In start_transactio(), we will try to join the transaction again after
the current transaction is committed, so we should not release the
reserved space of the qgroup. Fix it.

Cc: Arne Jansen <sensille@gmx.net>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

super.magic is an le64 but it's treated as an unterminated string when
compared against BTRFS_MAGIC which is defined as a string.  Instead
define BTRFS_MAGIC as a normal hex value and use endian helpers to
compare it to the super's magic.

I tested this by mounting an fs made before the change and made sure
that it didn't introduce sparse errors.  This matches a similar cleanup
that is pending in btrfs-progs.  David Sterba pointed out that we should
fix the kernel side as well :).
Signed-off-by: NZach Brown <zab@redhat.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

With this new ioctl(2) BTRFS_IOC_SET_FSLABEL, we can set/change the label of a mounted file system.
Signed-off-by: NJie Liu <jeff.liu@oracle.com>
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Reviewed-by: NMiao Xie <miaox@cn.fujitsu.com>
Reviewed-by: NGoffredo Baroncelli <kreijack@inwind.it>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Reviewed-by: NGoffredo Baroncelli <kreijack@inwind.it>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Add a new ioctl(2) BTRFS_IOC_GET_FSLABLE, so that we can get the label upon a mounted filesystem.
Signed-off-by: NJie Liu <jeff.liu@oracle.com>
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Cc: Miao Xie <miaox@cn.fujitsu.com>
Cc: Goffredo Baroncelli <kreijack@inwind.it>
Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Miao made the ordered operations stuff run async, which introduced a
deadlock where we could get somebody (sync) racing in and committing the
transaction while a commit was already happening.  The new committer would
try and flush ordered operations which would hang waiting for the commit to
finish because it is done asynchronously and no longer inherits the callers
trans handle.  To fix this we need to make the ordered operations list a per
transaction list.  We can get new inodes added to the ordered operation list
by truncating them and then having another process writing to them, so this
makes it so that anybody trying to add an ordered operation _must_ start a
transaction in order to add itself to the list, which will keep new inodes
from getting added to the ordered operations list after we start committing.
This should fix the deadlock and also keeps us from doing a lot more work
than we need to during commit.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Dave pointed out that xfstests 273 will tell you that it failed to load the
space cache for a block group when it remounts.  This is because we run out
of space writing out the block group cache.  This is ok and is working as it
should, but let's try to be a bit nicer.  This happens because the block
group was 100mb, but bitmap entries cover 128mb, so we were only getting
extent entries for this block group, which ended up being too many to fit in
the free space cache.  So relax the bitmap size requirements to block groups
that are at least half the size a bitmap will cover or larger, that way we
can still keep the amount of space used in the free space cache low enough
to be able to write it out.  With this patch I no longer fail to write out
the free space cache.  Thanks,
Reported-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Enhance balance usage filter by making it possible to balance out only
completely empty chunks.  Today, usage filter properly acts on values
from 1 to 99 inclusive, usage=100 selects all chunks, and usage=0
selects no chunks.  This commit changes the usage=0 case: the new
meaning is to restripe only completely empty chunks and nothing else.
Suggested-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Commit 5af3e8cc introduced a use-after-free at volumes.c:3139: bctl is freed
above in __cancel_balance() in all cases except for balance pause.  Fix this
by moving the offending check a couple statements above, the meaning of the
check is preserved.
Reported-by: NChris Mason <chris.mason@fusionio.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Nobody uses these io tree ops anymore so just remove them and clean up the code
a bit.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

The defrag operation can take very long, we want to have a way how to
cancel it. The code checks for a pending signal at safe points in the
defrag loops and returns EAGAIN. This means a user can press ^C after
running 'btrfs fi defrag', woks for both defrag modes, files and root.

Returning from the command was instant in my light tests, but may take
longer depending on the aging factor of the filesystem.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

The warning in use_block_rsv is not useful for users and may fill
the logs unnecessarily.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

This idea is from ext4. By this patch, we can make the dio write parallel,
and improve the performance. But because we can not update isize without
i_mutex, the unlocked dio write just can be done in front of the EOF.

We needn't worry about the race between dio write and truncate, because the
truncate need wait untill all the dio write end.

And we also needn't worry about the race between dio write and punch hole,
because we have extent lock to protect our operation.

I ran fio to test the performance of this feature.

== Hardware ==
CPU: Intel(R) Core(TM)2 Duo CPU     E7500  @ 2.93GHz
Mem: 2GB
SSD: Intel X25-M 120GB (Test Partition: 60GB)

== config file ==
[global]
ioengine=psync
direct=1
bs=4k
size=32G
runtime=60
directory=/mnt/btrfs/
filename=testfile
group_reporting
thread

[file1]
numjobs=1 # 2 4
rw=randwrite

== result (KBps) ==
write	1	2	4
lock	24936	24738	24726
nolock	24962	30866	32101

== result (iops) ==
write	1	2	4
lock	6234	6184	6181
nolock	6240	7716	8025
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Currently, we can do unlocked dio reads, but the following race
is possible:

dio_read_task			truncate_task
				->btrfs_setattr()
->btrfs_direct_IO
    ->__blockdev_direct_IO
      ->btrfs_get_block
				  ->btrfs_truncate()
				 #alloc truncated blocks
				 #to other inode
      ->submit_io()
     #INFORMATION LEAK

In order to avoid this problem, we must serialize unlocked dio reads with
truncate. There are two approaches:
- use extent lock to protect the extent that we truncate
- use inode_dio_wait() to make sure the truncating task will wait for
  the read DIO.

If we use the 1st one, we will meet the endless truncation problem due to
the nonlocked read DIO after we implement the nonlocked write DIO. It is
because we still need invoke inode_dio_wait() avoid the race between write
DIO and truncation. By that time, we have to introduce

  btrfs_inode_{block, resume}_nolock_dio()

again. That is we have to implement this patch again, so I choose the 2nd
way to fix the problem.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

The deadlock problem happened when running fsstress(a test program in LTP).

Steps to reproduce:
 # mkfs.btrfs -b 100M <partition>
 # mount <partition> <mnt>
 # <Path>/fsstress -p 3 -n 10000000 -d <mnt>

The reason is:
btrfs_direct_IO()
 |->do_direct_IO()
     |->get_page()
     |->get_blocks()
     |	 |->btrfs_delalloc_resereve_space()
     |	 |->btrfs_add_ordered_extent() -------	Add a new ordered extent
     |->dio_send_cur_page(page0) --------------	We didn't submit bio here
     |->get_page()
     |->get_blocks()
	 |->btrfs_delalloc_resereve_space()
	     |->flush_space()
		 |->btrfs_start_ordered_extent()
		     |->wait_event() ----------	Wait the completion of
						the ordered extent that is
						mentioned above

But because we didn't submit the bio that is mentioned above, the ordered
extent can not complete, we would wait for its completion forever.

There are two methods which can fix this deadlock problem:
1. submit the bio before we invoke get_blocks()
2. reserve the space before we do dio

Though the 1st is the simplest way, we need modify the code of VFS, and it
is likely to break contiguous requests, and introduce performance regression
for the other filesystems.

So we have to choose the 2nd way.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Cc: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

I noticed we were getting lots of warnings with xfstest 83 because we have
reservations outstanding.  This is because we moved the orphan add outside
of the truncate, but we don't actually cleanup our reservation if something
fails.  This fixes the problem and I no longer see warnings.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Sometimes xfstest 83 will fail to remount the scratch device because we've
gotten ourselves so full that we cannot cleanup the orphan items.  In this
case check to see if we're doing the orphan cleanup and if we are allow us
to steal our reservation from the global block rsv.  With this patch I've
not been able to reproduce the failed mount problem.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

The argument "inherit" of btrfs_ioctl_snap_create_transid() was assigned
to NULL during we created the snapshots, so we didn't free it though we
called kfree() in the caller.

But since we are sure the snapshot creation is done after the function -
btrfs_ioctl_snap_create_transid() - completes, it is safe that we don't
assign the pointer "inherit" to NULL, and just free it in the caller of
btrfs_ioctl_snap_create_transid(). In this way, the code can become more
readable.
Reported-by: NAlex Lyakas <alex.btrfs@zadarastorage.com>
Cc: Arne Jansen <sensille@gmx.net>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

open_ctree() need read the metadata to initialize the global information
of btrfs. But it may fail after it submit some bio, and then it will jump
to the error path. Unfortunately, it doesn't check if there are some bios
in flight, and just stop all the worker threads. As a result, when the
submitted bios end, they can not find any worker thread which can deal with
subsequent work, then oops happen.

kernel BUG at fs/btrfs/async-thread.c:605!

Fix this problem by invoking invalidate_inode_pages2() before we stop the
worker threads. This function will wait until the bio end because it need
lock the pages which are going to be invalidated, and if a page is under
disk read IO, it must be locked. invalidate_inode_pages2() need wait until
end bio handler to unlocked it.
Reported-and-Tested-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

This patch adds the flag, BTRFS_SEND_FLAG_NO_FILE_DATA to the btrfs send
ioctl code. When this flag is set, the btrfs send code will never write file
data into the stream (thus also avoiding expensive reads of that data in the
first place). BTRFS_SEND_C_UPDATE_EXTENT commands will be sent (instead of
BTRFS_SEND_C_WRITE) with an offset, length pair indicating the extent in
question.

This patch does not affect the operation of BTRFS_SEND_C_CLONE commands -
they will continue to be sent when a search finds an appropriate extent to
clone from.
Signed-off-by: NMark Fasheh <mfasheh@suse.de>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

For write, we also reserve some space for COW blocks during updating
the checksum tree, and we calculate the number of blocks by checking
if the number of bytes outstanding that are going to need csums needs
one more block for csum.

When we add these checksum into the checksum tree, we use ordered sums
list.
Every ordered sum contains csums for each sector, and we'll first try
to look up an existing csum item,
a) if we don't yet have a proper csum item, then we need to insert one,
b) or if we find one but the csum item is not big enough, then we need
to extend it.

The point is we'll unlock the whole path and then insert or extend.
So others can hack in and update the tree.

Each insert or extend needs update the tree with COW on, and we may need
to insert/extend for many times.

That means what we've reserved for updating checksum tree is NOT enough
indeed.

The case is even more serious with having several write threads at the
same time, it can end up eating our reserved space quickly and starting
eating globle reserve pool instead.

I don't yet come up with a way to calculate the worse case for updating
csum, but extending the checksum item as much as possible can be helpful
in my test.

The idea behind is that it can reduce the times we insert/extend so that
it saves us precious reserved space.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

The entry point at the defrag ioctl always sets "cache only" to 0;
the codepaths haven't run for a long time as far as I can
tell.  Chris says they're dead code, so remove them.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

I hit a deadlock where transaction commit was waiting on num_writers to be
0.  This happened because somebody came into btrfs_commit_transaction and
noticed we had aborted and it went to cleanup_transaction.  This shouldn't
happen because cleanup_transaction is really to fixup a bad commit, it
doesn't do the normal trans handle cleanup things.  So if we have an error
just do the normal btrfs_end_transaction dance and return.  Once we are in
the actual commit path we can use cleanup_transaction and be good to go.
Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

I noticed we would deadlock if we aborted a transaction while doing
compressed io.  This is because we don't unlock our pages if something goes
horribly wrong.  To fix this we need to make sure that we call
extent_clear_unlock_delalloc in order to unlock all the pages.  If we have
to cow in the async submission thread we need to make sure to unlock our
locked_page as the cow error path will not unlock the locked page as it
depends on the caller to unlock that page.  With this patch we no longer
deadlock on the page lock when we have an aborted transaction.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

People have been complaining about random ENOSPC errors that will clear up
after a umount or just a given amount of time.  Chris was able to reproduce
this with stress.sh and lots of processes and so was I.  Basically the
overcommit stuff would really let us get out of hand, in my tests I saw up
to 30 gigs of outstanding reservations with only 2 gigs total of metadata
space.  This usually worked out fine but with so much outstanding
reservation the flushing stuff short circuits to make sure we don't hang
forever flushing when we really need ENOSPC.  Plus we allocate chunks in
order to alleviate the pressure, but this doesn't actually help us since we
only use the non-allocated area in our over commit logic.

So instead of basing overcommit on the amount of non-allocated space,
instead just do it based on how much total space we have, and then limit it
to the non-allocated space in case we are short on space to spill over into.
This allows us to have the same performance as well as no longer giving
random ENOSPC.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Dave sent me a panic where we were doing the orphan cleanup and panic'ed
trying to release our reservation from the orphan block rsv.  The reason for
this is because our orphan block rsv had been free'd out from underneath us
because the transaction commit found that there were no orphan inodes
according to its count and decided to free it.  This is incorrect so make
sure we inc the orphan inodes count so the accounting is all done properly.
This would also cause the warning in the orphan commit code normally if you
had any orphans to cleanup as they would only decrement the orphan count so
you'd get a negative orphan count which could cause problems during runtime.
Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

When a transaction aborts or there's an EIO on an ordered extent or any
error really we will not free up the space we reserved for this ordered
extent.  This results in warnings from the block group cache cleanup in the
case of a transaction abort, or leaking space in the case of EIO on an
ordered extent.  Fix this up by free'ing the reserved space if we have an
error at all trying to complete an ordered extent.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

When we abort we've been just free'ing up all the ordered extents and
hoping for the best.  This results in lots of warnings from various places,
warnings from btrfs_destroy_inode() because it's ENOSPC accounting isn't
fixed.  It will also screw up lots of pages who have been set private but
never get cleared because the ordered extents are never allowed to be
submitted.  This patch fixes those warnings.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

I hit this error when reproducing a bug that would end in a transaction
abort.  We take the delayed ref head's mutex to keep anybody from processing
it while we're destroying it, but we fail to drop the mutex before we carry
on and free the damned thing.  Fix this by doing the remove logic for the
head ourselves and unlock the mutex, that way we can avoid use after free's
or hung tasks waiting on that mutex to come back so they know the delayed
ref completed.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

WARN_ON isn't enough, we need to stop the loop if for any reason
we would overrun the devices_info array.

I tried to track down the connection between the length of
the alloc_devices list and the rw_devices counter but
it wasn't immediately obvious, so be defensive about it.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

No point in DEFINE_WAIT(wait) if it's not used!
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

"item" was set but never used in this function.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

__btrfs_std_error didn't always properly call va_end,
and might call va_start even if fmt was NULL.

Move all the varargs handling into the block where we
have fmt.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

I don't think that BTRFS_DEV_EXTENT_KEY is supposed
to fall through to BTRFS_DEV_STATS_KEY ...
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

This keeps static checkers happy.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

At least backref_tree_panic() can apparently pass
in a null fs_info, so handle that in __btrfs_panic
to get the message out on the console.

The btrfs_panic macro also uses fs_info, but that's
largely pointless; it's testing to see if
BTRFS_MOUNT_PANIC_ON_FATAL_ERROR is not set.
But if it *were* set, __btrfs_panic() would have,
well, paniced and we wouldn't be here, testing it!
So just BUG() at this point.

And since we only use fs_info once now, just use it
directly.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

No need to test the result, we can't get a
null pointer from list_entry()
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

All we do is set it to NULL and test it :)
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Because of how little we allocate chunks now we can get really tight on
metadata space before we will allocate a new chunk.  This resulted in being
unable to add device extents when allocating a new metadata chunk as we did
not have enough space.  This is because we were allowed to overcommit too
much metadata without actually making sure we had enough space to make
allocations.  The idea behind overcommit is that we are allowed to say "sure
you can have that reservation" when most of the free space is occupied by
reservations, not actual allocations.  But in this case where a majority of
the total space is in use by actual allocations we can screw ourselves by
not being able to make real allocations when it matters.  So make sure we
have enough real space for our global reserve, and if not then don't allow
overcommitting.  Thanks,
Reported-and-tested-by: NJim Schutt <jaschut@sandia.gov>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

I got a double free error when unmounting a file system that failed to add a
chunk during its operation.  This is because we will kfree the mapping that
we created but leave the extent_map in the em_tree for chunks.  So to fix
this just remove the extent_map when we error out so we don't run into this
problem.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>