- 13 2月, 2010 1 次提交
-
-
由 Jiri Pirko 提交于
This patch replaces dev->mc_count in all drivers (hopefully I didn't miss anything). Used spatch and did small tweaks and conding style changes when it was suitable. Jirka Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 2月, 2010 1 次提交
-
-
由 Roland Dreier 提交于
Initialize the .cmd member of various ethtool using a designated struct initializer rather. This makes things a teeny bit more robust, although the chance of a struct layout changing is extremely remote, and also makes the code a little easier to read. Signed-off-by: NRoland Dreier <rolandd@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 2月, 2010 22 次提交
-
-
由 Peter Waskiewicz 提交于
Driver has gone under significant changes, the version should reflect that. Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Waskiewicz 提交于
This patch adds n-tuple filter programming to 82599. Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter P Waskiewicz Jr 提交于
This patchset enables the ethtool layer to program n-tuple filters to an underlying device. The idea is to allow capable hardware to have static rules applied that can assist steering flows into appropriate queues. Hardware that is known to support these types of filters today are ixgbe and niu. Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Break the largish case for handling receive checksum into a separate function, and if there is a problem use dev_XXX routines to show which hardware is the problem. Turn one corner case into a BUG(). This only happens if the driver is expecting one behavior but the chip does the old behavior; only ever saw this when bringing up a new chip type and driver was buggy. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Clone of vendor code to disable ASF on Extreme and Supreme chips. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Change the resume path to use pci write config for a couple of reasons: 1. pci_write_config_dword() allows for more error checking of PCI health after resume. 2. better to toggle this register on all chip types, since that is what vendor driver does. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kucheria 提交于
i.MX51 babbage board has a FEC ethernet controller Signed-off-by: NAmit Kucheria <amit.kucheria@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kucheria 提交于
The i.MX51 babbage board has a FEC ethernet controller with this phy. In the long term we should resurrect the phylib patches for fec. Signed-off-by: NAmit Kucheria <amit.kucheria@canonical.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rob Herring 提交于
The fec driver was enabling receive buffer descriptor without allocating the buffers. Make sure the buffer descriptors are initialized to not start receiving packets. Open also calls fec_restart after the rx buffers are allocated. With the code in fec_restart, it zeroes out the buffer descriptors that have just been setup. Signed-off-by: NRob Herring <r.herring@freescale.com> Signed-off-by: NAmit Kucheria <amit.kucheria@canonical.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Li Zefan 提交于
Simplify seq_file code. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Li Zefan 提交于
Simplify seq_file code. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Li Zefan 提交于
Simplify seq_file code. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Li Zefan 提交于
Simplify seq_file code. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Li Zefan 提交于
Simplify seq_file code. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Li Zefan 提交于
Simplify seq_file code. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Li Zefan 提交于
Simplify seq_file code. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Li Zefan 提交于
Simplify seq_file code. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Li Zefan 提交于
Simplify seq_file code. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Li Zefan 提交于
Simplify seq_file code. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Li Zefan 提交于
Simplify seq_file code. Signed-off-by: NLi Zefan <lizf@cn.fujtisu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Li Zefan 提交于
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Li Zefan 提交于
Some places in kernel need to iterate over a hlist in seq_file, so provide some common helpers. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 2月, 2010 1 次提交
-
-
由 David S. Miller 提交于
-
- 09 2月, 2010 11 次提交
-
-
由 Julia Lawall 提交于
Test the value that was just allocated rather than the previously tested one. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ expression *x; expression e; identifier l; @@ if (x == NULL || ...) { ... when forall return ...; } ... when != goto l; when != x = e when != &x *x == NULL // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
During the rc period, patches that are not bugfixes should be done using the net-next tree. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Luebbe 提交于
The action modules have been prefixed with 'act_', but the Kconfig description was not changed. Signed-off-by: NJan Luebbe <jluebbe@debian.org> Acked-by: NJamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Divy Le Ray 提交于
Verify the HW checksum state for frames handed to GRO processing. Signed-off-by: NDivy Le Ray <divy@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Kernel bugzilla #15239 On some workloads, it is quite possible to get a huge dst list to process in dst_gc_task(), and trigger soft lockup detection. Fix is to call cond_resched(), as we run in process context. Reported-by: NPawel Staszewski <pstaszewski@itcare.pl> Tested-by: NPawel Staszewski <pstaszewski@itcare.pl> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
As noticed by Jon Masters <jonathan@jonmasters.org>, the conntrack hash size is global and not per namespace, but modifiable at runtime through /sys/module/nf_conntrack/hashsize. Changing the hash size will only resize the hash in the current namespace however, so other namespaces will use an invalid hash size. This can cause crashes when enlarging the hashsize, or false negative lookups when shrinking it. Move the hash size into the per-namespace data and only use the global hash size to initialize the per-namespace value when instanciating a new namespace. Additionally restrict hash resizing to init_net for now as other namespaces are not handled currently. Cc: stable@kernel.org Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
As per C99 6.2.4(2) when temporary table data goes out of scope, the behaviour is undefined: if (compat) { struct foo tmp; ... private = &tmp; } [dereference private] Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: stable@kernel.org Signed-off-by: NPatrick McHardy <kaber@trash.net>
-
由 Alexey Dobriyan 提交于
Expectation hashtable size was simply glued to a variable with no code to rehash expectations, so it was a bug to allow writing to it. Make "expect_hashsize" readonly. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: stable@kernel.org Signed-off-by: NPatrick McHardy <kaber@trash.net>
-
由 Eric Dumazet 提交于
nf_conntrack_cachep is currently shared by all netns instances, but because of SLAB_DESTROY_BY_RCU special semantics, this is wrong. If we use a shared slab cache, one object can instantly flight between one hash table (netns ONE) to another one (netns TWO), and concurrent reader (doing a lookup in netns ONE, 'finding' an object of netns TWO) can be fooled without notice, because no RCU grace period has to be observed between object freeing and its reuse. We dont have this problem with UDP/TCP slab caches because TCP/UDP hashtables are global to the machine (and each object has a pointer to its netns). If we use per netns conntrack hash tables, we also *must* use per netns conntrack slab caches, to guarantee an object can not escape from one namespace to another one. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> [Patrick: added unique slab name allocation] Cc: stable@kernel.org Signed-off-by: NPatrick McHardy <kaber@trash.net>
-
由 Patrick McHardy 提交于
As discovered by Jon Masters <jonathan@jonmasters.org>, the "untracked" conntrack, which is located in the data section, might be accidentally freed when a new namespace is instantiated while the untracked conntrack is attached to a skb because the reference count it re-initialized. The best fix would be to use a seperate untracked conntrack per namespace since it includes a namespace pointer. Unfortunately this is not possible without larger changes since the namespace is not easily available everywhere we need it. For now move the untracked conntrack initialization to the init_net setup function to make sure the reference count is not re-initialized and handle cleanup in the init_net cleanup function to make sure namespaces can exit properly while the untracked conntrack is in use in other namespaces. Cc: stable@kernel.org Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
- 06 2月, 2010 4 次提交
-
-
由 David S. Miller 提交于
Early on this was an experimental facility that few people other than Alexey Kuznetsov played with. Now it's a pretty fundamental thing and as people add more features to AF_PACKET sockets this config options creates ifdef spaghetti. So kill it off. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Poole 提交于
The report descriptor is read by user space (via the Service Discovery Protocol), so it is only available during the ioctl to connect. However, the HID probe function that needs the descriptor might not be called until a specific module is loaded. Keep a copy of the descriptor so it is available for later use. Signed-off-by: NMichael Poole <mdpoole@troilus.org> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Jiri Pirko 提交于
Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-