a few bits of cr0 at times, we need
to know when we access those bits.
Signed-off-by: NAvi Kivity <avi@redhat.com>

clts writes cr0.ts; lmsw writes cr0[0:15] - record that in ftrace.
Signed-off-by: NAvi Kivity <avi@redhat.com>

An SLB entry contains two pieces of information related to size:

  1) PTE size
  2) SLB size

The L bit defines the PTE be "large" (usually means 16MB),
SLB_VSID_B_1T defines that the SLB should span 1 GB instead of the
default 256MB.

Apparently I messed things up and just put those two in one box,
shaked it heavily and came up with the current code which handles
large pages incorrectly, because it also treats large page SLB entries
as "1TB" segment entries.

This patch splits those two features apart, making Linux guests boot
even when they have > 256MB.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

When we get a program interrupt in guest kernel mode, we try to emulate the
instruction.

If that doesn't fail, we report to the user and try again - at the exact same
instruction pointer. So if the guest kernel really does trigger an invalid
instruction, we loop forever.

So let's better go and forward program exceptions to the guest when we don't
know the instruction we're supposed to emulate.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

When we need to reinject a program interrupt into the guest, we also need to
reinject the corresponding flags into the guest.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Reported-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The code to unset HID5.dcbz32 is broken.
This patch makes it do the right rotate magic.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Reported-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Book3S needs some flags in SRR1 to get to know details about an interrupt.

One such example is the trap instruction. It tells the guest kernel that
a program interrupt is due to a trap using a bit in SRR1.

This patch implements above behavior, making WARN_ON behave like WARN_ON.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Currently we're racy when doing the transition from IR=1 to IR=0, from
the module memory entry code to the real mode SLB switching code.

To work around that I took a look at the RTAS entry code which is faced
with a similar problem and did the same thing:

  A small helper in linear mapped memory that does mtmsr with IR=0 and
  then RFIs info the actual handler.

Thanks to that trick we can safely take page faults in the entry code
and only need to be really wary of what to do as of the SLB switching
part.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Using an RFI in IR=1 is dangerous. We need to set two SRRs and then do an RFI
without getting interrupted at all, because every interrupt could potentially
overwrite the SRR values.

Fortunately, we don't need to RFI in at least this particular case of the code,
so we can just replace it with an mtmsr and b.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

To fetch the last instruction we were interrupted on, we enable DR in early
exit code, where we are still in a very transitional phase between guest
and host state.

Most of the time this seemed to work, but another CPU can easily flush our
TLB and HTAB which makes us go in the Linux page fault handler which totally
breaks because we still use the guest's SLB entries.

To work around that, let's introduce a second KVM guest mode that defines
that whenever we get a trap, we don't call the Linux handler or go into
the KVM exit code, but just jump over the faulting instruction.

That way a potentially bad lwz doesn't trigger any faults and we can later
on interpret the invalid instruction we fetched as "fetch didn't work".
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

We're being horribly racy right now. All the entry and exit code hijacks
random fields from the PACA that could easily be used by different code in
case we get interrupted, for example by a #MC or even page fault.

After discussing this with Ben, we figured it's best to reserve some more
space in the PACA and just shove off some vcpu state to there.

That way we can drastically improve the readability of the code, make it
less racy and less complex.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

We now have helpers for the GPRs, so let's also add some for CR and XER.

Having them in the PACA simplifies code a lot, as we don't need to care
about where to store CC or not to overflow any integers.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

All code in PPC KVM currently accesses gprs in the vcpu struct directly.

While there's nothing wrong with that wrt the current way gprs are stored
and loaded, it doesn't suffice for the PACA acceleration that will follow
in this patchset.

So let's just create little wrapper inline functions that we call whenever
a GPR needs to be read from or written to. The compiled code shouldn't really
change at all for now.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The explanation of write_emulated is confused with
that of read_emulated. This patch fix it.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Then the callback can provide the maximum supported large page level, which
is more flexible.

Also move the gb page support into x86_64 specific.
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

We can use them in x86.c and vmx.c now...
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

The PowerPC C ABI defines that registers r14-r31 need to be preserved across
function calls. Since our exit handler is written in C, we can make use of that
and don't need to reload r14-r31 on every entry/exit cycle.

This technique is also used in the BookE code and is called "lightweight exits"
there. To follow the tradition, it's called the same in Book3S.

So far this optimization was disabled though, as the code didn't do what it was
expected to do, but failed to work.

This patch fixes and enables lightweight exits again.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

When we're loading bolted entries into the SLB again, we're checking if an
entry is in use and only slbmte it when it is.

Unfortunately, the check always goes to the skip label of the first entry,
resulting in an endless loop when it actually gets triggered.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Some exit reasons missed their strings; fill out the table.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

With slots_lock converted to rcu, the entire kvm hotpath on modern processors
(with npt or ept) now scales beautifully.  Increase the maximum vcpu count to
64 to reflect this.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Using a similar two-step procedure as for memslots.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Use two steps for memslot deletion: mark the slot invalid (which stops
instantiation of new shadow pages for that slot, but allows destruction),
then instantiate the new empty slot.

Also simplifies kvm_handle_hva locking.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Required for SRCU convertion later.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Have a pointer to an allocated region inside x86's kvm_arch.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Have a pointer to an allocated region inside struct kvm.

[alex: fix ppc book 3s]
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Because we now emulate the DEC interrupt according to real life behavior,
there's no need to keep the AGGRESSIVE_DEC hack around.

Let's just remove it.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Acked-by: NAcked-by: Hollis Blanchard <hollis@penguinppc.org>
Signed-off-by: NAvi Kivity <avi@redhat.com>

We treated the DEC interrupt like an edge based one. This is not true for
Book3s. The DEC keeps firing until mtdec is issued again and thus clears
the interrupt line.

So let's implement this logic in KVM too. This patch moves the line clearing
from the firing of the interrupt to the mtdec emulation.

This makes PPC64 guests work without AGGRESSIVE_DEC defined.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Acked-by: NAcked-by: Hollis Blanchard <hollis@penguinppc.org>
Signed-off-by: NAvi Kivity <avi@redhat.com>

We're using a switch table to find the irqprio that belongs to a specific
interrupt vector. This table is part of the interrupt inject logic.

Since we'll add a new function to stop interrupts, let's move this table
out of the injection logic into a separate function.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Acked-by: NAcked-by: Hollis Blanchard <hollis@penguinppc.org>
Signed-off-by: NAvi Kivity <avi@redhat.com>

s390 doesn't have mmio, this will simplify ifdefing it out.
Signed-off-by: NAvi Kivity <avi@redhat.com>

The tsc_offset adjustment in svm_vcpu_load is executed
unconditionally even if Linux considers the host tsc as
stable. This causes a Linux guest detecting an unstable tsc
in any case.
This patch removes the tsc_offset adjustment if the host tsc
is stable. The guest will now get the benefit of a stable
tsc too.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Before enabling, execution of "rdtscp" in guest would result in #UD.
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Sometime, we need to adjust some state in order to reflect guest CPUID
setting, e.g. if we don't expose rdtscp to guest, we won't want to enable
it on hardware. cpuid_update() is introduced for this purpose.

Also export kvm_find_cpuid_entry() for later use.
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

KVM need vsyscall_init() to initialize MSR_TSC_AUX before it read the value.
Per Avi's suggestion, this patch raised vsyscall priority on hotplug notifier
chain, to 30.

CC: Ingo Molnar <mingo@elte.hu>
CC: linux-kernel@vger.kernel.org
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

shared_msr_global saved host value of relevant MSRs, but it have an
assumption that all MSRs it tracked shared the value across the different
CPUs. It's not true with some MSRs, e.g. MSR_TSC_AUX.

Extend it to per CPU to provide the support of MSR_TSC_AUX, and more
alike MSRs.

Notice now the shared_msr_global still have one assumption: it can only deal
with the MSRs that won't change in host after KVM module loaded.
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

It's no longer necessary.
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>