sysfs: use size_t length modifier in pr_debug format arguments
Signed-off-by: NZach Brown <zach.brown@oracle.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

configfs: use size_t length modifier in pr_debug format argument
Signed-off-by: NZach Brown <zach.brown@oracle.com>
Acked-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

aio: use size_t length modifier in pr_debug format arguments
Signed-off-by: NZach Brown <zach.brown@oracle.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

While reviewing the 'may be used uninitialized' bogus gcc warnings, I
noticed that an error code assignment was only needed if an error had
actually occured.
Signed-off-by: NJeff Garzik <jeff@garzik.org>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

These patches make the kernel pass 64-bit inode numbers internally when
communicating to userspace, even on a 32-bit system.  They are required
because some filesystems have intrinsic 64-bit inode numbers: NFS3+ and XFS
for example.  The 64-bit inode numbers are then propagated to userspace
automatically where the arch supports it.

Problems have been seen with userspace (eg: ld.so) using the 64-bit inode
number returned by stat64() or getdents64() to differentiate files, and
failing because the 64-bit inode number space was compressed to 32-bits, and
so overlaps occur.

This patch:

Make filldir_t take a 64-bit inode number and struct kstat carry a 64-bit
inode number so that 64-bit inode numbers can be passed back to userspace.

The stat functions then returns the full 64-bit inode number where
available and where possible.  If it is not possible to represent the inode
number supplied by the filesystem in the field provided by userspace, then
error EOVERFLOW will be issued.

Similarly, the getdents/readdir functions now pass the full 64-bit inode
number to userspace where possible, returning EOVERFLOW instead when a
directory entry is encountered that can't be properly represented.

Note that this means that some inodes will not be stat'able on a 32-bit
system with old libraries where they were before - but it does mean that
there will be no ambiguity over what a 32-bit inode number refers to.

Note similarly that directory scans may be cut short with an error on a
32-bit system with old libraries where the scan would work before for the
same reasons.

It is judged unlikely that this situation will occur because modern glibc
uses 64-bit capable versions of stat and getdents class functions
exclusively, and that older systems are unlikely to encounter
unrepresentable inode numbers anyway.

[akpm: alpha build fix]
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Revert Andrew Morton's patch to temporarily hack around the lack of a
declaration of sigset_t in linux/compat.h to make the block-disablement
patches build on IA64.  This got accidentally pushed to Linus and should
be fixed in a different manner.

Also make linux/compat.h #include asm/signal.h to gain a definition of
sigset_t so that it can externally declare sigset_from_compat().

This has been compile-tested for i386, x86_64, ia64, mips, mips64, frv, ppc and
ppc64 and run-tested on frv.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

proc_pid_make_inode:

	ei->pid = get_pid(task_pid(task));

I think this is not safe.  get_pid() can be preempted after checking "pid
!= NULL".  Then the task exits, does detach_pid(), and RCU frees the pid.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It was pointed out that since I am taking ARRAY_SIZE anyway the trailing empty
entry is silly and just wastes space.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The value doesn't change but this ensures I will have the proper value when
other files are added to proc_base_stuff.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

task_state() needs tasklist_lock to protect ->parent/->real_parent.  However
task->parent points to nowhere only when the actions below happen in order

	1) release_task(task)
	2) release_task(task->parent)
	3) a grace period passed

But 3) implies that the memory ops from 1) should be finished, so pid_alive()
can't be true in such a case.

Otherwise, we don't care if ->parent/->real_parent changes under us.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Drop tasklist_lock. ->siglock protects almost all interesting data
(including sub-threads traversal) except:

	->signal->tty
		protected by tty_mutex

	->real_parent
		the task can't be unhashed while we are holding
		->siglock, so ->real_parent can change from under us
		but we can safely dereference it under rcu_read_lock()

	->pgrp/->session
		we can get inconsistent numbers if the task does
		sys_setsid/daemonize at the same time. I hope this
		is acceptable.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

lock_task_sighand() can take ->siglock without holding tasklist_lock.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The implementation is exactly the same and there is currently nothing to
distinguish proc_tid_attr, and proc_tgid_attr.  So it is pointless to have two
separate implementations.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The hard coded inode numbers in proc currently limit its maintainability,
its flexibility, and what can be done with the rest of system.  /proc limits
pid-max to 32768 on 32 bit systems it limits fd-max to 32768 on all systems,
and placing the pid in the inode number really gets in the way of implementing
subdirectories of per process information.

Ever since people started adding to the middle of the file type enumeration we
haven't been maintaing the historical inode numbers, all we have really
succeeded in doing is keeping the pid in the proc inode number.  The pid is
already available in the directory name so no information is lost removing it
from the inode number.

So if something in user space cares if we remove the inode number from the
/proc inode it is almost certainly broken.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

To remove the hard coded proc inode numbers it is necessary to be able to
create the proc inodes during readdir.  The instantiate methods are the subset
of lookup that is needed to accomplish that.

This first step just splits the lookup methods into 2 functions.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch generalizes the concept of files in /proc that are related to
processes but live in the root directory of /proc

Ideally this would reuse infrastructure from the rest of the process specific
parts of proc but unfortunately security_task_to_inode must not be called on
files that are not strictly per process.  security_task_to_inode really needs
to be reexamined as the security label can change in important places that we
are not currently catching, but I'm not certain that simplifies this problem.

By at least matching the structure of the rest of proc we get more idiom reuse
and it becomes easier to spot problems in the way things are put together.

Later things like /proc/mounts are likely to be moved into proc_base as well.
If union mounts are ever supported we may be able to make /proc a union mount,
and properly split it into 2 filesystems.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In some places, particularly drivers and __init code, the init utsns is the
appropriate one to use.  This patch replaces those with a the init_utsname
helper.

Changes: Removed several uses of init_utsname().  Hope I picked all the
	right ones in net/ipv4/ipconfig.c.  These are now changed to
	utsname() (the per-process namespace utsname) in the previous
	patch (2/7)

[akpm@osdl.org: CIFS fix]
Signed-off-by: NSerge E. Hallyn <serue@us.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Andrey Savochkin <saw@sw.ru>
Cc: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Replace references to system_utsname to the per-process uts namespace
where appropriate.  This includes things like uname.

Changes: Per Eric Biederman's comments, use the per-process uts namespace
	for ELF_PLATFORM, sunrpc, and parts of net/ipv4/ipconfig.c

[jdike@addtoit.com: UML fix]
[clg@fr.ibm.com: cleanup]
[akpm@osdl.org: build fix]
Signed-off-by: NSerge E. Hallyn <serue@us.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Andrey Savochkin <saw@sw.ru>
Signed-off-by: NCedric Le Goater <clg@fr.ibm.com>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This moves the mount namespace into the nsproxy.  The mount namespace count
now refers to the number of nsproxies point to it, rather than the number of
tasks.  As a result, the unshare_namespace() function in kernel/fork.c no
longer checks whether it is being shared.
Signed-off-by: NSerge Hallyn <serue@us.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Andrey Savochkin <saw@sw.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

while doing a kernel make modules_install install over an NFS mount.

  =============================================
  [ INFO: possible recursive locking detected ]
  ---------------------------------------------
  nfsd/9550 is trying to acquire lock:
   (&inode->i_mutex){--..}, at: [<c034c845>] mutex_lock+0x1c/0x1f

  but task is already holding lock:
   (&inode->i_mutex){--..}, at: [<c034c845>] mutex_lock+0x1c/0x1f

  other info that might help us debug this:
  2 locks held by nfsd/9550:
   #0:  (hash_sem){..--}, at: [<cc895223>] exp_readlock+0xd/0xf [nfsd]
   #1:  (&inode->i_mutex){--..}, at: [<c034c845>] mutex_lock+0x1c/0x1f

  stack backtrace:
   [<c0103508>] show_trace_log_lvl+0x58/0x152
   [<c0103b8b>] show_trace+0xd/0x10
   [<c0103c2f>] dump_stack+0x19/0x1b
   [<c012aa57>] __lock_acquire+0x77a/0x9a3
   [<c012af4a>] lock_acquire+0x60/0x80
   [<c034c6c2>] __mutex_lock_slowpath+0xa7/0x20e
   [<c034c845>] mutex_lock+0x1c/0x1f
   [<c0162edc>] vfs_unlink+0x34/0x8a
   [<cc891d98>] nfsd_unlink+0x18f/0x1e2 [nfsd]
   [<cc89884f>] nfsd3_proc_remove+0x95/0xa2 [nfsd]
   [<cc88f0d4>] nfsd_dispatch+0xc0/0x178 [nfsd]
   [<c033e84d>] svc_process+0x3a5/0x5ed
   [<cc88f5ba>] nfsd+0x1a7/0x305 [nfsd]
   [<c0101005>] kernel_thread_helper+0x5/0xb
  DWARF2 unwinder stuck at kernel_thread_helper+0x5/0xb
  Leftover inexact backtrace:
   [<c0103b8b>] show_trace+0xd/0x10
   [<c0103c2f>] dump_stack+0x19/0x1b
   [<c012aa57>] __lock_acquire+0x77a/0x9a3
   [<c012af4a>] lock_acquire+0x60/0x80
   [<c034c6c2>] __mutex_lock_slowpath+0xa7/0x20e
   [<c034c845>] mutex_lock+0x1c/0x1f
   [<c0162edc>] vfs_unlink+0x34/0x8a
   [<cc891d98>] nfsd_unlink+0x18f/0x1e2 [nfsd]
   [<cc89884f>] nfsd3_proc_remove+0x95/0xa2 [nfsd]
   [<cc88f0d4>] nfsd_dispatch+0xc0/0x178 [nfsd]
   [<c033e84d>] svc_process+0x3a5/0x5ed
   [<cc88f5ba>] nfsd+0x1a7/0x305 [nfsd]
   [<c0101005>] kernel_thread_helper+0x5/0xb

  =============================================
  [ INFO: possible recursive locking detected ]
  ---------------------------------------------
  nfsd/9580 is trying to acquire lock:
   (&inode->i_mutex){--..}, at: [<c034cc1d>] mutex_lock+0x1c/0x1f

  but task is already holding lock:
   (&inode->i_mutex){--..}, at: [<c034cc1d>] mutex_lock+0x1c/0x1f

  other info that might help us debug this:
  2 locks held by nfsd/9580:
   #0:  (hash_sem){..--}, at: [<cc89522b>] exp_readlock+0xd/0xf [nfsd]
   #1:  (&inode->i_mutex){--..}, at: [<c034cc1d>] mutex_lock+0x1c/0x1f

  stack backtrace:
   [<c0103508>] show_trace_log_lvl+0x58/0x152
   [<c0103b8b>] show_trace+0xd/0x10
   [<c0103c2f>] dump_stack+0x19/0x1b
   [<c012aa63>] __lock_acquire+0x77a/0x9a3
   [<c012af56>] lock_acquire+0x60/0x80
   [<c034ca9a>] __mutex_lock_slowpath+0xa7/0x20e
   [<c034cc1d>] mutex_lock+0x1c/0x1f
   [<cc892ad1>] nfsd_setattr+0x2c8/0x499 [nfsd]
   [<cc893ede>] nfsd_create_v3+0x31b/0x4ac [nfsd]
   [<cc8984a1>] nfsd3_proc_create+0x128/0x138 [nfsd]
   [<cc88f0d4>] nfsd_dispatch+0xc0/0x178 [nfsd]
   [<c033ec1d>] svc_process+0x3a5/0x5ed
   [<cc88f5ba>] nfsd+0x1a7/0x305 [nfsd]
   [<c0101005>] kernel_thread_helper+0x5/0xb
  DWARF2 unwinder stuck at kernel_thread_helper+0x5/0xb
  Leftover inexact backtrace:
   [<c0103b8b>] show_trace+0xd/0x10
   [<c0103c2f>] dump_stack+0x19/0x1b
   [<c012aa63>] __lock_acquire+0x77a/0x9a3
   [<c012af56>] lock_acquire+0x60/0x80
   [<c034ca9a>] __mutex_lock_slowpath+0xa7/0x20e
   [<c034cc1d>] mutex_lock+0x1c/0x1f
   [<cc892ad1>] nfsd_setattr+0x2c8/0x499 [nfsd]
   [<cc893ede>] nfsd_create_v3+0x31b/0x4ac [nfsd]
   [<cc8984a1>] nfsd3_proc_create+0x128/0x138 [nfsd]
   [<cc88f0d4>] nfsd_dispatch+0xc0/0x178 [nfsd]
   [<c033ec1d>] svc_process+0x3a5/0x5ed
   [<cc88f5ba>] nfsd+0x1a7/0x305 [nfsd]
   [<c0101005>] kernel_thread_helper+0x5/0xb
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Neil Brown <neilb@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add /proc/fs/nfsd/pool_threads which allows the sysadmin (or a userspace
daemon) to read and change the number of nfsd threads in each pool.  The
format is a list of space-separated integers, one per pool.
Signed-off-by: NGreg Banks <gnb@melbourne.sgi.com>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Replace the existing list of all nfsd threads with new code using
svc_create_pooled().
Signed-off-by: NGreg Banks <gnb@melbourne.sgi.com>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

add svc_get() for those occasions when we need to temporarily bump up
svc_serv->sv_nrthreads as a pseudo refcount.
Signed-off-by: NGreg Banks <gnb@melbourne.sgi.com>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If lockd_up fails - what should we expect?  Do we have to later call
lockd_down?

Well the nfs client thinks "no", the nfs server thinks "yes".  lockd thinks
"yes".

The only answer that really makes sense is "no" !!

So:
  Make lockd_up only increment  nlmsvc_users on success.
  Make nfsd handle errors from lockd_up properly.
  Make sure lockd_up(0) never fails when lockd is running
    so that the 'reclaimer' call to lockd_up doesn't need to
    be error checked.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Thus it is printed for any path that leads to failure (make_socks is called
from two places).

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We should be checking the return value of lockd_up when adding a new socket to
nfsd.  So move the lockd_up before the svc_addsock and check the return value.

The move is because lockd_down is easy, but there is no easy way to remove a
recently added socket.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It isn't needed as it is available in rqstp->rq_server, and dropping it allows
some local vars to be dropped.

[akpm@osdl.org: build fix]
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

e_start acquires svc_export_cache.hash_lock, and e_stop releases it.  Add
lock annotations to these two functions so that sparse can check callers
for lock pairing, and so that sparse will not complain about these
functions since they intentionally use locks in this manner.
Signed-off-by: NJosh Triplett <josh@freedesktop.org>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NGreg Banks <gnb@melbourne.sgi.com>
Acked-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Userspace should create and bind a socket (but not connectted) and write the
'fd' to portlist.  This will cause the nfs server to listen on that socket.

To close a socket, the name of the socket - as read from 'portlist' can be
written to 'portlist' with a preceding '-'.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This file will list all ports that nfsd has open.
Default when TCP enabled will be
   ipv4 udp 0.0.0.0 2049
   ipv4 tcp 0.0.0.0 2049

Later, the list of ports will be settable.

'portlist' chosen rather than 'ports', to avoid unnecessary confusion with
non-mainline patches which created 'ports' with different semantics.

[akpm@osdl.org: cleanups, build fix]
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Separate out the code for creating a new service, and for creating initial
sockets.

Some of these new functions will have multiple callers soon.

[akpm@osdl.org: cleanups]
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We have an array 'nfsd_version' which lists the available versions of nfsd,
and 'nfsd_versions' (poor choice there :-() which lists the currently active
versions.

Then we have a bitmap - nfsd_versbits which says which versions are wanted.
The bits in this bitset cause content to be copied from nfsd_version to
nfsd_versions when nfsd starts.

This patch removes nfsd_versbits and moves information directly from
nfsd_version to nfsd_versions when requests for version changes arrive.

Note that this doesn't make it possible to change versions while the server is
running.  This is because serv->sv_xdrsize is calculated when a service is
created, and used when threads are created, and xdrsize depends on the active
versions.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Currently lockd listens on UDP always, and TCP if CONFIG_NFSD_TCP is set.

However as lockd performs services of the client as well, this is a problem.
If CONFIG_NfSD_TCP is not set, and a tcp mount is used, the server will not be
able to call back to lockd.

So:
 - add an option to lockd_up saying which protocol is needed
 - Always open sockets for which an explicit port was given, otherwise
   only open a socket of the type required
 - Change nfsd to do one lockd_up per socket rather than one per thread.

This
 - removes the dependancy on CONFIG_NFSD_TCP
 - means that lockd may open sockets other than at startup
 - means that lockd will *not* listen on UDP if the only
   mounts are TCP mount (and nfsd hasn't started).

The latter is the only one that concerns me at all - I don't know if this
might be a problem with some servers.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

nfsd has some cleanup that it wants to do when the last thread exits, and
there will shortly be some more.  So collect this all into one place and
define a callback for an rpc service to call when the service is about to be
destroyed.

[akpm@osdl.org: cleanups, build fix]
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NGreg Banks <gnb@melbourne.sgi.com>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NGreg Banks <gnb@melbourne.sgi.com>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>