Use to_delayed_work() instead of open-coding it.
Signed-off-by: NGeliang Tang <geliangtang@163.com>
Reviewed-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <a@unstable.cc>

Use list_for_each_entry_safe() instead of list_for_each_safe() to
simplify the code.
Signed-off-by: NGeliang Tang <geliangtang@163.com>
Acked-by: NAntonio Quartulli <a@unstable.cc>
Reviewed-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: NAntonio Quartulli <a@unstable.cc>

Use a static string when showing table headers rather then
a nonsense parametric one with fixed arguments.

It is easier to grep and it does not need to be recomputed
at runtime each time.
Reported-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAntonio Quartulli <a@unstable.cc>
[sven@narfation.org: fix conflicts with current version]
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>

Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: NAntonio Quartulli <a@unstable.cc>

The sysfs ABI documentation files and the batman-adv.txt are maintained by
the BATMAN ADVANCED maintainers and patches for them should therefore be
sent to them.
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NAntonio Quartulli <a@unstable.cc>

The mailing list of b.a.t.m.a.n@lists.open-mesh.org is moderated for
non-subscribers and non-whitelisted addresses. Such mails will be delayed
but the sender will not be informed about the moderation.
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NAntonio Quartulli <a@unstable.cc>

The ethtool api {get|set}_settings is deprecated.
We move the fec_mpc52xx driver to new api {get|set}_link_ksettings.
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move the fs-enet driver to new api {get|set}_link_ksettings.
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move the ucc driver to new api {get|set}_link_ksettings.
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move the gianfar driver to new api {get|set}_link_ksettings.
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The vsock_transport structure is never modified, so declare it as const.

Done with the help of Coccinelle.
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The xgene_cle_ops structure is never modified, so declare it as const.

Done with the help of Coccinelle.
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Acked-by: NIyappan Subramanian <isubramanian@apm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In presence of inelastic flows and stress, we can call
fq_codel_drop() for every packet entering fq_codel qdisc.

fq_codel_drop() is quite expensive, as it does a linear scan
of 4 KB of memory to find a fat flow.
Once found, it drops the oldest packet of this flow.

Instead of dropping a single packet, try to drop 50% of the backlog
of this fat flow, with a configurable limit of 64 packets per round.

TCA_FQ_CODEL_DROP_BATCH_SIZE is the new attribute to make this
limit configurable.

With this strategy the 4 KB search is amortized to a single cache line
per drop [1], so fq_codel_drop() no longer appears at the top of kernel
profile in presence of few inelastic flows.

[1] Assuming a 64byte cache line, and 1024 buckets
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NDave Taht <dave.taht@gmail.com>
Cc: Jonathan Morton <chromatix99@gmail.com>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Dave Taht
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Aligning the reception data size is not required.
Signed-off-by: NKazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
Signed-off-by: NYoshihiro Kaneko <ykaneko0929@gmail.com>
Tested-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-next-for-davem-2016-05-02' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers patches for 4.7

Major changes:

brcmfmac

* add support for nl80211 BSS_SELECT feature

mwifiex

* add platform specific wakeup interrupt support

ath10k

* implement set_tsf() for 10.2.4 branch
* remove rare MSI range support
* remove deprecated firmware API 1 support

ath9k

* add module parameter to invert LED polarity

wcn36xx

* fixes to get the driver properly working on Dragonboard 410c
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Locally generated TCP GSO packets having to go through a GRE/SIT/IPIP
tunnel have to go through an expensive skb_unclone()

Reallocating skb->head is a lot of work.

Test should really check if a 'real clone' of the packet was done.

TCP does not care if the original gso_type is changed while the packet
travels in the stack.

This adds skb_header_unclone() which is a variant of skb_clone()
using skb_header_cloned() check instead of skb_cloned().

This variant can probably be used from other points.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- trans_timeout is incremented when tx queue timed out (tx watchdog).
- tx_maxrate is set via sysfs

Moving tx_maxrate to read-mostly part shrinks the struct by 64 bytes.
While at it, also move trans_timeout (it is out-of-place in the
'write-mostly' part).
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Nikolay Aleksandrov says:

====================
bridge: per-vlan stats

This set adds support for bridge per-vlan statistics.
In order to be able to dump statistics for many vlans we need a way to
continue dumping after reaching maximum size, thus patches 01 and 02 extend
the new stats API with a per-device extended link stats attribute and
callback which can save its local state and continue where it left off
afterwards. I considered using the already existing "fill_xstats" callback
but it gets confusing since we need to separate the linkinfo dump from the
new stats api dump and adding a flag/argument to do that just looks messy.
I don't think the rtnl_link_ops size is an issue, so adding these seemed
like the cleaner approach.

Patches 03 and 04 add the stats support and netlink dump support
respectively. The stats accounting is controlled via a bridge option which
is default off, thus the performance impact is kept minimal.
I've tested this set with both old and modified iproute2, kmemleak on and
some traffic stress tests while adding/removing vlans and ports.

v3:
 - drop the RCU pvid patch and remove one pointer fetch as requested
 - make stats accounting optional with default to off, the option is in the
   same cache line as vlan_proto and vlan_enabled, so it is already fetched
   before the fast path check thus the performance impact is minimal, this
   also allows us to avoid one vlan lookup and return early when using pvid
 - rebased and retested

v2:
 - Improve the error checking, rename lidx to prividx and save the current
   idx user instead of restricting it to one in patch 01
 - squash patch 02 into 01 and remove the restriction
 - add callback descriptions, improve the size calculation and change the
   xstats message structure to have an embedding level per rtnl link type
   so we can avoid one call to get the link type (and thus filter on it)
   and also each link type can now have any number of private attributes
   inside
 - fix a problem where the vlan stats are not dumped if the bridge has 0
   vlans on it but has vlans on the ports, add bridge link type private
   attributes and also add paddings for future extensions to avoid at least
   a few netlink attributes and improve struct alignment
 - drop the is_skb_forwardable argument constifying patch as it's not
   needed anymore, but it's a nice cleanup which I'll send separately
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a new LINK_XSTATS_TYPE_BRIDGE attribute and implement the
RTM_GETSTATS callbacks for IFLA_STATS_LINK_XSTATS (fill_linkxstats and
get_linkxstats_size) in order to export the per-vlan stats.
The paddings were added because soon these fields will be needed for
per-port per-vlan stats (or something else if someone beats me to it) so
avoiding at least a few more netlink attributes.
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for per-VLAN Tx/Rx statistics. Every global vlan context gets
allocated a per-cpu stats which is then set in each per-port vlan context
for quick access. The br_allowed_ingress() common function is used to
account for Rx packets and the br_handle_vlan() common function is used
to account for Tx packets. Stats accounting is performed only if the
bridge-wide vlan_stats_enabled option is set either via sysfs or netlink.
A struct hole between vlan_enabled and vlan_proto is used for the new
option so it is in the same cache line. Currently it is binary (on/off)
but it is intentionally restricted to exactly 0 and 1 since other values
will be used in the future for different purposes (e.g. per-port stats).
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add callbacks to calculate the size and fill link extended statistics
which can be split into multiple messages and are dumped via the new
rtnl stats API (RTM_GETSTATS) with the IFLA_STATS_LINK_XSTATS attribute.
Also add that attribute to the idx mask check since it is expected to
be able to save state and resume dumping (e.g. future bridge per-vlan
stats will be dumped via this attribute and callbacks).
Each link type should nest its private attributes under the per-link type
attribute. This allows to have any number of separated private attributes
and to avoid one call to get the dev link type.
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The new prividx argument allows the current dumping device to save a
private state counter which would enable it to continue dumping from
where it left off. And the idxattr is used to save the current idx user
so multiple prividx using attributes can be requested at the same time
as suggested by Roopa Prabhu.
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Tom Herbert says:

====================
net: Cleanup IPv6 ip tunnels

The IPv6 tunnel code is very different from IPv4 code. There is a lot
of redundancy with the IPv4 code, particularly in the GRE tunneling.

This patch set cleans up the tunnel code to make the IPv6 code look
more like the IPv4 code and use common functions between the two
stacks where possible.

This work should make it easier to maintain and extend the IPv6 ip
tunnels.

Items in this patch set:
  - Cleanup IPv6 tunnel receive path (ip6_tnl_rcv). Includes using
    gro_cells and exporting ip6_tnl_rcv so the ip6_gre can call it
  - Move GRE functions to common header file (tx functions) or
    gre_demux.c (rx functions like gre_parse_header)
  - Call common GRE functions from IPv6 GRE
  - Create ip6_tnl_xmit (to be like ip_tunnel_xmit)

Tested:
  Ran super_netperf tests for TCP_RR and TCP_STREAM for:
    - IPv4 over gre, gretap, gre6, gre6tap
    - IPv6 over gre, gretap, gre6, gre6tap
    - ipip
    - ip6ip6
    - ipip/gue
    - IPv6 over gre/gue
    - IPv4 over gre/gue
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Changes in GREv6 transmit path:
  - Call gre_checksum, remove gre6_checksum
  - Rename ip6gre_xmit2 to __gre6_xmit
  - Call gre_build_header utility function
  - Call ip6_tnl_xmit common function
  - Call ip6_tnl_change_mtu, eliminate ip6gre_tunnel_change_mtu
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A few generic changes to generalize tunnels in IPv6:
  - Export ip6_tnl_change_mtu so that it can be called by ip6_gre
  - Add tun_hlen to ip6_tnl structure.
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Create common functions for both IPv4 and IPv6 GRE in transmit. These
are put into gre.h.

Common functions are for:
  - GRE checksum calculation. Move gre_checksum to gre.h.
  - Building a GRE header. Move GRE build_header and rename
    gre_build_header.
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch renames ip6_tnl_xmit2 to ip6_tnl_xmit and exports it. Other
users like GRE will be able to call this. The original ip6_tnl_xmit
function is renamed to ip6_tnl_start_xmit (this is an ndo_start_xmit
function).
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- Create gre_rcv function. This calls gre_parse_header and ip6gre_rcv.
  - Call ip6_tnl_rcv. Doing this and using gre_parse_header eliminates
    most of the code in ip6gre_rcv.
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Several of the GRE functions defined in net/ipv4/ip_gre.c are usable
for IPv6 GRE implementation (that is they are protocol agnostic).

These include:
  - GRE flag handling functions are move to gre.h
  - GRE build_header is moved to gre.h and renamed gre_build_header
  - parse_gre_header is moved to gre_demux.c and renamed gre_parse_header
  - iptunnel_pull_header is taken out of gre_parse_header. This is now
    done by caller. The header length is returned from gre_parse_header
    in an int* argument.
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some basic changes to make IPv6 tunnel receive path look more like
IPv4 path:
  - Make ip6_tnl_rcv non-static so that GREv6 and others can call it
  - Make ip6_tnl_rcv look like ip_tunnel_rcv
  - Switch to gro_cells_receive
  - Make ip6_tnl_rcv non-static and export it
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
net: make TCP preemptible

Most of TCP stack assumed it was running from BH handler.

This is great for most things, as TCP behavior is very sensitive
to scheduling artifacts.

However, the prequeue and backlog processing are problematic,
as they need to be flushed with BH being blocked.

To cope with modern needs, TCP sockets have big sk_rcvbuf values,
in the order of 16 MB, and soon 32 MB.
This means that backlog can hold thousands of packets, and things
like TCP coalescing or collapsing on this amount of packets can
lead to insane latency spikes, since BH are blocked for too long.

It is time to make UDP/TCP stacks preemptible.

Note that fast path still runs from BH handler.

v2: Added "tcp: make tcp_sendmsg() aware of socket backlog"
    to reduce latency problems of large sends.

v3: Fixed a typo in tcp_cdg.c
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Large sendmsg()/write() hold socket lock for the duration of the call,
unless sk->sk_sndbuf limit is hit. This is bad because incoming packets
are parked into socket backlog for a long time.
Critical decisions like fast retransmit might be delayed.
Receivers have to maintain a big out of order queue with additional cpu
overhead, and also possible stalls in TX once windows are full.

Bidirectional flows are particularly hurt since the backlog can become
quite big if the copy from user space triggers IO (page faults)

Some applications learnt to use sendmsg() (or sendmmsg()) with small
chunks to avoid this issue.

Kernel should know better, right ?

Add a generic sk_flush_backlog() helper and use it right
before a new skb is allocated. Typically we put 64KB of payload
per skb (unless MSG_EOR is requested) and checking socket backlog
every 64KB gives good results.

As a matter of fact, tests with TSO/GSO disabled give very nice
results, as we manage to keep a small write queue and smaller
perceived rtt.

Note that sk_flush_backlog() maintains socket ownership,
so is not equivalent to a {release_sock(sk); lock_sock(sk);},
to ensure implicit atomicity rules that sendmsg() was
giving to (possibly buggy) applications.

In this simple implementation, I chose to not call tcp_release_cb(),
but we might consider this later.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Socket backlog processing is a major latency source.

With current TCP socket sk_rcvbuf limits, I have sampled __release_sock()
holding cpu for more than 5 ms, and packets being dropped by the NIC
once ring buffer is filled.

All users are now ready to be called from process context,
we can unblock BH and let interrupts be serviced faster.

cond_resched_softirq() could be removed, as it has no more user.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sctp_inq_push() will soon be called without BH being blocked
when generic socket code flushes the socket backlog.

It is very possible SCTP can be converted to not rely on BH,
but this needs to be done by SCTP experts.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

UDP uses the generic socket backlog code, and this will soon
be changed to not disable BH when protocol is called back.

We need to use appropriate SNMP accessors.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

DCCP uses the generic backlog code, and this will soon
be changed to not disable BH when protocol is called back.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

AFAIK, nothing in current TCP stack absolutely wants BH
being disabled once socket is owned by a thread running in
process context.

As mentioned in my prior patch ("tcp: give prequeue mode some care"),
processing a batch of packets might take time, better not block BH
at all.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We want to to make TCP stack preemptible, as draining prequeue
and backlog queues can take lot of time.

Many SNMP updates were assuming that BH (and preemption) was disabled.

Need to convert some __NET_INC_STATS() calls to NET_INC_STATS()
and some __TCP_INC_STATS() to TCP_INC_STATS()

Before using this_cpu_ptr(net->ipv4.tcp_sk) in tcp_v4_send_reset()
and tcp_v4_send_ack(), we add an explicit preempt disabled section.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Iyappan Subramanian says:

====================
drivers: net: xgene: fix: Get channel number from device binding

This patch set adds 'channel' property to get ethernet to CPU channel number,
thus decoupling the Linux driver from static resource selection.

v2: Address review comments from v1
- removed irq reference from Linux driver
- added 'channel' property to get ethernet to CPU channel number

v1:
- Initial version
====================
Signed-off-by: NIyappan Subramanian <isubramanian@apm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Added 'channel' property, describing ethernet to CPU channel number.
Signed-off-by: NIyappan Subramanian <isubramanian@apm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>