Use DEVICE_ATTR_ADMIN_RO() macro helper instead of plain DEVICE_ATTR(),
which makes the code a bit shorter and easier to read.

Link: https://lore.kernel.org/r/20210616034419.725-4-thunder.leizhen@huawei.comSigned-off-by: NZhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Use DEVICE_ATTR_RO() macro helper instead of plain DEVICE_ATTR(), which
makes the code a bit shorter and easier to read.

Link: https://lore.kernel.org/r/20210616034419.725-3-thunder.leizhen@huawei.comSigned-off-by: NZhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Use DEVICE_ATTR_RO() macro helper instead of plain DEVICE_ATTR(), which
makes the code a bit shorter and easier to read.

Link: https://lore.kernel.org/r/20210616034419.725-2-thunder.leizhen@huawei.comAcked-by: NManish Rangankar <mrangankar@marvell.com>
Signed-off-by: NZhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The wrappers in include/linux/pci-dma-compat.h should go away.

The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.  It has been compile
tested.

When memory is allocated in 'mptfc_GetFcDevPage0()' GFP_KERNEL can be used
because it is already used in this function and no lock is acquired in the
between.

When memory is allocated in 'mptfc_GetFcPortPage0()' and
'mptfc_GetFcPortPage1()' GFP_KERNEL can be used because they already call
'mpt_config()' which has an explicit 'might_sleep()'.

While at it, also remove some useless casting.

@@ @@
-    PCI_DMA_BIDIRECTIONAL
+    DMA_BIDIRECTIONAL

@@ @@
-    PCI_DMA_TODEVICE
+    DMA_TO_DEVICE

@@ @@
-    PCI_DMA_FROMDEVICE
+    DMA_FROM_DEVICE

@@ @@
-    PCI_DMA_NONE
+    DMA_NONE

@@
expression e1, e2, e3;
@@
-    pci_alloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3;
@@
-    pci_zalloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3, e4;
@@
-    pci_free_consistent(e1, e2, e3, e4)
+    dma_free_coherent(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_single(e1, e2, e3, e4)
+    dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_single(e1, e2, e3, e4)
+    dma_unmap_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4, e5;
@@
-    pci_map_page(e1, e2, e3, e4, e5)
+    dma_map_page(&e1->dev, e2, e3, e4, e5)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_page(e1, e2, e3, e4)
+    dma_unmap_page(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_sg(e1, e2, e3, e4)
+    dma_map_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_sg(e1, e2, e3, e4)
+    dma_unmap_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+    dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_device(e1, e2, e3, e4)
+    dma_sync_single_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+    dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+    dma_sync_sg_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2;
@@
-    pci_dma_mapping_error(e1, e2)
+    dma_mapping_error(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_dma_mask(e1, e2)
+    dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_consistent_dma_mask(e1, e2)
+    dma_set_coherent_mask(&e1->dev, e2)

Link: https://lore.kernel.org/r/95afc589713ade2110e7812159ce3e9ab453ec18.1623568121.git.christophe.jaillet@wanadoo.frSigned-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fix a few style issues reported by checkpatch.pl:

 - Avoid duplicated word in comment.

 - Add missing space in messages.

 - Unneeded continuation line character.

 - Unneeded extra spaces.

 - Unneeded log message after memory allocation failure.

Link: https://lore.kernel.org/r/8cb62f0eb96ec7ce7a73fe97cb4490dd5121ecff.1623482155.git.christophe.jaillet@wanadoo.frSigned-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

If an error occurs after a pci_enable_pcie_error_reporting() call, it must
be undone by a corresponding pci_disable_pcie_error_reporting() call, as
already done in the remove function.

Link: https://lore.kernel.org/r/77adb02cfea7f1364e5603ecf3930d8597ae356e.1623482155.git.christophe.jaillet@wanadoo.fr
Fixes: 3567f36a ("[SCSI] be2iscsi: Fix AER handling in driver")
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/ufs/ufshcd.c:9770:12: warning: ‘ufshcd_rpmb_resume’ defined but not used [-Wunused-function]
 static int ufshcd_rpmb_resume(struct device *dev)
            ^~~~~~~~~~~~~~~~~~
drivers/scsi/ufs/ufshcd.c:9037:12: warning: ‘ufshcd_wl_runtime_resume’ defined but not used [-Wunused-function]
 static int ufshcd_wl_runtime_resume(struct device *dev)
            ^~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/ufs/ufshcd.c:9017:12: warning: ‘ufshcd_wl_runtime_suspend’ defined but not used [-Wunused-function]
 static int ufshcd_wl_runtime_suspend(struct device *dev)
            ^~~~~~~~~~~~~~~~~~~~~~~~~

Move it into #ifdef block to fix this.

Link: https://lore.kernel.org/r/20210617031326.36908-1-yuehaibing@huawei.comSigned-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Commit 122c81c5 ("scsi: bnx2fc: Return failure if io_req is already in
ABTS processing") made bnx2fc_eh_abort() return FAILED when io_req was
alrady in ABTS processing, regardless of the return value of
bnx2fc_abts_cleanup().  However, the change left the assignment of the
return value of bnx2fc_abts_cleanup(). Remove this.

This issue was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.

Link: https://lore.kernel.org/r/20210618164514.6299-1-sj38.park@gmail.com
Fixes: 122c81c5 ("scsi: bnx2fc: Return failure if io_req is already in ABTS processing")
Acked-by: NSaurav Kashyap <skashyap@marvell.com>
Signed-off-by: NSeongJae Park <sjpark@amazon.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Use "no-op" mailbox command to check if the adapter firmware is still
responsive.

Link: https://lore.kernel.org/r/20210619052427.6440-1-njavali@marvell.comReviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: NQuinn Tran <qutran@marvell.com>
Signed-off-by: NNilesh Javali <njavali@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When a sense code is present we should not override the SAM status; the
driver already sets it based on the response from the hypervisor.

In addition we should only copy the sense buffer if one is actually
provided by the hypervisor.

Link: https://lore.kernel.org/r/20210622091153.29231-1-hare@suse.de
Fixes: 464a00c9 ("scsi: core: Kill DRIVER_SENSE")
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Tested-by: NJiri Slaby <jirislaby@kernel.org>
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Offlining a SATA device connected to a hisi SAS controller and then
scanning the host will result in detecting 255 non-existent devices:

  # lsscsi
  [2:0:0:0]    disk    ATA      Samsung SSD 860  2B6Q  /dev/sda
  [2:0:1:0]    disk    ATA      WDC WD2003FYYS-3 1D01  /dev/sdb
  [2:0:2:0]    disk    SEAGATE  ST600MM0006      B001  /dev/sdc
  # echo "offline" > /sys/block/sdb/device/state
  # echo "- - -" > /sys/class/scsi_host/host2/scan
  # lsscsi
  [2:0:0:0]    disk    ATA      Samsung SSD 860  2B6Q  /dev/sda
  [2:0:1:0]    disk    ATA      WDC WD2003FYYS-3 1D01  /dev/sdb
  [2:0:1:1]    disk    ATA      WDC WD2003FYYS-3 1D01  /dev/sdh
  ...
  [2:0:1:255]  disk    ATA      WDC WD2003FYYS-3 1D01  /dev/sdjb

After a REPORT LUN command issued to the offline device fails, the SCSI
midlayer tries to do a sequential scan of all devices whose LUN number is
not 0. However, SATA does not support LUN numbers at all.

Introduce a generic sas_slave_alloc() handler which will return -ENXIO for
SATA devices if the requested LUN number is larger than 0 and make libsas
drivers use this function as their .slave_alloc callback.

Link: https://lore.kernel.org/r/20210622034037.1467088-1-yuyufen@huawei.comReported-by: NWu Bo <wubo40@huawei.com>
Suggested-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NJason Yan <yanaijie@huawei.com>
Signed-off-by: NYufen Yu <yuyufen@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Since scsi_mq_alloc_queue() only has one caller, inline it. This change was
suggested by Christoph Hellwig.

Link: https://lore.kernel.org/r/20210622024654.12543-1-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Ed Tsai <ed.tsai@mediatek.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The shifting of the u8 integer returned fom ahc_inb(ahc, port+3) by 24 bits
to the left will be promoted to a 32 bit signed int and then sign-extended
to a u64. In the event that the top bit of the u8 is set then all then all
the upper 32 bits of the u64 end up as also being set because of the
sign-extension. Fix this by casting the u8 values to a u64 before the 24
bit left shift.

[ This dates back to 2002, I found the offending commit from the git
history git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git,
commit f58eb66c0b0a ("Update aic7xxx driver to 6.2.10...") ]

Link: https://lore.kernel.org/r/20210621151727.20667-1-colin.king@canonical.comSigned-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unintended sign extension")

vport is linked onto the driver's vport list at allocation, but failure
path fails to remove it from the list.

Change location of linkage until after complete vport completion.

Link: https://lore.kernel.org/r/20210619155729.20049-1-jsmart2021@gmail.com
Fixes: 692e5d73 ("scsi: elx: efct: LIO backend interface routines")
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Co-developed-by: NRam Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: NRam Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Flags value is being set to a constant and ANDed with 0 which always
results in 0.

Remove the assignment line.

Link: https://lore.kernel.org/r/20210619155641.19942-1-jsmart2021@gmail.com
Fixes: 1628f5b4 ("scsi: elx: libefc_sli: Populate and post different WQEs")
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Co-developed-by: NRam Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: NRam Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally reading across neighboring array fields.

SCtmp->sense_buffer is 96 bytes, but ecbptr->sense is 14 bytes. Instead of
over-reading ecbptr->sense, copy only the actual contents and zero pad the
remaining bytes, avoiding potential over-reads.

Link: https://lore.kernel.org/r/20210616212437.1727088-1-keescook@chromium.orgSigned-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally reading across neighboring array fields.

pcmd->sense_buffer is 96 bytes, and was being manually zero-filled.
However, struct SENSE_DATA is 18 bytes, with ccb->arcmsr_cdb.SenseData only
being 15 bytes, resulting in a 3 byte over-read.

Copy only the contents of ccb->arcmsr_cdb.SenseData and zero fill the
remainder, avoiding potential over-reads.

Link: https://lore.kernel.org/r/20210616212428.1726958-1-keescook@chromium.orgSigned-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy() avoid intentionally reading across
neighboring array fields.

scb->scsi_cmd->sense_buffer is 96 bytes:
	#define SCSI_SENSE_BUFFERSIZE        96

tapeDCDB->sense_info is 56 bytes:
	typedef struct {
	   ...
	   uint8_t   sense_info[56];
	} IPS_DCDB_TABLE_TAPE, ...

scb->dcdb.sense_info is 64 bytes:
	typedef struct {
	   ...
	   uint8_t   sense_info[64];
	   ...
	} IPS_DCDB_TABLE, ...

Copying 96 bytes from either was copying beyond the end of the respective
buffers, leading to potential memory content exposures. Correctly copy the
actual buffer contents and zero pad the remaining bytes.

Link: https://lore.kernel.org/r/20210616212408.1726812-1-keescook@chromium.orgSigned-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The function is missing a of_node_put() on node. Fix this by adding the
call before returning.

Link: https://lore.kernel.org/r/1623929522-4389-1-git-send-email-zou_wei@huawei.comReported-by: NHulk Robot <hulkci@huawei.com>
Reviewed-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NZou Wei <zou_wei@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Calling a nested spin_lock_irqsave() will overwrite the original "flags" so
that they can not be enabled again at the end.

Link: https://lore.kernel.org/r/YMyjH16k4M1yEmmU@mwanda
Fixes: 3146240f ("scsi: elx: libefc: FC Domain state machine interfaces")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The comparison of the u32 variable rc to less than zero always false
because it is unsigned. Fix this by making it an int.

Link: https://lore.kernel.org/r/20210616170401.15831-1-colin.king@canonical.com
Fixes: 202bfdff ("scsi: elx: libefc: FC node ELS and state handling")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unsigned compared against 0")

debugfs_create_xxx routines, which return pointers, are being checked for
error by looking for NULL values. The routines may return pointer-munged
-Exxx codes, so they should be using IS_ERR() to adapt.

There are two cases:

 - The first case is on initial directory creation, which actually doesn't
   need to be checked. So remove the check.

 - Creation of the sessions subdirectory. Modify this creation to create
   under the initial directory created, and fix failure check.

Link: https://lore.kernel.org/r/20210618233004.83769-1-jsmart2021@gmail.com
Fixes: 4df84e84 ("scsi: elx: efct: Driver initialization routines")
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

efct_hw_iotype_is_originator() is returning a negative (-EIO) status which
doesn't make sense for a u8 function type.

Reviewing the code, the function only needs to return true/false, thus a
bool status is most appropriate.

Change the function return type and patch up the one callee as the bool
inverses the if check.

Link: https://lore.kernel.org/r/20210618231524.83179-1-jsmart2021@gmail.com
Fixes: 4df84e84 ("scsi: elx: efct: Driver initialization routines")
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

cmpxchg is being used on a bool type, which is requiring architecture
support that isn't compatible with a bool.

Convert variable abort_in_progress from bool to int.

Link: https://lore.kernel.org/r/20210618174050.80302-1-jsmart2021@gmail.com
Fixes: ebc076b3 ("scsi: elx: efct: Tie into kernel Kconfig and build process")
Reported-by: Nkernel test robot <lkp@intel.com>
Co-developed-by: NRam Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: NRam Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

clang warns:

drivers/scsi/elx/efct/efct_hw.c:1523:17: warning: address of array
'ctx->buf' will always evaluate to 'true' [-Wpointer-bool-conversion]
                              (!ctx->buf ? U32_MAX : *((u32 *)ctx->buf)));
                               ~~~~~~^~~

buf is an array in the middle of a struct so deferencing it is not a
problem as long as ctx is not NULL. Eliminate the check, which fixes the
warning.

Link: https://github.com/ClangBuiltLinux/linux/issues/1398
Link: https://lore.kernel.org/r/20210617063123.21239-1-nathan@kernel.org
Fixes: 580c0255 ("scsi: elx: efct: RQ buffer, memory pool allocation and deallocation APIs")
Reviewed-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NNathan Chancellor <nathan@kernel.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

clang warns:

drivers/scsi/elx/efct/efct_lio.c:1216:24: warning: variable 'id' is
uninitialized when used here [-Wuninitialized]
                      se_sess, node, id);
                                     ^~

Shuffle the debug print after id's initialization so that the actual value
is printed.

Link: https://github.com/ClangBuiltLinux/linux/issues/1397
Link: https://lore.kernel.org/r/20210617061721.2405511-1-nathan@kernel.org
Fixes: 692e5d73 ("scsi: elx: efct: LIO backend interface routines")
Reviewed-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NNathan Chancellor <nathan@kernel.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fix to return negative error code -ENOMEM from the error handling case
instead of 0. Also fix typo in error message.

Link: https://lore.kernel.org/r/20210617024837.1023069-1-weiyongjun1@huawei.com
Fixes: 4df84e84 ("scsi: elx: efct: Driver initialization routines")
Reported-by: NHulk Robot <hulkci@huawei.com>
Reviewed-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The variable "lun" is being initialized with a value that is never read, it
is being updated later on. The assignment is redundant and can be removed.

Link: https://lore.kernel.org/r/20210616171621.16176-1-colin.king@canonical.comReviewed-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unused value")

There is a spelling mistake in a efc_log_info message. Fix it.

Link: https://lore.kernel.org/r/20210616142637.12706-1-colin.king@canonical.comSigned-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Integration with VMID patches resulted in a build error when
CONFIG_DEBUG_FS is disabled and driver option CONFIG_SCSI_LPFC_DEBUG_FS is
disabled.

It results in an undefined variable:
lpfc_scsi:5595:3: error: 'uuid' undeclared (first use in this function); did you mean 'upid'?

Link: https://lore.kernel.org/r/20210618171842.79710-1-jsmart2021@gmail.com
Fixes: 33c79741 ("scsi: lpfc: vmid: Introduce VMID in I/O path")
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The continue statement at the end of a loop has no effect, remove it.

Link: https://lore.kernel.org/r/20210617114347.10247-1-colin.king@canonical.comSigned-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Continue has no effect")

The continue statement at the end of a for-loop has no effect, remove it.

Link: https://lore.kernel.org/r/20210617073743.151008-1-colin.king@canonical.comSigned-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Continue has no effect")

Switch to use module_parport_driver() to reduce boilerplate code.

Link: https://lore.kernel.org/r/20210616142540.45676-1-andriy.shevchenko@linux.intel.comSigned-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Switch to use module_parport_driver() to reduce boilerplate code.

Link: https://lore.kernel.org/r/20210616142429.45373-1-andriy.shevchenko@linux.intel.comSigned-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When an expander does not contain any 'phys', an appropriate error code -1
should be returned, as done elsewhere in this function. However, we
currently do not explicitly assign this error code to 'rc'. As a result, 0
was incorrectly returned.

Link: https://lore.kernel.org/r/20210514081300.6650-1-thunder.leizhen@huawei.com
Fixes: f92363d1 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NZhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fix the structurally dead code (UNREACHABLE) type of error reported by
Coverity.

Link: https://lore.kernel.org/r/20210618155506.2609112-1-suganath-prabu.subramani@broadcom.comReported-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NSuganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fix the following warnings:

  drivers/scsi/mpi3mr/mpi3mr_os.c:24:5: warning: symbol 'prot_mask' was not declared. Should it be static?
  drivers/scsi/mpi3mr/mpi3mr_os.c:28:5: warning: symbol 'prot_guard_mask' was not declared. Should it be static?
  drivers/scsi/mpi3mr/mpi3mr_os.c:31:5: warning: symbol 'logging_level' was not declared. Should it be static?

Link: https://lore.kernel.org/r/20210604071407.1360742-1-yangyingliang@huawei.comReported-by: NHulk Robot <hulkci@huawei.com>
Acked-by: NKashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fix to return a negative error code from the error handling case instead of
0 as done elsewhere in this function.

Link: https://lore.kernel.org/r/20210603151653.711020-1-yangyingliang@huawei.com
Fixes: fb9b0457 ("scsi: mpi3mr: Add support for recovering controller")
Fixes: 824a1566 ("scsi: mpi3mr: Base driver code")
Reported-by: NHulk Robot <hulkci@huawei.com>
Acked-by: NKashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Goto unlock path before return from function in the error handling case.

Link: https://lore.kernel.org/r/20210603152803.717505-1-yangyingliang@huawei.com
Fixes: c9566231 ("scsi: mpi3mr: Create operational request and reply queue pair")
Reported-by: NHulk Robot <hulkci@huawei.com>
Acked-by: NKashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This final patch ties the efct driver into the kernel Kconfig and build
linkages in the drivers/scsi directory.

Link: https://lore.kernel.org/r/20210601235512.20104-32-jsmart2021@gmail.comReported-by: Nkernel test robot <lkp@intel.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NDaniel Wagner <dwagner@suse.de>
Co-developed-by: NRam Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: NRam Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>