Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 16 12月, 2011 3 次提交
    • K
      ARM: OMAP: hwmod data: Add support for AM35xx UART4/ttyO3 · 4bf90f65
      由 Kyle Manna 提交于 
      Add hwmod support to enable access to UART4 of the AM35xx series of
chips.  The UART4 device referenced from the TRM will show up as ttyO3.

This was tested on an AM3505.
Signed-off-by: NKyle Manna <kyle.manna@fuel7.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
      4bf90f65
    • A
      ARM: OMAP: hwmod data: fix the panic on Nokia RM-680 during boot · 91a36bdb
      由 Aaro Koskinen 提交于 
      Booting the Linux kernel on Nokia RM-680 board has been broken since
2.6.39 due to the following:

[    0.217193] omap_hwmod: timer12: enabling
[    0.221435] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa304010
[    0.229431] Internal error: : 1028 [#1] SMP
[    0.233825] Modules linked in:
[    0.237060] CPU: 0    Not tainted  (3.2.0-rc4-dirty #46)
[    0.242645] PC is at _update_sysc_cache+0x2c/0x7c
[    0.247589] LR is at _enable+0x1b0/0x2d8
[    0.251708] pc : [<c0026108>]    lr : [<c0026df4>]    psr: 40000013
[    0.251708] sp : ef831f40  ip : ef82f380  fp : c06ac0c0
[    0.263702] r10: 00000000  r9 : c05dfb2c  r8 : ef830000
[    0.269165] r7 : c0027494  r6 : 00000000  r5 : 00000000  r4 : c06608b0
[    0.276000] r3 : fa304000  r2 : 00000010  r1 : c0661e28  r0 : c06608b0
[    0.282806] Flags: nZcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
[    0.290405] Control: 10c5387d  Table: 80004019  DAC: 00000017
[    0.296417] Process swapper (pid: 1, stack limit = 0xef8302f8)
[    0.302520] Stack: (0xef831f40 to 0xef832000)
[    0.307098] 1f40: c06608b0 c0026df4 c06ad094 c0035120 00000001 c06608b0 00000000 c0027530
[    0.315612] 1f60: c0027604 ef830000 c05dfb2c c06608b0 c0642ac0 c0025bf0 c0621234 c062120c
[    0.324127] 1f80: c0621738 00000013 ef830000 c05dfb6c c0621234 c0008688 c062c880 c009eadc
[    0.332641] 1fa0: 0000005f 00000000 c0621738 35390013 00000000 00000000 00000000 0000019a
[    0.341156] 1fc0: c0681cf4 c0621234 c062120c c0621738 00000013 00000000 00000000 00000000
[    0.349670] 1fe0: 00000000 c05d5298 00000000 c05d5200 c0014fa8 c0014fa8 ffff0000 ffff0000
[    0.358184] [<c0026108>] (_update_sysc_cache+0x2c/0x7c) from [<c0026df4>] (_enable+0x1b0/0x2d8)
[    0.367248] [<c0026df4>] (_enable+0x1b0/0x2d8) from [<c0027530>] (_setup+0x9c/0x170)
[    0.375335] [<c0027530>] (_setup+0x9c/0x170) from [<c0025bf0>] (omap_hwmod_for_each+0x38/0x58)
[    0.384307] [<c0025bf0>] (omap_hwmod_for_each+0x38/0x58) from [<c05dfb6c>] (omap_hwmod_setup_all+0x40/0xa0)
[    0.394409] [<c05dfb6c>] (omap_hwmod_setup_all+0x40/0xa0) from [<c0008688>] (do_one_initcall+0x34/0x180)
[    0.404296] [<c0008688>] (do_one_initcall+0x34/0x180) from [<c05d5298>] (kernel_init+0x98/0x144)
[    0.413452] [<c05d5298>] (kernel_init+0x98/0x144) from [<c0014fa8>] (kernel_thread_exit+0x0/0x8)
[    0.422576] Code: e3130c01 1590304c 0590304c 119320b2 (07932002)
[    0.429046] ---[ end trace 1b75b31a2719ed1c ]---
[    0.433959] Kernel panic - not syncing: Attempted to kill init!

Timer 12 is not necessarily available on non-GP devices (see e.g.
http://marc.info/?l=linux-omap&m=129433066521102&w=2), so it should be
registered only on GP OMAPs. With this change it's again possible to
boot RM-680 into the shell. Tested with 3.2-rc4.
Signed-off-by: NAaro Koskinen <aaro.koskinen@nokia.com>
[paul@pwsan.com: changed subject line]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
      91a36bdb
    • F
      ARM: OMAP: hwmod data: fix iva and mailbox hwmods for OMAP 3 · 7c17c770
      由 Felipe Contreras 提交于 
      Seems the commit 7e89098c was overly aggressive in adding iva and mailbox
hwmods so now they are registered twice.

------------[ cut here ]------------
WARNING: at arch/arm/mach-omap2/omap_hwmod.c:1959 omap_hwmod_register+0x104/0x12c()
omap_hwmod: iva: _register returned -22
Modules linked in:
[<c0012aa4>] (unwind_backtrace+0x0/0xec) from [<c002f970>] (warn_slowpath_common+0x4c/0x64)
[<c002f970>] (warn_slowpath_common+0x4c/0x64) from [<c002fa08>] (warn_slowpath_fmt+0x2c/0x3c)
[<c002fa08>] (warn_slowpath_fmt+0x2c/0x3c) from [<c02fdb4c>] (omap_hwmod_register+0x104/0x12c)
[<c02fdb4c>] (omap_hwmod_register+0x104/0x12c) from [<c02fbb44>] (omap3_init_early+0x1c/0x28)
[<c02fbb44>] (omap3_init_early+0x1c/0x28) from [<c02f9580>] (setup_arch+0x6b8/0x7a4)
[<c02f9580>] (setup_arch+0x6b8/0x7a4) from [<c02f754c>] (start_kernel+0x6c/0x264)
[<c02f754c>] (start_kernel+0x6c/0x264) from [<80008040>] (0x80008040)
---[ end trace 1b75b31a2719ed1c ]---
------------[ cut here ]------------
WARNING: at arch/arm/mach-omap2/omap_hwmod.c:1959 omap_hwmod_register+0x104/0x12c()
omap_hwmod: mailbox: _register returned -22
Modules linked in:
[<c0012aa4>] (unwind_backtrace+0x0/0xec) from [<c002f970>] (warn_slowpath_common+0x4c/0x64)
[<c002f970>] (warn_slowpath_common+0x4c/0x64) from [<c002fa08>] (warn_slowpath_fmt+0x2c/0x3c)
[<c002fa08>] (warn_slowpath_fmt+0x2c/0x3c) from [<c02fdb4c>] (omap_hwmod_register+0x104/0x12c)
[<c02fdb4c>] (omap_hwmod_register+0x104/0x12c) from [<c02fbb44>] (omap3_init_early+0x1c/0x28)
[<c02fbb44>] (omap3_init_early+0x1c/0x28) from [<c02f9580>] (setup_arch+0x6b8/0x7a4)
[<c02f9580>] (setup_arch+0x6b8/0x7a4) from [<c02f754c>] (start_kernel+0x6c/0x264)
[<c02f754c>] (start_kernel+0x6c/0x264) from [<80008040>] (0x80008040)
---[ end trace 1b75b31a2719ed1d ]---
Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
      7c17c770
  3. 09 12月, 2011 3 次提交
    • Y
      thp: add compound tail page _mapcount when mapped · b6999b19
      由 Youquan Song 提交于 
      With the 3.2-rc kernel, IOMMU 2M pages in KVM works.  But when I tried
to use IOMMU 1GB pages in KVM, I encountered an oops and the 1GB page
failed to be used.

The root cause is that 1GB page allocation calls gup_huge_pud() while 2M
page calls gup_huge_pmd.  If compound pages are used and the page is a
tail page, gup_huge_pmd() increases _mapcount to record tail page are
mapped while gup_huge_pud does not do that.

So when the mapped page is relesed, it will result in kernel oops
because the page is not marked mapped.

This patch add tail process for compound page in 1GB huge page which
keeps the same process as 2M page.

Reproduce like:
1. Add grub boot option: hugepagesz=1G hugepages=8
2. mount -t hugetlbfs -o pagesize=1G hugetlbfs /dev/hugepages
3. qemu-kvm -m 2048 -hda os-kvm.img -cpu kvm64 -smp 4 -mem-path /dev/hugepages
	-net none -device pci-assign,host=07:00.1

  kernel BUG at mm/swap.c:114!
  invalid opcode: 0000 [#1] SMP
  Call Trace:
    put_page+0x15/0x37
    kvm_release_pfn_clean+0x31/0x36
    kvm_iommu_put_pages+0x94/0xb1
    kvm_iommu_unmap_memslots+0x80/0xb6
    kvm_assign_device+0xba/0x117
    kvm_vm_ioctl_assigned_device+0x301/0xa47
    kvm_vm_ioctl+0x36c/0x3a2
    do_vfs_ioctl+0x49e/0x4e4
    sys_ioctl+0x5a/0x7c
    system_call_fastpath+0x16/0x1b
  RIP  put_compound_page+0xd4/0x168
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Reviewed-by: NAndrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b6999b19
    • M
      x86, efi: Calling __pa() with an ioremap()ed address is invalid · e8c71062
      由 Matt Fleming 提交于 
      If we encounter an efi_memory_desc_t without EFI_MEMORY_WB set
in ->attribute we currently call set_memory_uc(), which in turn
calls __pa() on a potentially ioremap'd address.

On CONFIG_X86_32 this is invalid, resulting in the following
oops on some machines:

  BUG: unable to handle kernel paging request at f7f22280
  IP: [<c10257b9>] reserve_ram_pages_type+0x89/0x210
  [...]

  Call Trace:
   [<c104f8ca>] ? page_is_ram+0x1a/0x40
   [<c1025aff>] reserve_memtype+0xdf/0x2f0
   [<c1024dc9>] set_memory_uc+0x49/0xa0
   [<c19334d0>] efi_enter_virtual_mode+0x1c2/0x3aa
   [<c19216d4>] start_kernel+0x291/0x2f2
   [<c19211c7>] ? loglevel+0x1b/0x1b
   [<c19210bf>] i386_start_kernel+0xbf/0xc8

A better approach to this problem is to map the memory region
with the correct attributes from the start, instead of modifying
it after the fact. The uncached case can be handled by
ioremap_nocache() and the cached by ioremap_cache().

Despite first impressions, it's not possible to use
ioremap_cache() to map all cached memory regions on
CONFIG_X86_64 because EFI_RUNTIME_SERVICES_DATA regions really
don't like being mapped into the vmalloc space, as detailed in
the following bug report,

	https://bugzilla.redhat.com/show_bug.cgi?id=748516

Therefore, we need to ensure that any EFI_RUNTIME_SERVICES_DATA
regions are covered by the direct kernel mapping table on
CONFIG_X86_64. To accomplish this we now map E820_RESERVED_EFI
regions via the direct kernel mapping with the initial call to
init_memory_mapping() in setup_arch(), whereas previously these
regions wouldn't be mapped if they were after the last E820_RAM
region until efi_ioremap() was called. Doing it this way allows
us to delete efi_ioremap() completely.
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Huang Ying <huang.ying.caritas@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1321621751-3650-1-git-send-email-matt@console-pimps.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>
      e8c71062
    • M
      x86, hpet: Immediately disable HPET timer 1 if rtc irq is masked · 2ded6e6a
      由 Mark Langsdorf 提交于 
      When HPET is operating in RTC mode, the TN_ENABLE bit on timer1
controls whether the HPET or the RTC delivers interrupts to irq8. When
the system goes into suspend, the RTC driver sends a signal to the
HPET driver so that the HPET releases control of irq8, allowing the
RTC to wake the system from suspend. The switchover is accomplished by
a write to the HPET configuration registers which currently only
occurs while servicing the HPET interrupt.

On some systems, I have seen the system suspend before an HPET
interrupt occurs, preventing the write to the HPET configuration
register and leaving the HPET in control of the irq8. As the HPET is
not active during suspend, it does not generate a wake signal and RTC
alarms do not work.

This patch forces the HPET driver to immediately transfer control of
the irq8 channel to the RTC instead of waiting until the next
interrupt event.
Signed-off-by: NMark Langsdorf <mark.langsdorf@amd.com>
Link: http://lkml.kernel.org/r/20111118153306.GB16319@alberich.amd.comTested-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
      2ded6e6a
  5. 08 12月, 2011 1 次提交
  7. 07 12月, 2011 1 次提交
  9. 06 12月, 2011 7 次提交
  11. 05 12月, 2011 21 次提交
  13. 04 12月, 2011 4 次提交
    • C
      arch/tile: use new generic {enable,disable}_percpu_irq() routines · 0c90547b
      由 Chris Metcalf 提交于 
      We provided very similar routines internally, but now we can hook
into the generic framework by supplying our routines as function
pointers in the irq_chip structure instead.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
      0c90547b
    • C
      arch/tile: fix double-free bug in homecache_free_pages() · c2851a9b
      由 Chris Metcalf 提交于 
      When freeing the page with this API, the page was "put" twice.
This was only discovered bringing up an MPT fusion controller, which
actually used the API; it hadn't been invoked previously, so the bug
had gone unnoticed.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
      c2851a9b
    • C
      arch/tile: add a few #includes and an EXPORT to catch up with kernel changes. · 3989efb7
      由 Chris Metcalf 提交于 
      The empty_zero_page[] export is required for ZERO_PAGE() module references.
The #includes are due to changes in implicit inclusion, and should of
course have been in the sources from the beginning.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
      3989efb7
    • K
      xen/pm_idle: Make pm_idle be default_idle under Xen. · e5fd47bf
      由 Konrad Rzeszutek Wilk 提交于 
      The idea behind commit d91ee586 ("cpuidle: replace xen access to x86
pm_idle and default_idle") was to have one call - disable_cpuidle()
which would make pm_idle not be molested by other code.  It disallows
cpuidle_idle_call to be set to pm_idle (which is excellent).

But in the select_idle_routine() and idle_setup(), the pm_idle can still
be set to either: amd_e400_idle, mwait_idle or default_idle.  This
depends on some CPU flags (MWAIT) and in AMD case on the type of CPU.

In case of mwait_idle we can hit some instances where the hypervisor
(Amazon EC2 specifically) sets the MWAIT and we get:

  Brought up 2 CPUs
  invalid opcode: 0000 [#1] SMP

  Pid: 0, comm: swapper Not tainted 3.1.0-0.rc6.git0.3.fc16.x86_64 #1
  RIP: e030:[<ffffffff81015d1d>]  [<ffffffff81015d1d>] mwait_idle+0x6f/0xb4
  ...
  Call Trace:
   [<ffffffff8100e2ed>] cpu_idle+0xae/0xe8
   [<ffffffff8149ee78>] cpu_bringup_and_idle+0xe/0x10
  RIP  [<ffffffff81015d1d>] mwait_idle+0x6f/0xb4
   RSP <ffff8801d28ddf10>

In the case of amd_e400_idle we don't get so spectacular crashes, but we
do end up making an MSR which is trapped in the hypervisor, and then
follow it up with a yield hypercall.  Meaning we end up going to
hypervisor twice instead of just once.

The previous behavior before v3.0 was that pm_idle was set to
default_idle regardless of select_idle_routine/idle_setup.

We want to do that, but only for one specific case: Xen.  This patch
does that.

Fixes RH BZ #739499 and Ubuntu #881076
Reported-by: NStefan Bader <stefan.bader@canonical.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e5fd47bf