For ACLs implemented using either FIB rules or FIB entries, the BPF
program needs the FIB lookup status to be able to drop the packet.
Since the bpf_fib_lookup API has not reached a released kernel yet,
change the return code to contain an encoding of the FIB lookup
result and return the nexthop device index in the params struct.

In addition, inform the BPF program of any post FIB lookup reason as
to why the packet needs to go up the stack.

The fib result for unicast routes must have an egress device, so remove
the check that it is non-NULL.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Commit 67f29e07 ("bpf: devmap introduce dev_map_enqueue") changed
the return value type of __devmap_lookup_elem() from struct net_device *
to struct bpf_dtab_netdev * but forgot to modify generic XDP code
accordingly.

Thus generic XDP incorrectly used struct bpf_dtab_netdev where struct
net_device is expected, then skb->dev was set to invalid value.

v2:
- Fix compiler warning without CONFIG_BPF_SYSCALL.

Fixes: 67f29e07 ("bpf: devmap introduce dev_map_enqueue")
Signed-off-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: NYonghong Song <yhs@fb.com>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

As Michal noted the flow struct takes both the flow label and priority.
Update the bpf_fib_lookup API to note that it is flowinfo and not just
the flow label.

Cc: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

This is the first real user of the XDP_XMIT_FLUSH flag.

As pointed out many times, XDP_REDIRECT without using BPF maps is
significant slower than the map variant.  This is primary due to the
lack of bulking, as the ndo_xdp_flush operation is required after each
frame (to avoid frames hanging on the egress device).

It is still possible to optimize this case.  Instead of invoking two
NDO indirect calls, which are very expensive with CONFIG_RETPOLINE,
instead instruct ndo_xdp_xmit to flush via XDP_XMIT_FLUSH flag.
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Acked-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

This patch only change the API and reject any use of flags. This is an
intermediate step that allows us to implement the flush flag operation
later, for each individual driver in a separate patch.

The plan is to implement flush operation via XDP_XMIT_FLUSH flag
and then remove XDP_XMIT_FLAGS_NONE when done.
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Acked-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Since the remaining bits are not filled in struct bpf_tunnel_key
resp. struct bpf_xfrm_state and originate from uninitialized stack
space, we should make sure to clear them before handing control
back to the program.

Also add a padding element to struct bpf_xfrm_state for future use
similar as we have in struct bpf_tunnel_key and clear it as well.

  struct bpf_xfrm_state {
      __u32                      reqid;            /*     0     4 */
      __u32                      spi;              /*     4     4 */
      __u16                      family;           /*     8     2 */

      /* XXX 2 bytes hole, try to pack */

      union {
          __u32              remote_ipv4;          /*           4 */
          __u32              remote_ipv6[4];       /*          16 */
      };                                           /*    12    16 */

      /* size: 28, cachelines: 1, members: 4 */
      /* sum members: 26, holes: 1, sum holes: 2 */
      /* last cacheline: 28 bytes */
  };
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Add a new bpf_skb_cgroup_id() helper that allows to retrieve the
cgroup id from the skb's socket. This is useful in particular to
enable bpf_get_cgroup_classid()-like behavior for cgroup v1 in
cgroup v2 by allowing ID based matching on egress. This can in
particular be used in combination with applying policy e.g. from
map lookups, and also complements the older bpf_skb_under_cgroup()
interface. In user space the cgroup id for a given path can be
retrieved through the f_handle as demonstrated in [0] recently.

  [0] https://lkml.org/lkml/2018/5/22/1190Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Update bpf_fib_lookup to return -EAFNOSUPPORT for unsupported address
families. Allows userspace to probe for support as more are added
(e.g., AF_MPLS).
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Verify flags argument contains only known flags. Allows programs to probe
for support as more are added.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

The local variable is only used while CONFIG_IPV6 enabled

net/core/filter.c: In function ‘sk_msg_convert_ctx_access’:
net/core/filter.c:6489:6: warning: unused variable ‘off’ [-Wunused-variable]
  int off;
      ^
This puts it into #ifdef.

Fixes: 303def35 ("bpf: allow sk_msg programs to read sock fields")
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Acked-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

In addition to already existing BPF hooks for sys_bind and sys_connect,
the patch provides new hooks for sys_sendmsg.

It leverages existing BPF program type `BPF_PROG_TYPE_CGROUP_SOCK_ADDR`
that provides access to socket itlself (properties like family, type,
protocol) and user-passed `struct sockaddr *` so that BPF program can
override destination IP and port for system calls such as sendto(2) or
sendmsg(2) and/or assign source IP to the socket.

The hooks are implemented as two new attach types:
`BPF_CGROUP_UDP4_SENDMSG` and `BPF_CGROUP_UDP6_SENDMSG` for UDPv4 and
UDPv6 correspondingly.

UDPv4 and UDPv6 separate attach types for same reason as sys_bind and
sys_connect hooks, i.e. to prevent reading from / writing to e.g.
user_ip6 fields when user passes sockaddr_in since it'd be out-of-bound.

The difference with already existing hooks is sys_sendmsg are
implemented only for unconnected UDP.

For TCP it doesn't make sense to change user-provided `struct sockaddr *`
at sendto(2)/sendmsg(2) time since socket either was already connected
and has source/destination set or wasn't connected and call to
sendto(2)/sendmsg(2) would lead to ENOTCONN anyway.

Connected UDP is already handled by sys_connect hooks that can override
source/destination at connect time and use fast-path later, i.e. these
hooks don't affect UDP fast-path.

Rewriting source IP is implemented differently than that in sys_connect
hooks. When sys_sendmsg is used with unconnected UDP it doesn't work to
just bind socket to desired local IP address since source IP can be set
on per-packet basis by using ancillary data (cmsg(3)). So no matter if
socket is bound or not, source IP has to be rewritten on every call to
sys_sendmsg.

To do so two new fields are added to UAPI `struct bpf_sock_addr`;
* `msg_src_ip4` to set source IPv4 for UDPv4;
* `msg_src_ip6` to set source IPv6 for UDPv6.
Signed-off-by: NAndrey Ignatov <rdna@fb.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NMartin KaFai Lau <kafai@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This patch change the API for ndo_xdp_xmit to support bulking
xdp_frames.

When kernel is compiled with CONFIG_RETPOLINE, XDP sees a huge slowdown.
Most of the slowdown is caused by DMA API indirect function calls, but
also the net_device->ndo_xdp_xmit() call.

Benchmarked patch with CONFIG_RETPOLINE, using xdp_redirect_map with
single flow/core test (CPU E5-1650 v4 @ 3.60GHz), showed
performance improved:
 for driver ixgbe: 6,042,682 pps -> 6,853,768 pps = +811,086 pps
 for driver i40e : 6,187,169 pps -> 6,724,519 pps = +537,350 pps

With frames avail as a bulk inside the driver ndo_xdp_xmit call,
further optimizations are possible, like bulk DMA-mapping for TX.

Testing without CONFIG_RETPOLINE show the same performance for
physical NIC drivers.

The virtual NIC driver tun sees a huge performance boost, as it can
avoid doing per frame producer locking, but instead amortize the
locking cost over the bulk.

V2: Fix compile errors reported by kbuild test robot <lkp@intel.com>
V4: Isolated ndo, driver changes and callers.
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Notice how this allow us get XDP statistic without affecting the XDP
performance, as tracepoint is no-longer activated on a per packet basis.

V5: Spotted by John Fastabend.
 Fix 'sent' also counted 'drops' in this patch, a later patch corrected
 this, but it was a mistake in this intermediate step.
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Functionality is the same, but the ndo_xdp_xmit call is now
simply invoked from inside the devmap.c code.

V2: Fix compile issue reported by kbuild test robot <lkp@intel.com>

V5: Cleanups requested by Daniel
 - Newlines before func definition
 - Use BUILD_BUG_ON checks
 - Remove unnecessary use return value store in dev_map_enqueue
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

This patch adds the End.BPF action to the LWT seg6local infrastructure.
This action works like any other seg6local End action, meaning that an IPv6
header with SRH is needed, whose DA has to be equal to the SID of the
action. It will also advance the SRH to the next segment, the BPF program
does not have to take care of this.

Since the BPF program may not be a source of instability in the kernel, it
is important to ensure that the integrity of the packet is maintained
before yielding it back to the IPv6 layer. The hook hence keeps track if
the SRH has been altered through the helpers, and re-validates its
content if needed with seg6_validate_srh. The state kept for validation is
stored in a per-CPU buffer. The BPF program is not allowed to directly
write into the packet, and only some fields of the SRH can be altered
through the helper bpf_lwt_seg6_store_bytes.

Performances profiling has shown that the SRH re-validation does not induce
a significant overhead. If the altered SRH is deemed as invalid, the packet
is dropped.

This validation is also done before executing any action through
bpf_lwt_seg6_action, and will not be performed again if the SRH is not
modified after calling the action.

The BPF program may return 3 types of return codes:
    - BPF_OK: the End.BPF action will look up the next destination through
             seg6_lookup_nexthop.
    - BPF_REDIRECT: if an action has been executed through the
          bpf_lwt_seg6_action helper, the BPF program should return this
          value, as the skb's destination is already set and the default
          lookup should not be performed.
    - BPF_DROP : the packet will be dropped.
Signed-off-by: NMathieu Xhonneux <m.xhonneux@gmail.com>
Acked-by: NDavid Lebrun <dlebrun@google.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

The new bpf_lwt_push_encap helper should only be accessible within the
LWT BPF IN hook, and not the OUT one, as this may lead to a skb under
panic.

At the moment, both LWT BPF IN and OUT share the same list of helpers,
whose calls are authorized by the verifier. This patch separates the
verifier ops for the IN and OUT hooks, and allows the IN hook to call the
bpf_lwt_push_encap helper.

This patch is also the occasion to put all lwt_*_func_proto functions
together for clarity. At the moment, socks_op_func_proto is in the middle
of lwt_inout_func_proto and lwt_xmit_func_proto.
Signed-off-by: NMathieu Xhonneux <m.xhonneux@gmail.com>
Acked-by: NDavid Lebrun <dlebrun@google.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

The BPF seg6local hook should be powerful enough to enable users to
implement most of the use-cases one could think of. After some thinking,
we figured out that the following actions should be possible on a SRv6
packet, requiring 3 specific helpers :
    - bpf_lwt_seg6_store_bytes: Modify non-sensitive fields of the SRH
    - bpf_lwt_seg6_adjust_srh: Allow to grow or shrink a SRH
                               (to add/delete TLVs)
    - bpf_lwt_seg6_action: Apply some SRv6 network programming actions
                           (specifically End.X, End.T, End.B6 and
                            End.B6.Encap)

The specifications of these helpers are provided in the patch (see
include/uapi/linux/bpf.h).

The non-sensitive fields of the SRH are the following : flags, tag and
TLVs. The other fields can not be modified, to maintain the SRH
integrity. Flags, tag and TLVs can easily be modified as their validity
can be checked afterwards via seg6_validate_srh. It is not allowed to
modify the segments directly. If one wants to add segments on the path,
he should stack a new SRH using the End.B6 action via
bpf_lwt_seg6_action.

Growing, shrinking or editing TLVs via the helpers will flag the SRH as
invalid, and it will have to be re-validated before re-entering the IPv6
layer. This flag is stored in a per-CPU buffer, along with the current
header length in bytes.

Storing the SRH len in bytes in the control block is mandatory when using
bpf_lwt_seg6_adjust_srh. The Header Ext. Length field contains the SRH
len rounded to 8 bytes (a padding TLV can be inserted to ensure the 8-bytes
boundary). When adding/deleting TLVs within the BPF program, the SRH may
temporary be in an invalid state where its length cannot be rounded to 8
bytes without remainder, hence the need to store the length in bytes
separately. The caller of the BPF program can then ensure that the SRH's
final length is valid using this value. Again, a final SRH modified by a
BPF program which doesn’t respect the 8-bytes boundary will be discarded
as it will be considered as invalid.

Finally, a fourth helper is provided, bpf_lwt_push_encap, which is
available from the LWT BPF IN hook, but not from the seg6local BPF one.
This helper allows to encapsulate a Segment Routing Header (either with
a new outer IPv6 header, or by inlining it directly in the existing IPv6
header) into a non-SRv6 packet. This helper is required if we want to
offer the possibility to dynamically encapsulate a SRH for non-SRv6 packet,
as the BPF seg6local hook only works on traffic already containing a SRH.
This is the BPF equivalent of the seg6 LWT infrastructure, which achieves
the same purpose but with a static SRH per route.

These helpers require CONFIG_IPV6=y (and not =m).
Signed-off-by: NMathieu Xhonneux <m.xhonneux@gmail.com>
Acked-by: NDavid Lebrun <dlebrun@google.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Add check that egress MTU can handle packet to be forwarded. If
the MTU is less than the packet length, return 0 meaning the
packet is expected to continue up the stack for help - eg.,
fragmenting the packet or sending an ICMP.

The XDP path needs to leverage the FIB entry for an MTU on the
route spec or an exception entry for a given destination. The
skb path lets is_skb_forwardable decide if the packet can be
sent.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Currently sk_msg programs only have access to the raw data. However,
it is often useful when building policies to have the policies specific
to the socket endpoint. This allows using the socket tuple as input
into filters, etc.

This patch adds ctx access to the sock fields.
Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com>
Acked-by: NMartin KaFai Lau <kafai@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Recently during testing, I ran into the following panic:

  [  207.892422] Internal error: Accessing user space memory outside uaccess.h routines: 96000004 [#1] SMP
  [  207.901637] Modules linked in: binfmt_misc [...]
  [  207.966530] CPU: 45 PID: 2256 Comm: test_verifier Tainted: G        W         4.17.0-rc3+ #7
  [  207.974956] Hardware name: FOXCONN R2-1221R-A4/C2U4N_MB, BIOS G31FB18A 03/31/2017
  [  207.982428] pstate: 60400005 (nZCv daif +PAN -UAO)
  [  207.987214] pc : bpf_skb_load_helper_8_no_cache+0x34/0xc0
  [  207.992603] lr : 0xffff000000bdb754
  [  207.996080] sp : ffff000013703ca0
  [  207.999384] x29: ffff000013703ca0 x28: 0000000000000001
  [  208.004688] x27: 0000000000000001 x26: 0000000000000000
  [  208.009992] x25: ffff000013703ce0 x24: ffff800fb4afcb00
  [  208.015295] x23: ffff00007d2f5038 x22: ffff00007d2f5000
  [  208.020599] x21: fffffffffeff2a6f x20: 000000000000000a
  [  208.025903] x19: ffff000009578000 x18: 0000000000000a03
  [  208.031206] x17: 0000000000000000 x16: 0000000000000000
  [  208.036510] x15: 0000ffff9de83000 x14: 0000000000000000
  [  208.041813] x13: 0000000000000000 x12: 0000000000000000
  [  208.047116] x11: 0000000000000001 x10: ffff0000089e7f18
  [  208.052419] x9 : fffffffffeff2a6f x8 : 0000000000000000
  [  208.057723] x7 : 000000000000000a x6 : 00280c6160000000
  [  208.063026] x5 : 0000000000000018 x4 : 0000000000007db6
  [  208.068329] x3 : 000000000008647a x2 : 19868179b1484500
  [  208.073632] x1 : 0000000000000000 x0 : ffff000009578c08
  [  208.078938] Process test_verifier (pid: 2256, stack limit = 0x0000000049ca7974)
  [  208.086235] Call trace:
  [  208.088672]  bpf_skb_load_helper_8_no_cache+0x34/0xc0
  [  208.093713]  0xffff000000bdb754
  [  208.096845]  bpf_test_run+0x78/0xf8
  [  208.100324]  bpf_prog_test_run_skb+0x148/0x230
  [  208.104758]  sys_bpf+0x314/0x1198
  [  208.108064]  el0_svc_naked+0x30/0x34
  [  208.111632] Code: 91302260 f9400001 f9001fa1 d2800001 (29500680)
  [  208.117717] ---[ end trace 263cb8a59b5bf29f ]---

The program itself which caused this had a long jump over the whole
instruction sequence where all of the inner instructions required
heavy expansions into multiple BPF instructions. Additionally, I also
had BPF hardening enabled which requires once more rewrites of all
constant values in order to blind them. Each time we rewrite insns,
bpf_adj_branches() would need to potentially adjust branch targets
which cross the patchlet boundary to accommodate for the additional
delta. Eventually that lead to the case where the target offset could
not fit into insn->off's upper 0x7fff limit anymore where then offset
wraps around becoming negative (in s16 universe), or vice versa
depending on the jump direction.

Therefore it becomes necessary to detect and reject any such occasions
in a generic way for native eBPF and cBPF to eBPF migrations. For
the latter we can simply check bounds in the bpf_convert_filter()'s
BPF_EMIT_JMP helper macro and bail out once we surpass limits. The
bpf_patch_insn_single() for native eBPF (and cBPF to eBPF in case
of subsequent hardening) is a bit more complex in that we need to
detect such truncations before hitting the bpf_prog_realloc(). Thus
the latter is split into an extra pass to probe problematic offsets
on the original program in order to fail early. With that in place
and carefully tested I no longer hit the panic and the rewrites are
rejected properly. The above example panic I've seen on bpf-next,
though the issue itself is generic in that a guard against this issue
in bpf seems more appropriate in this case.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMartin KaFai Lau <kafai@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Sockmap is currently backed by an array and enforces keys to be
four bytes. This works well for many use cases and was originally
modeled after devmap which also uses four bytes keys. However,
this has become limiting in larger use cases where a hash would
be more appropriate. For example users may want to use the 5-tuple
of the socket as the lookup key.

To support this add hash support.
Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This patch only refactors the existing sockmap code. This will allow
much of the psock initialization code path and bpf helper codes to
work for both sockmap bpf map types that are backed by an array, the
currently supported type, and the new hash backed bpf map type
sockhash.

Most the fallout comes from three changes,

  - Pushing bpf programs into an independent structure so we
    can use it from the htab struct in the next patch.
  - Generalizing helpers to use void *key instead of the hardcoded
    u32.
  - Instead of passing map/key through the metadata we now do
    the lookup inline. This avoids storing the key in the metadata
    which will be useful when keys can be longer than 4 bytes. We
    rename the sk pointers to sk_redir at this point as well to
    avoid any confusion between the current sk pointer and the
    redirect pointer sk_redir.
Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Provide a helper for doing a FIB and neighbor lookup in the kernel
tables from an XDP program. The helper provides a fastpath for forwarding
packets. If the packet is a local delivery or for any reason is not a
simple lookup and forward, the packet continues up the stack.

If it is to be forwarded, the forwarding can be done directly if the
neighbor is already known. If the neighbor does not exist, the first
few packets go up the stack for neighbor resolution. Once resolved, the
xdp program provides the fast path.

On successful lookup the nexthop dmac, current device smac and egress
device index are returned.

The API supports IPv4, IPv6 and MPLS protocols, but only IPv4 and IPv6
are implemented in this patch. The API includes layer 4 parameters if
the XDP program chooses to do deep packet inspection to allow compare
against ACLs implemented as FIB rules.

Header rewrite is left to the XDP program.

The lookup takes 2 flags:
- BPF_FIB_LOOKUP_DIRECT to do a lookup that bypasses FIB rules and goes
  straight to the table associated with the device (expert setting for
  those looking to maximize throughput)

- BPF_FIB_LOOKUP_OUTPUT to do a lookup from the egress perspective.
  Default is an ingress lookup.

Initial performance numbers collected by Jesper, forwarded packets/sec:

       Full stack    XDP FIB lookup    XDP Direct lookup
IPv4   1,947,969       7,074,156          7,415,333
IPv6   1,728,000       6,165,504          7,262,720

These number are single CPU core forwarding on a Broadwell
E5-1650 v4 @ 3.60GHz.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

It's fairly easy for offloaded XDP programs to select the RX queue
packets go to.  We need a way of expressing this in the software.
Allow write to the rx_queue_index field of struct xdp_md for
device-bound programs.

Skip convert_ctx_access callback entirely for offloads.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This adds a small BPF helper similar to bpf_skb_load_bytes() that
is able to load relative to mac/net header offset from the skb's
linear data. Compared to bpf_skb_load_bytes(), it takes a fifth
argument namely start_header, which is either BPF_HDR_START_MAC
or BPF_HDR_START_NET. This allows for a more flexible alternative
compared to LD_ABS/LD_IND with negative offset. It's enabled for
tc BPF programs as well as sock filter program types where it's
mainly useful in reuseport programs to ease access to lower header
data.

Reference: https://lists.iovisor.org/pipermail/iovisor-dev/2017-March/000698.htmlSigned-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

The main part of this work is to finally allow removal of LD_ABS
and LD_IND from the BPF core by reimplementing them through native
eBPF instead. Both LD_ABS/LD_IND were carried over from cBPF and
keeping them around in native eBPF caused way more trouble than
actually worth it. To just list some of the security issues in
the past:

  * fdfaf64e ("x86: bpf_jit: support negative offsets")
  * 35607b02 ("sparc: bpf_jit: fix loads from negative offsets")
  * e0ee9c12 ("x86: bpf_jit: fix two bugs in eBPF JIT compiler")
  * 07aee943 ("bpf, sparc: fix usage of wrong reg for load_skb_regs after call")
  * 6d59b7db ("bpf, s390x: do not reload skb pointers in non-skb context")
  * 87338c8e ("bpf, ppc64: do not reload skb pointers in non-skb context")

For programs in native eBPF, LD_ABS/LD_IND are pretty much legacy
these days due to their limitations and more efficient/flexible
alternatives that have been developed over time such as direct
packet access. LD_ABS/LD_IND only cover 1/2/4 byte loads into a
register, the load happens in host endianness and its exception
handling can yield unexpected behavior. The latter is explained
in depth in f6b1b3bf ("bpf: fix subprog verifier bypass by
div/mod by 0 exception") with similar cases of exceptions we had.
In native eBPF more recent program types will disable LD_ABS/LD_IND
altogether through may_access_skb() in verifier, and given the
limitations in terms of exception handling, it's also disabled
in programs that use BPF to BPF calls.

In terms of cBPF, the LD_ABS/LD_IND is used in networking programs
to access packet data. It is not used in seccomp-BPF but programs
that use it for socket filtering or reuseport for demuxing with
cBPF. This is mostly relevant for applications that have not yet
migrated to native eBPF.

The main complexity and source of bugs in LD_ABS/LD_IND is coming
from their implementation in the various JITs. Most of them keep
the model around from cBPF times by implementing a fastpath written
in asm. They use typically two from the BPF program hidden CPU
registers for caching the skb's headlen (skb->len - skb->data_len)
and skb->data. Throughout the JIT phase this requires to keep track
whether LD_ABS/LD_IND are used and if so, the two registers need
to be recached each time a BPF helper would change the underlying
packet data in native eBPF case. At least in eBPF case, available
CPU registers are rare and the additional exit path out of the
asm written JIT helper makes it also inflexible since not all
parts of the JITer are in control from plain C. A LD_ABS/LD_IND
implementation in eBPF therefore allows to significantly reduce
the complexity in JITs with comparable performance results for
them, e.g.:

test_bpf             tcpdump port 22             tcpdump complex
x64      - before    15 21 10                    14 19  18
         - after      7 10 10                     7 10  15
arm64    - before    40 91 92                    40 91 151
         - after     51 64 73                    51 62 113

For cBPF we now track any usage of LD_ABS/LD_IND in bpf_convert_filter()
and cache the skb's headlen and data in the cBPF prologue. The
BPF_REG_TMP gets remapped from R8 to R2 since it's mainly just
used as a local temporary variable. This allows to shrink the
image on x86_64 also for seccomp programs slightly since mapping
to %rsi is not an ereg. In callee-saved R8 and R9 we now track
skb data and headlen, respectively. For normal prologue emission
in the JITs this does not add any extra instructions since R8, R9
are pushed to stack in any case from eBPF side. cBPF uses the
convert_bpf_ld_abs() emitter which probes the fast path inline
already and falls back to bpf_skb_load_helper_{8,16,32}() helper
relying on the cached skb data and headlen as well. R8 and R9
never need to be reloaded due to bpf_helper_changes_pkt_data()
since all skb access in cBPF is read-only. Then, for the case
of native eBPF, we use the bpf_gen_ld_abs() emitter, which calls
the bpf_skb_load_helper_{8,16,32}_no_cache() helper unconditionally,
does neither cache skb data and headlen nor has an inlined fast
path. The reason for the latter is that native eBPF does not have
any extra registers available anyway, but even if there were, it
avoids any reload of skb data and headlen in the first place.
Additionally, for the negative offsets, we provide an alternative
bpf_skb_load_bytes_relative() helper in eBPF which operates
similarly as bpf_skb_load_bytes() and allows for more flexibility.
Tested myself on x64, arm64, s390x, from Sandipan on ppc64.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Remove all eBPF tests involving LD_ABS/LD_IND from test_bpf.ko. Reason
is that the eBPF tests from test_bpf module do not go via BPF verifier
and therefore any instruction rewrites from verifier cannot take place.

Therefore, move them into test_verifier which runs out of user space,
so that verfier can rewrite LD_ABS/LD_IND internally in upcoming patches.
It will have the same effect since runtime tests are also performed from
there. This also allows to finally unexport bpf_skb_vlan_{push,pop}_proto
and keep it internal to core kernel.

Additionally, also add further cBPF LD_ABS/LD_IND test coverage into
test_bpf.ko suite.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

No change in functionality, just remove the '__' prefix and replace it
with a 'bpf_' prefix instead. We later on add a couple of more helpers
for cBPF and keeping the scheme with '__' is suboptimal there.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

This commit wires up the xskmap to XDP_SKB layer.
Signed-off-by: NBjörn Töpel <bjorn.topel@intel.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

This commit wires up the xskmap to XDP_DRV layer.
Signed-off-by: NBjörn Töpel <bjorn.topel@intel.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

The percpu metadata_dst might carry the stale ip_tunnel_info
and cause incorrect behavior.  When mixing tests using ipv4/ipv6
bpf vxlan and geneve tunnel, the ipv6 tunnel info incorrectly uses
ipv4's src ip addr as its ipv6 src address, because the previous
tunnel info does not clean up.  The patch zeros the fields in
ip_tunnel_info.
Signed-off-by: NWilliam Tu <u9012063@gmail.com>
Reported-by: NYifeng Sun <pkusunyifeng@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This commit introduces a helper which allows fetching xfrm state
parameters by eBPF programs attached to TC.

Prototype:
bpf_skb_get_xfrm_state(skb, index, xfrm_state, size, flags)

skb: pointer to skb
index: the index in the skb xfrm_state secpath array
xfrm_state: pointer to 'struct bpf_xfrm_state'
size: size of 'struct bpf_xfrm_state'
flags: reserved for future extensions

The helper returns 0 on success. Non zero if no xfrm state at the index
is found - or non exists at all.

struct bpf_xfrm_state currently includes the SPI, peer IPv4/IPv6
address and the reqid; it can be further extended by adding elements to
its end - indicating the populated fields by the 'size' argument -
keeping backwards compatibility.

Typical usage:

struct bpf_xfrm_state x = {};
bpf_skb_get_xfrm_state(skb, 0, &x, sizeof(x), 0);
...
Signed-off-by: NEyal Birger <eyal.birger@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Commit 6dfb970d ("xdp: avoid leaking info stored in frame data on
page reuse") tried to allow user/bpf_prog to (re)use area used by
xdp_frame (stored in frame headroom), by memset clearing area when
bpf_xdp_adjust_head give bpf_prog access to headroom area.

The mentioned commit had two bugs. (1) Didn't take bpf_xdp_adjust_meta
into account. (2) a combination of bpf_xdp_adjust_head calls, where
xdp->data is moved into xdp_frame section, can cause clearing
xdp_frame area again for area previously granted to bpf_prog.

After discussions with Daniel, we choose to implement a simpler
solution to the problem, which is to reserve the headroom used by
xdp_frame info.

This also avoids the situation where bpf_prog is allowed to adjust/add
headers, and then XDP_REDIRECT later drops the packet due to lack of
headroom for the xdp_frame.  This would likely confuse the end-user.

Fixes: 6dfb970d ("xdp: avoid leaking info stored in frame data on page reuse")
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Adding new bpf helper which would allow us to manipulate
xdp's data_end pointer, and allow us to reduce packet's size
indended use case: to generate ICMP messages from XDP context,
where such message would contain truncated original packet.
Signed-off-by: NNikita V. Shirokov <tehnerd@tehnerd.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

The bpf infrastructure and verifier goes to great length to avoid
bpf progs leaking kernel (pointer) info.

For queueing an xdp_buff via XDP_REDIRECT, xdp_frame info stores
kernel info (incl pointers) in top part of frame data (xdp->data_hard_start).
Checks are in place to assure enough headroom is available for this.

This info is not cleared, and if the frame is reused, then a
malicious user could use bpf_xdp_adjust_head helper to move
xdp->data into this area.  Thus, making this area readable.

This is not super critical as XDP progs requires root or
CAP_SYS_ADMIN, which are privileged enough for such info.  An
effort (is underway) towards moving networking bpf hooks to the
lesser privileged mode CAP_NET_ADMIN, where leaking such info
should be avoided.  Thus, this patch to clear the info when
needed.
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Changing API ndo_xdp_xmit to take a struct xdp_frame instead of struct
xdp_buff.  This brings xdp_return_frame and ndp_xdp_xmit in sync.

This builds towards changing the API further to become a bulk API,
because xdp_buff is not a queue-able object while xdp_frame is.

V4: Adjust for commit 59655a5b ("tuntap: XDP_TX can use native XDP")
V7: Adjust for commit d9314c47 ("i40e: add support for XDP_REDIRECT")
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

"Post-hooks" are hooks that are called right before returning from
sys_bind. At this time IP and port are already allocated and no further
changes to `struct sock` can happen before returning from sys_bind but
BPF program has a chance to inspect the socket and change sys_bind
result.

Specifically it can e.g. inspect what port was allocated and if it
doesn't satisfy some policy, BPF program can force sys_bind to fail and
return EPERM to user.

Another example of usage is recording the IP:port pair to some map to
use it in later calls to sys_connect. E.g. if some TCP server inside
cgroup was bound to some IP:port_n, it can be recorded to a map. And
later when some TCP client inside same cgroup is trying to connect to
127.0.0.1:port_n, BPF hook for sys_connect can override the destination
and connect application to IP:port_n instead of 127.0.0.1:port_n. That
helps forcing all applications inside a cgroup to use desired IP and not
break those applications if they e.g. use localhost to communicate
between each other.

== Implementation details ==

Post-hooks are implemented as two new attach types
`BPF_CGROUP_INET4_POST_BIND` and `BPF_CGROUP_INET6_POST_BIND` for
existing prog type `BPF_PROG_TYPE_CGROUP_SOCK`.

Separate attach types for IPv4 and IPv6 are introduced to avoid access
to IPv6 field in `struct sock` from `inet_bind()` and to IPv4 field from
`inet6_bind()` since those fields might not make sense in such cases.
Signed-off-by: NAndrey Ignatov <rdna@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

== The problem ==

See description of the problem in the initial patch of this patch set.

== The solution ==

The patch provides much more reliable in-kernel solution for the 2nd
part of the problem: making outgoing connecttion from desired IP.

It adds new attach types `BPF_CGROUP_INET4_CONNECT` and
`BPF_CGROUP_INET6_CONNECT` for program type
`BPF_PROG_TYPE_CGROUP_SOCK_ADDR` that can be used to override both
source and destination of a connection at connect(2) time.

Local end of connection can be bound to desired IP using newly
introduced BPF-helper `bpf_bind()`. It allows to bind to only IP though,
and doesn't support binding to port, i.e. leverages
`IP_BIND_ADDRESS_NO_PORT` socket option. There are two reasons for this:
* looking for a free port is expensive and can affect performance
  significantly;
* there is no use-case for port.

As for remote end (`struct sockaddr *` passed by user), both parts of it
can be overridden, remote IP and remote port. It's useful if an
application inside cgroup wants to connect to another application inside
same cgroup or to itself, but knows nothing about IP assigned to the
cgroup.

Support is added for IPv4 and IPv6, for TCP and UDP.

IPv4 and IPv6 have separate attach types for same reason as sys_bind
hooks, i.e. to prevent reading from / writing to e.g. user_ip6 fields
when user passes sockaddr_in since it'd be out-of-bound.

== Implementation notes ==

The patch introduces new field in `struct proto`: `pre_connect` that is
a pointer to a function with same signature as `connect` but is called
before it. The reason is in some cases BPF hooks should be called way
before control is passed to `sk->sk_prot->connect`. Specifically
`inet_dgram_connect` autobinds socket before calling
`sk->sk_prot->connect` and there is no way to call `bpf_bind()` from
hooks from e.g. `ip4_datagram_connect` or `ip6_datagram_connect` since
it'd cause double-bind. On the other hand `proto.pre_connect` provides a
flexible way to add BPF hooks for connect only for necessary `proto` and
call them at desired time before `connect`. Since `bpf_bind()` is
allowed to bind only to IP and autobind in `inet_dgram_connect` binds
only port there is no chance of double-bind.

bpf_bind() sets `force_bind_address_no_port` to bind to only IP despite
of value of `bind_address_no_port` socket field.

bpf_bind() sets `with_lock` to `false` when calling to __inet_bind()
and __inet6_bind() since all call-sites, where bpf_bind() is called,
already hold socket lock.
Signed-off-by: NAndrey Ignatov <rdna@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

== The problem ==

There is a use-case when all processes inside a cgroup should use one
single IP address on a host that has multiple IP configured.  Those
processes should use the IP for both ingress and egress, for TCP and UDP
traffic. So TCP/UDP servers should be bound to that IP to accept
incoming connections on it, and TCP/UDP clients should make outgoing
connections from that IP. It should not require changing application
code since it's often not possible.

Currently it's solved by intercepting glibc wrappers around syscalls
such as `bind(2)` and `connect(2)`. It's done by a shared library that
is preloaded for every process in a cgroup so that whenever TCP/UDP
server calls `bind(2)`, the library replaces IP in sockaddr before
passing arguments to syscall. When application calls `connect(2)` the
library transparently binds the local end of connection to that IP
(`bind(2)` with `IP_BIND_ADDRESS_NO_PORT` to avoid performance penalty).

Shared library approach is fragile though, e.g.:
* some applications clear env vars (incl. `LD_PRELOAD`);
* `/etc/ld.so.preload` doesn't help since some applications are linked
  with option `-z nodefaultlib`;
* other applications don't use glibc and there is nothing to intercept.

== The solution ==

The patch provides much more reliable in-kernel solution for the 1st
part of the problem: binding TCP/UDP servers on desired IP. It does not
depend on application environment and implementation details (whether
glibc is used or not).

It adds new eBPF program type `BPF_PROG_TYPE_CGROUP_SOCK_ADDR` and
attach types `BPF_CGROUP_INET4_BIND` and `BPF_CGROUP_INET6_BIND`
(similar to already existing `BPF_CGROUP_INET_SOCK_CREATE`).

The new program type is intended to be used with sockets (`struct sock`)
in a cgroup and provided by user `struct sockaddr`. Pointers to both of
them are parts of the context passed to programs of newly added types.

The new attach types provides hooks in `bind(2)` system call for both
IPv4 and IPv6 so that one can write a program to override IP addresses
and ports user program tries to bind to and apply such a program for
whole cgroup.

== Implementation notes ==

[1]
Separate attach types for `AF_INET` and `AF_INET6` are added
intentionally to prevent reading/writing to offsets that don't make
sense for corresponding socket family. E.g. if user passes `sockaddr_in`
it doesn't make sense to read from / write to `user_ip6[]` context
fields.

[2]
The write access to `struct bpf_sock_addr_kern` is implemented using
special field as an additional "register".

There are just two registers in `sock_addr_convert_ctx_access`: `src`
with value to write and `dst` with pointer to context that can't be
changed not to break later instructions. But the fields, allowed to
write to, are not available directly and to access them address of
corresponding pointer has to be loaded first. To get additional register
the 1st not used by `src` and `dst` one is taken, its content is saved
to `bpf_sock_addr_kern.tmp_reg`, then the register is used to load
address of pointer field, and finally the register's content is restored
from the temporary field after writing `src` value.
Signed-off-by: NAndrey Ignatov <rdna@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

== The problem ==

There are use-cases when a program of some type can be attached to
multiple attach points and those attach points must have different
permissions to access context or to call helpers.

E.g. context structure may have fields for both IPv4 and IPv6 but it
doesn't make sense to read from / write to IPv6 field when attach point
is somewhere in IPv4 stack.

Same applies to BPF-helpers: it may make sense to call some helper from
some attach point, but not from other for same prog type.

== The solution ==

Introduce `expected_attach_type` field in in `struct bpf_attr` for
`BPF_PROG_LOAD` command. If scenario described in "The problem" section
is the case for some prog type, the field will be checked twice:

1) At load time prog type is checked to see if attach type for it must
   be known to validate program permissions correctly. Prog will be
   rejected with EINVAL if it's the case and `expected_attach_type` is
   not specified or has invalid value.

2) At attach time `attach_type` is compared with `expected_attach_type`,
   if prog type requires to have one, and, if they differ, attach will
   be rejected with EINVAL.

The `expected_attach_type` is now available as part of `struct bpf_prog`
in both `bpf_verifier_ops->is_valid_access()` and
`bpf_verifier_ops->get_func_proto()` () and can be used to check context
accesses and calls to helpers correspondingly.

Initially the idea was discussed by Alexei Starovoitov <ast@fb.com> and
Daniel Borkmann <daniel@iogearbox.net> here:
https://marc.info/?l=linux-netdev&m=152107378717201&w=2Signed-off-by: NAndrey Ignatov <rdna@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>