Local variable 'autoneg' doesn't even exist:

drivers/net/phy/marvell.c: In function 'm88e1121_config_aneg':
drivers/net/phy/marvell.c:468:25: error: 'autoneg' undeclared (first use in this function); did you mean 'put_net'?
  if (phydev->autoneg != autoneg || changed) {
                         ^~~~~~~

Fixes: d6ab9336 ("net: phy: marvell: Avoid unnecessary soft reset")
Reported-by: NVakul Garg <vakul.garg@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes: ed842fae ("bridge: suppress nd pkts on BR_NEIGH_SUPPRESS ports")
Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf-next 2018-09-25

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Allow for RX stack hardening by implementing the kernel's flow
   dissector in BPF. Idea was originally presented at netconf 2017 [0].
   Quote from merge commit:

     [...] Because of the rigorous checks of the BPF verifier, this
     provides significant security guarantees. In particular, the BPF
     flow dissector cannot get inside of an infinite loop, as with
     CVE-2013-4348, because BPF programs are guaranteed to terminate.
     It cannot read outside of packet bounds, because all memory accesses
     are checked. Also, with BPF the administrator can decide which
     protocols to support, reducing potential attack surface. Rarely
     encountered protocols can be excluded from dissection and the
     program can be updated without kernel recompile or reboot if a
     bug is discovered. [...]

   Also, a sample flow dissector has been implemented in BPF as part
   of this work, from Petar and Willem.

   [0] http://vger.kernel.org/netconf2017_files/rx_hardening_and_udp_gso.pdf

2) Add support for bpftool to list currently active attachment
   points of BPF networking programs providing a quick overview
   similar to bpftool's perf subcommand, from Yonghong.

3) Fix a verifier pruning instability bug where a union member
   from the register state was not cleared properly leading to
   branches not being pruned despite them being valid candidates,
   from Alexei.

4) Various smaller fast-path optimizations in XDP's map redirect
   code, from Jesper.

5) Enable to recognize BPF_MAP_TYPE_REUSEPORT_SOCKARRAY maps
   in bpftool, from Roman.

6) Remove a duplicate check in libbpf that probes for function
   storage, from Taeung.

7) Fix an issue in test_progs by avoid checking for errno since
   on success its value should not be checked, from Mauricio.

8) Fix unused variable warning in bpf_getsockopt() helper when
   CONFIG_INET is not configured, from Anders.

9) Fix a compilation failure in the BPF sample code's use of
   bpf_flow_keys, from Prashant.

10) Minor cleanups in BPF code, from Yue and Zhong.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver uses devm_ioremap_resource() which is only available when
CONFIG_HAS_IOMEM is set, make the driver depend on this config option.
User mode Linux does not have CONFIG_HAS_IOMEM set and the driver was
failing on this architecture.

Fixes: 14fceff4 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Reported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: phy: Eliminate unnecessary soft

This patch series eliminates unnecessary software resets of the PHY.
This should hopefully not break anybody's hardware; but I would
appreciate testing to make sure this is is the case.

Sorry for this long email list, I wanted to make sure I reached out to
all people who made changes to the Marvell PHY driver.

Thank you!

Changes since RFT:

- added Tested-by tags from Wang, Dongsheng, Andrew, Chris and Clemens
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The BMCR.RESET bit on the Marvell PHYs has a special meaning in that
it commits the register writes into the HW for it to latch and be
configured appropriately. Doing software resets causes link drops, and
this is unnecessary disruption if nothing changed.

Determine from marvell_set_polarity()'s return code whether the register value
was changed and if it was, propagate that to the logic that hits the software
reset bit.

This avoids doing unnecessary soft reset if the PHY is configured in
the same state it was previously, this also eliminates the need for a
m88e1111_config_aneg() function since it now is the same as
marvell_config_aneg().
Tested-by: NWang, Dongsheng <dongsheng.wang@hxt-semitech.com>
Tested-by: NChris Healy <cphealy@gmail.com>
Tested-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NClemens Gruber <clemens.gruber@pqgruber.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While consolidating the PHY reset in phy_init_hw() an unconditionaly
BMCR soft-reset I became quite trigger happy with those. This was later
on deactivated for the Generic PHY driver on the premise that a prior
software entity (e.g: bootloader) might have applied workarounds in
commit 0878fff1 ("net: phy: Do not perform software reset for
Generic PHY").

Since we have a hook to wire-up a soft_reset callback, just use that and
get rid of the call to genphy_soft_reset() entirely. This speeds up
initialization and link establishment for most PHYs out there that do
not require a reset.

Fixes: 87aa9f9c ("net: phy: consolidate PHY reset in phy_init_hw()")
Tested-by: NWang, Dongsheng <dongsheng.wang@hxt-semitech.com>
Tested-by: NChris Healy <cphealy@gmail.com>
Tested-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NClemens Gruber <clemens.gruber@pqgruber.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2018-09-25

This series contains updates to i40e and xsk.

Mariusz fixes an issue where the VF link state was not being updated
properly when the PF is down or up.  Also cleaned up the promiscuous
configuration during a VF reset.

Patryk simplifies the code a bit to use the variables for PF and HW that
are declared, rather than using the VSI pointers.  Cleaned up the
message length parameter to several virtchnl functions, since it was not
being used (or needed).

Harshitha fixes two potential race conditions when trying to change VF
settings by creating a helper function to validate that the VF is
enabled and that the VSI is set up.

Sergey corrects a double "link down" message by putting in a check for
whether or not the link is up or going down.

Björn addresses an AF_XDP zero-copy issue that buffers passed
from userspace to the kernel was leaked when the hardware descriptor
ring was torn down.  A zero-copy capable driver picks buffers off the
fill ring and places them on the hardware receive ring to be completed at
a later point when DMA is complete. Similar on the transmit side; The
driver picks buffers off the transmit ring and places them on the
transmit hardware ring.

In the typical flow, the receive buffer will be placed onto an receive
ring (completed to the user), and the transmit buffer will be placed on
the completion ring to notify the user that the transfer is done.

However, if the driver needs to tear down the hardware rings for some
reason (interface goes down, reconfiguration and such), the userspace
buffers cannot be leaked. They have to be reused or completed back to
userspace.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Vlad Buslov says:

====================
Refactor classifier API to work with Qdisc/blocks without rtnl lock

Currently, all netlink protocol handlers for updating rules, actions and
qdiscs are protected with single global rtnl lock which removes any
possibility for parallelism. This patch set is a third step to remove
rtnl lock dependency from TC rules update path.

Recently, new rtnl registration flag RTNL_FLAG_DOIT_UNLOCKED was added.
Handlers registered with this flag are called without RTNL taken. End
goal is to have rule update handlers(RTM_NEWTFILTER, RTM_DELTFILTER,
etc.) to be registered with UNLOCKED flag to allow parallel execution.
However, there is no intention to completely remove or split rtnl lock
itself. This patch set addresses specific problems in implementation of
classifiers API that prevent its control path from being executed
concurrently. Additional changes are required to refactor classifiers
API and individual classifiers for parallel execution. This patch set
lays groundwork to eventually register rule update handlers as
rtnl-unlocked by modifying code in cls API that works with Qdiscs and
blocks. Following patch set does the same for chains and classifiers.

The goal of this change is to refactor tcf_block_find() and its
dependencies to allow concurrent execution:
- Extend Qdisc API with rcu to lookup and take reference to Qdisc
  without relying on rtnl lock.
- Extend tcf_block with atomic reference counting and rcu.
- Always take reference to tcf_block while working with it.
- Implement tcf_block_release() to release resources obtained by
  tcf_block_find()
- Create infrastructure to allow registering Qdiscs with class ops that
  do not require the caller to hold rtnl lock.

All three netlink rule update handlers use tcf_block_find() to lookup
Qdisc and block, and this patch set introduces additional means of
synchronization to substitute rtnl lock in cls API.

Some functions in cls and sch APIs have historic names that no longer
clearly describe their intent. In order not make this code even more
confusing when introducing their concurrency-friendly versions, rename
these functions to describe actual implementation.

Changes from V2 to V3:
- Patch 1:
  - Explicitly include refcount.h in rtnetlink.h.
- Patch 3:
  - Move rcu_head field to the end of struct Qdisc.
  - Rearrange local variable declarations in qdisc_lookup_rcu().
- Patch 5:
  - Remove tcf_qdisc_put() and inline its content to callers.

Changes from V1 to V2:
- Rebase on latest net-next.
- Patch 8 - remove.
- Patch 9 - fold into patch 11.
- Patch 11:
  - Rename tcf_block_{get|put}() to tcf_block_refcnt_{get|put}().
- Patch 13 - remove.
====================
Acked-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to remove dependency on rtnl lock on rules update path, always
take reference to block while using it on rules update path. Change
tcf_block_get() error handling to properly release block with reference
counting, instead of just destroying it, in order to accommodate potential
concurrent users.
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implement get/put function for blocks that only take/release the reference
and perform deallocation. These functions are intended to be used by
unlocked rules update path to always hold reference to block while working
with it. They use on new fine-grained locking mechanisms introduced in
previous patches in this set, instead of relying on global protection
provided by rtnl lock.

Extract code that is common with tcf_block_detach_ext() into common
function __tcf_block_put().

Extend tcf_block with rcu to allow safe deallocation when it is accessed
concurrently.
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Protect block idr access with spinlock, instead of relying on rtnl lock.
Take tn->idr_lock spinlock during block insertion and removal.
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Extract code that flushes and puts all chains on tcf block to two
standalone function to be shared with functions that locklessly get/put
reference to block.
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As a preparation for removing rtnl lock dependency from rules update path,
change tcf block reference counter type to refcount_t to allow modification
by concurrent users.

In block put function perform decrement and check reference counter once to
accommodate concurrent modification by unlocked users. After this change
tcf_chain_put at the end of block put function is called with
block->refcnt==0 and will deallocate block after the last chain is
released, so there is no need to manually deallocate block in this case.
However, if block reference counter reached 0 and there are no chains to
release, block must still be deallocated manually.
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As a preparation from removing rtnl lock dependency from rules update path,
use Qdisc rcu and reference counting capabilities instead of relying on
rtnl lock while working with Qdiscs. Create new tcf_block_release()
function, and use it to free resources taken by tcf_block_find().
Currently, this function only releases Qdisc and it is extended in next
patches in this series.
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implement function to take reference to Qdisc that relies on rcu read lock
instead of rtnl mutex. Function only takes reference to Qdisc if reference
counter isn't zero. Intended to be used by unlocked cls API.
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, Qdisc API functions assume that users have rtnl lock taken. To
implement rtnl unlocked classifiers update interface, Qdisc API must be
extended with functions that do not require rtnl lock.

Extend Qdisc structure with rcu. Implement special version of put function
qdisc_put_unlocked() that is called without rtnl lock taken. This function
only takes rtnl lock if Qdisc reference counter reached zero and is
intended to be used as optimization.
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Current implementation of qdisc_destroy() decrements Qdisc reference
counter and only actually destroy Qdisc if reference counter value reached
zero. Rename qdisc_destroy() to qdisc_put() in order for it to better
describe the way in which this function currently implemented and used.

Extract code that deallocates Qdisc into new private qdisc_destroy()
function. It is intended to be shared between regular qdisc_put() and its
unlocked version that is introduced in next patch in this series.
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rtnl lock is encapsulated in netlink and cannot be accessed by other
modules directly. This means that reference counted objects that rely on
rtnl lock cannot use it with refcounter helper function that atomically
releases decrements reference and obtains mutex.

This patch implements simple wrapper function around refcount_dec_and_lock
that obtains rtnl lock if reference counter value reached 0.
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When an AF_XDP UMEM is attached to any of the Rx rings, we disallow a
user to change the number of descriptors via e.g. "ethtool -G IFNAME".

Otherwise, the size of the stash/reuse queue can grow unbounded, which
would result in OOM or leaking userspace buffers.
Signed-off-by: NBjörn Töpel <bjorn.topel@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Outstanding Rx descriptors are temporarily stored on a stash/reuse
queue. When/if the HW rings comes up again, entries from the stash are
used to re-populate the ring.

The latter required some restructuring of the allocation scheme for
the AF_XDP zero-copy implementation. There is now a fast, and a slow
allocation. The "fast allocation" is used from the fast-path and
obtains free buffers from the fill ring and the internal recycle
mechanism. The "slow allocation" is only used in ring setup, and
obtains buffers from the fill ring and the stash (if any).
Signed-off-by: NBjörn Töpel <bjorn.topel@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

XSK UMEM is strongly single producer single consumer so reuse of
frames is challenging.  Add a simple "stash" of FILL packets to
reuse for drivers to optionally make use of.  This is useful
when driver has to free (ndo_stop) or resize a ring with an active
AF_XDP ZC socket.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

When the zero-copy enabled XDP Tx ring is torn down, due to
configuration changes, outstanding frames on the hardware descriptor
ring are queued on the completion ring.

The completion ring has a back-pressure mechanism that will guarantee
that there is sufficient space on the ring.
Signed-off-by: NBjörn Töpel <bjorn.topel@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

msglen parameter seems to be unused in several virtchnl function.
This patch removes it from signatures of those functions.
Signed-off-by: NPatryk Małek <patryk.malek@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

When isup is false meaning that interface is going to shut down
set new speed to 0 to avoid double 'NIC Link is Down' messages.
Signed-off-by: NSergey Nemov <sergey.nemov@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

When we are trying to change VF settings, it is possible for 2 race
conditions to happen. One, when the VF is created but not yet enabled.
Second, the VF is enabled but the VSI is still not created or not yet
re-created in the VF reset flow.

This patch introduces a helper function to validate that the VF is
enabled and that the VSI is set up. This patch also calls this
function from other functions which could get into these race conditions.
While we are poking around here, remove unnecessary parenthesis that
checkpatch was complaining about.
Signed-off-by: NHarshitha Ramamurthy <harshitha.ramamurthy@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

In order to slightly simplify the code use the variables for pf and hw
that are declared in i40e_set_mac function.
Signed-off-by: NPatryk Małek <patryk.malek@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch cleans up promiscuous configuration when a VF reset occurs.
Previously the promiscuous mode settings were still there after the VF
driver removal.
Signed-off-by: NMariusz Stachura <mariusz.stachura@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This resolves an issue where the VF link state was not being updated
when the PF is down or up, and the VF link state would always show
that it is running.
Signed-off-by: NMariusz Stachura <mariusz.stachura@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

During socket close, if there is a open record with tx context, it needs
to be be freed apart from freeing up plaintext and encrypted scatter
lists. This patch frees up the open record if present in tx context.

Also tls_free_both_sg() has been renamed to tls_free_open_rec() to
indicate that the free record in tx context is being freed inside the
function.

Fixes: a42055e8 ("net/tls: Add support for async encryption")
Signed-off-by: NVakul Garg <vakul.garg@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Current async encryption implementation sometimes showed up socket
memory accounting error during socket close. This results in kernel
warning calltrace. The root cause of the problem is that socket var
sk_forward_alloc gets corrupted due to access in sk_mem_charge()
and sk_mem_uncharge() being invoked from multiple concurrent contexts
in multicore processor. The apis sk_mem_charge() and sk_mem_uncharge()
are called from functions alloc_plaintext_sg(), free_sg() etc. It is
required that memory accounting apis are called under a socket lock.

The plaintext sg data sent for encryption is freed using free_sg() in
tls_encryption_done(). It is wrong to call free_sg() from this function.
This is because this function may run in irq context. We cannot acquire
socket lock in this function.

We remove calling of function free_sg() for plaintext data from
tls_encryption_done() and defer freeing up of plaintext data to the time
when the record is picked up from tx_list and transmitted/freed. When
tls_tx_records() gets called, socket is already locked and thus there is
no concurrent access problem.

Fixes: a42055e8 ("net/tls: Add support for async encryption")
Signed-off-by: NVakul Garg <vakul.garg@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Version bump conflict in batman-adv, take what's in net-next.

iavf conflict, adjustment of netdev_ops in net-next conflicting
with poll controller method removal in net.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Clear ADDR64 dma bit in DMACFG register in case that HW_DMA_CAP_64B is
not detected on 64bit system.
The issue was observed when bootloader(u-boot) does not check macb
feature at DCFG6 register (DAW64_OFFSET) and enabling 64bit dma support
by default. Then macb driver is reading DMACFG register back and only
adding 64bit dma configuration but not cleaning it out.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Acked-by: NNicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Heiner Kallweit says:

====================
r8169: series with smaller improvements

This series includes smaller improvements, nothing exciting.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The check for pci_is_pcie() is redundant here because all
chip versions >=18 are PCIe only anyway. In addition use
dma_set_mask_and_coherent() instead of separate calls to
pci_set_dma_mask() and pci_set_consistent_dma_mask().
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Code can be slightly simplified by acking even events we're not
interested in. In addition add a comment making clear that the
read has no functional purpose and is just a PCI commit.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The networking core has a default watchdog timeout of 5s. I see no
need to define an own timeout of 6s which is basically the same.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

James writes:
  "SCSI fixes on 20180925

   Nine obvious bug fixes mostly in individual drivers.  The target fix
   is of particular importance because it's CVE related."

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sd: don't crash the host on invalid commands
  scsi: ipr: System hung while dlpar adding primary ipr adapter back
  scsi: target: iscsi: Use bin2hex instead of a re-implementation
  scsi: target: iscsi: Use hex2bin instead of a re-implementation
  scsi: lpfc: Synchronize access to remoteport via rport
  scsi: ufs: Disable blk-mq for now
  scsi: sd: Contribute to randomness when running rotational device
  scsi: ibmvscsis: Ensure partition name is properly NUL terminated
  scsi: ibmvscsis: Fix a stringop-overflow warning

I wrote:
  "USB fixes for 4.19-rc6

   Here are some small USB core and driver fixes for reported issues for
   4.19-rc6.

   The most visible is the oops fix for when the USB core is built into the
   kernel that is present in 4.18.  Turns out not many people actually do
   that so it went unnoticed for a while.  The rest is some tiny typec,
   musb, and other core fixes.

   All have been in linux-next with no reported issues."

* tag 'usb-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: typec: mux: Take care of driver module reference counting
  usb: core: safely deal with the dynamic quirk lists
  usb: roles: Take care of driver module reference counting
  USB: handle NULL config in usb_find_alt_setting()
  USB: fix error handling in usb_driver_claim_interface()
  USB: remove LPM management from usb_driver_claim_interface()
  USB: usbdevfs: restore warning for nonsensical flags
  USB: usbdevfs: sanitize flags more
  Revert "usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()"
  usb: musb: dsps: do not disable CPPI41 irq in driver teardown

BPF flow dissectors are configured per network namespace.
__skb_flow_dissect looks up the netns through dev_net(skb->dev).

In some dissector paths skb->dev is NULL, such as for Unix sockets.
In these cases fall back to looking up the netns by socket.

Analyzing the codepaths leading to __skb_flow_dissect I did not find
a case where both skb->dev and skb->sk are NULL. Warn and fall back to
standard flow dissector if one is found.

Fixes: d58e468b ("flow_dissector: implements flow dissector BPF hook")
Reported-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Acked-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>