By adding an union at media_link, we get for free a way to
represent interface->entity links.

No need to change anything at the code, just at the internal
header file.
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The media_entity_add_link() function takes an entity
as an argument just to get the list head.

Make it more generic by changing the function argument
to list_head.

No functional changes.
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The entire logic that represent graph links were developed on a
time where there were no needs to dynamic remove links. So,
although links are created/removed one by one via some
functions, they're stored as an array inside the entity struct.

As the array may grow, there's a logic inside the code that
checks if the amount of space is not enough to store
the needed links. If it isn't the core uses krealloc()
to change the size of the link, with is bad, as it
leaves the memory fragmented.

So, convert links into a list.

Also, currently,  both source and sink entities need the link
at the graph traversal logic inside media_entity. So there's
a logic duplicating all links. That makes it to spend
twice the memory needed. This is not a big deal for today's
usage, where the number of links are not big.

Yet, if during the MC workshop discussions, it was said that
IIO graphs could have up to 4,000 entities. So, we may
want to remove the duplication on some future. The problem
is that it would require a separate linked list to store
the backlinks inside the entity, or to use a more complex
algorithm to do graph backlink traversal, with is something
that the current graph traversal inside the core can't cope
with. So, let's postpone a such change if/when it is actually
needed.

It should also be noticed that the media_link structure uses
44 bytes on 32-bit architectures and 84 bytes on 64-bit
architecture. It will thus be allocated out of the 64-bytes and
96-bytes pools respectively. That's a 12.5% memory waste on
64-bit architectures and 31.25% on 32-bit architecture.
A linked list is less efficient than an array in this case, but
this could later be optimized if we can get rid of the reverse
links (with would reduce memory allocation by 50%).
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Links are graph objects that represent the links of two already
existing objects in the graph.

While with the current implementation, it is possible to create
the links earlier, It doesn't make any sense to allow linking
two objects when they are not both created.

So, remove the code that would be handling those early-created
links and add a BUG_ON() to ensure that.
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The smiapp driver creates the pads links before the media entity is
registered with the media device. This doesn't work now that object
IDs are used to create links so the media_device has to be set.

Move entity registration logic before pads links creation.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The uvc driver creates the pads links before the media entity is
registered with the media device. This doesn't work now that obj
IDs are used to create links so the media_device has to be set.

Move entities registration logic before pads links creation.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The vsp1 driver initializes the entities and creates the pads links
before the entities are registered with the media device. This doesn't
work now that object IDs are used to create links so the media_device
has to be set.

Split out the pads links creation from the entity initialization so are
made after the entities registration.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The vsp1 driver creates the pads links before the media entities are
registered with the media device. This doesn't work now that object
IDs are used to create links so the media_device has to be set.

Move entities registration logic before pads links creation.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The omap4iss driver initializes the entities and creates the pads links
before the entities are registered with the media device. This does not
work now that object IDs are used to create links so the media_device
has to be set.

Split out the pads links creation from the entity initialization so are
made after the entities registration.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The omap3isp driver parses the graph endpoints to know how many subdevices
needs to be registered async and register notifiers callbacks for to know
when these are bound and when the async registrations are completed.

Currently the entities pad are linked with the correct ISP input interface
when the subdevs are bound but it happens before entitities are registered
with the media device so that won't work now that the entity links list is
initialized on device registration.

So instead creating the pad links when the subdevice is bound, create them
on the complete callback once all the subdevices have been bound but only
try to create for the ones that have a bus configuration set during bound.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The omap3isp driver initializes the entities and creates the pads links
before the entities are registered with the media device. This does not
work now that object IDs are used to create links so the media_device
has to be set.

Split out the pads links creation from the entity initialization so the links
are created after the entities have been registered with the media device.
Suggested-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Interfaces are different than entities: they represent a
Kernel<->userspace interaction, while entities represent a
piece of hardware/firmware/software that executes a function.

Let's distinguish them by creating a separate structure to
store the interfaces.

Later patches should change the existing drivers and logic
to split the current interface embedded inside the entity
structure (device nodes) into a separate object of the graph.
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Declare the interface types that will be used by the new
G_TOPOLOGY ioctl that will be defined later on.

For now, we need those types, as they'll be used on the
internal structs associated with the new media_interface
graph object defined on the next patch.
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Now that the struct media_entity .parent field is unused, it can be
safely removed. Since all the previous users were converted to use
the .mdev field from the embedded struct media_gobj instead.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The struct media_entity has a .parent field that stores a pointer
to the parent struct media_device. But recently a media_gobj was
embedded into the entities and since struct media_gojb already has
a pointer to a struct media_device in the .mdev field, the .parent
field becomes redundant and can be removed.

This patch replaces all the usage of .parent by .graph_obj.mdev so
that field will become unused and can be removed on a later patch.

No functional changes.

The transformation was made using the following coccinelle spatch:

@@
struct media_entity *me;
@@

- me->parent
+ me->graph_obj.mdev

@@
struct media_entity *link;
@@

- link->source->entity->parent
+ link->source->entity->graph_obj.mdev

@@
struct exynos_video_entity *ve;
@@

- ve->vdev.entity.parent
+ ve->vdev.entity.graph_obj.mdev
Suggested-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

With the new API, a link can be either between two PADs or between an interface
and an entity. So, we need to use a better name for the function that create
links between two pads.

So, rename the such function to media_create_pad_link().

No functional changes.

This patch was created via this shell script:
	for i in $(find drivers/media -name '*.[ch]' -type f) $(find drivers/staging/media -name '*.[ch]' -type f) $(find include/ -name '*.h' -type f) ; do sed s,media_entity_create_link,media_create_pad_link,g <$i >a && mv a $i; done
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Tested-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

It helps to check if the media controller is doing the
right thing with the object creation and removal.

No extra code/data will be produced if DEBUG or
CONFIG_DYNAMIC_DEBUG is not enabled.
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

We can only free the media device after being sure that no
graph object is used.

In order to help tracking it, let's add debug messages
that will print when the media controller gets registered
or unregistered.
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Just like entities and pads, links also need to have unique
Object IDs along a given media controller.

So, let's add a media_gobj inside it and initialize
the object then a new link is created.
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Tested-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

PADs also need unique object IDs that won't conflict with
the entity object IDs.

The pad objects are currently created via media_entity_init()
and, once created, never change.

While this will likely change in the future in order to
support dynamic changes, for now we'll keep PADs as arrays
and initialize the media_gobj embedded structs when
registering the entity.
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Tested-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

As entities are graph objects, let's embed media_gobj
on it. That ensures an unique ID for entities that can be
global along the entire media controller.

For now, we'll keep the already existing entity ID. Such
field need to be dropped at some point, but for now, let's
not do this, to avoid needing to review all drivers and
the userspace apps.
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Tested-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Due to the MC API proposed changes, we'll need to have an unique
object ID for all graph objects, and have some shared fields
that will be common on all media graph objects.

Right now, the only common object is the object ID, but other
fields will be added later on.
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Accessing media_entity ID should now use media_entity_id() macro to
obtain the entity ID, as a next patch will remove the .id field from
struct media_entity .

So, get rid of it, otherwise the omap3isp driver will fail to build.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Accessing media_entity ID should now use media_entity_id() macro to
obtain the entity ID, as a next patch will remove the .id field from
struct media_entity .

So, get rid of it, otherwise the omap4iss driver will fail to build.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Instead of accessing directly entity.id, let's create a macro,
as this field will be moved into a common struct later on.
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This logic was broken on the original patch, likely due to a
cut-and-paste mistake.

Fix it.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This was depending on broken because we're working at the
Media Controller API, with has... issues.

As this got fixed, we can re-enable it.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Currently, media_entity_init() creates an array with the links,
allocated at init time. It provides a parameter (extra_links)
that would allocate more links than the current needs, but this
is not used by any driver.

As we want to be able to do dynamic link allocation/removal,
we'll need to change the implementation of the links. So,
before doing that, let's first remove that extra unused
parameter, in order to cleanup the interface first.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Instead of seeking for the decoder every time analog stream is
started, cache it. This simplifies the code a little bit.
Requested-by: NHans Verkuil <hverkuil@xs4all.nl>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add support for analog and dvb tv using media controller.
Signed-off-by: NRafael Lourenço de Lima Chehab <chehabrafael@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Change to define Media Controller API when CONFIG_MEDIA_CONTROLLER
is enabled. Define stubs for CONFIG_MEDIA_CONTROLLER disabled case.
This will help avoid drivers needing to enclose Media Controller
code within ifdef CONFIG_MEDIA_CONTROLLER block.
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add new media controller API to allocate media device as a
device resource. When a media device is created on the main
struct device which is the parent device for the interface
device, it will be available to all drivers associated with
that interface. For example, if a usb media device driver
creates the media device on the main struct device which is
common for all the drivers that control the media device,
including the non-media ALSA driver, media controller API
can be used to share access to the resources on the media
device. This new interface provides the above described
feature. A second interface that finds and returns the media
device is added to allow drivers to find the media device
created by any of the drivers associated with the device.
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The driver allocates the spinlock but fails to initialize it correctly.
The kernel reports a BUG indicating bad spinlock magic when spinlock
debugging is enabled.

Call spin_lock_init() on it to initialize it correctly.

Fixes: b4e3e59f ("[media] rc: add sunxi-ir driver")
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Do not remove slave TS NULL padding PID (0x1fff) by default as
there is no real need. After that whole TS is passed to kernel sw
PID filter.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

It is hard to debug possible I2C failures without knowing the
possible register itself. Add register number to error printing.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Return current active rtl2830/rtl2832 register page from the driver
cache in order to reduce I2C I/O. Register page is already cached
due to I2C write needs.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Hook up the MPEG-2 ES decoder.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

We could support start streaming with an empty output queue for the
BIT decoders due to the bitstream buffer which could still contain
data at this point, but there is really no reason for userspace to
expect this to work. Simplify the code by disallowing it.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

coda_jpeg_check_buffer only cares about the buffer length and contents,
so change the parameter type back from v4l2_vb2_buffer to just the
vb2_buffer.
Instead of just checking the first and last bytes for the SOI and EOI
markers, relax the EOI marker check a bit and allow up to 32 trailing
bytes after the EOI marker as hardware generated JPEGs sometimes contain
some alignment overhead.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>