In case local OOB data was generated and other device initiated pairing
claiming that it has got OOB data, following crash occurred:

[  222.847853] general protection fault: 0000 [#1] SMP PTI
[  222.848025] CPU: 1 PID: 42 Comm: kworker/u5:0 Tainted: G         C        4.18.0-custom #4
[  222.848158] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[  222.848307] Workqueue: hci0 hci_rx_work [bluetooth]
[  222.848416] RIP: 0010:compute_ecdh_secret+0x5a/0x270 [bluetooth]
[  222.848540] Code: 0c af f5 48 8b 3d 46 de f0 f6 ba 40 00 00 00 be c0 00 60 00 e8 b7 7b c5 f5 48 85 c0 0f 84 ea 01 00 00 48 89 c3 e8 16 0c af f5 <49> 8b 47 38 be c0 00 60 00 8b 78 f8 48 83 c7 48 e8 51 84 c5 f5 48
[  222.848914] RSP: 0018:ffffb1664087fbc0 EFLAGS: 00010293
[  222.849021] RAX: ffff8a5750d7dc00 RBX: ffff8a5671096780 RCX: ffffffffc08bc32a
[  222.849111] RDX: 0000000000000000 RSI: 00000000006000c0 RDI: ffff8a5752003800
[  222.849192] RBP: ffffb1664087fc60 R08: ffff8a57525280a0 R09: ffff8a5752003800
[  222.849269] R10: ffffb1664087fc70 R11: 0000000000000093 R12: ffff8a5674396e00
[  222.849350] R13: ffff8a574c2e79aa R14: ffff8a574c2e796a R15: 020e0e100d010101
[  222.849429] FS:  0000000000000000(0000) GS:ffff8a5752500000(0000) knlGS:0000000000000000
[  222.849518] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  222.849586] CR2: 000055856016a038 CR3: 0000000110d2c005 CR4: 00000000000606e0
[  222.849671] Call Trace:
[  222.849745]  ? sc_send_public_key+0x110/0x2a0 [bluetooth]
[  222.849825]  ? sc_send_public_key+0x115/0x2a0 [bluetooth]
[  222.849925]  smp_recv_cb+0x959/0x2490 [bluetooth]
[  222.850023]  ? _cond_resched+0x19/0x40
[  222.850105]  ? mutex_lock+0x12/0x40
[  222.850202]  l2cap_recv_frame+0x109d/0x3420 [bluetooth]
[  222.850315]  ? l2cap_recv_frame+0x109d/0x3420 [bluetooth]
[  222.850426]  ? __switch_to_asm+0x34/0x70
[  222.850515]  ? __switch_to_asm+0x40/0x70
[  222.850625]  ? __switch_to_asm+0x34/0x70
[  222.850724]  ? __switch_to_asm+0x40/0x70
[  222.850786]  ? __switch_to_asm+0x34/0x70
[  222.850846]  ? __switch_to_asm+0x40/0x70
[  222.852581]  ? __switch_to_asm+0x34/0x70
[  222.854976]  ? __switch_to_asm+0x40/0x70
[  222.857475]  ? __switch_to_asm+0x40/0x70
[  222.859775]  ? __switch_to_asm+0x34/0x70
[  222.861218]  ? __switch_to_asm+0x40/0x70
[  222.862327]  ? __switch_to_asm+0x34/0x70
[  222.863758]  l2cap_recv_acldata+0x266/0x3c0 [bluetooth]
[  222.865122]  hci_rx_work+0x1c9/0x430 [bluetooth]
[  222.867144]  process_one_work+0x210/0x4c0
[  222.868248]  worker_thread+0x41/0x4d0
[  222.869420]  kthread+0x141/0x160
[  222.870694]  ? process_one_work+0x4c0/0x4c0
[  222.871668]  ? kthread_create_worker_on_cpu+0x90/0x90
[  222.872896]  ret_from_fork+0x35/0x40
[  222.874132] Modules linked in: algif_hash algif_skcipher af_alg rfcomm bnep btusb btrtl btbcm btintel snd_intel8x0 cmac intel_rapl_perf vboxvideo(C) snd_ac97_codec bluetooth ac97_bus joydev ttm snd_pcm ecdh_generic drm_kms_helper snd_timer snd input_leds drm serio_raw fb_sys_fops soundcore syscopyarea sysfillrect sysimgblt mac_hid sch_fq_codel ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear hid_generic usbhid hid crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ahci psmouse libahci i2c_piix4 video e1000 pata_acpi
[  222.883153] fbcon_switch: detected unhandled fb_set_par error, error code -16
[  222.886774] fbcon_switch: detected unhandled fb_set_par error, error code -16
[  222.890503] ---[ end trace 6504aa7a777b5316 ]---
[  222.890541] RIP: 0010:compute_ecdh_secret+0x5a/0x270 [bluetooth]
[  222.890551] Code: 0c af f5 48 8b 3d 46 de f0 f6 ba 40 00 00 00 be c0 00 60 00 e8 b7 7b c5 f5 48 85 c0 0f 84 ea 01 00 00 48 89 c3 e8 16 0c af f5 <49> 8b 47 38 be c0 00 60 00 8b 78 f8 48 83 c7 48 e8 51 84 c5 f5 48
[  222.890555] RSP: 0018:ffffb1664087fbc0 EFLAGS: 00010293
[  222.890561] RAX: ffff8a5750d7dc00 RBX: ffff8a5671096780 RCX: ffffffffc08bc32a
[  222.890565] RDX: 0000000000000000 RSI: 00000000006000c0 RDI: ffff8a5752003800
[  222.890571] RBP: ffffb1664087fc60 R08: ffff8a57525280a0 R09: ffff8a5752003800
[  222.890576] R10: ffffb1664087fc70 R11: 0000000000000093 R12: ffff8a5674396e00
[  222.890581] R13: ffff8a574c2e79aa R14: ffff8a574c2e796a R15: 020e0e100d010101
[  222.890586] FS:  0000000000000000(0000) GS:ffff8a5752500000(0000) knlGS:0000000000000000
[  222.890591] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  222.890594] CR2: 000055856016a038 CR3: 0000000110d2c005 CR4: 00000000000606e0

This commit fixes a bug where invalid pointer to crypto tfm was used for
SMP SC ECDH calculation when OOB was in use. Solution is to use same
crypto tfm than when generating OOB material on generate_oob() function.

This bug was introduced in commit c0153b0b ("Bluetooth: let the crypto
subsystem generate the ecc privkey"). Bug was found by fuzzing kernel SMP
implementation using Synopsys Defensics.
Signed-off-by: NMatias Karhumaa <matias.karhumaa@gmail.com>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

A remote device may claim that it has received our OOB data, even
though we never geneated it. Add a new flag to track whether we
actually have OOB data, and ignore the remote peer's flag if haven't
generated OOB data.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Quectel EP06 (and EM06/EG06) supports dynamic configuration of USB
interfaces, without the device changing VID/PID or configuration number.
When the configuration is updated and interfaces are added/removed, the
interface numbers change. This means that the current code for matching
EP06 does not work.

This patch removes the current EP06 interface number match, and replaces
it with a match on class, subclass and protocol. Unfortunately, matching
on those three alone is not enough, as the diag interface exports the
same values as QMI. The other serial interfaces + adb export different
values and do not match.

The diag interface only has two endpoints, while the QMI interface has
three. I have therefore added a check for number of interfaces, and we
ignore the interface if the number of endpoints equals two.
Signed-off-by: NKristian Evensen <kristian.evensen@gmail.com>
Acked-by: NBjørn Mork <bjorn@mork.no>
Acked-by: NDan Williams <dcbw@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch updates license to use SPDX-License-Identifier
instead of verbose license text.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A kernel crash occurrs when defragmented packet is fragmented
in ip_do_fragment().
In defragment routine, skb_orphan() is called and
skb->ip_defrag_offset is set. but skb->sk and
skb->ip_defrag_offset are same union member. so that
frag->sk is not NULL.
Hence crash occurrs in skb->sk check routine in ip_do_fragment() when
defragmented packet is fragmented.

test commands:
   %iptables -t nat -I POSTROUTING -j MASQUERADE
   %hping3 192.168.4.2 -s 1000 -p 2000 -d 60000

splat looks like:
[  261.069429] kernel BUG at net/ipv4/ip_output.c:636!
[  261.075753] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[  261.083854] CPU: 1 PID: 1349 Comm: hping3 Not tainted 4.19.0-rc2+ #3
[  261.100977] RIP: 0010:ip_do_fragment+0x1613/0x2600
[  261.106945] Code: e8 e2 38 e3 fe 4c 8b 44 24 18 48 8b 74 24 08 e9 92 f6 ff ff 80 3c 02 00 0f 85 da 07 00 00 48 8b b5 d0 00 00 00 e9 25 f6 ff ff <0f> 0b 0f 0b 44 8b 54 24 58 4c 8b 4c 24 18 4c 8b 5c 24 60 4c 8b 6c
[  261.127015] RSP: 0018:ffff8801031cf2c0 EFLAGS: 00010202
[  261.134156] RAX: 1ffff1002297537b RBX: ffffed0020639e6e RCX: 0000000000000004
[  261.142156] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880114ba9bd8
[  261.150157] RBP: ffff880114ba8a40 R08: ffffed0022975395 R09: ffffed0022975395
[  261.158157] R10: 0000000000000001 R11: ffffed0022975394 R12: ffff880114ba9ca4
[  261.166159] R13: 0000000000000010 R14: ffff880114ba9bc0 R15: dffffc0000000000
[  261.174169] FS:  00007fbae2199700(0000) GS:ffff88011b400000(0000) knlGS:0000000000000000
[  261.183012] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  261.189013] CR2: 00005579244fe000 CR3: 0000000119bf4000 CR4: 00000000001006e0
[  261.198158] Call Trace:
[  261.199018]  ? dst_output+0x180/0x180
[  261.205011]  ? save_trace+0x300/0x300
[  261.209018]  ? ip_copy_metadata+0xb00/0xb00
[  261.213034]  ? sched_clock_local+0xd4/0x140
[  261.218158]  ? kill_l4proto+0x120/0x120 [nf_conntrack]
[  261.223014]  ? rt_cpu_seq_stop+0x10/0x10
[  261.227014]  ? find_held_lock+0x39/0x1c0
[  261.233008]  ip_finish_output+0x51d/0xb50
[  261.237006]  ? ip_fragment.constprop.56+0x220/0x220
[  261.243011]  ? nf_ct_l4proto_register_one+0x5b0/0x5b0 [nf_conntrack]
[  261.250152]  ? rcu_is_watching+0x77/0x120
[  261.255010]  ? nf_nat_ipv4_out+0x1e/0x2b0 [nf_nat_ipv4]
[  261.261033]  ? nf_hook_slow+0xb1/0x160
[  261.265007]  ip_output+0x1c7/0x710
[  261.269005]  ? ip_mc_output+0x13f0/0x13f0
[  261.273002]  ? __local_bh_enable_ip+0xe9/0x1b0
[  261.278152]  ? ip_fragment.constprop.56+0x220/0x220
[  261.282996]  ? nf_hook_slow+0xb1/0x160
[  261.287007]  raw_sendmsg+0x21f9/0x4420
[  261.291008]  ? dst_output+0x180/0x180
[  261.297003]  ? sched_clock_cpu+0x126/0x170
[  261.301003]  ? find_held_lock+0x39/0x1c0
[  261.306155]  ? stop_critical_timings+0x420/0x420
[  261.311004]  ? check_flags.part.36+0x450/0x450
[  261.315005]  ? _raw_spin_unlock_irq+0x29/0x40
[  261.320995]  ? _raw_spin_unlock_irq+0x29/0x40
[  261.326142]  ? cyc2ns_read_end+0x10/0x10
[  261.330139]  ? raw_bind+0x280/0x280
[  261.334138]  ? sched_clock_cpu+0x126/0x170
[  261.338995]  ? check_flags.part.36+0x450/0x450
[  261.342991]  ? __lock_acquire+0x4500/0x4500
[  261.348994]  ? inet_sendmsg+0x11c/0x500
[  261.352989]  ? dst_output+0x180/0x180
[  261.357012]  inet_sendmsg+0x11c/0x500
[ ... ]

v2:
 - clear skb->sk at reassembly routine.(Eric Dumarzet)

Fixes: fa0f5273 ("ip: use rb trees for IP frag queue.")
Suggested-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tls_sw_sendmsg() allocates plaintext and encrypted SG entries using
function sk_alloc_sg(). In case the number of SG entries hit
MAX_SKB_FRAGS, sk_alloc_sg() returns -ENOSPC and sets the variable for
current SG index to '0'. This leads to calling of function
tls_push_record() with 'sg_encrypted_num_elem = 0' and later causes
kernel crash. To fix this, set the number of SG elements to the number
of elements in plaintext/encrypted SG arrays in case sk_alloc_sg()
returns -ENOSPC.

Fixes: 3c4d7559 ("tls: kernel TLS support")
Signed-off-by: NVakul Garg <vakul.garg@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Netanel Belgazal says:

====================
bug fixes for ENA Ethernet driver
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Added memory barriers where they were missing to support multiple
architectures, and removed redundant ones.

As part of removing the redundant memory barriers and improving
performance, we moved to more relaxed versions of memory barriers,
as well as to the more relaxed version of writel - writel_relaxed,
while maintaining correctness.
Signed-off-by: NNetanel Belgazal <netanel@amazon.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add READ_ONCE calls where necessary (for example when iterating
over a memory field that gets updated by the hardware).
Signed-off-by: NNetanel Belgazal <netanel@amazon.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

acquire the rtnl_lock during device destruction to avoid
using partially destroyed device.

ena_remove() shares almost the same logic as ena_destroy_device(),
so use ena_destroy_device() and avoid duplications.
Signed-off-by: NNetanel Belgazal <netanel@amazon.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ena_destroy_device() can potentially be called twice.
To avoid this, check that the device is running and
only then proceed destroying it.
Signed-off-by: NNetanel Belgazal <netanel@amazon.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When ena_destroy_device() is called from ena_suspend(), the device is
still reachable from the driver. Therefore, the driver can send a command
to the device to free all resources.
However, in all other cases of calling ena_destroy_device(), the device is
potentially in an error state and unreachable from the driver. In these
cases the driver must not send commands to the device.

The current implementation does not request resource freeing from the
device even when possible. We add the graceful parameter to
ena_destroy_device() to enable resource freeing when possible, and
use it in ena_suspend().
Signed-off-by: NNetanel Belgazal <netanel@amazon.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The buffer length field in the ena rx descriptor is 16 bit, and the
current driver passes a full page in each ena rx descriptor.
When PAGE_SIZE equals 64kB or more, the buffer length field becomes
zero.
To solve this issue, limit the ena Rx descriptor to use 16kB even
when allocating 64kB kernel pages. This change would not impact ena
device functionality, as 16kB is still larger than maximum MTU.
Signed-off-by: NNetanel Belgazal <netanel@amazon.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Starting with driver version 1.5.0, in case of a surprise device
unplug, there is a race caused by invoking ena_destroy_device()
from two different places. As a result, the readless register might
be accessed after it was destroyed.
Signed-off-by: NNetanel Belgazal <netanel@amazon.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

According to the documentation in msg_zerocopy.rst, the SO_ZEROCOPY
flag was introduced because send(2) ignores unknown message flags and
any legacy application which was accidentally passing the equivalent of
MSG_ZEROCOPY earlier should not see any new behaviour.

Before commit f214f915 ("tcp: enable MSG_ZEROCOPY"), a send(2) call
which passed the equivalent of MSG_ZEROCOPY without setting SO_ZEROCOPY
would succeed.  However, after that commit, it fails with -ENOBUFS.  So
it appears that the SO_ZEROCOPY flag fails to fulfill its intended
purpose.  Fix it.

Fixes: f214f915 ("tcp: enable MSG_ZEROCOPY")
Signed-off-by: NVincent Whitchurch <vincent.whitchurch@axis.com>
Acked-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When nla_put*() fails after nla_nest_start(), we need
to call nla_nest_cancel() to cancel the message, otherwise
we end up calling nla_nest_end() like a success.

Fixes: 0ed5269f ("net/sched: add tunnel option support to act_tunnel_key")
Cc: Davide Caratti <dcaratti@redhat.com>
Cc: Simon Horman <simon.horman@netronome.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 822fb18a ("xen-netfront: wait xenbus state change when load
module manually") added a new wait queue to wait on for a state change
when the module is loaded manually. Unfortunately there is no wakeup
anywhere to stop that waiting.

Instead of introducing a new wait queue rename the existing
module_unload_q to module_wq and use it for both purposes (loading and
unloading).

As any state change of the backend might be intended to stop waiting
do the wake_up_all() in any case when netback_changed() is called.

Fixes: 822fb18a ("xen-netfront: wait xenbus state change when load module manually")
Cc: <stable@vger.kernel.org> #4.18
Signed-off-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 3559d81e ("r8169: simplify rtl_hw_start_8169") changed order of
two register writes:
1) Caused RxConfig to be written before TX / RX is enabled,
2) Caused TxConfig to be written before TX / RX is enabled.

At least on XIDs 10000000 ("RTL8169sb/8110sb") and
18000000 ("RTL8169sc/8110sc") such writes are ignored by the chip, leaving
values in these registers intact.

Change 1) was reverted by
commit 05212ba8 ("r8169: set RxConfig after tx/rx is enabled for RTL8169sb/8110sb devices"),
however change 2) wasn't.

In practice, this caused TxConfig's "InterFrameGap time" and "Max DMA Burst
Size per Tx DMA Burst" bits to be zero dramatically reducing TX performance
(in my tests it dropped from around 500Mbps to around 50Mbps).

This patch fixes the issue by moving TxConfig register write a bit later in
the code so it happens after TX / RX is already enabled.

Fixes: 05212ba8 ("r8169: set RxConfig after tx/rx is enabled for RTL8169sb/8110sb devices")
Signed-off-by: NMaciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

__tipc_nl_compat_dumpit() uses a netlink_callback on stack,
so the only way to align it with other ->dumpit() call path
is calling tipc_dump_start() and tipc_dump_done() directly
inside it. Otherwise ->dumpit() would always get NULL from
cb->args[].

But tipc_dump_start() uses sock_net(cb->skb->sk) to retrieve
net pointer, the cb->skb here doesn't set skb->sk, the net pointer
is saved in msg->net instead, so introduce a helper function
__tipc_dump_start() to pass in msg->net.

Ying pointed out cb->args[0...3] are already used by other
callbacks on this call path, so we can't use cb->args[0] any
more, use cb->args[4] instead.

Fixes: 9a07efa9 ("tipc: switch to rhashtable iterator")
Reported-and-tested-by: syzbot+e93a2c41f91b8e2c7d9b@syzkaller.appspotmail.com
Cc: Jon Maloy <jon.maloy@ericsson.com>
Cc: Ying Xue <ying.xue@windriver.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2018-09-05

This pull request contains some fixes for mlx5 etherent netdevice and
core driver.

Please pull and let me know if there's any problem.

For -stable v4.9:
('net/mlx5: Fix debugfs cleanup in the device init/remove flow')

For -stable v4.12:
("net/mlx5: E-Switch, Fix memory leak when creating switchdev mode FDB tables")

For -stable v4.13:
("net/mlx5: Fix use-after-free in self-healing flow")

For -stable v4.14:
("net/mlx5: Check for error in mlx5_attach_interface")

For -stable v4.15:
("net/mlx5: Fix not releasing read lock when adding flow rules")

For -stable v4.17:
("net/mlx5: Fix possible deadlock from lockdep when adding fte to fg")

For -stable v4.18:
("net/mlx5: Use u16 for Work Queue buffer fragment size")
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Julian Wiedmann says:

====================
net/iucv: fixes 2018-09-05

please apply three straight-forward fixes for iucv. One that prevents
leaking the skb on malformed inbound packets, one to fix the error
handling on transmit error, and one to get rid of a compile warning.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes a compile warning.
Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When sending an skb, afiucv_hs_send() bails out on various error
conditions. But currently the caller has no way of telling whether the
skb was freed or not - resulting in potentially either
a) leaked skbs from iucv_send_ctrl(), or
b) double-free's from iucv_sock_sendmsg().

As dev_queue_xmit() will always consume the skb (even on error), be
consistent and also free the skb from all other error paths. This way
callers no longer need to care about managing the skb.
Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: NUrsula Braun <ubraun@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Inbound packets may have any combination of flag bits set in their iucv
header. If we don't know how to handle a specific combination, drop the
skb instead of leaking it.

To clarify what error is returned in this case, replace the hard-coded
0 with the corresponding macro.
Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If users try to install act_tunnel_key 'set' rules with duplicate values
of 'index', the tunnel metadata are allocated, but never released. Then,
kmemleak complains as follows:

 # tc a a a tunnel_key set src_ip 1.1.1.1 dst_ip 2.2.2.2 id 42 index 111
 # echo clear > /sys/kernel/debug/kmemleak
 # tc a a a tunnel_key set src_ip 1.1.1.1 dst_ip 2.2.2.2 id 42 index 111
 Error: TC IDR already exists.
 We have an error talking to the kernel
 # echo scan > /sys/kernel/debug/kmemleak
 # cat /sys/kernel/debug/kmemleak
 unreferenced object 0xffff8800574e6c80 (size 256):
   comm "tc", pid 5617, jiffies 4298118009 (age 57.990s)
   hex dump (first 32 bytes):
     00 00 00 00 00 00 00 00 00 1c e8 b0 ff ff ff ff  ................
     81 24 c2 ad ff ff ff ff 00 00 00 00 00 00 00 00  .$..............
   backtrace:
     [<00000000b7afbf4e>] tunnel_key_init+0x8a5/0x1800 [act_tunnel_key]
     [<000000007d98fccd>] tcf_action_init_1+0x698/0xac0
     [<0000000099b8f7cc>] tcf_action_init+0x15c/0x590
     [<00000000dc60eebe>] tc_ctl_action+0x336/0x5c2
     [<000000002f5a2f7d>] rtnetlink_rcv_msg+0x357/0x8e0
     [<000000000bfe7575>] netlink_rcv_skb+0x124/0x350
     [<00000000edab656f>] netlink_unicast+0x40f/0x5d0
     [<00000000b322cdcb>] netlink_sendmsg+0x6e8/0xba0
     [<0000000063d9d490>] sock_sendmsg+0xb3/0xf0
     [<00000000f0d3315a>] ___sys_sendmsg+0x654/0x960
     [<00000000c06cbd42>] __sys_sendmsg+0xd3/0x170
     [<00000000ce72e4b0>] do_syscall_64+0xa5/0x470
     [<000000005caa2d97>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
     [<00000000fac1b476>] 0xffffffffffffffff

This problem theoretically happens also in case users attempt to setup a
geneve rule having wrong configuration data, or when the kernel fails to
allocate 'params_new'. Ensure that tunnel_key_init() releases the tunnel
metadata also in the above conditions.

Addresses-Coverity-ID: 1373974 ("Resource leak")
Fixes: d0f6dd8a ("net/sched: Introduce act_tunnel_key")
Fixes: 0ed5269f ("net/sched: add tunnel option support to act_tunnel_key")
Signed-off-by: NDavide Caratti <dcaratti@redhat.com>
Acked-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Before we unlock the sock in tipc_release(), we have to
detach sk->sk_socket from sk, otherwise a parallel
tipc_sk_fill_sock_diag() could stil read it after we
free this socket.

Fixes: c30b70de ("tipc: implement socket diagnostics for AF_TIPC")
Reported-and-tested-by: syzbot+48804b87c16588ad491d@syzkaller.appspotmail.com
Cc: Jon Maloy <jon.maloy@ericsson.com>
Cc: Ying Xue <ying.xue@windriver.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is a false positive report due to incorrect nested lock
annotations as we lock multiple fgs with the same subclass.
Instead of locking all fgs only lock the one being used as was
done before.

Fixes: bd71b08e ("net/mlx5: Support multiple updates of steering rules in parallel")
Signed-off-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Copy and paste bug was introduced in the offending patch.
We need to write udp source port value into the headers value and not
headers criteria "mask".

Fixes: 142644f8 ("net/mlx5e: Ethtool steering flow parsing refactoring")
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Currently, mlx5_attach_interface does not check for error
after calling intf->attach or intf->add. When these two calls
fails, the client is not initialized and will cause issues such as
kernel panic on invalid address in the teardown path (mlx5_detach_interface)

Fixes: 737a234b ("net/mlx5: Introduce attach/detach to interface API")
Signed-off-by: NHuy Nguyen <huyn@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

The PCI BDF is not unique. PCI domain must also be considered when
searching for the next physical device during lag setup. Example below:

mlx5_core 0000:01:00.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(128) RxCqeCmprss(0)
mlx5_core 0000:01:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(128) RxCqeCmprss(0)
mlx5_core 0001:01:00.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(128) RxCqeCmprss(0)
mlx5_core 0001:01:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(128) RxCqeCmprss(0)
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NAviv Heller <avivh@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

If building match list fg fails and we never jumped to
search_again_locked label then the function returned without
unlocking the read lock.

Fixes: bd71b08e ("net/mlx5: Support multiple updates of steering rules in parallel")
Signed-off-by: NRoi Dayan <roid@mellanox.com>
Reviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

The memory allocated for the slow path table flow group input structure
was not freed upon successful return, fix that.

Fixes: 1967ce6e ("net/mlx5: E-Switch, Refactor fast path FDB table creation in switchdev mode")
Signed-off-by: NRaed Salem <raeds@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Minimal stride size is 16.
Hence, the number of strides in a fragment (of PAGE_SIZE)
is <= PAGE_SIZE / 16 <= 4K.

u16 is sufficient to represent this.

Fixes: d7037ad7 ("net/mlx5: Fix QP fragmented buffer allocation")
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Reviewed-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Minimal stride size is 16.
Hence, the number of strides in a fragment (of PAGE_SIZE)
is <= PAGE_SIZE / 16 <= 4K.

u16 is sufficient to represent this.

Fixes: 388ca8be ("IB/mlx5: Implement fragmented completion queue (CQ)")
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Reviewed-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

When initializing the device (procedure init_one), the driver
calls mlx5_pci_init to perform pci initialization. As part of this
initialization, mlx5_pci_init creates a debugfs directory.
If this creation fails, init_one aborts, returning failure to
the caller (which is the probe method caller).

The main reason for such a failure to occur is if the debugfs
directory already exists. This can happen if the last time
mlx5_pci_close was called, debugfs_remove (silently) failed due
to the debugfs directory not being empty.

Guarantee that such a debugfs_remove failure will not occur by
instead calling debugfs_remove_recursive in procedure mlx5_pci_close.

Fixes: 59211bd3 ("net/mlx5: Split the load/unload flow into hardware and software flows")
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

When the mlx5 health mechanism detects a problem while the driver
is in the middle of init_one or remove_one, the driver needs to prevent
the health mechanism from scheduling future work; if future work
is scheduled, there is a problem with use-after-free: the system WQ
tries to run the work item (which has been freed) at the scheduled
future time.

Prevent this by disabling work item scheduling in the health mechanism
when the driver is in the middle of init_one() or remove_one().

Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Reviewed-by: NFeras Daoud <ferasda@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

With performance optimization the spi transfer and messages of basic
register operations like qcaspi_read_register moved into the private
driver structure. But they weren't protected against mutual access
(e.g. between driver kthread and ethtool). So dumping the QCA7000
registers via ethtool during network traffic could make spi_sync
hang forever, because the completion in spi_message is overwritten.

So revert the optimization completely.

Fixes: 291ab06e ("net: qualcomm: new Ethernet over SPI driver for QCA700")
Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

DMA allocated memory is lost in be_cmd_get_profile_config() when we
call it with non-NULL port_res parameter.
Signed-off-by: NPetr Oros <poros@redhat.com>
Reviewed-by: NIvan Vecera <ivecera@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

MC-aware mode was recently enabled by mlxsw on Spectrum switches in
commit 7b819530 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw
ports"). Unfortunately, testing has shown that the fix is incomplete and
in the presented form actually makes the problem even worse, because any
amount of MC traffic causes UC disruption.

The reason for this is that currently, mlxsw configures the MC-specific
TCs (8..15) to map to pool 0. It also configures a maximum buffer size
of 0, but for MC traffic that maximum is disregarded and not part of the
quota. Therefore MC traffic is always admitted to the egress buffer.

Fix the configuration by directing the MC TCs into pool 15, which is
dedicated to MC traffic and recognized as such by the silicon.

Fixes: 7b819530 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports")
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Must perform TXQ teardown before unregistering interfaces in
    mac80211, from Toke Høiland-Jørgensen.

 2) Don't allow creating mac80211_hwsim with less than one channel, from
    Johannes Berg.

 3) Division by zero in cfg80211, fix from Johannes Berg.

 4) Fix endian issue in tipc, from Haiqing Bai.

 5) BPF sockmap use-after-free fixes from Daniel Borkmann.

 6) Spectre-v1 in mac80211_hwsim, from Jinbum Park.

 7) Missing rhashtable_walk_exit() in tipc, from Cong Wang.

 8) Revert kvzalloc() conversion of AF_PACKET, it breaks mmap() when
    kvzalloc() tries to use kmalloc() pages. From Eric Dumazet.

 9) Fix deadlock in hv_netvsc, from Dexuan Cui.

10) Do not restart timewait timer on RST, from Florian Westphal.

11) Fix double lwstate refcount grab in ipv6, from Alexey Kodanev.

12) Unsolicit report count handling is off-by-one, fix from Hangbin Liu.

13) Sleep-in-atomic in cadence driver, from Jia-Ju Bai.

14) Respect ttl-inherit in ip6 tunnel driver, from Hangbin Liu.

15) Use-after-free in act_ife, fix from Cong Wang.

16) Missing hold to meta module in act_ife, from Vlad Buslov.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (91 commits)
  net: phy: sfp: Handle unimplemented hwmon limits and alarms
  net: sched: action_ife: take reference to meta module
  act_ife: fix a potential use-after-free
  net/mlx5: Fix SQ offset in QPs with small RQ
  tipc: correct spelling errors for tipc_topsrv_queue_evt() comments
  tipc: correct spelling errors for struct tipc_bc_base's comment
  bnxt_en: Do not adjust max_cp_rings by the ones used by RDMA.
  bnxt_en: Clean up unused functions.
  bnxt_en: Fix firmware signaled resource change logic in open.
  sctp: not traverse asoc trans list if non-ipv6 trans exists for ipv6_flowlabel
  sctp: fix invalid reference to the index variable of the iterator
  net/ibm/emac: wrong emac_calc_base call was used by typo
  net: sched: null actions array pointer before releasing action
  vhost: fix VHOST_GET_BACKEND_FEATURES ioctl request definition
  r8169: add support for NCube 8168 network card
  ip6_tunnel: respect ttl inherit for ip6tnl
  mac80211: shorten the IBSS debug messages
  mac80211: don't Tx a deauth frame if the AP forbade Tx
  mac80211: Fix station bandwidth setting after channel switch
  mac80211: fix a race between restart and CSA flows
  ...