Used to set up smu power logging.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Used to set up smu power logging.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

move powerplay and amdgpu shared structures
and definitions to kgd_pp_interface.h.  This
is the interface between the base driver
and powerplay.
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Clean up the interface.
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

those functions are exported to DC
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Move the display/power interfaces to one place.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We always use the BO mem now.

v2: minor rebase
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Display can't seem to handle this correctly.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We need to test if any domain fits, not all of them.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We always need to bind pinned BOs, not just when the caller requested the
address.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This allows us to specify multiple possible placements again.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The exclusive mode has real-time limitation in reality, such like being
done in 300ms. It's easy observed if running many VF/VMs in single host
with heavy CPU workload.

If we find the init fails due to exclusive mode timeout, try it again.

v2:
 - rewrite the condition for readable value.

v3:
 - fix typo, add comments for sleep
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: Npding <Pixel.Ding@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NMonk Liu <monk.liu@amd.com>
Signed-off-by: Npding <Pixel.Ding@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Driver can use this interface to check if there's a function level
reset done in hypervisor. It's helpful when IRQ handler for reset
is not ready, or special handling is required.
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NMonk Liu <monk.liu@amd.com>
Signed-off-by: Npding <Pixel.Ding@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

MMIO space can be blocked on virtualised device. Add this
function to check if MMIO is blocked or not.

Todo: need a reliable method such like communation
with hypervisor.

v2:
 - add comments inline
Signed-off-by: Npding <Pixel.Ding@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Normally all waiting get timeout if there's one.
Release the lock and return immediately when timeout happens.

v2:
 - set the se_sh to broadcase before return
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: Npding <Pixel.Ding@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When this VF stays in exclusive mode for long, other VFs will be
impacted.

The redundant messages causes exclusive mode timeout when they're
redirected. That is a normal use case for cloud service to redirect
guest log to virtual serial port.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: Npding <Pixel.Ding@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

this query will give flag bits to indicate what happend
on the given context
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

reset_counter marks the reset counter number once the context
is created, shouldn't be changed due to query.

To keep U/K interface on the ctx_query and keep ctx's reset_counter
logic compatible with GPU RESET feature, now use another var named
"reset_counter_query" to replace the original checked & updated in
amdgpu_ctx_query.
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Bug:
Kfifo is limited at size, during GPU reset it would fill up to limit
and the pushing thread (producer) would wait for the scheduler worker to
consume the items in the fifo while holding reservation lock
on a BO. The gpu reset thread on the other hand blocks the scheduler
during reset. Before it unblocks the sceduler it might want
to recover VRAM and so will try to reserve the same BO the producer
thread is already holding creating a deadlock.

Fix:
Switch from kfifo to SPSC queue which is unlimited in size.
Signed-off-by: NAndrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It is intended to sabstitute the bounded fifo we are currently
using.
Signed-off-by: NAndrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

merge the setting guilty on context into this function
to avoid implement extra routine.

v2:
go through entity list and compare the fence_ctx
before operate on the entity, otherwise the entity
may be just a wild pointer
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NChunming Zhou <David1.Zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

this way the real interested guilty is connected to entity->guilty
pointer, and we can use entity->pointer later in gpu recovery procedure
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NChunming Zhou <David1.Zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

this member will be used later, it will points to
the real var inside of context and CS_SUBMIT & gpu schdduler
can decide if skip a job depends on context->guilty or *entity->guilty
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NChunming Zhou <David1.Zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

since gpu_scheduler source domain cannot access amdgpu variable
so need create the hang_limit membewr for sched, and it can
refer it for the upcoming GPU RESET patches

v2:
make hang_limit a parameter of sched_init()
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NChunming Zhou <David1.Zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

cleanups, now only operate on the given ring
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Bug: amdgpu_job_free_cb was accessing s_job->s_entity when the allocated
amdgpu_ctx (and the entity inside it) were already deallocated from
amdgpu_cs_parser_fini.

Fix: Save job's priority on it's creation instead of accessing it from
s_entity later on.
Signed-off-by: NAndrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Merge tag 'drm-intel-next-2017-11-17-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

More change sets for 4.16:

- Many improvements for selftests and other igt tests (Chris)
- Forcewake with PUNIT->PMIC bus fixes and robustness (Hans)
- Define an engine class for uABI (Tvrtko)
- Context switch fixes and improvements (Chris)
- GT powersavings and power gating simplification and fixes (Chris)
- Other general driver clean-ups (Chris, Lucas, Ville)
- Removing old, useless and/or bad workarounds (Chris, Oscar, Radhakrishna)
- IPS, pipe config, etc in preparation for another Fast Boot attempt (Maarten)
- OA perf fixes and support to Coffee Lake and Cannonlake (Lionel)
- Fixes around GPU fault registers (Michel)
- GEM Proxy (Tina)
- Refactor of Geminilake and Cannonlake plane color handling (James)
- Generalize transcoder loop (Mika Kahola)
- New HW Workaround for Cannonlake and Geminilake (Rodrigo)
- Resume GuC before using GEM (Chris)
- Stolen Memory handling improvements (Ville)
- Initialize entry in PPAT for older compilers (Chris)
- Other fixes and robustness improvements on execbuf (Chris)
- Improve logs of GEM_BUG_ON (Mika Kuoppala)
- Rework with massive rename of GuC functions and files (Sagar)
- Don't sanitize frame start delay if pipe is off (Ville)
- Cannonlake clock fixes (Rodrigo)
- Cannonlake HDMI 2.0 support (Rodrigo)
- Add a GuC doorbells selftest (Michel)
- Add might_sleep() check to our wait_for() (Chris)

Many GVT changes for 4.16:

- CSB HWSP update support (Weinan)
- GVT debug helpers, dyndbg and debugfs (Chuanxiao, Shuo)
- full virtualized opregion (Xiaolin)
- VM health check for sane fallback (Fred)
- workload submission code refactor for future enabling (Zhi)
- Updated repo URL in MAINTAINERS (Zhenyu)
- other many misc fixes

* tag 'drm-intel-next-2017-11-17-1' of git://anongit.freedesktop.org/drm/drm-intel: (260 commits)
  drm/i915: Update DRIVER_DATE to 20171117
  drm/i915: Add a policy note for removing workarounds
  drm/i915/selftests: Report ENOMEM clearly for an allocation failure
  Revert "drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk"
  drm/i915: Calculate g4x intermediate watermarks correctly
  drm/i915: Calculate vlv/chv intermediate watermarks correctly, v3.
  drm/i915: Pass crtc_state to ips toggle functions, v2
  drm/i915: Pass idle crtc_state to intel_dp_sink_crc
  drm/i915: Enable FIFO underrun reporting after initial fastset, v4.
  drm/i915: Mark the userptr invalidate workqueue as WQ_MEM_RECLAIM
  drm/i915: Add might_sleep() check to wait_for()
  drm/i915/selftests: Add a GuC doorbells selftest
  drm/i915/cnl: Extend HDMI 2.0 support to CNL.
  drm/i915/cnl: Simplify dco_fraction calculation.
  drm/i915/cnl: Don't blindly replace qdiv.
  drm/i915/cnl: Fix wrpll math for higher freqs.
  drm/i915/cnl: Fix, simplify and unify wrpll variable sizes.
  drm/i915/cnl: Remove useless conversion.
  drm/i915/cnl: Remove spurious central_freq.
  drm/i915/selftests: exercise_ggtt may have nothing to do
  ...

Cross-subsystem Changes:

- device tree doc for the Mitsubishi AA070MC01 and Tianma TM070RVHG71
panels (Lukasz Majewski) and for a 2nd endpoint on stm32 (Philippe Cornu)

Core Changes:

The most important changes are:

- Add drm_driver .last_close and .output_poll_changed helpers to reduce
fbdev emulation footprint in drivers (Noralf)
- Fix plane clipping in core and for vmwgfx (Ville)

Then we have a bunch of of improvement for print and debug such as the
addition of a framebuffer debugfs file. ELD connector, HDMI and
improvements.  And a bunch of misc improvements, clean ups and style
changes and doc updates

[airlied: drop eld bits from amdgpu_dm]

Driver Changes:

- sii8620: filter unsupported modes and add DVI mode support (Maciej Purski)
- rockchip: analogix_dp: Remove unnecessary init code (Jeffy Chen)
- virtio, cirrus: add fb create_handle support to enable screenshots(Lepton Wu)
- virtio: replace reference/unreference with get/put (Aastha Gupta)
- vc4, gma500: Convert timers to use timer_setup() (Kees Cook)
- vc4: Reject HDMI modes with too high of clocks (Eric)
- vc4: Add support for more pixel formats (Dave Stevenson)
- stm: dsi: Rename driver name to "stm32-display-dsi" (Philippe Cornu)
- stm: ltdc: add a 2nd endpoint (Philippe Cornu)
- via: use monotonic time for VIA_WAIT_IRQ (Arnd Bergmann)

* tag 'drm-misc-next-2017-11-30' of git://anongit.freedesktop.org/drm/drm-misc: (96 commits)
  drm/bridge: tc358767: add copyright lines
  MAINTAINERS: change maintainer for Rockchip drm drivers
  drm/vblank: Fix vblank timestamp debugs
  drm/via: use monotonic time for VIA_WAIT_IRQ
  dma-buf: Fix ifnullfree.cocci warnings
  drm/printer: Add drm_vprintf()
  drm/edid: Allow HDMI infoframe without VIC or S3D
  video/hdmi: Allow "empty" HDMI infoframes
  dma-buf/fence: Fix lock inversion within dma-fence-array
  drm/sti: Handle return value of platform_get_irq_byname
  drm/vc4: Add support for NV21 and NV61.
  drm/vc4: Use .pixel_order instead of custom .flip_cbcr
  drm/vc4: Add support for DRM_FORMAT_RGB888 and DRM_FORMAT_BGR888
  drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c
  drm: Check crtc_state->enable rather than crtc->enabled in drm_plane_helper_check_state()
  drm/vmwgfx: Try to fix plane clipping
  drm/vmwgfx: Use drm_plane_helper_check_state()
  drm/vmwgfx: Remove bogus crtc coords vs fb size check
  gpu: gma500: remove unneeded DRIVER_LICENSE #define
  drm: don't link DP aux i2c adapter to the hardware device node
  ...

Pull ARM fix from Russell King:
 "Just one fix this time around, for the late commit in the merge window
  that triggered a problem with qemu. Qemu is apparently also going to
  receive a fix for the discovered issue"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: avoid faulting on qemu

Pull i2c fixes from Wolfram Sang:
 "Here are two bugfixes for I2C, fixing a memleak in the core and irq
  allocation for i801.

  Also three bugfixes for the at24 eeprom driver which Bartosz collected
  while taking over maintainership for this driver"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  eeprom: at24: check at24_read/write arguments
  eeprom: at24: fix reading from 24MAC402/24MAC602
  eeprom: at24: correctly set the size for at24mac402
  i2c: i2c-boardinfo: fix memory leaks on devinfo
  i2c: i801: Fix Failed to allocate irq -2147483648 error

Merge tag 'hwmon-for-linus-v4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
 "Fixes:

   - Drop reference to obsolete maintainer tree

   - Fix overflow bug in pmbus driver

   - Fix SMBUS timeout problem in jc42 driver

  For the SMBUS timeout handling, we had a brief discussion if this
  should be considered a bug fix or a feature. Peter says "it fixes real
  problems where the application misbehave due to faulty content when
  reading from an eeprom", and he needs the patch in his company's v4.14
  images. This is good enough for me and warrants backport to stable
  kernels"

* tag 'hwmon-for-linus-v4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (jc42) optionally try to disable the SMBUS timeout
  hwmon: (pmbus) Use 64bit math for DIRECT format values
  hwmon: Drop reference to Jean's tree

Merge tag 'at24-4.15-fixes-for-wolfram' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current

Please consider pulling the following fixes for v4.15. While it doesn't
fix any regression introduced in the v4.15 merge window, we have a
feature in at24 since linux v4.8 - reading the mac address block from
at24mac series - which turned out to be not working.

This pull request contains changes that fix it together with a patch
that hardens the read and write argument sanitization with
out-of-bounds checks that were missing.

Pull NFS client fixes from Anna Schumaker:
 "These patches fix a problem with compiling using an old version of
  gcc, and also fix up error handling in the SUNRPC layer.

   - NFSv4: Ensure gcc 4.4.4 can compile initialiser for
     "invalid_stateid"

   - SUNRPC: Allow connect to return EHOSTUNREACH

   - SUNRPC: Handle ENETDOWN errors"

* tag 'nfs-for-4.15-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  SUNRPC: Handle ENETDOWN errors
  SUNRPC: Allow connect to return EHOSTUNREACH
  NFSv4: Ensure gcc 4.4.4 can compile initialiser for "invalid_stateid"

Pull xfs fixes from Darrick Wong:
 "Here are some bug fixes for 4.15-rc2.

   - fix memory leaks that appeared after removing ifork inline data
     buffer

   - recover deferred rmap update log items in correct order

   - fix memory leaks when buffer construction fails

   - fix memory leaks when bmbt is corrupt

   - fix some uninitialized variables and math problems in the quota
     scrubber

   - add some omitted attribution tags on the log replay commit

   - fix some UBSAN complaints about integer overflows with large sparse
     files

   - implement an effective inode mode check in online fsck

   - fix log's inability to retry quota item writeout due to transient
     errors"

* tag 'xfs-4.15-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: Properly retry failed dquot items in case of error during buffer writeback
  xfs: scrub inode mode properly
  xfs: remove unused parameter from xfs_writepage_map
  xfs: ubsan fixes
  xfs: calculate correct offset in xfs_scrub_quota_item
  xfs: fix uninitialized variable in xfs_scrub_quota
  xfs: fix leaks on corruption errors in xfs_bmap.c
  xfs: fortify xfs_alloc_buftarg error handling
  xfs: log recovery should replay deferred ops in order
  xfs: always free inline data before resetting inode fork during ifree

Merge tag 'riscv-for-linus-4.15-rc2_cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux

Pull RISC-V cleanups and ABI fixes from Palmer Dabbelt:
 "This contains a handful of small cleanups that are a result of
  feedback that didn't make it into our original patch set, either
  because the feedback hadn't been given yet, I missed the original
  emails, or we weren't ready to submit the changes yet.

  I've been maintaining the various cleanup patch sets I have as their
  own branches, which I then merged together and signed. Each merge
  commit has a short summary of the changes, and each branch is based on
  your latest tag (4.15-rc1, in this case). If this isn't the right way
  to do this then feel free to suggest something else, but it seems sane
  to me.

  Here's a short summary of the changes, roughly in order of how
  interesting they are.

   - libgcc.h has been moved from include/lib, where it's the only
     member, to include/linux. This is meant to avoid tab completion
     conflicts.

   - VDSO entries for clock_get/gettimeofday/getcpu have been added.
     These are simple syscalls now, but we want to let glibc use them
     from the start so we can make them faster later.

   - A VDSO entry for instruction cache flushing has been added so
     userspace can flush the instruction cache.

   - The VDSO symbol versions for __vdso_cmpxchg{32,64} have been
     removed, as those VDSO entries don't actually exist.

   - __io_writes has been corrected to respect the given type.

   - A new READ_ONCE in arch_spin_is_locked().

   - __test_and_op_bit_ord() is now actually ordered.

   - Various small fixes throughout the tree to enable allmodconfig to
     build cleanly.

   - Removal of some dead code in our atomic support headers.

   - Improvements to various comments in our atomic support headers"

* tag 'riscv-for-linus-4.15-rc2_cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux: (23 commits)
  RISC-V: __io_writes should respect the length argument
  move libgcc.h to include/linux
  RISC-V: Clean up an unused include
  RISC-V: Allow userspace to flush the instruction cache
  RISC-V: Flush I$ when making a dirty page executable
  RISC-V: Add missing include
  RISC-V: Use define for get_cycles like other architectures
  RISC-V: Provide stub of setup_profiling_timer()
  RISC-V: Export some expected symbols for modules
  RISC-V: move empty_zero_page definition to C and export it
  RISC-V: io.h: type fixes for warnings
  RISC-V: use RISCV_{INT,SHORT} instead of {INT,SHORT} for asm macros
  RISC-V: use generic serial.h
  RISC-V: remove spin_unlock_wait()
  RISC-V: `sfence.vma` orderes the instruction cache
  RISC-V: Add READ_ONCE in arch_spin_is_locked()
  RISC-V: __test_and_op_bit_ord should be strongly ordered
  RISC-V: Remove smb_mb__{before,after}_spinlock()
  RISC-V: Remove __smp_bp__{before,after}_atomic
  RISC-V: Comment on why {,cmp}xchg is ordered how it is
  ...