Yanmin Zhang noticed a nice optimization:

  p = l * nr / nl, nl = l/g -> p = g * nr

which eliminates a do_div() from __sched_period().
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Clean-up try_to_wake_up().

Get rid of the 'new_cpu' variable in try_to_wake_up() [ that's, one
#ifdef section less ].  Also remove a few redundant blank lines.
Signed-off-by: NDmitry Adamushko <dmitry.adamushko@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

No need to do a check for 'affine wakeup and passive balancing possibilities'
in select_task_rq_fair() when task_cpu(p) == this_cpu.

I guess, this part got missed upon introduction of per-sched_class
select_task_rq() in try_to_wake_up().
Signed-off-by: NDmitry Adamushko <dmitry.adamushko@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

whitespace cleanups in topology.h.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

reactivate fork balancing.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

add credits for RT balancing improvements.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

style cleanup of various changes that were done recently.

no code changed:

      text    data     bss     dec     hex filename
     26399    2578      48   29025    7161 sched.o.before
     26399    2578      48   29025    7161 sched.o.after
Signed-off-by: NIngo Molnar <mingo@elte.hu>

remove unused JIFFIES_TO_NS() macro.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

fix build bug in sched_rt.c:join/leave_domain and make them only
be included on SMP builds.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We move the rt-overload data as the first global to per-domain
reclassification.  This limits the scope of overload related cache-line
bouncing to stay with a specified partition instead of affecting all
cpus in the system.

Finally, we limit the scope of find_lowest_cpu searches to the domain
instead of the entire system.  Note that we would always respect domain
boundaries even without this patch, but we first would scan potentially
all cpus before whittling the list down.  Now we can avoid looking at
RQs that are out of scope, again reducing cache-line hits.

Note: In some cases, task->cpus_allowed will effectively reduce our search
to within our domain.  However, I believe there are cases where the
cpus_allowed mask may be all ones and therefore we err on the side of
caution.  If it can be optimized later, so be it.
Signed-off-by: NGregory Haskins <ghaskins@novell.com>
CC: Christoph Lameter <clameter@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We add the notion of a root-domain which will be used later to rescope
global variables to per-domain variables.  Each exclusive cpuset
essentially defines an island domain by fully partitioning the member cpus
from any other cpuset.  However, we currently still maintain some
policy/state as global variables which transcend all cpusets.  Consider,
for instance, rt-overload state.

Whenever a new exclusive cpuset is created, we also create a new
root-domain object and move each cpu member to the root-domain's span.
By default the system creates a single root-domain with all cpus as
members (mimicking the global state we have today).

We add some plumbing for storing class specific data in our root-domain.
Whenever a RQ is switching root-domains (because of repartitioning) we
give each sched_class the opportunity to remove any state from its old
domain and add state to the new one.  This logic doesn't have any clients
yet but it will later in the series.
Signed-off-by: NGregory Haskins <ghaskins@novell.com>
CC: Christoph Lameter <clameter@sgi.com>
CC: Paul Jackson <pj@sgi.com>
CC: Simon Derr <simon.derr@bull.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

clean up schedule_balance_rt().
Signed-off-by: NIngo Molnar <mingo@elte.hu>

clean up pull_rt_task().
Signed-off-by: NIngo Molnar <mingo@elte.hu>

remove leftover debugging.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

remove rt_overload() - it's an unnecessary indirection.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

clean up whitespace damage and missing comments in kernel/sched_rt.c.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

clean up overlong line in kernel/sched_debug.c.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

clean up find_lock_lowest_rq().
Signed-off-by: NIngo Molnar <mingo@elte.hu>

clean up pick_next_highest_task_rt().
Signed-off-by: NIngo Molnar <mingo@elte.hu>

rt-balance when creating new tasks.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch removes several cpumask operations by keeping track
of the first of the CPUS that is of the lowest priority. When
the search for the lowest priority runqueue is completed, all
the bits up to the first CPU with the lowest priority runqueue
is cleared.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We can cheaply track the number of bits set in the cpumask for the lowest
priority CPUs.  Therefore, compute the mask's weight and use it to skip
the optimal domain search logic when there is only one CPU available.
Signed-off-by: NGregory Haskins <ghaskins@novell.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We don't need to bother searching if the task cannot be migrated
Signed-off-by: NGregory Haskins <ghaskins@novell.com>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch changes the searching for a run queue by a waking RT task
to try to pick another runqueue if the currently running task
is an RT task.

The reason is that RT tasks behave different than normal
tasks. Preempting a normal task to run a RT task to keep
its cache hot is fine, because the preempted non-RT task
may wait on that same runqueue to run again unless the
migration thread comes along and pulls it off.

RT tasks behave differently. If one is preempted, it makes
an active effort to continue to run. So by having a high
priority task preempt a lower priority RT task, that lower
RT task will then quickly try to run on another runqueue.
This will cause that lower RT task to replace its nice
hot cache (and TLB) with a completely cold one. This is
for the hope that the new high priority RT task will keep
 its cache hot.

Remeber that this high priority RT task was just woken up.
So it may likely have been sleeping for several milliseconds,
and will end up with a cold cache anyway. RT tasks run till
they voluntarily stop, or are preempted by a higher priority
task. This means that it is unlikely that the woken RT task
will have a hot cache to wake up to. So pushing off a lower
RT task is just killing its cache for no good reason.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We have logic to detect whether the system has migratable tasks, but we are
not using it when deciding whether to push tasks away.  So we add support
for considering this new information.
Signed-off-by: NGregory Haskins <ghaskins@novell.com>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The current code base assumes a relatively flat CPU/core topology and will
route RT tasks to any CPU fairly equally.  In the real world, there are
various toplogies and affinities that govern where a task is best suited to
run with the smallest amount of overhead.  NUMA and multi-core CPUs are
prime examples of topologies that can impact cache performance.

Fortunately, linux is already structured to represent these topologies via
the sched_domains interface.  So we change our RT router to consult a
combination of topology and affinity policy to best place tasks during
migration.
Signed-off-by: NGregory Haskins <ghaskins@novell.com>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

In the original patch series that Steven Rostedt and I worked on together,
we both took different approaches to low-priority wakeup path.  I utilized
"pre-routing" (push the task away to a less important RQ before activating)
approach, while Steve utilized a "post-routing" approach.  The advantage of
my approach is that you avoid the overhead of a wasted activate/deactivate
cycle and peripherally related burdens.  The advantage of Steve's method is
that it neatly solves an issue preventing a "pull" optimization from being
deployed.

In the end, we ended up deploying Steve's idea.  But it later dawned on me
that we could get the best of both worlds by deploying both ideas together,
albeit slightly modified.

The idea is simple:  Use a "light-weight" lookup for pre-routing, since we
only need to approximate a good home for the task.  And we also retain the
post-routing push logic to clean up any inaccuracies caused by a condition
of "priority mistargeting" caused by the lightweight lookup.  Most of the
time, the pre-routing should work and yield lower overhead.  In the cases
where it doesnt, the post-router will bat cleanup.
Signed-off-by: NGregory Haskins <ghaskins@novell.com>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

It doesn't hurt if we allow the current CPU to be included in the
search.  We will just simply skip it later if the current CPU turns out
to be the lowest.

We will use this later in the series
Signed-off-by: NGregory Haskins <ghaskins@novell.com>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Isolate the search logic into a function so that it can be used later
in places other than find_locked_lowest_rq().
Signed-off-by: NGregory Haskins <ghaskins@novell.com>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The current wake-up code path tries to determine if it can optimize the
wake-up to "this_cpu" by computing load calculations.  The problem is that
these calculations are only relevant to SCHED_OTHER tasks where load is king.
For RT tasks, priority is king.  So the load calculation is completely wasted
bandwidth.

Therefore, we create a new sched_class interface to help with
pre-wakeup routing decisions and move the load calculation as a function
of CFS task's class.
Signed-off-by: NGregory Haskins <ghaskins@novell.com>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

"this_rq" is normally used to denote the RQ on the current cpu
(i.e. "cpu_rq(this_cpu)").  So clean up the usage of this_rq to be
more consistent with the rest of the code.
Signed-off-by: NGregory Haskins <ghaskins@novell.com>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Some RT tasks (particularly kthreads) are bound to one specific CPU.
It is fairly common for two or more bound tasks to get queued up at the
same time.  Consider, for instance, softirq_timer and softirq_sched.  A
timer goes off in an ISR which schedules softirq_thread to run at RT50.
Then the timer handler determines that it's time to smp-rebalance the
system so it schedules softirq_sched to run.  So we are in a situation
where we have two RT50 tasks queued, and the system will go into
rt-overload condition to request other CPUs for help.

This causes two problems in the current code:

1) If a high-priority bound task and a low-priority unbounded task queue
   up behind the running task, we will fail to ever relocate the unbounded
   task because we terminate the search on the first unmovable task.

2) We spend precious futile cycles in the fast-path trying to pull
   overloaded tasks over.  It is therefore optimial to strive to avoid the
   overhead all together if we can cheaply detect the condition before
   overload even occurs.

This patch tries to achieve this optimization by utilizing the hamming
weight of the task->cpus_allowed mask.  A weight of 1 indicates that
the task cannot be migrated.  We will then utilize this information to
skip non-migratable tasks and to eliminate uncessary rebalance attempts.

We introduce a per-rq variable to count the number of migratable tasks
that are currently running.  We only go into overload if we have more
than one rt task, AND at least one of them is migratable.

In addition, we introduce a per-task variable to cache the cpus_allowed
weight, since the hamming calculation is probably relatively expensive.
We only update the cached value when the mask is updated which should be
relatively infrequent, especially compared to scheduling frequency
in the fast path.
Signed-off-by: NGregory Haskins <ghaskins@novell.com>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Since we now take an active approach to load balancing, we don't need to
balance RT tasks via the normal task balancer. In fact, this code was
found to pull RT tasks away from CPUS that the active movement performed,
resulting in large latencies.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds pushing of overloaded RT tasks from a runqueue that is
having tasks (most likely RT tasks) added to the run queue.

TODO: We don't cover the case of waking of new RT tasks (yet).
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds the algorithm to pull tasks from RT overloaded runqueues.

When a pull RT is initiated, all overloaded runqueues are examined for
a RT task that is higher in prio than the highest prio task queued on the
target runqueue. If another runqueue holds a RT task that is of higher
prio than the highest prio task on the target runqueue is found it is pulled
to the target runqueue.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds an RT overload accounting system. When a runqueue has
more than one RT task queued, it is marked as overloaded. That is that it
is a candidate to have RT tasks pulled from it.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds an algorithm to push extra RT tasks off a run queue to
other CPU runqueues.

When more than one RT task is added to a run queue, this algorithm takes
an assertive approach to push the RT tasks that are not running onto other
run queues that have lower priority.  The way this works is that the highest
RT task that is not running is looked at and we examine the runqueues on
the CPUS for that tasks affinity mask. We find the runqueue with the lowest
prio in the CPU affinity of the picked task, and if it is lower in prio than
the picked task, we push the task onto that CPU runqueue.

We continue pushing RT tasks off the current runqueue until we don't push any
more.  The algorithm stops when the next highest RT task can't preempt any
other processes on other CPUS.

TODO: The algorithm may stop when there are still RT tasks that can be
 migrated. Specifically, if the highest non running RT task CPU affinity
 is restricted to CPUs that are running higher priority tasks, there may
 be a lower priority task queued that has an affinity with a CPU that is
 running a lower priority task that it could be migrated to.  This
 patch set does not address this issue.

Note: checkpatch reveals two over 80 character instances. I'm not sure
 that breaking them up will help visually, so I left them as is.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds accounting to each runqueue to keep track of the
highest prio task queued on the run queue. We only care about
RT tasks, so if the run queue does not contain any active RT tasks
its priority will be considered MAX_RT_PRIO.

This information will be used for later patches.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds accounting to keep track of the number of RT tasks running
on a runqueue. This information will be used in later patches.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

this patch extends the soft-lockup detector to automatically
detect hung TASK_UNINTERRUPTIBLE tasks. Such hung tasks are
printed the following way:

 ------------------>
 INFO: task prctl:3042 blocked for more than 120 seconds.
 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message
 prctl         D fd5e3793     0  3042   2997
        f6050f38 00000046 00000001 fd5e3793 00000009 c06d8264 c06dae80 00000286
        f6050f40 f6050f00 f7d34d90 f7d34fc8 c1e1be80 00000001 f6050000 00000000
        f7e92d00 00000286 f6050f18 c0489d1a f6050f40 00006605 00000000 c0133a5b
 Call Trace:
  [<c04883a5>] schedule_timeout+0x6d/0x8b
  [<c04883d8>] schedule_timeout_uninterruptible+0x15/0x17
  [<c0133a76>] msleep+0x10/0x16
  [<c0138974>] sys_prctl+0x30/0x1e2
  [<c0104c52>] sysenter_past_esp+0x5f/0xa5
  =======================
 2 locks held by prctl/3042:
 #0:  (&sb->s_type->i_mutex_key#5){--..}, at: [<c0197d11>] do_fsync+0x38/0x7a
 #1:  (jbd_handle){--..}, at: [<c01ca3d2>] journal_start+0xc7/0xe9
 <------------------

the current default timeout is 120 seconds. Such messages are printed
up to 10 times per bootup. If the system has crashed already then the
messages are not printed.

if lockdep is enabled then all held locks are printed as well.

this feature is a natural extension to the softlockup-detector (kernel
locked up without scheduling) and to the NMI watchdog (kernel locked up
with IRQs disabled).

[ Gautham R Shenoy <ego@in.ibm.com>: CPU hotplug fixes. ]
[ Andrew Morton <akpm@linux-foundation.org>: build warning fix. ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>