- 12 6月, 2008 13 次提交
-
-
由 Lennert Buytenhek 提交于
The only user of the ETH_MIB_VERY_LONG_NAME_HERE defines is the eth_update_mib_counters() function. Get rid of the defines by open-coding the register offsets in the latter. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Acked-by: NDale Farnsworth <dale@farnsworth.org>
-
由 Lennert Buytenhek 提交于
Get rid of RX_BUF_OFFSET (which is synonymous with ETH_HW_IP_ALIGN). Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Acked-by: NDale Farnsworth <dale@farnsworth.org>
-
由 Lennert Buytenhek 提交于
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Acked-by: NDale Farnsworth <dale@farnsworth.org>
-
由 Lennert Buytenhek 提交于
Replace the nondescriptive names ETH_INT_UNMASK_ALL and ETH_INT_UNMASK_ALL_EXT by names of the actual fields being masked and unmasked in the various writes to the interrupt mask registers. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Acked-by: NDale Farnsworth <dale@farnsworth.org>
-
由 Lennert Buytenhek 提交于
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Acked-by: NDale Farnsworth <dale@farnsworth.org>
-
由 Lennert Buytenhek 提交于
None of the port status register bit defines are ever used in the mv643xx_eth driver -- nuke them all. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Acked-by: NDale Farnsworth <dale@farnsworth.org>
-
由 Lennert Buytenhek 提交于
Over half of the port serial control register bit defines are never used, and the PORT_SERIAL_CONTROL_DEFAULT_VALUE define is never used either. Keep only those defines that are actually used. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Acked-by: NDale Farnsworth <dale@farnsworth.org>
-
由 Lennert Buytenhek 提交于
Delete the defines for SDMA config register bit values that are never used in the driver, to tidy up the code some more. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Acked-by: NDale Farnsworth <dale@farnsworth.org>
-
由 Lennert Buytenhek 提交于
The port config extend register is never changed at run time. Document the meaning of the initial value, and delete the defines for the individual bits in this register. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Acked-by: NDale Farnsworth <dale@farnsworth.org>
-
由 Lennert Buytenhek 提交于
The mv643xx_eth driver only ever changes bit 0 of the port config register at run time, the rest of the register bits are fixed (and always zero). Document the meaning of the chosen default value, and get rid of all the defines for each of the individual bits. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Acked-by: NDale Farnsworth <dale@farnsworth.org>
-
由 Lennert Buytenhek 提交于
Shorten the various oversized register names in mv643xx_eth.c, to increase readability. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Acked-by: NDale Farnsworth <dale@farnsworth.org>
-
由 Lennert Buytenhek 提交于
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Acked-by: NDale Farnsworth <dale@farnsworth.org>
-
由 Lennert Buytenhek 提交于
This patch performs a reverse topological sort of all functions in mv643xx_eth.c, so that we can get rid of all forward declarations, and end up with a more understandable driver due to related functions being grouped together. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Acked-by: NDale Farnsworth <dale@farnsworth.org>
-
- 29 4月, 2008 4 次提交
-
-
由 Lennert Buytenhek 提交于
There exist chips with up to four mv643xx_eth silicon blocks but only one external SMI (MII management) interface -- the SMI logic of the first block is shared by all the blocks. Handle this by allowing a per-port override of which mv643xx_eth_shared's SMI registers (and spinlock) to use. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Acked-by: NNicolas Pitre <nico@marvell.com> Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
-
由 Lennert Buytenhek 提交于
Make t_clk configurable via platform device data (with the current hardcoded value, 133 MHz, being the default), as it varies across different chip families. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Acked-by: NNicolas Pitre <nico@marvell.com> Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
-
由 Lennert Buytenhek 提交于
Make it possible to pass mbus_dram_target_info to the mv643xx_eth driver via the platform data, and make the mv643xx_eth driver program the window registers based on this data if it is passed in. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Reviewed-by: NTzachi Perelstein <tzachi@marvell.com> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
-
由 Lennert Buytenhek 提交于
Move mv643xx_eth's static state (ethernet register block base address and MII management interface spinlock) into a struct hanging off the shared platform device. This is necessary to support chips that contain multiple mv643xx_eth silicon blocks. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Acked-by: NNicolas Pitre <nico@marvell.com> Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
-
- 25 4月, 2008 1 次提交
-
-
由 Kay Sievers 提交于
Since 43cc71ee, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable network platform drivers, to re-enable auto loading. NOTE: didn't change drivers/net/fs_enet/fs_enet-main.c "old binding" support. That looks problematic in the first place (it even uses the ancient "struct device_driver" binding scheme for platform_bus!) and I suspect it will vanish soonish when arch/powerpc rules the world. Also, drivers/net/ne.c would have needed more thought to sort out. [akpm@linux-foundation.org: fix sgiseeq.c] [dbrownell@users.sourceforge.net: more drivers, registration fixes] Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: Scott Wood <scottwood@freescale.com> Cc: Vitaly Bordug <vitb@kernel.crashing.org> Cc: Dale Farnsworth <dale@farnsworth.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Andrew Victor <andrew@sanpeople.com> Cc: Bryan Wu <bryan.wu@analog.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 17 4月, 2008 7 次提交
-
-
由 Lennert Buytenhek 提交于
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Reviewed-by: NTzachi Perelstein <tzachi@marvell.com> Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
-
由 Lennert Buytenhek 提交于
When there are multiple mv643xx_eth silicon blocks in the system, don't print an initialisation message for each and every one of them. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Reviewed-by: NTzachi Perelstein <tzachi@marvell.com> Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
-
由 Lennert Buytenhek 提交于
Pass a struct mv643xx_private * to the register accessor functions, as a preparation for having multiple mv643xx_eth silicon blocks. (Since this causes some 80 column straddling, and the mv_ prefix is useless anyway, rename mv_read to rdl and mv_write to wrl to compensate.) Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Reviewed-by: NTzachi Perelstein <tzachi@marvell.com> Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
-
由 Lennert Buytenhek 提交于
In error and warning printks, always report the netdevice name instead of the port index (the latter has no meaning when there are multiple mv643xx_eth silicon blocks in the system.) Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Reviewed-by: NTzachi Perelstein <tzachi@marvell.com> Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
-
由 Lennert Buytenhek 提交于
Instead of identifying individual mv643xx ethernet ports by only their port number, identify them by their struct mv643xx_private *, as just a port number has no meaning when there are multiple mv643xx_eth silicon blocks in the system. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Reviewed-by: NTzachi Perelstein <tzachi@marvell.com> Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
-
由 Lennert Buytenhek 提交于
- Remove unused MV643XX_DEFAULT_[RT]X_QUEUE_SIZE definitions. - Remove ETH_TARGET enum -- it isn't used anywhere in the driver, and isn't even valid for non-mv643xx chip models, as those use different MBUS target IDs. - Clean up comment and control flow in mv643xx_eth_change_mtu(). - Use mp->dev instead of mp->mii.dev in mv643xx_eth_tx_timeout_task(). - Make mv643xx_eth_free_tx_descs() static. - Remove overzealous NULL check in mv643xx_eth_start_xmit(). - Use symbolic NETDEV_TX_* constants in mv643xx_eth_start_xmit(). Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Reviewed-by: NTzachi Perelstein <tzachi@marvell.com> Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
-
由 Lennert Buytenhek 提交于
mv643xx_eth_start_xmit() should check mp->tx_desc_count only inside the mp->lock spinlock. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Reviewed-by: NTzachi Perelstein <tzachi@marvell.com> Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
-
- 26 3月, 2008 1 次提交
-
-
由 Julia Lawall 提交于
Robert P.J. Day proposed to use the macro FIELD_SIZEOF in replace of code that matches its definition. The modification was made using the following semantic patch (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ type t; identifier f; @@ - (sizeof(((t*)0)->f)) + FIELD_SIZEOF(t, f) @depends on haskernel@ type t; identifier f; @@ - sizeof(((t*)0)->f) + FIELD_SIZEOF(t, f) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 05 3月, 2008 1 次提交
-
-
由 Martin Michlmayr 提交于
The mv643xx_eth driver can be loaded as a platform device, as is done by various Orion (ARM) based devices. The driver needs to define a module alias for the platform driver so udev will load it automatically. Tested with Debian on a QNAP TS-209. Signed-off-by: NMartin Michlmayr <tbm@cyrius.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 06 2月, 2008 1 次提交
-
-
由 Byron Bradley 提交于
The Marvell Orion system on chips have an integrated mv643xx MAC. On these little endian ARM devices mv643xx will oops when checksum offload is enabled. Swapping the byte order of the protocol and checksum solves this problem. Signed-off-by: NByron Bradley <byron.bbradley@gmail.com> Cc: Dale Farnsworth <dale@farnsworth.org> Cc: Manish Lachwani <mlachwani@mvista.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 24 10月, 2007 1 次提交
-
-
由 Dale Farnsworth 提交于
Commit b9f2c044 replaced mv643xx_get_stats_count() with mv643xx_get_sset_count(), but forgot to hook it up. drivers/net/mv643xx_eth.c:2678: warning: mv643xx_get_sset_count defined but not used Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
-
- 23 10月, 2007 5 次提交
-
-
由 Dale Farnsworth 提交于
We fixed checksum offload a while back. Remove the note that it doesn't work. Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
-
由 Lennert Buytenhek 提交于
Since drivers/net/mv643xx_eth.c is the only user of drivers/net/mv643xx_eth.h, there's not much use in having the header file as a separate file, so merge the header into the driver. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
-
由 Lennert Buytenhek 提交于
Now that all register address and bit defines are in private namespace (drivers/net/mv643xx_eth.h), we can safely remove the MV643XX_ETH_ prefix to conserve horizontal space. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Acked-by: NTzachi Perelstein <tzachi@marvell.com> Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
-
由 Lennert Buytenhek 提交于
Start counting mv643xx_eth register addresses from zero, instead of from 0x2000 (MV643XX_ETH_SHARED_REGS.) Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Acked-by: NTzachi Perelstein <tzachi@marvell.com> Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
-
由 Lennert Buytenhek 提交于
Allow Orion ARM platforms to use the mv643xx_eth driver. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Acked-by: NTzachi Perelstein <tzachi@marvell.com> Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
-
- 14 10月, 2007 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 10月, 2007 5 次提交
-
-
由 Jeff Garzik 提交于
These have been superceded by the new ->get_sset_count() hook. Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
This is nicer than the MAC_FMT stuff. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jeff Garzik 提交于
For the operations get-tx-csum get-sg get-tso get-ufo the default ethtool_op_xxx behavior is fine for all drivers, so we permit op==NULL to imply the default behavior. This provides a more uniform behavior across all drivers, eliminating ethtool(8) "ioctl not supported" errors on older drivers that had not been updated for the latest sub-ioctls. The ethtool_op_xxx() functions are left exported, in case anyone wishes to call them directly from a driver-private implementation -- a not-uncommon case. Should an ethtool_op_xxx() helper remain unused for a while, except by net/core/ethtool.c, we can un-export it at a later date. [ Resolved conflicts with set/get value ethtool patch... -DaveM ] Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jeff Garzik 提交于
We now have struct net_device_stats embedded in struct net_device, and the default ->get_stats() hook does the obvious thing for us. Run through drivers/net/* and remove the driver-local storage of statistics, and driver-local ->get_stats() hook where applicable. This was just the low-hanging fruit in drivers/net; plenty more drivers remain to be updated. [ Resolved conflicts with napi_struct changes and fix sunqe build regression... -DaveM ] Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis Cheng 提交于
Signed-off-by: NDenis Cheng <crquan@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-