- 16 12月, 2018 13 次提交
-
-
由 David Ahern 提交于
Move arp_queue_len_bytes ahead of arp_queue to remove two 4-byte holes. Ensure ha element is always 8-byte aligned. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tonghao Zhang 提交于
Except for returning, the var leaf is not used in the qdisc_leaf(). For simplicity, remove it. Signed-off-by: NTonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
A recent commit allows sockets bound to a VRF to receive ipv6 link local packets. However, it only works for UDP and worse TCP connection attempts to the LLA with the only listener bound to the VRF just hang where as before the client gets a reset and connection refused. Fix by adjusting ir_iif for LL addresses and packets received through a device enslaved to a VRF. Fixes: 6f12fa77 ("vrf: mark skb for multicast or link-local as enslaved to VRF") Reported-by: NDonald Sharp <sharpd@cumulusnetworks.com> Cc: Mike Manning <mmanning@vyatta.att-mail.com> Signed-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Heiner Kallweit 提交于
Improve detection of spurious interrupts by checking against the interrupt mask as currently set in the chip. Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yangtao Li 提交于
We already have the DEFINE_SHOW_ATTRIBUTE. There is no need to define such a macro, so remove DEFINE_SIMPLE_DEBUGFS_FILE. Also use the DEFINE_SHOW_ATTRIBUTE macro to simplify some code. Signed-off-by: NYangtao Li <tiny.windzz@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yangtao Li 提交于
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: NYangtao Li <tiny.windzz@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Salil Mehta says: ==================== net: hns3: Add more commands to Debugfs in HNS3 driver This patch-set adds few more debugfs commands to HNS3 Ethernet Driver. Support has been added to query info related to below items: 1. Packet buffer descriptor ("echo bd info [queue no] [bd index] > cmd") 2. Manager table("echo dump mng tbl > cmd") 3. Dfx status register("echo dump reg ssu [prt id] > cmd") 4. Dcb status register("echo dump reg dcb [port id] > cmd") 5. Queue map ("echo queue map [queue no] > cmd") 6. Tm map ("echo tm map [queue no] > cmd") NOTE: Above commands are *read-only* and are only intended to query the information from the SoC(and dump inside the kernel, for now) and in no way tries to perform write operations for the purpose of configuration etc. Change Log: V1-->V2: 1. Addressed the GCC-8.2 compiler issue reported by David S. Miller. Link: https://lkml.org/lkml/2018/12/14/1298 ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 liuzhongzhu 提交于
This patch prints dcb register status information by module. debugfs command: root@(none)# echo dump tm map 100 > cmd queue_id | qset_id | pri_id | tc_id 0100 | 0065 | 08 | 00 root@(none)# Signed-off-by: Nliuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 liuzhongzhu 提交于
This patch prints queue map information. debugfs command: echo dump queue map > cmd Sample Command: root@(none)# echo queue map > cmd local queue id | global queue id | vector id 0 32 769 1 33 770 2 34 771 3 35 772 4 36 773 5 37 774 6 38 775 7 39 776 8 40 777 9 41 778 10 42 779 11 43 780 12 44 781 13 45 782 14 46 783 15 47 784 root@(none)# Signed-off-by: Nliuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 liuzhongzhu 提交于
This patch prints dcb register status information by module. debugfs command: root@(none)# echo dump reg dcb > cmd roce_qset_mask: 0x0 nic_qs_mask: 0x0 qs_shaping_pass: 0x0 qs_bp_sts: 0x0 pri_mask: 0x0 pri_cshaping_pass: 0x0 pri_pshaping_pass: 0x0 root@(none)# Signed-off-by: Nliuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 liuzhongzhu 提交于
This patch prints status register information by module. debugfs command: echo dump reg [mode name] > cmd Sample Command: root@(none)# echo dump reg bios common > cmd BP_CPU_STATE: 0x0 DFX_MSIX_INFO_NIC_0: 0xc000 DFX_MSIX_INFO_NIC_1: 0xf DFX_MSIX_INFO_NIC_2: 0x2 DFX_MSIX_INFO_NIC_3: 0x2 DFX_MSIX_INFO_ROC_0: 0xc000 DFX_MSIX_INFO_ROC_1: 0x0 DFX_MSIX_INFO_ROC_2: 0x0 DFX_MSIX_INFO_ROC_3: 0x0 root@(none)# Signed-off-by: Nliuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 liuzhongzhu 提交于
This patch prints manager table information. debugfs command: echo dump mng tbl > cmd Sample Command: root@(none)# echo dump mng tbl > cmd entry|mac_addr |mask|ether|mask|vlan|mask|i_map|i_dir|e_type 00 |01:00:5e:00:00:01|0 |00000|0 |0000|0 |00 |00 |0 01 |c2:f1:c5:82:68:17|0 |00000|0 |0000|0 |00 |00 |0 root@(none)# Signed-off-by: Nliuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 liuzhongzhu 提交于
This patch prints Sending and receiving package descriptor information. debugfs command: echo dump bd info 1 > cmd Sample Command: root@(none)# echo bd info 1 > cmd hns3 0000:7d:00.0: TX Queue Num: 0, BD Index: 0 hns3 0000:7d:00.0: (TX) addr: 0x0 hns3 0000:7d:00.0: (TX)vlan_tag: 0 hns3 0000:7d:00.0: (TX)send_size: 0 hns3 0000:7d:00.0: (TX)vlan_tso: 0 hns3 0000:7d:00.0: (TX)l2_len: 0 hns3 0000:7d:00.0: (TX)l3_len: 0 hns3 0000:7d:00.0: (TX)l4_len: 0 hns3 0000:7d:00.0: (TX)vlan_tag: 0 hns3 0000:7d:00.0: (TX)tv: 0 hns3 0000:7d:00.0: (TX)vlan_msec: 0 hns3 0000:7d:00.0: (TX)ol2_len: 0 hns3 0000:7d:00.0: (TX)ol3_len: 0 hns3 0000:7d:00.0: (TX)ol4_len: 0 hns3 0000:7d:00.0: (TX)paylen: 0 hns3 0000:7d:00.0: (TX)vld_ra_ri: 0 hns3 0000:7d:00.0: (TX)mss: 0 hns3 0000:7d:00.0: RX Queue Num: 0, BD Index: 120 hns3 0000:7d:00.0: (RX)addr: 0xffee7000 hns3 0000:7d:00.0: (RX)pkt_len: 0 hns3 0000:7d:00.0: (RX)size: 0 hns3 0000:7d:00.0: (RX)rss_hash: 0 hns3 0000:7d:00.0: (RX)fd_id: 0 hns3 0000:7d:00.0: (RX)vlan_tag: 0 hns3 0000:7d:00.0: (RX)o_dm_vlan_id_fb: 0 hns3 0000:7d:00.0: (RX)ot_vlan_tag: 0 hns3 0000:7d:00.0: (RX)bd_base_info: 0 Signed-off-by: Nliuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 12月, 2018 18 次提交
-
-
由 David S. Miller 提交于
Peter Oskolkov says: ==================== net: prefer listeners bound to an address A relatively common use case is to have several IPs configured on a host, and have different listeners for each of them. We would like to add a "catch all" listener on addr_any, to match incoming connections not served by any of the listeners bound to a specific address. However, port-only lookups can match addr_any sockets when sockets listening on specific addresses are present if so_reuseport flag is set. This patchset eliminates lookups into port-only hashtable, as lookups by (addr,port) tuple are easily available. In a future patchset I plan to explore whether it is possible to remove port-only hashtables completely: additional refactoring will be required, as some non-lookup code uses the hashtables. ==================== Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Oskolkov 提交于
This patch adds a selftest that verifies that a socket listening on a specific address is chosen in preference over sockets that listen on any address. The test covers UDP/UDP6/TCP/TCP6. It is based on, and similar to, reuseport_dualstack.c selftest. Signed-off-by: NPeter Oskolkov <posk@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Oskolkov 提交于
A relatively common use case is to have several IPs configured on a host, and have different listeners for each of them. We would like to add a "catch all" listener on addr_any, to match incoming connections not served by any of the listeners bound to a specific address. However, port-only lookups can match addr_any sockets when sockets listening on specific addresses are present if so_reuseport flag is set. This patch eliminates lookups into port-only hashtable, as lookups by (addr,port) tuple are easily available. In addition, compute_score() is tweaked to _not_ match addr_any sockets to specific addresses, as hash collisions could result in the unwanted behavior described above. Tested: the patch compiles; full test in the last patch in this patchset. Existing reuseport_* selftests also pass. Suggested-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NPeter Oskolkov <posk@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Oskolkov 提交于
A relatively common use case is to have several IPs configured on a host, and have different listeners for each of them. We would like to add a "catch all" listener on addr_any, to match incoming connections not served by any of the listeners bound to a specific address. However, port-only lookups can match addr_any sockets when sockets listening on specific addresses are present if so_reuseport flag is set. This patch eliminates lookups into port-only hashtable, as lookups by (addr,port) tuple are easily available. In addition, compute_score() is tweaked to _not_ match addr_any sockets to specific addresses, as hash collisions could result in the unwanted behavior described above. Tested: the patch compiles; full test in the last patch in this patchset. Existing reuseport_* selftests also pass. Suggested-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NPeter Oskolkov <posk@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Oskolkov 提交于
A relatively common use case is to have several IPs configured on a host, and have different listeners for each of them. We would like to add a "catch all" listener on addr_any, to match incoming connections not served by any of the listeners bound to a specific address. However, port-only lookups can match addr_any sockets when sockets listening on specific addresses are present if so_reuseport flag is set. This patch eliminates lookups into port-only hashtable, as lookups by (addr,port) tuple are easily available. In addition, compute_score() is tweaked to _not_ match addr_any sockets to specific addresses, as hash collisions could result in the unwanted behavior described above. Tested: the patch compiles; full test in the last patch in this patchset. Existing reuseport_* selftests also pass. Suggested-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NPeter Oskolkov <posk@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Oskolkov 提交于
A relatively common use case is to have several IPs configured on a host, and have different listeners for each of them. We would like to add a "catch all" listener on addr_any, to match incoming connections not served by any of the listeners bound to a specific address. However, port-only lookups can match addr_any sockets when sockets listening on specific addresses are present if so_reuseport flag is set. This patch eliminates lookups into port-only hashtable, as lookups by (addr,port) tuple are easily available. In addition, compute_score() is tweaked to _not_ match addr_any sockets to specific addresses, as hash collisions could result in the unwanted behavior described above. Tested: the patch compiles; full test in the last patch in this patchset. Existing reuseport_* selftests also pass. Suggested-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NPeter Oskolkov <posk@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 yupeng 提交于
Add explainations for some general IP counters, SACK and DSACK related counters Signed-off-by: Nyupeng <yupeng0921@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
David Ahern says: ==================== neighbor: More gc_list changes More gc_list changes and cleanups. The first 2 patches are bug fixes from the first gc_list change. Specifically, fix the locking order to be consistent - table lock followed by neighbor lock, and then entries in the FAILED state should always be candidates for forced_gc without waiting for any time span (return to the eviction logic prior to the separate gc_list). Patch 3 removes 2 now unnecessary arguments to neigh_del. Patch 4 moves a helper from a header file to core code in preparation for Patch 5 which removes NTF_EXT_LEARNED entries from the gc_list. These entries are already exempt from forced_gc; patch 5 removes them from consideration and makes them on par with PERMANENT entries given that they are also managed by userspace. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Externally learned entries are similar to PERMANENT entries in the sense they are managed by userspace and can not be garbage collected. As such remove them from the gc_list, remove the flags check from neigh_forced_gc and skip threshold checks in neigh_alloc. As with PERMANENT entries, this allows unlimited number of NTF_EXT_LEARNED entries. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
neigh_update_ext_learned has one caller in neighbour.c so does not need to be defined in the header. Move it and in the process remove the intialization of ndm_flags and just set it based on the flags check. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
neigh_del now only has 1 caller, and the state and flags arguments are both 0. Remove them and simplify neigh_del. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
PERMANENT entries are not on the gc_list so the state check is now redundant. Also, the move to not purge entries until after 5 seconds should not apply to FAILED entries; those can be removed immediately to make way for newer ones. This restores the previous logic prior to the gc_list. Fixes: 58956317 ("neighbor: Improve garbage collection") Signed-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Lock checker noted an inverted lock order between neigh_change_state (neighbor lock then table lock) and neigh_periodic_work (table lock and then neighbor lock) resulting in: [ 121.057652] ====================================================== [ 121.058740] WARNING: possible circular locking dependency detected [ 121.059861] 4.20.0-rc6+ #43 Not tainted [ 121.060546] ------------------------------------------------------ [ 121.061630] kworker/0:2/65 is trying to acquire lock: [ 121.062519] (____ptrval____) (&n->lock){++--}, at: neigh_periodic_work+0x237/0x324 [ 121.063894] [ 121.063894] but task is already holding lock: [ 121.064920] (____ptrval____) (&tbl->lock){+.-.}, at: neigh_periodic_work+0x194/0x324 [ 121.066274] [ 121.066274] which lock already depends on the new lock. [ 121.066274] [ 121.067693] [ 121.067693] the existing dependency chain (in reverse order) is: ... Fix by renaming neigh_change_state to neigh_update_gc_list, changing it to only manage whether an entry should be on the gc_list and taking locks in the same order as neigh_periodic_work. Invoke at the end of neigh_update only if diff between old or new states has the PERMANENT flag set. Fixes: 8cc196d6 ("neighbor: gc_list changes should be protected by table lock") Signed-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cong Wang 提交于
After commit 69bd4840 ("net/sched: Remove egdev mechanism"), tc_setup_cb_call() is nearly identical to tcf_block_cb_call(), so we can just fold tcf_block_cb_call() into tc_setup_cb_call() and remove its unused parameter 'exts'. Fixes: 69bd4840 ("net/sched: Remove egdev mechanism") Cc: Oz Shlomo <ozsh@mellanox.com> Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NOz Shlomo <ozsh@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wen Yang 提交于
The driver was checking for non-NULL address. - adapter->napi[i] This is pointless as these will be always non-NULL, since the 'dapter->napi' is allocated in init_napi(). It is safe to get rid of useless checks for addresses to fix the coccinelle warning: >>drivers/net/ethernet/ibm/ibmvnic.c: test of a variable/field address Since such statements always return true, they are redundant. Signed-off-by: NWen Yang <wen.yang99@zte.com.cn> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> CC: Michael Ellerman <mpe@ellerman.id.au> CC: Thomas Falcon <tlfalcon@linux.ibm.com> CC: John Allen <jallen@linux.ibm.com> CC: "David S. Miller" <davem@davemloft.net> CC: linuxppc-dev@lists.ozlabs.org CC: netdev@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Prashant Bhole 提交于
tun_xdp_one() runs with local bh disabled. So there is no need to disable preemption by calling get_cpu_ptr while updating stats. This patch replaces the use of get_cpu_ptr() with this_cpu_ptr() as a micro-optimization. Also removes related put_cpu_ptr call. Acked-by: NJason Wang <jasowang@redhat.com> Signed-off-by: NPrashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
ppp and hamradio have copies of the same code that uses a semaphore in place of a completion for historic reasons. Make it use the proper interface instead in all copies. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
We now get a link failure when CONFIG_INET is disabled, since tcp_gro_complete is unavailable: drivers/net/ethernet/hisilicon/hns3/hns3_enet.o: In function `hns3_set_gro_param': hns3_enet.c:(.text+0x230c): undefined reference to `tcp_gro_complete' Add an explicit CONFIG_INET dependency here to avoid the broken configuration. Fixes: a6d53b97 ("net: hns3: Adds GRO params to SKB for the stack") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 12月, 2018 9 次提交
-
-
由 David S. Miller 提交于
Petr Machata says: ==================== Introduce NETDEV_PRE_CHANGEADDR Spectrum devices have a limitation that all router interfaces need to have the same address prefix. In Spectrum-1, the requirement is for the initial 38 bits of all RIFs to be the same, in Spectrum-2 the limit is 36 bits. Currently violations of this requirement are not diagnosed. At the same time, if the condition is not upheld, the mismatched MAC address ends up overwriting the common prefix, and all RIF MAC addresses silently change to the new prefix. It is therefore desirable to be able at least to diagnose the issue, and better to reject attempts to change MAC addresses in ways that is incompatible with the device. Currently MAC address changes are notified through emission of NETDEV_CHANGEADDR, which is done after the change. Extending this message to allow vetoing is certainly possible, but several other notification types have instead adopted a simple two-stage approach: first a "pre" notification is sent to make sure all interested parties are OK with the change that's about to be done. Then the change is done, and afterwards a "post" notification is sent. This dual approach is easier to use: when the change is vetoed, nothing has changed yet, and it's therefore unnecessary to roll anything back. Therefore this patchset introduces it for NETDEV_CHANGEADDR as well. One prominent path to emitting NETDEV_CHANGEADDR is through dev_set_mac_address(). Therefore in patch #1, give this function an extack argument, so that a textual reason for rejection (or a warning) can be communicated back to the user. In patch #2, add the new notification type. In patch #3, have dev.c emit the notification for instances of dev_addr change, or addition of an address to dev_addrs list. In patches #4 and #5, extend the bridge driver to handle and emit the new notifier. In patch #6, change IPVLAN to emit the new notifier. Likewise for bonding driver in patches #7 and #8. Note that the team driver doesn't need this treatment, as it goes through dev_set_mac_address(). In patches #9, #10 and #11 adapt mlxsw to veto MAC addresses on router interfaces, if they violate the requirement that all RIF MAC addresses have the same prefix. Finally in patches #12 and #13, add a test for vetoing of a direct change of a port device MAC, and indirect change of a bridge MAC. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petr Machata 提交于
When a FID RIF is created for a bridge with IP address, its MAC address must obey the same requirements as other RIFs. Test that attempts to change the address incompatibly by attaching a device are vetoed with extack. Signed-off-by: NPetr Machata <petrm@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petr Machata 提交于
Test that attempts to change address in a way that violates Spectrum requirements are vetoed with extack. Signed-off-by: NPetr Machata <petrm@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petr Machata 提交于
On NETDEV_PRE_CHANGEADDR, if the change is related to a RIF interface, verify that it satisfies the criterion that all RIF interfaces have the same MAC address prefix, as indicated by mlxsw_sp.mac_mask. Additionally, besides explicit address changes, check that the address of an interface for which a RIF is about to be added matches the required pattern as well. Signed-off-by: NPetr Machata <petrm@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petr Machata 提交于
The Spectrum hardware demands that all router interfaces in the system have the same first 38 resp. 36 bits of MAC address: the former limit holds on Spectrum, the latter on Spectrum-2. Add a field that refers to the required prefix mask and initialize in mlxsw_sp1_init() and mlxsw_sp2_init(). Signed-off-by: NPetr Machata <petrm@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petr Machata 提交于
Prepare mlxsw_sp_netdevice_router_port_event() for handling of NETDEV_PRE_CHANGEADDR. Split out the part that deals with the actual changes and call it for the two events currently handled. Signed-off-by: NPetr Machata <petrm@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petr Machata 提交于
Give interested parties an opportunity to veto an impending HW address change. Signed-off-by: NPetr Machata <petrm@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petr Machata 提交于
Before NETDEV_CHANGEADDR, bond driver should emit NETDEV_PRE_CHANGEADDR, and allow consumers to veto the address change. To propagate further the return code from NETDEV_PRE_CHANGEADDR, give the function that implements address change a return value. Signed-off-by: NPetr Machata <petrm@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petr Machata 提交于
A NETDEV_CHANGEADDR event implies a change of address of each of the IPVLANs of this IPVLAN device. Therefore propagate NETDEV_PRE_CHANGEADDR to all the IPVLANs. Signed-off-by: NPetr Machata <petrm@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-