The A-MSDU data needs to be stored per-link and aggregated into a single
value for the station. Add a new struct ieee_80211_sta_aggregates in
order to store this data and a new function
ieee80211_sta_recalc_aggregates to update the current data for the STA.

Note that in the non MLO case the pointer in ieee80211_sta will directly
reference the data in deflink.agg, which means that recalculation may be
skipped in that case.
Signed-off-by: NBenjamin Berg <benjamin.berg@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

On secondary MLO links, I forgot to set the beacon interval
and DTIM period, fix that.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Add macros (and an exported function) to allow checking some
link RCU protected accesses that are happening in callbacks
from mac80211 and are thus under the correct lock.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

In hwsim we now track when we receive NDP (or other frames
carrying a PM bit) to see if a link should be active, but
then of course we also need to transmit NDPs to at least
set a link to inactive when we deacivate it. Implement that
as well as sending an NDP when we activate a link, which
allows receiving frames before transmitting any.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Add a link_id parameter to ieee80211_nullfunc_get() to be
able to obtain a correctly addressed frame.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Track the powersave bit on frames where we can look up
the STA by link addresses and set the links active or
inactive accordingly, and use this information to TX
only on links that are actually active in the peer.

Note that this doesn't implement powersave fully so
if no link is active things will not work right.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

With the link activation handling in mac80211, skip
any inactive links on TX.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Add a new API function ieee80211_find_sta_by_link_addrs()
that looks up the STA and link ID based on interface and
station link addresses.

We're going to use it for mac80211-hwsim to track on the
AP side which links are active.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

In order to let the driver select active links and properly
make multi-link connections, as a first step isolate the
driver from inactive links, and set the active links to be
only the association link for client-side interfaces. For
AP side nothing changes since APs always have to have all
their links active.

To simplify things, update the for_each_sta_active_link()
API to include the appropriate vif pointer.

This also implies not allocating a chanctx for an inactive
link, which requires a few more changes.

Since we now no longer try to program multiple links to the
driver, remove the check in the MLME code.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The SMPS power save mode needs to be per-link rather than being shared
for all links. As such, move it into struct ieee80211_link_sta.
Signed-off-by: NBenjamin Berg <benjamin.berg@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Use rx->link_sta everywhere instead of accessing the default link.
Signed-off-by: NBenjamin Berg <benjamin.berg@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Now that we have a link_sta pointer in the rx struct
we also need to fill it in all the cases. It didn't
matter so much until now as we weren't using it, but
the code should really be able to assume that if the
rx.sta is set, so is rx.link_sta.

Fixes: ccdde7c7 ("wifi: mac80211: properly implement MLO key handling")
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Merge wireless/main to get the rx.link fix, which is needed
for further work in this area.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Merge tag 'wireless-next-2022-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Johannes Berg says:

====================
drivers
 - rtw89: large update across the map, e.g. coex, pci(e), etc.
 - ath9k: uninit memory read fix
 - ath10k: small peer map fix and a WCN3990 device fix
 - wfx: underflow

stack
 - the "change MAC address while IFF_UP" change from James
   we discussed
 - more MLO work, including a set of fixes for the previous
   code, now that we have more code we can exercise it more
 - prevent some features with MLO that aren't ready yet
   (AP_VLAN and 4-address connections)
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In netlink RX, now that we can actually have multiple
channel contexts for MLO, things don't work well as we
only keep a single pointer, and then on link switching
we might NULL it, and hit the return if the channel is
NULL.

However, we already use mac80211_hwsim_tx_iter() which
deals with all this, so remove the test and adjust the
remaining code a bit.

This then means we no longer use the chanctx pointer,
so remove it as well.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Currently, other paths calling drv_sta_state() hold the mutex
and therefore drivers can assume that, and look at links with
that protection. Fix that for the reconfig path as well; to
do it more easily use ieee80211_reconfig_stations() for the
AP/AP_VLAN station reconfig as well.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Add an MLD address attribute to BSS entries that the interface
is currently associated with to help userspace figure out what's
going on.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Refactor the code to apply QoS settings to the driver so
we can call it on link switch.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Catch the bugs fixed in mac80211 by the previous commits
and warn if an invalid address is added (or removed).
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

When we stop a not-yet-started scan, we erroneously call
into the driver, causing a sequence of sw_scan_start()
followed by sw_scan_complete() twice. This will cause a
warning in hwsim with next in line commit that validates
the address passed to wmediumd/virtio. Fix this by doing
the calls only if we were actually scanning.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Right now, we assign the link address only after we add
the link to the driver, which is quite obviously wrong.
It happens to work in many cases because it gets updated
immediately, and then link_conf updates may update it,
but it's clearly not really right.

Set the link address during ieee80211_mgd_setup_link()
so it's set before telling the driver about the link.

Fixes: 81151ce4 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

We probably should've done that originally, we already have
about 300 lines of code there, and will add more. Move all
the link code we wrote to a new file.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Refactor some common RX functionality between the netlink
and non-netlink paths, adding the special hwsim TLV (if
compiled) also in the netlink path.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Just as an additional check that mac80211 isn't doing
anything strange, add a check of the STA magic (which
gets assigned when the station is added, and cleared
when the station is removed).
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

We don't need the sdata argument, and it doesn't make any
sense for a direct conversion from one value to another,
so just remove the argument
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Now that we have proper multicast TX in mac80211, there's
no longer a need to fake something here.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Return value from rdev_set_mcast_rate() directly instead of
taking this in another redundant variable.
Reported-by: NZeal Robot <zealci@zte.com.cn>
Signed-off-by: NJinpeng Cui <cui.jinpeng2@zte.com.cn>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Adds support in mac80211 for NL80211_EXT_FEATURE_POWERED_ADDR_CHANGE.
The motivation behind this functionality is to fix limitations of
address randomization on frequencies which are disallowed in world
roaming.

The way things work now, if a client wants to randomize their address
per-connection it must power down the device, change the MAC, and
power back up. Here lies a problem since powering down the device
may result in frequencies being disabled (until the regdom is set).
If the desired BSS is on one such frequency the client is unable to
connect once the phy is powered again.

For mac80211 based devices changing the MAC while powered is possible
but currently disallowed (-EBUSY). This patch adds some logic to
allow a MAC change while powered by removing the interface, changing
the MAC, and adding it again. mac80211 will advertise support for
this feature so userspace can determine the best course of action e.g.
disallow address randomization on certain frequencies if not
supported.

There are certain limitations put on this which simplify the logic:
 - No active connection
 - No offchannel work, including scanning.
Signed-off-by: NJames Prestwood <prestwoj@gmail.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Add a new extended feature bit signifying that the wireless hardware
supports changing the MAC address while the underlying net_device is
powered. Note that this has a different meaning from
IFF_LIVE_ADDR_CHANGE as additional restrictions might be imposed by
the hardware, such as:

 - No connection is active on this interface, carrier is off
 - No scan is in progress
 - No offchannel operations are in progress
Signed-off-by: NJames Prestwood <prestwoj@gmail.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

We haven't tried this yet, and it's not very likely to
work well right now, so for now disable 4-addr use on
interfaces that are MLDs.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20220902161143.f2e4cc2efaa1.I5924e8fb44a2d098b676f5711b36bbc1b1bd68e2@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Do not allow VLANs to be added to AP interfaces that are
MLDs, this isn't going to work because the link structs
aren't propagated to the VLAN interfaces yet.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20220902161144.8c88531146e9.If2ef9a3b138d4f16ed2fda91c852da156bdf5e4d@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

We sometimes copy all the addresses from the 802.11 header
for the AAD, which may cause complaints from fortify checks.
Use struct_group() to avoid the compiler warnings/errors.

Change-Id: Ic3ea389105e7813b22095b295079eecdabde5045
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

An invalid packet with a length shorter than the specified length in the
netlink header can lead to use-after-frees and slab-out-of-bounds in the
processing of the netlink attributes, such as the following:

  BUG: KASAN: slab-out-of-bounds in __nla_validate_parse+0x1258/0x2010
  Read of size 2 at addr ffff88800ac7952c by task kworker/0:1/12

  Workqueue: events hwsim_virtio_rx_work
  Call Trace:
   <TASK>
   dump_stack_lvl+0x45/0x5d
   print_report.cold+0x5e/0x5e5
   kasan_report+0xb1/0x1c0
   __nla_validate_parse+0x1258/0x2010
   __nla_parse+0x22/0x30
   hwsim_virtio_handle_cmd.isra.0+0x13f/0x2d0
   hwsim_virtio_rx_work+0x1b2/0x370
   process_one_work+0x8df/0x1530
   worker_thread+0x575/0x11a0
   kthread+0x29d/0x340
   ret_from_fork+0x22/0x30
 </TASK>

Discarding packets with an invalid length solves this.
Therefore, skb->len must be set at reception.

Change-Id: Ieaeb9a4c62d3beede274881a7c2722c6c6f477b6
Signed-off-by: NSoenke Huster <soenke.huster@eknoes.de>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

If we hit an authentication or association timeout, we only
release the chanctx for the deflink, and the other link(s)
are released later by ieee80211_vif_set_links(), but we're
not locking this correctly.

Fix the locking here while releasing the channels and links.

Change-Id: I9e08c1a5434592bdc75253c1abfa6c788f9f39b1
Fixes: 81151ce4 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

In the prep_channel error case we didn't release the deflink
channel leaving it to be left around. Fix that.

Change-Id: If0dfd748125ec46a31fc6045a480dc28e03723d2
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The rx data link pointer isn't set from the RX aggregation timer,
resulting in a later warning. Fix that by setting it to the first
valid link for now, with a FIXME to worry about statistics later,
it's not very important since it's just the timeout case.
Reported-by: NHans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/498d714c-76be-9d04-26db-a1206878de5e@redhat.com
Fixes: 56057da4 ("wifi: mac80211: rx: track link in RX data")
Signed-off-by: NMukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Zhengchao Shao says:

====================
net: sched: remove redundant resource cleanup when init() fails

qdisc_create() calls .init() to initialize qdisc. If the initialization
fails, qdisc_create() will call .destroy() to release resources.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If htb_init() fails, qdisc_create() invokes htb_destroy() to clear
resources. Therefore, remove redundant resource cleanup in htb_init().
Signed-off-by: NZhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If fq_codel_init() fails, qdisc_create() invokes fq_codel_destroy() to
clear resources. Therefore, remove redundant resource cleanup in
fq_codel_init().
Signed-off-by: NZhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current driver support stop mode by calling machine api.
The patch add dts support to set GPR register for stop request.

imx8mq enter stop/exit stop mode by setting GPR bit, which can
be accessed by A core.
imx8qm enter stop/exit stop mode by calling IMX_SC ipc APIs that
communicate with M core ipc service, and the M core set the related
GPR bit at last.
Signed-off-by: NWei Fang <wei.fang@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>