- 10 1月, 2018 11 次提交
-
-
由 Christoph Hellwig 提交于
This is not needed in drivers, so move it to a private header. Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Christoph Hellwig 提交于
Always returning 1 is the same behavior as not supplying a method at all. Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Christoph Hellwig 提交于
This frees the dma_direct_* namespace for a generic implementation. Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Christoph Hellwig 提交于
We want to use the dma_direct_ namespace for a generic implementation, so rename powerpc to the second best choice: dma_nommu_. Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NRichard Kuo <rkuo@codeaurora.org>
-
由 Christoph Hellwig 提交于
And unlike the other helpers we don't require a <asm/dma-direct.h> as this helper is a special case for ia64 only, and this keeps it as simple as possible. Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Christoph Hellwig 提交于
phys_to_dma, dma_to_phys and dma_capable are helpers published by architecture code for use of swiotlb and xen-swiotlb only. Drivers are not supposed to use these directly, but use the DMA API instead. Move these to a new asm/dma-direct.h helper, included by a linux/dma-direct.h wrapper that provides the default linear mapping unless the architecture wants to override it. In the MIPS case the existing dma-coherent.h is reused for now as untangling it will take a bit of work. Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NRobin Murphy <robin.murphy@arm.com>
-
由 Christoph Hellwig 提交于
This makes it match the generic version. Reported-by: NVladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Christoph Hellwig 提交于
The generic version now takes dma_pfn_offset into account, so there is no more need for an architecture override. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NRobin Murphy <robin.murphy@arm.com>
-
由 Christoph Hellwig 提交于
This makes sure the generic version can be used with architectures / devices that have a DMA offset in the direct mapping. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NRobin Murphy <robin.murphy@arm.com>
-
- 09 1月, 2018 8 次提交
-
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Christoph Hellwig 提交于
We always use the stub definitions, so remove the unused other code. Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Christoph Hellwig 提交于
CONFIG_ALPHA_JENSEN has failed to compile since commit 6aca0503 ("alpha/dma: use common noop dma ops"), so mark it as broken. Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
- 08 1月, 2018 5 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull parisc fixes from Helge Deller: - Many small fixes to show the real physical addresses of devices instead of hashed addresses. - One important fix to unbreak 32-bit SMP support: We forgot to 16-byte align the spinlocks in the assembler code. - Qemu support: The host will get a chance to sleep when the parisc guest is idle. We use the same mechanism as the power architecture by overlaying the "or %r10,%r10,%r10" instruction which is simply a nop on real hardware. * 'parisc-4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: qemu idle sleep support parisc: Fix alignment of pa_tlb_lock in assembly on 32-bit SMP kernel parisc: Show unhashed EISA EEPROM address parisc: Show unhashed HPA of Dino chip parisc: Show initial kernel memory layout unhashed parisc: Show unhashed hardware inventory
-
由 Linus Torvalds 提交于
Merge tag 'apparmor-pr-2018-01-07' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor Pull apparmor fix from John Johansen: "This fixes a regression when the kernel feature set is reported as supporting mount and policy is pinned to a feature set that does not support mount mediation" * tag 'apparmor-pr-2018-01-07' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: apparmor: fix regression in mount mediation when feature set is pinned
-
由 Linus Torvalds 提交于
Merge tag 'led_fixes_for_4.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED fix from Jacek Anaszewski: "The commit 2b83ff96 for 4.15-rc6, which was fixing LED brightness setting after clearing delay_off broke the behavior on any alteration of delay_on{off} properties, due to use of a LED core helper that does too much for this particular case" * tag 'led_fixes_for_4.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: core: Fix regression caused by commit 2b83ff96
-
git://git.infradead.org/linux-mtd由 Linus Torvalds 提交于
Pull MTD bugfix from Richard Weinberger: "A single fix for the pxa3xx NAND driver" * tag 'for-linus-20180107' of git://git.infradead.org/linux-mtd: mtd: nand: pxa3xx: Fix READOOB implementation
-
- 07 1月, 2018 6 次提交
-
-
由 Jacek Anaszewski 提交于
Commit 2b83ff96 ("led: core: Fix brightness setting when setting delay_off=0") replaced del_timer_sync(&led_cdev->blink_timer) with led_stop_software_blink() in led_blink_set(), which additionally clears LED_BLINK_SW flag as well as zeroes blink_delay_on and blink_delay_off properties of the struct led_classdev. Cleansing of the latter ones wasn't required to fix the original issue but wasn't considered harmful. It nonetheless turned out to be so in case when pointer to one or both props is passed to led_blink_set() like in the ledtrig-timer.c. In such cases zeroes are passed later in delay_on and/or delay_off arguments to led_blink_setup(), which results either in stopping the software blinking or setting blinking frequency always to 1Hz. Avoid using led_stop_software_blink() and add a single call required to clear LED_BLINK_SW flag, which was the only needed modification to fix the original issue. Fixes 2b83ff96 ("led: core: Fix brightness setting when setting delay_off=0") Signed-off-by: NJacek Anaszewski <jacek.anaszewski@gmail.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs fixes from Al Viro: - untangle sys_close() abuses in xt_bpf - deal with register_shrinker() failures in sget() * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix "netfilter: xt_bpf: Fix XT_BPF_MODE_FD_PINNED mode of 'xt_bpf_info_v1'" sget(): handle failures of register_shrinker() mm,vmscan: Make unregister_shrinker() no-op if register_shrinker() failed.
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fixes from Radim Krčmář: "s390: - Two fixes for potential bitmap overruns in the cmma migration code x86: - Clear guest provided GPRs to defeat the Project Zero PoC for CVE 2017-5715" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: vmx: Scrub hardware GPRs at VM-exit KVM: s390: prevent buffer overrun on memory hotplug during migration KVM: s390: fix cmma migration for multiple memory slots
-
由 Boris Brezillon 提交于
In the current driver, OOB bytes are accessed in raw mode, and when a page access is done with NDCR_SPARE_EN set and NDCR_ECC_EN cleared, the driver must read the whole spare area (64 bytes in case of a 2k page, 16 bytes for a 512 page). The driver was only reading the free OOB bytes, which was leaving some unread data in the FIFO and was somehow leading to a timeout. We could patch the driver to read ->spare_size + ->ecc_size instead of just ->spare_size when READOOB is requested, but we'd better make in-band and OOB accesses consistent. Since the driver is always accessing in-band data in non-raw mode (with the ECC engine enabled), we should also access OOB data in this mode. That's particularly useful when using the BCH engine because in this mode the free OOB bytes are also ECC protected. Fixes: 43bcfd2b ("mtd: nand: pxa3xx: Add driver-specific ECC BCH support") Cc: stable@vger.kernel.org Reported-by: NSean Nyekjær <sean.nyekjaer@prevas.dk> Tested-by: NWilly Tarreau <w@1wt.eu> Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Acked-by: NEzequiel Garcia <ezequiel@vanguardiasur.com.ar> Tested-by: NSean Nyekjaer <sean.nyekjaer@prevas.dk> Acked-by: NRobert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: NRichard Weinberger <richard@nod.at>
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux由 Linus Torvalds 提交于
Pull powerpc fix from Michael Ellerman: "Just one fix to correctly return SEGV_ACCERR when we take a SEGV on a mapped region. The bug was introduced in the refactoring of the page fault handler we did in the previous release. Thanks to John Sperbeck" * tag 'powerpc-4.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm: Fix SEGV on mapped region to return SEGV_ACCERR
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux由 Radim Krčmář 提交于
KVM: s390: fixes for cmma migration Two fixes for potential bitmap overruns in the cmma migration code.
-
- 06 1月, 2018 10 次提交
-
-
由 Helge Deller 提交于
Add qemu idle sleep support when running under qemu with SeaBIOS PDC firmware. Like the power architecture we use the "or" assembler instructions, which translate to nops on real hardware, to indicate that qemu shall idle sleep. Signed-off-by: NHelge Deller <deller@gmx.de> Cc: Richard Henderson <rth@twiddle.net> CC: stable@vger.kernel.org # v4.9+
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input fixes from Dmitry Torokhov: "Just a few driver fixups, nothing exciting" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xen-kbdfront - do not advertise multi-touch pressure support Input: hideep - fix compile error due to missing include file Input: elants_i2c - do not clobber interrupt trigger on x86 Input: joystick/analog - riscv has get_cycles() Input: elantech - add new icbody type 15 Input: ims-pcu - fix typo in the error message
-
git://github.com/awilliam/linux-vfio由 Linus Torvalds 提交于
Pull IOMMU fixes from Alex Williamson: "Fixes via Will Deacon for arm-smmu-v3. - Fix duplicate Stream ID handling in arm-smmu-v3 - Fix arm-smmu-v3 page table ops double free" * tag 'iommu-v4.15-rc7' of git://github.com/awilliam/linux-vfio: iommu/arm-smmu-v3: Cope with duplicated Stream IDs iommu/arm-smmu-v3: Don't free page table ops twice
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc由 Linus Torvalds 提交于
Pull ARC fixes from Vineet Gupta: - platform updates for setting up clock correctly - fixes to accomodate newer gcc (__builtin_trap, removed inline asm modifier) - other fixes * tag 'arc-4.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: handle gcc generated __builtin_trap for older compiler ARC: handle gcc generated __builtin_trap() ARC: uaccess: dont use "l" gcc inline asm constraint modifier ARC: [plat-axs103] refactor the quad core DT quirk code ARC: [plat-axs103]: Set initial core pll output frequency ARC: [plat-hsdk]: Get rid of core pll frequency set in platform code ARC: [plat-hsdk]: Set initial core pll output frequency ARC: [plat-hsdk] Switch DisplayLink driver from fbdev to DRM arc: do not use __print_symbol() ARC: Fix detection of dual-issue enabled
-
由 John Johansen 提交于
When the mount code was refactored for Labels it was not correctly updated to check whether policy supported mediation of the mount class. This causes a regression when the kernel feature set is reported as supporting mount and policy is pinned to a feature set that does not support mount mediation. BugLink: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=882697#41 Fixes: 2ea3ffb7 ("apparmor: add mount mediation") Reported-by: NFabian Grünbichler <f.gruenbichler@proxmox.com> Cc: Stable <stable@vger.kernel.org> Signed-off-by: NJohn Johansen <john.johansen@canonical.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux由 Linus Torvalds 提交于
Pull btrfs fixes from David Sterba: "We have two more fixes for 4.15, both aimed for stable. The leak fix is obvious, the second patch fixes a bug revealed by the refcount API, when it behaves differently than previous atomic_t and reports refs going from 0 to 1 in one case" * tag 'for-4.15-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix refcount_t usage when deleting btrfs_delayed_nodes btrfs: Fix flush bio leak
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linux由 Linus Torvalds 提交于
Pull XFS fixes from Darrick Wong: "I have just a few fixes for bugs and resource cleanup problems this week: - Fix resource cleanup of failed quota initialization - Fix integer overflow problems wrt s_maxbytes" * tag 'xfs-4.15-fixes-10' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix s_maxbytes overflow problems xfs: quota: check result of register_shrinker() xfs: quota: fix missed destroy of qi_tree_lock
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd由 Linus Torvalds 提交于
Pull MFD fix from Lee Jones: "Late bugfix to plug a leak in rtsx_pcr" * tag 'mfd-fixes-4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: rtsx: Release IRQ during shutdown
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull more x86 pti fixes from Thomas Gleixner: "Another small stash of fixes for fallout from the PTI work: - Fix the modules vs. KASAN breakage which was caused by making MODULES_END depend of the fixmap size. That was done when the cpu entry area moved into the fixmap, but now that we have a separate map space for that this is causing more issues than it solves. - Use the proper cache flush methods for the debugstore buffers as they are mapped/unmapped during runtime and not statically mapped at boot time like the rest of the cpu entry area. - Make the map layout of the cpu_entry_area consistent for 4 and 5 level paging and fix the KASLR vaddr_end wreckage. - Use PER_CPU_EXPORT for per cpu variable and while at it unbreak nvidia gfx drivers by dropping the GPL export. The subject line of the commit tells it the other way around, but I noticed that too late. - Fix the ASM alternative macros so they can be used in the middle of an inline asm block. - Rename the BUG_CPU_INSECURE flag to BUG_CPU_MELTDOWN so the attack vector is properly identified. The Spectre mitigations will come with their own bug bits later" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/pti: Rename BUG_CPU_INSECURE to BUG_CPU_MELTDOWN x86/alternatives: Add missing '\n' at end of ALTERNATIVE inline asm x86/tlb: Drop the _GPL from the cpu_tlbstate export x86/events/intel/ds: Use the proper cache flush method for mapping ds buffers x86/kaslr: Fix the vaddr_end mess x86/mm: Map cpu_entry_area at the same place on 4/5 level x86/mm: Set MODULES_END to 0xffffffffff000000
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull EFI updates from Thomas Gleixner: - A fix for a add_efi_memmap parameter regression which ensures that the parameter is parsed before it is used. - Reinstate the virtual capsule mapping as the cached copy turned out to break Quark and other things - Remove Matt Fleming as EFI co-maintainer. He stepped back a few days ago. Thanks Matt for all your great work! * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MAINTAINERS: Remove Matt Fleming as EFI co-maintainer efi/capsule-loader: Reinstate virtual capsule mapping x86/efi: Fix kernel param add_efi_memmap regression
-