Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 16 7月, 2014 8 次提交
    • H
      cxgb4/iw_cxgb4: use firmware ord/ird resource limits · 4c2c5763
      由 Hariprasad Shenai 提交于 
      Advertise a larger max read queue depth for qps, and gather the resource limits
from fw and use them to avoid exhaustinq all the resources.

Design:

cxgb4:

Obtain the max_ordird_qp and max_ird_adapter device params from FW
at init time and pass them up to the ULDs when they attach.  If these
parameters are not available, due to older firmware, then hard-code
the values based on the known values for older firmware.
iw_cxgb4:

Fix the c4iw_query_device() to report these correct values based on
adapter parameters.  ibv_query_device() will always return:

max_qp_rd_atom = max_qp_init_rd_atom = min(module_max, max_ordird_qp)
max_res_rd_atom = max_ird_adapter

Bump up the per qp max module option to 32, allowing it to be increased
by the user up to the device max of max_ordird_qp.  32 seems to be
sufficient to maximize throughput for streaming read benchmarks.

Fail connection setup if the negotiated IRD exhausts the available
adapter ird resources.  So the driver will track the amount of ird
resource in use and not send an RI_WR/INIT to FW that would reduce the
available ird resources below zero.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4c2c5763
    • H
      iw_cxgb4: Detect Ing. Padding Boundary at run-time · 04e10e21
      由 Hariprasad Shenai 提交于 
      Updates iw_cxgb4 to determine the Ingress Padding Boundary from
cxgb4_lld_info, and take subsequent actions.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      04e10e21
    • C
      tcp: Remove unnecessary arg from tcp_enter_cwr and tcp_init_cwnd_reduction · 5ee2c941
      由 Christoph Paasch 提交于 
      Since Yuchung's 9b44190d (tcp: refactor F-RTO), tcp_enter_cwr is always
called with set_ssthresh = 1. Thus, we can remove this argument from
tcp_enter_cwr. Further, as we remove this one, tcp_init_cwnd_reduction
is then always called with set_ssthresh = true, and so we can get rid of
this argument as well.

Cc: Yuchung Cheng <ycheng@google.com>
Signed-off-by: NChristoph Paasch <christoph.paasch@uclouvain.be>
Acked-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      5ee2c941
    • T
      net: rtnetlink - make create_link take name_assign_type · 5517750f
      由 Tom Gundersen 提交于 
      This passes down NET_NAME_USER (or NET_NAME_ENUM) to alloc_netdev(),
for any device created over rtnetlink.

v9: restore reverse-christmas-tree order of local variables
Signed-off-by: NTom Gundersen <teg@jklm.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      5517750f
    • T
      net: set name_assign_type in alloc_netdev() · c835a677
      由 Tom Gundersen 提交于 
      Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert
all users to pass NET_NAME_UNKNOWN.

Coccinelle patch:

@@
expression sizeof_priv, name, setup, txqs, rxqs, count;
@@

(
-alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs)
+alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs)
|
-alloc_netdev_mq(sizeof_priv, name, setup, count)
+alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count)
|
-alloc_netdev(sizeof_priv, name, setup)
+alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup)
)

v9: move comments here from the wrong commit
Signed-off-by: NTom Gundersen <teg@jklm.no>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c835a677
    • T
      net: set name assign type for renamed devices · 238fa362
      由 Tom Gundersen 提交于 
      Based on a patch from David Herrmann.

This is the only place devices can be renamed.

v9: restore revers-christmas-tree order of local variables
Signed-off-by: NTom Gundersen <teg@jklm.no>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      238fa362
    • T
      net: add name_assign_type netdev attribute · 685343fc
      由 Tom Gundersen 提交于 
      Based on a patch by David Herrmann.

The name_assign_type attribute gives hints where the interface name of a
given net-device comes from. These values are currently defined:
  NET_NAME_ENUM:
    The ifname is provided by the kernel with an enumerated
    suffix, typically based on order of discovery. Names may
    be reused and unpredictable.
  NET_NAME_PREDICTABLE:
    The ifname has been assigned by the kernel in a predictable way
    that is guaranteed to avoid reuse and always be the same for a
    given device. Examples include statically created devices like
    the loopback device and names deduced from hardware properties
    (including being given explicitly by the firmware). Names
    depending on the order of discovery, or in any other way on the
    existence of other devices, must not be marked as PREDICTABLE.
  NET_NAME_USER:
    The ifname was provided by user-space during net-device setup.
  NET_NAME_RENAMED:
    The net-device has been renamed from userspace. Once this type is set,
    it cannot change again.
  NET_NAME_UNKNOWN:
    This is an internal placeholder to indicate that we yet haven't yet
    categorized the name. It will not be exposed to userspace, rather
    -EINVAL is returned.

The aim of these patches is to improve user-space renaming of interfaces. As
a general rule, userspace must rename interfaces to guarantee that names stay
the same every time a given piece of hardware appears (at boot, or when
attaching it). However, there are several situations where userspace should
not perform the renaming, and that depends on both the policy of the local
admin, but crucially also on the nature of the current interface name.

If an interface was created in repsonse to a userspace request, and userspace
already provided a name, we most probably want to leave that name alone. The
main instance of this is wifi-P2P devices created over nl80211, which currently
have a long-standing bug where they are getting renamed by udev. We label such
names NET_NAME_USER.

If an interface, unbeknown to us, has already been renamed from userspace, we
most probably want to leave also that alone. This will typically happen when
third-party plugins (for instance to udev, but the interface is generic so could
be from anywhere) renames the interface without informing udev about it. A
typical situation is when you switch root from an installer or an initrd to the
real system and the new instance of udev does not know what happened before
the switch. These types of problems have caused repeated issues in the past. To
solve this, once an interface has been renamed, its name is labelled
NET_NAME_RENAMED.

In many cases, the kernel is actually able to name interfaces in such a
way that there is no need for userspace to rename them. This is the case when
the enumeration order of devices, or in fact any other (non-parent) device on
the system, can not influence the name of the interface. Examples include
statically created devices, or any naming schemes based on hardware properties
of the interface. In this case the admin may prefer to use the kernel-provided
names, and to make that possible we label such names NET_NAME_PREDICTABLE.
We want the kernel to have tho possibilty of performing predictable interface
naming itself (and exposing to userspace that it has), as the information
necessary for a proper naming scheme for a certain class of devices may not
be exposed to userspace.

The case where renaming is almost certainly desired, is when the kernel has
given the interface a name using global device enumeration based on order of
discovery (ethX, wlanY, etc). These naming schemes are labelled NET_NAME_ENUM.

Lastly, a fallback is left as NET_NAME_UNKNOWN, to indicate that a driver has
not yet been ported. This is mostly useful as a transitionary measure, allowing
us to label the various naming schemes bit by bit.

v8: minor documentation fixes
v9: move comment to the right commit
Signed-off-by: NTom Gundersen <teg@jklm.no>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Reviewed-by: NKay Sievers <kay@vrfy.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      685343fc
    • E
      net: mvpp2: Fix a typo in the license · c634099d
      由 Ezequiel Garcia 提交于 
      The proper string for this license is "GPL v2", instead of "GPLv2".
This commit fixes that.
Reported-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c634099d
  3. 15 7月, 2014 15 次提交
  5. 14 7月, 2014 12 次提交
  7. 12 7月, 2014 5 次提交