This adds the hooks needed for readahead. In the readpage_end_io_hook,
the extent state is checked for the EXTENT_READAHEAD flag. Only in this
case the readahead hook is called, to keep the impact on non-ra as low
as possible.
Additionally, a hook for a failed IO is added, otherwise readahead would
wait indefinitely for the extent to finish.

Changes for v2:
 - eliminate race condition
Signed-off-by: NArne Jansen <sensille@gmx.net>

read_extent_buffer_pages currently has two modes, either trigger a read
without waiting for anything, or wait for the I/O to finish. The former
also bails when it's unable to lock the page. This patch now adds an
additional parameter to allow it to block on page lock, but don't wait
for completion.

Changes v5:
 - merge the 2 wait parameters into one and define WAIT_NONE, WAIT_COMPLETE and
   WAIT_PAGE_LOCK

Change v6:
 - fix bug introduced in v5
Signed-off-by: NArne Jansen <sensille@gmx.net>

When doing a writepage we call writepages to try and write out any other dirty
pages in the area.  This could cause problems where we commit a transaction and
then have somebody else dirtying metadata in the area as we could end up writing
out a lot more than we care about, which could cause latency on anybody who is
waiting for the transaction to completely finish committing.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

find_first_extent_bit() and find_first_extent_bit_state() share
most of the code, and we can just make the former call the latter.
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

We can just use cond_resched_lock().
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Don't duplicate set_state_bits().
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The set/clear bit and the extent split/merge hooks only ever return 0.

 Changing them to return void simplifies the error handling cases later.

 This patch changes the hook prototypes, the single implementation of each,
 and the functions that call them to return void instead.

 Since all four of these hooks execute under a spinlock, they're necessarily
 simple.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

For metadata buffers that don't straddle pages (all of them), btrfs
can safely use the page uptodate bits and extent_buffer uptodate bit
instead of needing to use the extent_state tree.

This greatly reduces contention on the state tree lock.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The btrfs metadata btree is the source of significant
lock contention, especially in the root node.   This
commit changes our locking to use a reader/writer
lock.

The lock is built on top of rw spinlocks, and it
extends the lock tracking to remember if we have a
read lock or a write lock when we go to blocking.  Atomics
count the number of blocking readers or writers at any
given time.

It removes all of the adaptive spinning from the old code
and uses only the spinning/blocking hints inside of btrfs
to decide when it should continue spinning.

In read heavy workloads this is dramatically faster.  In write
heavy workloads we're still faster because of less contention
on the root node lock.

We suffer slightly in dbench because we schedule more often
during write locks, but all other benchmarks so far are improved.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The extent_buffers have a very complex interface where
we use HIGHMEM for metadata and try to cache a kmap mapping
to access the memory.

The next commit adds reader/writer locks, and concurrent use
of this kmap cache would make it even more complex.

This commit drops the ability to use HIGHMEM with extent buffers,
and rips out all of the related code.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Everybody else does this, we need to do it too.  If we're syncing, we need to
tag the pages we're going to write for writeback so we don't end up writing the
same stuff over and over again if somebody is constantly redirtying our file.
This will keep us from having latencies with heavy sync workloads.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

First, we can sometimes free the state we're merging, which means anybody who
calls merge_state() may have the state it passed in free'ed.  This is
problematic because we could end up caching the state, which makes caching
useless as the state will no longer be part of the tree.  So instead of free'ing
the state we passed into merge_state(), set it's end to the other->end and free
the other state.  This way we are sure to cache the correct state.  Also because
we can merge states together, instead of only using the cache'd state if it's
start == the start we are looking for, go ahead and use it if the start we are
looking for is within the range of the cached state.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

Pass struct wb_writeback_work all the way down to writeback_sb_inodes(),
and initialize the struct writeback_control there.

struct writeback_control is basically designed to control writeback of a
single file, but we keep abuse it for writing multiple files in
writeback_sb_inodes() and its callers.

It immediately clean things up, e.g. suddenly wbc.nr_to_write vs
work->nr_pages starts to make sense, and instead of saving and restoring
pages_skipped in writeback_sb_inodes it can always start with a clean
zero value.

It also makes a neat IO pattern change: large dirty files are now
written in the full 4MB writeback chunk size, rather than whatever
remained quota in wbc->nr_to_write.
Acked-by: NJan Kara <jack@suse.cz>
Proposed-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>

The btrfs releasepage function depends on ENOMEM coming
back when it is called atomic.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This sixth patch of eight in this cleancache series "opts-in"
cleancache for btrfs.  Filesystems must explicitly enable
cleancache by calling cleancache_init_fs anytime an instance
of the filesystem is mounted.  Btrfs uses its own readpage
which must be hooked, but all other cleancache hooks are in
the VFS layer including the matching cleancache_flush_fs hook
which must be called on unmount.

Details and a FAQ can be found in Documentation/vm/cleancache.txt

[v6-v8: no changes]
[v5: jeremy@goop.org: simplify init hook and any future fs init changes]
Signed-off-by: NDan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>
Reviewed-by: NJeremy Fitzhardinge <jeremy@goop.org>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik Van Riel <riel@redhat.com>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Andreas Dilger <adilger@sun.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Nitin Gupta <ngupta@vflare.org>

merge_state can free the current state if it can be merged with the next node,
but in set_extent_bit(), after merge_state, we still use the current extent to
get the next node and cache it into cached_state
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

It doesn't allocate extent_state and check the result properly:
- in set_extent_bit, it doesn't allocate extent_state if the path is not
  allowed wait

- in clear_extent_bit, it doesn't check the result after atomic-ly allocate,
  we trigger BUG_ON() if it's fail

- if allocate fail, we trigger BUG_ON instead of returning -ENOMEM since
  the return value of clear_extent_bit() is ignored by many callers
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

In count_range_bits we are adjusting total_bytes based on the range we are
searching for, but we don't adjust the range start according to the range we are
searching for, which makes for weird results.  For example, if the range

[0-8192]

is set DELALLOC, but I search for 4096-8192, I will get back 4096 for the number
of bytes found, but the range_start will be 0, which makes it look like the
range is [0-4096].  So instead set range_start = max(cur_start, state->start).
This makes everything come out right.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

Commit e66eed65 ("list: remove prefetching from regular list
iterators") removed the include of prefetch.h from list.h, which
uncovered several cases that had apparently relied on that rather
obscure header file dependency.

So this fixes things up a bit, using

   grep -L linux/prefetch.h $(git grep -l '[^a-z_]prefetchw*(' -- '*.[ch]')
   grep -L 'prefetchw*(' $(git grep -l 'linux/prefetch.h' -- '*.[ch]')

to guide us in finding files that either need <linux/prefetch.h>
inclusion, or have it despite not needing it.

There are more of them around (mostly network drivers), but this gets
many core ones.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove static and global declarations and/or definitions. Reduces size
of btrfs.ko by ~3.4kB.

  text    data     bss     dec     hex filename
402081    7464     200  409745   64091 btrfs.ko.base
398620    7144     200  405964   631cc btrfs.ko.remove-all
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

pass GFP_NOFS directly to kmem_cache_alloc
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

pass GFP_NOFS directly to kmem_cache_alloc
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

all callers pass GFP_NOFS, but the GFP mask argument is not used in the
function; GFP_ATOMIC is passed to radix tree initialization and it's the
only correct one, since we're using the preload/insert mechanism of
radix tree.
Let's drop the gfp mask from btrfs function, this will not change
behaviour.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

use IS_ERR_OR_NULL when possible, done by this coccinelle script:

@ match @
identifier id;
@@
(
- BUG_ON(IS_ERR(id) || !id);
+ BUG_ON(IS_ERR_OR_NULL(id));
|
- IS_ERR(id) || !id
+ IS_ERR_OR_NULL(id)
|
- !id || IS_ERR(id)
+ IS_ERR_OR_NULL(id)
)
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

reported by gcc -Wshadow:
page_index, page_offset, new_inode, dev_name
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

the space cache use extent_readpages() to read free space information,
so we can not use GFP_KERNEL flag to allocate memory, or it may lead
to deadlock.
Signed-off-by: NItaru Kitayama <kitayama@cl.bb4u.ne.jp>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

There's a potential problem in 32bit system when we exhaust 32bit inode
numbers and start to allocate big inode numbers, because btrfs uses
inode->i_ino in many places.

So here we always use BTRFS_I(inode)->location.objectid, which is an
u64 variable.

There are 2 exceptions that BTRFS_I(inode)->location.objectid !=
inode->i_ino: the btree inode (0 vs 1) and empty subvol dirs (256 vs 2),
and inode->i_ino will be used in those cases.

Another reason to make this change is I'm going to use a special inode
to save free ino cache, and the inode number must be > (u64)-256.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>

A recent commit caches the extent state in end_bio_extent_readpage,
but the search it does should look for locked extents.  This
fixes things to make it more effective.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The extent_io code can take cached pointers into the extent state trees,
and these can make lookups much faster in common operations.  The
caching only happens when specific bits are set that prevent merging
and splitting of the extent state.

A help function was added to uncache the state, and it was testing
the same set of conditionals.  This can leak in very strange corner
cases where the lock bit goes away unexpectedly.

The uncaching should be unconditional.  Once we have a ref on the
extent we should always give it up.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

In several places the sequence (set_extent_uptodate, unlock_extent) is used.
This leads to a duplicate lookup of the extent state. This patch lets
set_extent_uptodate return a cached extent_state which can be passed to
unlock_extent_cached.
The occurences of the above sequences are updated to use the cache. Only
end_bio_extent_readpage is updated that it first gets a cached state to
pass it to the readpage_end_io_hook as the prototype requested and is later
on being used for set/unlock.
Signed-off-by: NArne Jansen <sensille@gmx.net>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Fix data corruption caused by memcpy() usage on overlapping data.
I've observed it first when found out usermode linux crash on btrfs.

?all chain is the following:
------------[ cut here ]------------
WARNING: at /home/slyfox/linux-2.6/fs/btrfs/extent_io.c:3900 memcpy_extent_buffer+0x1a5/0x219()
Call Trace:
6fa39a58:  [<601b495e>] _raw_spin_unlock_irqrestore+0x18/0x1c
6fa39a68:  [<60029ad9>] warn_slowpath_common+0x59/0x70
6fa39aa8:  [<60029b05>] warn_slowpath_null+0x15/0x17
6fa39ab8:  [<600efc97>] memcpy_extent_buffer+0x1a5/0x219
6fa39b48:  [<600efd9f>] memmove_extent_buffer+0x94/0x208
6fa39bc8:  [<600becbf>] btrfs_del_items+0x214/0x473
6fa39c78:  [<600ce1b0>] btrfs_delete_one_dir_name+0x7c/0xda
6fa39cc8:  [<600dad6b>] __btrfs_unlink_inode+0xad/0x25d
6fa39d08:  [<600d7864>] btrfs_start_transaction+0xe/0x10
6fa39d48:  [<600dc9ff>] btrfs_unlink_inode+0x1b/0x3b
6fa39d78:  [<600e04bc>] btrfs_unlink+0x70/0xef
6fa39dc8:  [<6007f0d0>] vfs_unlink+0x58/0xa3
6fa39df8:  [<60080278>] do_unlinkat+0xd4/0x162
6fa39e48:  [<600517db>] call_rcu_sched+0xe/0x10
6fa39e58:  [<600452a8>] __put_cred+0x58/0x5a
6fa39e78:  [<6007446c>] sys_faccessat+0x154/0x166
6fa39ed8:  [<60080317>] sys_unlink+0x11/0x13
6fa39ee8:  [<60016b80>] handle_syscall+0x58/0x70
6fa39f08:  [<60021377>] userspace+0x2d4/0x381
6fa39fc8:  [<60014507>] fork_handler+0x62/0x69
---[ end trace 70b0ca2ef0266b93 ]---

http://www.mail-archive.com/linux-btrfs@vger.kernel.org/msg09302.htmlSigned-off-by: NSergei Trofimovich <slyfox@gentoo.org>
Reviewed-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Tracepoints can provide insight into why btrfs hits bugs and be greatly
helpful for debugging, e.g
              dd-7822  [000]  2121.641088: btrfs_inode_request: root = 5(FS_TREE), gen = 4, ino = 256, blocks = 8, disk_i_size = 0, last_trans = 8, logged_trans = 0
              dd-7822  [000]  2121.641100: btrfs_inode_new: root = 5(FS_TREE), gen = 8, ino = 257, blocks = 0, disk_i_size = 0, last_trans = 0, logged_trans = 0
 btrfs-transacti-7804  [001]  2146.935420: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29368320 (orig_level = 0), cow_buf = 29388800 (cow_level = 0)
 btrfs-transacti-7804  [001]  2146.935473: btrfs_cow_block: root = 1(ROOT_TREE), refs = 2, orig_buf = 29364224 (orig_level = 0), cow_buf = 29392896 (cow_level = 0)
 btrfs-transacti-7804  [001]  2146.972221: btrfs_transaction_commit: root = 1(ROOT_TREE), gen = 8
   flush-btrfs-2-7821  [001]  2155.824210: btrfs_chunk_alloc: root = 3(CHUNK_TREE), offset = 1103101952, size = 1073741824, num_stripes = 1, sub_stripes = 0, type = DATA
   flush-btrfs-2-7821  [001]  2155.824241: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29388800 (orig_level = 0), cow_buf = 29396992 (cow_level = 0)
   flush-btrfs-2-7821  [001]  2155.824255: btrfs_cow_block: root = 4(DEV_TREE), refs = 2, orig_buf = 29372416 (orig_level = 0), cow_buf = 29401088 (cow_level = 0)
   flush-btrfs-2-7821  [000]  2155.824329: btrfs_cow_block: root = 3(CHUNK_TREE), refs = 2, orig_buf = 20971520 (orig_level = 0), cow_buf = 20975616 (cow_level = 0)
 btrfs-endio-wri-7800  [001]  2155.898019: btrfs_cow_block: root = 5(FS_TREE), refs = 2, orig_buf = 29384704 (orig_level = 0), cow_buf = 29405184 (cow_level = 0)
 btrfs-endio-wri-7800  [001]  2155.898043: btrfs_cow_block: root = 7(CSUM_TREE), refs = 2, orig_buf = 29376512 (orig_level = 0), cow_buf = 29409280 (cow_level = 0)

Here is what I have added:

1) ordere_extent:
        btrfs_ordered_extent_add
        btrfs_ordered_extent_remove
        btrfs_ordered_extent_start
        btrfs_ordered_extent_put

These provide critical information to understand how ordered_extents are
updated.

2) extent_map:
        btrfs_get_extent

extent_map is used in both read and write cases, and it is useful for tracking
how btrfs specific IO is running.

3) writepage:
        __extent_writepage
        btrfs_writepage_end_io_hook

Pages are cirtical resourses and produce a lot of corner cases during writeback,
so it is valuable to know how page is written to disk.

4) inode:
        btrfs_inode_new
        btrfs_inode_request
        btrfs_inode_evict

These can show where and when a inode is created, when a inode is evicted.

5) sync:
        btrfs_sync_file
        btrfs_sync_fs

These show sync arguments.

6) transaction:
        btrfs_transaction_commit

In transaction based filesystem, it will be useful to know the generation and
who does commit.

7) back reference and cow:
	btrfs_delayed_tree_ref
	btrfs_delayed_data_ref
	btrfs_delayed_ref_head
	btrfs_cow_block

Btrfs natively supports back references, these tracepoints are helpful on
understanding btrfs's COW mechanism.

8) chunk:
	btrfs_chunk_alloc
	btrfs_chunk_free

Chunk is a link between physical offset and logical offset, and stands for space
infomation in btrfs, and these are helpful on tracing space things.

9) reserved_extent:
	btrfs_reserved_extent_alloc
	btrfs_reserved_extent_free

These can show how btrfs uses its space.
Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Currently if we have corrupt metadata map_extent_buffer will complain about it,
but not return an error so the caller has no idea a problem was hit.  Fix this.
Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

With the plugging now being explicitly controlled by the
submitter, callers need not pass down unplugging hints
to the block layer. If they want to unplug, it's because they
manually plugged on their own - in which case, they should just
unplug at will.
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

The btrfs fiemap code was incorrectly returning duplicate or overlapping
extents in some cases.  cp was blindly trusting this result and we would
end up with a destination file that was bigger than the original because
some bytes were copied twice.

The fix here adjusts our offsets to make sure we're always moving
forward in the fiemap results.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The Btrfs fiemap code wasn't properly returning delalloc extents,
so applications that trust fiemap to decide if there are holes in the
file see holes instead of delalloc.

This reworks the btrfs fiemap code, adding a get_extent helper that
searches for delalloc ranges and also adding a helper for extent_fiemap
that skips past holes in the file.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Btrfs tracks uptodate state in an rbtree as well as in the
page bits.  This is supposed to enable us to use block sizes other than
the page size, but there are a few parts still missing before that
completely works.

But, our readpage routine trusts this additional range based tracking
of uptodateness, much in the same way the buffer head up to date bits
are trusted for the other filesystems.

The problem is that sometimes we need to allocate memory in order to
split records in the rbtree, even when we are just clearing bits.  This
can be difficult when our clearing function is called GFP_ATOMIC, which
can happen in the releasepage path.

So, what happens today looks like this:

releasepage called with GFP_ATOMIC
btrfs_releasepage calls clear_extent_bit
clear_extent_bit fails to allocate ram, leaving the up to date bit set
btrfs_releasepage returns success

The end result is the page being gone, but btrfs thinking the range is
up to date.   Later on if someone tries to read that same page, the
btrfs readpage code will return immediately thinking the page is already
up to date.

This commit fixes things to fail the releasepage when we can't clear the
extent state bits.  It covers both data pages and metadata tree blocks.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

There is a race where btrfs_releasepage can drop the
page->private contents just as alloc_extent_buffer is setting
up pages for metadata.  Because of how the Btrfs page flags work,
this results in us skipping the crc on the page during IO.

This patch sovles the race by waiting until after the extent buffer
is inserted into the radix tree before it sets page private.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Because NULL is returned when the memory allocation fails,
it is checked whether it is NULL.
Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

btrfs_submit_compressed_read() is lack of memory allocation checks and
corresponding error route.

After this fix, if it comes to "no memory" case, errno will be returned
to userland step by step, and tell users this operation cannot go on.
Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>