New VTI tunnel kernel module, Kconfig and Makefile changes.
Signed-off-by: NSaurabh Mohan <saurabh.mohan@vyatta.com>
Reviewed-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch introduces memory pressure controls for the tcp
protocol. It uses the generic socket memory pressure code
introduced in earlier patches, and fills in the
necessary data in cg_proto struct.
Signed-off-by: NGlauber Costa <glommer@parallels.com>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujtisu.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Copy-s/tcp/udp/-paste from TCP bits.
Signed-off-by: NPavel Emelyanov <xemul@parallels.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds IPPROTO_ICMP socket kind.  It makes it possible to send
ICMP_ECHO messages and receive the corresponding ICMP_ECHOREPLY messages
without any special privileges.  In other words, the patch makes it
possible to implement setuid-less and CAP_NET_RAW-less /bin/ping.  In
order not to increase the kernel's attack surface, the new functionality
is disabled by default, but is enabled at bootup by supporting Linux
distributions, optionally with restriction to a group or a group range
(see below).

Similar functionality is implemented in Mac OS X:
http://www.manpagez.com/man/4/icmp/

A new ping socket is created with

    socket(PF_INET, SOCK_DGRAM, PROT_ICMP)

Message identifiers (octets 4-5 of ICMP header) are interpreted as local
ports. Addresses are stored in struct sockaddr_in. No port numbers are
reserved for privileged processes, port 0 is reserved for API ("let the
kernel pick a free number"). There is no notion of remote ports, remote
port numbers provided by the user (e.g. in connect()) are ignored.

Data sent and received include ICMP headers. This is deliberate to:
1) Avoid the need to transport headers values like sequence numbers by
other means.
2) Make it easier to port existing programs using raw sockets.

ICMP headers given to send() are checked and sanitized. The type must be
ICMP_ECHO and the code must be zero (future extensions might relax this,
see below). The id is set to the number (local port) of the socket, the
checksum is always recomputed.

ICMP reply packets received from the network are demultiplexed according
to their id's, and are returned by recv() without any modifications.
IP header information and ICMP errors of those packets may be obtained
via ancillary data (IP_RECVTTL, IP_RETOPTS, and IP_RECVERR). ICMP source
quenches and redirects are reported as fake errors via the error queue
(IP_RECVERR); the next hop address for redirects is saved to ee_info (in
network order).

socket(2) is restricted to the group range specified in
"/proc/sys/net/ipv4/ping_group_range".  It is "1 0" by default, meaning
that nobody (not even root) may create ping sockets.  Setting it to "100
100" would grant permissions to the single group (to either make
/sbin/ping g+s and owned by this group or to grant permissions to the
"netadmins" group), "0 4294967295" would enable it for the world, "100
4294967295" would enable it for the users, but not daemons.

The existing code might be (in the unlikely case anyone needs it)
extended rather easily to handle other similar pairs of ICMP messages
(Timestamp/Reply, Information Request/Reply, Address Mask Request/Reply
etc.).

Userspace ping util & patch for it:
http://openwall.info/wiki/people/segoon/ping

For Openwall GNU/*/Linux it was the last step on the road to the
setuid-less distro.  A revision of this patch (for RHEL5/OpenVZ kernels)
is in use in Owl-current, such as in the 2011/03/12 LiveCD ISOs:
http://mirrors.kernel.org/openwall/Owl/current/iso/

Initially this functionality was written by Pavel Kankovsky for
Linux 2.4.32, but unfortunately it was never made public.

All ping options (-b, -p, -Q, -R, -s, -t, -T, -M, -I), are tested with
the patch.

PATCH v3:
    - switched to flowi4.
    - minor changes to be consistent with raw sockets code.

PATCH v2:
    - changed ping_debug() to pr_debug().
    - removed CONFIG_IP_PING.
    - removed ping_seq_fops.owner field (unused for procfs).
    - switched to proc_net_fops_create().
    - switched to %pK in seq_printf().

PATCH v1:
    - fixed checksumming bug.
    - CAP_NET_RAW may not create icmp sockets anymore.

RFC v2:
    - minor cleanups.
    - introduced sysctl'able group range to restrict socket(2).
Signed-off-by: NVasiliy Kulikov <segoon@openwall.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The time has finally come to remove the hash based routing table
implementation in ipv4.

FIB Trie is mature, well tested, and I've done an audit of it's code
to confirm that it implements insert, delete, and lookup with the same
identical semantics as fib_hash did.

If there are any semantic differences found in fib_trie, we should
simply fix them.

I've placed the trie statistic config option under advanced router
configuration.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NStephen Hemminger <shemminger@vyatta.com>

PPP: introduce "pptp" module which implements point-to-point tunneling protocol using pppox framework
NET: introduce the "gre" module for demultiplexing GRE packets on version criteria
     (required to pptp and ip_gre may coexists)
NET: ip_gre: update to use the "gre" module

This patch introduces then pptp support to the linux kernel which
dramatically speeds up pptp vpn connections and decreases cpu usage in
comparison of existing user-space implementation
(poptop/pptpclient). There is accel-pptp project
(https://sourceforge.net/projects/accel-pptp/) to utilize this module,
it contains plugin for pppd to use pptp in client-mode and modified
pptpd (poptop) to build high-performance pptp NAS.

There was many changes from initial submitted patch, most important are:
1. using rcu instead of read-write locks
2. using static bitmap instead of dynamically allocated
3. using vmalloc for memory allocation instead of BITS_PER_LONG + __get_free_pages
4. fixed many coding style issues
Thanks to Eric Dumazet.
Signed-off-by: NDmitry Kozlov <xeb@mail.ru>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since IPVS now has partial IPv6 support, this patch moves IPVS from
net/ipv4/ipvs to net/netfilter/ipvs. It's a result of:

$ git mv net/ipv4/ipvs net/netfilter

and adapting the relevant Kconfigs/Makefiles to the new path.
Signed-off-by: NJulius Volz <juliusv@google.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>

This reverts commit db1ed684 ("[IPV6]
UDP: Rename IPv6 UDP files."), commit
8be8af8f ("[IPV4] UDP: Move
IPv4-specific bits to other file.") and commit
e898d4db ("[UDP]: Allow users to
configure UDP-Lite.").

First, udplite is of such small cost, and it is a core protocol just
like TCP and normal UDP are.

We spent enormous amounts of effort to make udplite share as much code
with core UDP as possible.  All of that work is less valuable if we're
just going to slap a config option on udplite support.

It is also causing build failures, as reported on linux-next, showing
that the changeset was not tested very well.  In fact, this is the
second build failure resulting from the udplite change.

Finally, the config options provided was a bool, instead of a modular
option.  Meaning the udplite code does not even get build tested
by allmodconfig builds, and furthermore the user is not presented
with a reasonable modular build option which is particularly needed
by distribution vendors.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move IPv4-specific UDP bits from net/ipv4/udp.c into (new) net/ipv4/udp_ipv4.c.
Rename net/ipv4/udplite.c to net/ipv4/udplite_ipv4.c.
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

Let's give users an option for disabling UDP-Lite (~4K).

old:
|    text	   data	    bss	    dec	    hex	filename
|  286498	  12432	   6072	 305002	  4a76a	net/ipv4/built-in.o
|  193830	   8192	   3204	 205226	  321aa	net/ipv6/ipv6.o

new (without UDP-Lite):
|    text	   data	    bss	    dec	    hex	filename
|  284086	  12136	   5432	 301654	  49a56	net/ipv4/built-in.o
|  191835	   7832	   3076	 202743	  317f7	net/ipv6/ipv6.o
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

This includes several cleanups:

 * tune Makefile to compile out this file when SYSCTL=n. Now
   it looks like net/core/sysctl_net_core.c one;
 * move the ipv4_config to af_inet.c to exist all the time;
 * remove additional sysctl_ip_nonlocal_bind declaration
   (it is already declared in net/ip.h);
 * remove no nonger needed ifdefs from this file.

This is a preparation for using ctl paths for net/ipv4/
sysctl table.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are some objects that are common in all the places
which are used to keep track of frag queues, they are:

 * hash table
 * LRU list
 * rw lock
 * rnd number for hash function
 * the number of queues
 * the amount of memory occupied by queues
 * secret timer

Move all this stuff into one structure (struct inet_frags)
to make it possible use them uniformly in the future. Like
with the previous patch this mostly consists of hunks like

-    write_lock(&ipfrag_lock);
+    write_lock(&ip4_frags.lock);

To address the issue with exporting the number of queues and
the amount of memory occupied by queues outside the .c file
they are declared in, I introduce a couple of helpers.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch provides generic Large Receive Offload (LRO) functionality
for IPv4/TCP traffic.

LRO combines received tcp packets to a single larger tcp packet and
passes them then to the network stack in order to increase performance
(throughput). The interface supports two modes: Drivers can either
pass SKBs or fragment lists to the LRO engine.
Signed-off-by: NJan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With help from Chris Wedgwood.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch moves the SNMP code shared between IPv4/IPv6 from proc.c
into net/ipv4/af_inet.c.  This makes sense because these functions
aren't specific to /proc.

As a result we can again skip proc.o if /proc is disabled.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Acked-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is an implementation of TCP Illinois invented by Shao Liu
at University of Illinois. It is a another variant of Reno which adapts
the alpha and beta parameters based on RTT. The basic idea is to increase
window less rapidly as delay approaches the maximum. See the papers
and talks to get a more complete description.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

YeAH-TCP is a sender-side high-speed enabled TCP congestion control
algorithm, which uses a mixed loss/delay approach to compute the
congestion window. It's design goals target high efficiency, internal,
RTT and Reno fairness, resilience to link loss while keeping network
elements load as low as possible.

For further details look here:
    http://wil.cs.caltech.edu/pfldnet2007/paper/YeAH_TCP.pdfSigned-off-by: NAngelo P. Castellani <angelo.castellani@gmail.con>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is a revision of the previously submitted patch, which alters
the way files are organized and compiled in the following manner:

	* UDP and UDP-Lite now use separate object files
	* source file dependencies resolved via header files
	  net/ipv{4,6}/udp_impl.h
	* order of inclusion files in udp.c/udplite.c adapted
	  accordingly

[NET/IPv4]: Support for the UDP-Lite protocol (RFC 3828)

This patch adds support for UDP-Lite to the IPv4 stack, provided as an
extension to the existing UDPv4 code:
        * generic routines are all located in net/ipv4/udp.c
        * UDP-Lite specific routines are in net/ipv4/udplite.c
        * MIB/statistics support in /proc/net/snmp and /proc/net/udplite
        * shared API with extensions for partial checksum coverage

[NET/IPv6]: Extension for UDP-Lite over IPv6

It extends the existing UDPv6 code base with support for UDP-Lite
in the same manner as per UDPv4. In particular,
        * UDPv6 generic and shared code is in net/ipv6/udp.c
        * UDP-Litev6 specific extensions are in net/ipv6/udplite.c
        * MIB/statistics support in /proc/net/snmp6 and /proc/net/udplite6
        * support for IPV6_ADDRFORM
        * aligned the coding style of protocol initialisation with af_inet6.c
        * made the error handling in udpv6_queue_rcv_skb consistent;
          to return `-1' on error on all error cases
        * consolidation of shared code

[NET]: UDP-Lite Documentation and basic XFRM/Netfilter support

The UDP-Lite patch further provides
        * API documentation for UDP-Lite
        * basic xfrm support
        * basic netfilter support for IPv4 and IPv6 (LOG target)
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch introduces the BEET mode (Bound End-to-End Tunnel) with as
specified by the ietf draft at the following link:

http://www.ietf.org/internet-drafts/draft-nikander-esp-beet-mode-06.txt

The patch provides only single family support (i.e. inner family =
outer family).
Signed-off-by: NDiego Beltrami <diego.beltrami@gmail.com>
Signed-off-by: NMiika Komu     <miika@iki.fi>
Signed-off-by: NHerbert Xu     <herbert@gondor.apana.org.au>
Signed-off-by: NAbhinav Pathak <abhinav.pathak@hiit.fi>
Signed-off-by: NJeff Ahrenholz <ahrenholz@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for the Commercial IP Security Option (CIPSO) to the IPv4
network stack.  CIPSO has become a de-facto standard for
trusted/labeled networking amongst existing Trusted Operating Systems
such as Trusted Solaris, HP-UX CMW, etc.  This implementation is
designed to be used with the NetLabel subsystem to provide explicit
packet labeling to LSM developers.

The CIPSO/IPv4 packet labeling works by the LSM calling a NetLabel API
function which attaches a CIPSO label (IPv4 option) to a given socket;
this in turn attaches the CIPSO label to every packet leaving the
socket without any extra processing on the outbound side.  On the
inbound side the individual packet's sk_buff is examined through a
call to a NetLabel API function to determine if a CIPSO/IPv4 label is
present and if so the security attributes of the CIPSO label are
returned to the caller of the NetLabel API function.
Signed-off-by: NPaul Moore <paul.moore@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts: f890f921

The inclusion of TCP Compound needs to be reverted at this time
because it is not 100% certain that this code conforms to the
requirements of Developer's Certificate of Origin 1.1 paragraph (b).
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds a new module for tracking TCP state variables non-intrusively
using kprobes.  It has a simple /proc interface that outputs one line
for each packet received. A sample usage is to collect congestion
window and ssthresh over time graphs.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

TCP Compound is a sender-side only change to TCP that uses
a mixed Reno/Vegas approach to calculate the cwnd.

For further details look here:
  ftp://ftp.research.microsoft.com/pub/tr/TR-2005-86.pdfSigned-off-by: NAngelo P. Castellani <angelo.castellani@gmail.com>
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

TCP Veno module is a new congestion control module to improve TCP
performance over wireless networks. The key innovation in TCP Veno is
the enhancement of TCP Reno/Sack congestion control algorithm by using
the estimated state of a connection based on TCP Vegas. This scheme
significantly reduces "blind" reduction of TCP window regardless of
the cause of packet loss.

This work is based on the research paper "TCP Veno: TCP Enhancement
for Transmission over Wireless Access Networks." C. P. Fu, S. C. Liew,
IEEE Journal on Selected Areas in Communication, Feb. 2003.

Original paper and many latest research works on veno:
 http://www.ntu.edu.sg/home/ascpfu/veno/veno.htmlSigned-off-by: NBin Zhou <zhou0022@ntu.edu.sg>
	       Cheng Peng Fu <ascpfu@ntu.edu.sg>
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

 TCP Low Priority is a distributed algorithm whose goal is to utilize only
 the excess network bandwidth as compared to the ``fair share`` of
 bandwidth as targeted by TCP. Available from:
   http://www.ece.rice.edu/~akuzma/Doc/akuzma/TCP-LP.pdf

Original Author:
 Aleksandar Kuzmanovic <akuzma@northwestern.edu>

See http://www-ece.rice.edu/networks/TCP-LP/ for their implementation.
As of 2.6.13, Linux supports pluggable congestion control algorithms.
Due to the limitation of the API, we take the following changes from
the original TCP-LP implementation:
 o We use newReno in most core CA handling. Only add some checking
   within cong_avoid.
 o Error correcting in remote HZ, therefore remote HZ will be keeped
   on checking and updating.
 o Handling calculation of One-Way-Delay (OWD) within rtt_sample, sicne
   OWD have a similar meaning as RTT. Also correct the buggy formular.
 o Handle reaction for Early Congestion Indication (ECI) within
   pkts_acked, as mentioned within pseudo code.
 o OWD is handled in relative format, where local time stamp will in
   tcp_time_stamp format.

Port from 2.4.19 to 2.6.16 as module by:
 Wong Hoi Sing Edison <hswong3i@gmail.com>
 Hung Hing Lun <hlhung3i@gmail.com>
Signed-off-by: NWong Hoi Sing Edison <hswong3i@gmail.com>
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds the structure xfrm_mode.  It is meant to represent
the operations carried out by transport/tunnel modes.

By doing this we allow additional encapsulation modes to be added
without clogging up the xfrm_input/xfrm_output paths.

Candidate modes include 4-to-6 tunnel mode, 6-to-4 tunnel mode, and
BEET modes.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Basically this patch moves the generic tunnel protocol stuff out of
xfrm4_tunnel/xfrm6_tunnel and moves it into the new files of tunnel4.c
and tunnel6 respectively.

The reason for this is that the problem that Hugo uncovered is only
the tip of the iceberg.  The real problem is that when we removed the
dependency of ipip on xfrm4_tunnel we didn't really consider the module
case at all.

For instance, as it is it's possible to build both ipip and xfrm4_tunnel
as modules and if the latter is loaded then ipip simply won't load.

After considering the alternatives I've decided that the best way out of
this is to restore the dependency of ipip on the non-xfrm-specific part
of xfrm4_tunnel.  This is acceptable IMHO because the intention of the
removal was really to be able to use ipip without the xfrm subsystem.
This is still preserved by this patch.

So now both ipip/xfrm4_tunnel depend on the new tunnel4.c which handles
the arbitration between the two.  The order of processing is determined
by a simple integer which ensures that ipip gets processed before
xfrm4_tunnel.

The situation for ICMP handling is a little bit more complicated since
we may not have enough information to determine who it's for.  It's not
a big deal at the moment since the xfrm ICMP handlers are basically
no-ops.  In future we can deal with this when we look at ICMP caching
in general.

The user-visible change to this is the removal of the TUNNEL Kconfig
prompts.  This makes sense because it can only be used through IPCOMP
as it stands.

The addition of the new modules shouldn't introduce any problems since
module dependency will cause them to be loaded.

Oh and I also turned some unnecessary pskb's in IPv6 related to this
patch to skb's.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Don't wrap entire file in #ifdef CONFIG_NETFILTER, remove a few
unneccessary includes.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace existing BIC version 1.1 with new version 2.0.
The main change is to replace the window growth function
with a cubic function as described in:
  http://www.csc.ncsu.edu/faculty/rhee/export/bitcp/cubic-paper.pdfSigned-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With this the previous setup is back, i.e. tcp_diag can be built as a module,
as dccp_diag and both share the infrastructure available in inet_diag.

If one selects CONFIG_INET_DIAG as module CONFIG_INET_TCP_DIAG will also be
built as a module, as will CONFIG_INET_DCCP_DIAG, if CONFIG_IP_DCCP was
selected static or as a module, if CONFIG_INET_DIAG is y, being statically
linked CONFIG_INET_TCP_DIAG will follow suit and CONFIG_INET_DCCP_DIAG will be
built in the same manner as CONFIG_IP_DCCP.

Now to aim at UDP, converting it to use inet_hashinfo, so that we can use
iproute2 for UDP sockets as well.

Ah, just to show an example of this new infrastructure working for DCCP :-)

[root@qemu ~]# ./ss -dane
State      Recv-Q Send-Q Local Address:Port  Peer Address:Port
LISTEN     0      0                  *:5001             *:*     ino:942 sk:cfd503a0
ESTAB      0      0          127.0.0.1:5001     127.0.0.1:32770 ino:943 sk:cfd50a60
ESTAB      0      0          127.0.0.1:32770    127.0.0.1:5001  ino:947 sk:cfd50700
TIME-WAIT  0      0          127.0.0.1:32769    127.0.0.1:5001  timer:(timewait,3.430ms,0) ino:0 sk:cf209620
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Next changeset will introduce net/ipv4/tcp_diag.c, moving the code that was put
transitioanlly in inet_diag.c.
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Next changeset will rename tcp_diag.[ch] to inet_diag.[ch].

I'm taking this longer route so as to easy review, making clear the changes
made all along the way.
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Completing the previous changeset, this also generalises tcp_v4_synq_add,
renaming it to inet_csk_reqsk_queue_hash_add, already geing used in the
DCCP tree, which I plan to merge RSN.
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

And also some TIME_WAIT functions.

[acme@toy net-2.6.14]$ grep built-in /tmp/before.size /tmp/after.size
/tmp/before.size: 282955   13122    9312  305389   4a8ed net/ipv4/built-in.o
/tmp/after.size:  281566   13122    9312  304000   4a380 net/ipv4/built-in.o
[acme@toy net-2.6.14]$

I kept them still inlined, will uninline at some point to see what
would be the performance difference.
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Netfilter cleanup
- Move ipv4 code from net/core/netfilter.c to net/ipv4/netfilter.c
- Move ipv6 netfilter code from net/ipv6/ip6_output.c to net/ipv6/netfilter.c
Signed-off-by: NHarald Welte <laforge@netfilter.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move in_aton to allow netpoll and pktgen to work without the rest of
the IPv4 stack. Fix whitespace and add comment for the odd placement.

Delete now-empty net/ipv4/utils.c

Re-enable netpoll/netconsole without CONFIG_INET
Signed-off-by: NMatt Mackall <mpm@selenic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch implements Tom Kelly's Scalable TCP congestion control algorithm 
for the modular framework.

The algorithm has some nice scaling properties, and has been used a fair bit 
in research, though is known to have significant fairness issues, so it's not 
really suitable for general purpose use.
Signed-off-by: NJohn Heffner <jheffner@psc.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>