The field adv_instance_cnt is always accessed within a device lock,
except in the function add_advertising. A concurrent remove of an
advertisement with adding another one could result in the if check
"if a new instance was actually added" to not trigger, resulting
in not triggering the "advertising added event".
Signed-off-by: NNiels Dossche <niels.dossche@ugent.be>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Don't populate the read-only array bt_uuid_any on the stack but
instead make it static const. Also makes the object code a little
smaller.
Signed-off-by: NColin Ian King <colin.i.king@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch introduce eir_skb_put_data() that can be used to simplify
operations on eir in goal of eliminating the necessity of intermediary
buffers.
eir_skb_put_data() is in pair to what eir_append_data() does with help of
eir_len, but without awkwardness when passing return value to skb_put() (as
it returns updated offset not size).
Signed-off-by: NRadoslaw Biernacki <rad@semihalf.com>
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>

This patch fixes skb allocation, as lack of space for ev might push skb
tail beyond its end.
Also introduce eir_precalc_len() that can be used instead of magic
numbers for similar eir operations on skb.

Fixes: cf1bce1d ("Bluetooth: mgmt: Make use of mgmt_send_event_skb in MGMT_EV_DEVICE_FOUND")
Fixes: e9674143 ("Bluetooth: mgmt: Make use of mgmt_send_event_skb in MGMT_EV_DEVICE_CONNECTED")
Signed-off-by: NAngela Czubak <acz@semihalf.com>
Signed-off-by: NMarek Maslanka <mm@semihalf.com>
Signed-off-by: NRadoslaw Biernacki <rad@semihalf.com>
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>

Return value from mgmt_cmd_complete() directly instead
of taking this in another redundant variable.
Reported-by: NZeal Robot <zealci@zte.com.cn>
Signed-off-by: NMinghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: NCGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>

A number of places in the MGMT handlers we examine the command queue for
other commands (in progress but not yet complete) that will interact
with the process being performed. However, not all commands go into the
queue if one of:

1. There is no negative side effect of consecutive or redundent commands
2. The command is entirely perform "inline".

This change examines each "pending command" check, and if it is not
needed, deletes the check. Of the remaining pending command checks, we
make sure that the command is in the pending queue by using the
mgmt_pending_add/mgmt_pending_remove pair rather than the
mgmt_pending_new/mgmt_pending_free pair.

Link: https://lore.kernel.org/linux-bluetooth/f648f2e11bb3c2974c32e605a85ac3a9fac944f1.camel@redhat.com/T/Tested-by: NMaxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: NBrian Gix <brian.gix@intel.com>
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>

Increment the mgmt revision due to recent changes.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>

This patch introduces two new MGMT events for notifying the bluetoothd
whenever the controller starts/stops monitoring a device.

Test performed:
- Verified by logs that the MSFT Monitor Device is received from the
  controller and the bluetoothd is notified whenever the controller
  starts/stops monitoring a device.
Signed-off-by: NManish Mandlik <mmandlik@google.com>
Reviewed-by: NMiao-chen Chou <mcchou@google.com>
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>

There is a spelling mistake in a bt_dev_info message. Fix it.
Signed-off-by: NColin Ian King <colin.i.king@gmail.com>
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>

If controller/driver don't support LE simultaneous roles its UUID shall
be omitted when responding to MGMT_OP_READ_EXP_FEATURES_INFO.

This also rework the support introducing HCI_LE_SIMULTANEOUS_ROLES flag
so it can be detected when userspace wants to use or not.
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This attempts to check if the controller can act as both central and
peripheral simultaneously and in case it does skip suspending
advertising or in case of directed advertising don't fail if scanning.
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This makes use of mgmt_alloc_skb to build MGMT_EV_DEVICE_CONNECTED so
the data is copied directly to skb that is then sent using
mgmt_send_event_skb eliminating the necessity of intermediary buffers.
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This makes use of mgmt_alloc_skb to build MGMT_EV_DEVICE_FOUND so the
data is copied directly to skb that is then sent using
mgmt_send_event_skb eliminating the necessity of intermediary buffers.
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This introduces HCI_CONN_FLAG_DEVICE_PRIVACY which can be used by
userspace to indicate to the controller to use Device Privacy Mode to a
specific device.
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This reworks hci_conn_params flags to use bitmap_* helpers and add
support for setting the supported flags in hdev->conn_flags so it can
easily be accessed.
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This make use of hci_dev_test_and_{set,clear}_flag instead of doing 2
operations in a row.

Fixes: cbbdfa6f ("Bluetooth: Enable controller RPA resolution using Experimental feature")
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Introducing NAME_REQUEST_FAILED flag that will be sent together with
device found event on name resolve failure. This will provide the
userspace with an information so it can decide not to resolve the
name for these devices in the future.
Signed-off-by: NArchie Pusaka <apusaka@chromium.org>
Reviewed-by: NMiao-chen Chou <mcchou@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This makes MGMT_OP_SET_CONNEABLE use hci_cmd_sync_queue instead of
use a dedicated connetable_update work.
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This makes MGMT_OP_SET_DISCOVERABLE use hci_cmd_sync_queue instead of
use a dedicated discoverable_update work.
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds the support of the AOSP Bluetooth Quality Report
(BQR) events.

Multiple vendors have supported the AOSP Bluetooth Quality Report.
When a Bluetooth controller supports the capability, it can enable
the aosp capability through hci_set_aosp_capable. Then hci_core will
set up the hdev->aosp_set_quality_report callback through aosp_do_open
if the controller responds to support the quality report capability.

Note that Intel also supports a distinct telemetry quality report
specification. Intel sets up the hdev->set_quality_report callback
in the btusb driver module.
Reviewed-by: NMiao-chen Chou <mcchou@chromium.org>
Signed-off-by: NJoseph Hwang <josephsih@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This makes hci_suspend_notifier use the hci_*_sync which can be
executed synchronously which is allowed in the suspend_notifier and
simplifies a lot of the handling since the status of each command can
be checked inline so no other work need to be scheduled thus can be
performed without using of a state machine.
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

mgmt-tester paths:
Set SSP on - Success 2
Set Device ID - SSP off and Power on
Signed-off-by: NBrian Gix <brian.gix@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

mgmt-test paths:
Set Advertising on - Appearance 1
Set Advertising on - Local name 1
Set Advertising on - Name + Appear 1
Set Local Name - Success 2
Set Local Name - Success 3
Add Advertising - Success (Empty ScRsp)
Add Advertising - Success (ScRsp appear)
Add Advertising - Invalid Params (ScRsp appear long)
Add Advertising - Success (Complete name)
Add Advertising - Success (Shortened name)
Add Advertising - Success (Short name)
Add Advertising - Success (Name + data)
Add Advertising - Invalid Params (Name + data)
Add Advertising - Success (Name+data+appear)
Set appearance - BR/EDR LE
Set appearance - LE only
Add Ext Advertising - Success (Empty ScRsp)
Add Ext Advertising - Success (ScRsp appear)
Add Ext Advertising - Invalid Params (ScRsp appear long)
Add Ext Advertising - Success (Complete name)
Add Ext Advertising - Success (Shortened name)
Add Ext Advertising - Success (Short name)
Add Ext Advertising - Success (Name + data)
Add Ext Advertising - Invalid Params (Name + data)
Add Ext Advertising - Success (Name+data+appear)
Signed-off-by: NBrian Gix <brian.gix@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

mgmt-test paths:
Set powered on - Privacy and Advertising
Set Advertising on - Success 2
Set Advertising on - Appearance 1
Set Advertising on - Local name 1
Set Advertising on - Name + Appear 1
Add Advertising - Success 4
Add Advertising - Success 5
Add Ext Advertising - Success 4
Add Ext Advertising - Success 5
Signed-off-by: NBrian Gix <brian.gix@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

mgmt-test paths:
Set PHY 2m Success
Set PHY coded Succcess
Set PHY 1m 2m coded Succcess
Set PHY 2m tx success
Set PHY 2m rx success
Set PHY Invalid Param
Start Discovery - (2m, Scan Param)
Start Discovery - (coded, Scan Param)
Start Discovery - (1m, 2m, coded, Scan Param)
Signed-off-by: NBrian Gix <brian.gix@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Uses existing *_sync functions, but made hci_update_name_sync
non-static.

mgmt-test paths:
Set Advertising on - Local name 1
Set Advertising on - Name + Appear 1
Set Local Name - Success 1
Set Local Name - Success 2
Set Local Name - Success 3
Add Advertising - Success (Empty ScRsp)
Add Advertising - Success (Complete name)
Add Advertising - Success (Shortened name)
Add Advertising - Success (Short name)
Add Advertising - Success (Name + data)
Add Advertising - Invalid Params (Name + data)
Add Advertising - Success (Name+data+appear)
Read Ext Controller Info 3
Read Ext Controller Info 4
Read Ext Controller Info 5
Add Ext Advertising - Success (Empty ScRsp)
Add Ext Advertising - Success (Complete name)
Add Ext Advertising - Success (Shortened name)
Add Ext Advertising - Success (Short name)
Add Ext Advertising - Success (Name + data)
Add Ext Advertising - Invalid Params (Name + data)
Add Ext Advertising - Success (Name+data+appear)
Signed-off-by: NBrian Gix <brian.gix@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Uses existing *_sync functions

mgmt-test paths:
Read Local OOB Ext Data - Invalid index
Read Local OOB Ext Data - Legacy pairing
Read Local OOB Ext Data - Success SSP
Read Local OOB Ext Data - Success SC
Signed-off-by: NBrian Gix <brian.gix@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

New functions:
  hci_read_local_oob_data_sync

This function requires all of the data from the cmd cmplt event
to be passed up to the caller via the skb.

mgmt-tester paths:
Read Local OOB Data - Not powered
Read Local OOB Data - Legacy pairing
Read Local OOB Data - Success SSP
Read Local OOB Data - Success SC
Signed-off-by: NBrian Gix <brian.gix@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Uses:
  hci_disable_advertising_sync
  hci_remove_ext_adv_instance_sync
  hci_write_le_host_supported_sync
  hci_setup_ext_adv_instance_sync
  hci_update_scan_rsp_data_sync
Signed-off-by: NBrian Gix <brian.gix@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Synchronous version of MGMT_OP_GET_CLOCK_INFO.
Signed-off-by: NBrian Gix <brian.gix@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Synchronous version of MGMT_OP_SET_SECURE_CONN.
Signed-off-by: NBrian Gix <brian.gix@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Synchronous version of MGMT_OP_GET_CONN_INFO

Implements:
  hci_read_rssi_sync
  hci_read_tx_power_sync
Signed-off-by: NBrian Gix <brian.gix@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Uses previously written:
  hci_write_fast_connectable_sync
  hci_update_scan_sync
  hci_update_adv_data_sync
Signed-off-by: NBrian Gix <brian.gix@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This creates a synchronized Write Fast Connectable call and attaches it
to the MGMT_OP_SET_FAST_CONNECTABLE management opcode.
Signed-off-by: NBrian Gix <brian.gix@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This make use of hci_cmd_sync_queue for MGMT_OP_START_DISCOVERY,
MGMT_OP_START_SERVICE_DISCOVERY and MGMT_OP_STOP_DISCOVERY to use
hci_cmd_sync_queue so they no longer depend on hdev->discov_update work
to send any commands.

Tested with:

tools/mgmt-tester -s "Start Discovery"

Test Summary
------------
Start Discovery - Not powered 1                      Passed
Start Discovery - Invalid parameters 1               Passed
Start Discovery - Not supported 1                    Passed
Start Discovery - Success 1                          Passed
Start Discovery - Success 2                          Passed
Start Discovery - Power Off 1                        Passed
Start Discovery BREDR LE - (Ext Scan Enable)         Passed
Start Discovery LE - (Ext Scan Enable)               Passed
Start Discovery LE - (Ext Scan Param)                Passed
Start Discovery - (2m, Scan Param)                   Passed
Start Discovery - (coded, Scan Param)                Passed
Start Discovery - (1m, 2m, coded, Scan Param)        Passed
LL Privacy - Start Discovery 1 (Disable RL)          Passed
LL Privacy - Start Discovery 2 (Disable RL)          Passed
Total: 14, Passed: 14 (100.0%), Failed: 0, Not Run: 0

tools/mgmt-tester -s "Start Service"

Test Summary
------------
Start Service Discovery - Not powered 1              Passed
Start Service Discovery - Invalid parameters 1       Passed
Start Service Discovery - Not supported 1            Passed
Start Service Discovery - Success 1                  Passed
Start Service Discovery - Success 2                  Passed
Total: 5, Passed: 5 (100.0%), Failed: 0, Not Run: 0

tools/mgmt-tester -s "Stop Discovery"

Test Summary
------------
Stop Discovery - Success 1                           Passed
Stop Discovery - BR/EDR (Inquiry) Success 1          Passed
Stop Discovery - Rejected 1                          Passed
Stop Discovery - Invalid parameters 1                Passed
Stop Discovery - (Ext Scan Disable)                  Passed
Total: 5, Passed: 5 (100.0%), Failed: 0, Not Run: 0
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This make use of hci_cmd_sync_queue when MGMT_SET_POWERED is used so all
commands are run within hdev->cmd_sync_work instead of
hdev->power_on_work and hdev->power_off_work.

In addition to that the power on sequence now takes into account if
local IRK needs to be programmed in the resolving list.

Tested with:

tools/mgmt-tester -s "Set powered"

Test Summary
------------
Set powered on - Success                             Passed
Set powered on - Invalid parameters 1                Passed
Set powered on - Invalid parameters 2                Passed
Set powered on - Invalid parameters 3                Passed
Set powered on - Invalid index                       Passed
Set powered on - Privacy and Advertising             Passed
Set powered off - Success                            Passed
Set powered off - Class of Device                    Passed
Set powered off - Invalid parameters 1               Passed
Set powered off - Invalid parameters 2               Passed
Set powered off - Invalid parameters 3               Passed
Total: 11, Passed: 11 (100.0%), Failed: 0, Not Run: 0
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This replaces the use of hci_update_background_scan with
hci_update_passive_scan which runs from cmd_work_sync and deal properly
with resolving list when LL privacy is enabled.
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This enables advertising when LL privacy is enabled and changes the
command sequence when resolving list is updated to also account for when
advertising is enabled using the following sequence:

If there are devices to scan:

Disable Scanning -> Update Accept List ->
use_ll_privacy((Disable Advertising) -> Disable Resolving List ->
Update Resolving List -> Enable Resolving List -> (Enable Advertising)) ->
Enable Scanning

Otherwise:

Disable Scanning

Errors during the Update Accept List stage are handled gracefully by
restoring any previous state (e.g. advertising) and disabling the use of
accept list as either accept list or resolving list could not be
updated.

Tested with:

mgmt-tester -s "LL Privacy"

Test Summary
------------
LL Privacy - Add Device 1 (Add to WL)                Passed
LL Privacy - Add Device 2 (Add to RL)                Passed
LL Privacy - Add Device 3 (Enable RL)                Passed
LL Privacy - Add Device 4 (2 Devices to WL)          Passed
LL Privacy - Add Device 5 (2 Devices to RL)          Passed
LL Privacy - Add Device 6 (RL is full)               Passed
LL Privacy - Add Device 7 (WL is full)               Passed
LL Privacy - Add Device 8 (Disable Adv)              Passed
LL Privacy - Add Device 9 (Multi Adv)                Passed
LL Privacy - Add Device 10 (Multi Dev and Multi Adv) Passed
LL Privacy - Remove Device 1 (Remove from WL)        Passed
LL Privacy - Remove Device 2 (Remove from RL)        Passed
LL Privacy - Remove Device 3 (Disable RL)            Passed
LL Privacy - Remove Device 4 (Disable Adv)           Passed
LL Privacy - Remove Device 5 (Multi Adv)             Passed
LL Privacy - Start Discovery 1 (Disable RL)          Passed
LL Privacy - Start Discovery 2 (Disable RL)          Passed
Total: 18, Passed: 18 (100.0%), Failed: 0, Not Run: 0
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This make use of hci_cmd_sync_queue for the following MGMT commands:

    Add Device
    Remove Device

Tested with:

mgmt-tester -s "Add Device"

Test Summary
------------
Add Device - Invalid Params 1                        Passed
Add Device - Invalid Params 2                        Passed
Add Device - Invalid Params 3                        Passed
Add Device - Invalid Params 4                        Passed
Add Device - Success 1                               Passed
Add Device - Success 2                               Passed
Add Device - Success 3                               Passed
Add Device - Success 4                               Passed
Add Device - Success 5                               Passed
Add Device - Success 6 - Add to whitelist            Passed
Add Device - Success 7 - Add to resolv list          Passed
Add Device - Success 8 - Enable resolv list          Passed
Total: 12, Passed: 12 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 0.209 seconds

mgmt-tester -s "Remove Device"

Test Summary
------------
Remove Device - Invalid Params 1                     Passed
Remove Device - Invalid Params 2                     Passed
Remove Device - Invalid Params 3                     Passed
Remove Device - Success 1                            Passed
Remove Device - Success 2                            Passed
Remove Device - Success 3                            Passed
Remove Device - Success 4                            Passed
Remove Device - Success 5                            Passed
Remove Device - Success 6 - All Devices              Passed
Remove Device - Success 7 - Remove from whitelist    Passed
Remove Device - Success 8 - Remove from resolv list  Passed
Total: 11, Passed: 11 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 4.26 seconds
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This make use of hci_cmd_sync_queue for the following MGMT commands:

Add Advertising
Remove Advertising
Add Extended Advertising Parameters
Add Extended Advertising Data

mgmt-tester -s "Add Advertising"

Test Summary
------------
Add Advertising - Failure: LE off                    Passed
Add Advertising - Invalid Params 1 (AD too long)     Passed
Add Advertising - Invalid Params 2 (Malformed len)   Passed
Add Advertising - Invalid Params 3 (Malformed len)   Passed
Add Advertising - Invalid Params 4 (Malformed len)   Passed
Add Advertising - Invalid Params 5 (AD too long)     Passed
Add Advertising - Invalid Params 6 (ScRsp too long)  Passed
Add Advertising - Invalid Params 7 (Malformed len)   Passed
Add Advertising - Invalid Params 8 (Malformed len)   Passed
Add Advertising - Invalid Params 9 (Malformed len)   Passed
Add Advertising - Invalid Params 10 (ScRsp too long) Passed
Add Advertising - Rejected (Timeout, !Powered)       Passed
Add Advertising - Success 1 (Powered, Add Adv Inst)  Passed
Add Advertising - Success 2 (!Powered, Add Adv Inst) Passed
Add Advertising - Success 3 (!Powered, Adv Enable)   Passed
Add Advertising - Success 4 (Set Adv on override)    Passed
Add Advertising - Success 5 (Set Adv off override)   Passed
Add Advertising - Success 6 (Scan Rsp Dta, Adv ok)   Passed
Add Advertising - Success 7 (Scan Rsp Dta, Scan ok)  Passed
Add Advertising - Success 8 (Connectable Flag)       Passed
Add Advertising - Success 9 (General Discov Flag)    Passed
Add Advertising - Success 10 (Limited Discov Flag)   Passed
Add Advertising - Success 11 (Managed Flags)         Passed
Add Advertising - Success 12 (TX Power Flag)         Passed
Add Advertising - Success 13 (ADV_SCAN_IND)          Passed
Add Advertising - Success 14 (ADV_NONCONN_IND)       Passed
Add Advertising - Success 15 (ADV_IND)               Passed
Add Advertising - Success 16 (Connectable -> on)     Passed
Add Advertising - Success 17 (Connectable -> off)    Passed
Add Advertising - Success 18 (Power -> off, Remove)  Passed
Add Advertising - Success 19 (Power -> off, Keep)    Passed
Add Advertising - Success 20 (Add Adv override)      Passed
Add Advertising - Success 21 (Timeout expires)       Passed
Add Advertising - Success 22 (LE -> off, Remove)     Passed
Add Advertising - Success (Empty ScRsp)              Passed
Add Advertising - Success (ScRsp only)               Passed
Add Advertising - Invalid Params (ScRsp too long)    Passed
Add Advertising - Success (ScRsp appear)             Passed
Add Advertising - Invalid Params (ScRsp appear long) Passed
Add Advertising - Success (Appear is null)           Passed
Add Advertising - Success (Name is null)             Passed
Add Advertising - Success (Complete name)            Passed
Add Advertising - Success (Shortened name)           Passed
Add Advertising - Success (Short name)               Passed
Add Advertising - Success (Name + data)              Passed
Add Advertising - Invalid Params (Name + data)       Passed
Add Advertising - Success (Name+data+appear)         Passed
Total: 47, Passed: 47 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 2.17 seconds

mgmt-tester -s "Remove Advertising"

Test Summary
------------
Remove Advertising - Invalid Params 1                Passed
Remove Advertising - Success 1                       Passed
Remove Advertising - Success 2                       Passed
Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 0.0585 seconds

mgmt-tester -s "Ext Adv MGMT Params"

Test Summary:
------------
Ext Adv MGMT Params - Unpowered                      Passed
Ext Adv MGMT Params - Invalid parameters             Passed
Ext Adv MGMT Params - Success                        Passed
Ext Adv MGMT Params - (5.0) Success                  Passed
Total: 4, Passed: 4 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 0.0746 seconds

mgmt-tester -s "Ext Adv MGMT -"

Test Summary
------------
Ext Adv MGMT - Data set without Params               Passed
Ext Adv MGMT - AD Data (5.0) Invalid parameters      Passed
Ext Adv MGMT - AD Data (5.0) Success                 Passed
Ext Adv MGMT - AD Scan Response (5.0) Success        Passed
Total: 4, Passed: 4 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 0.0805 seconds
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>