This patch adds support for PF maximum bandwidth update
or configuration notified by management firmware.
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com>
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds relevant APIs needed to configure WFQ
(Weighted fair queueing) values for the vports. WFQ configuration
is used per vport basis when minimum bandwidth update/configuration
is notified to the PF by the management firmware.
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com>
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hariprasad Shenai says:

====================
cxgb4: minor fixes, decode msgs and code refactor for few functions

This patch series adds new routine to get adapter information and removes
some redundant messages logged in dmesg. Fixes race while freeing tx
descriptors. Decodes module type and link down reason codes obtained from
firmware. Refactor port initialization and FW_PORT_CMD handling. Pass
correct port id in DCB message handler to obtain netdev associated.

This patch series has been created against net-next tree and includes
patches on cxgb4 driver.

We have included all the maintainers of respective drivers. Kindly review
the change and let us know in case of any review comments.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The firmware can send a set of asynchronous replies through FW_PORT_CMD
with DCBX information when that's negotiated with the Link Peer. The old
code always assumed that a FW_PORT_CMD reply was always a Get Port
Information message. This change conditionalizes the code to only handle
the Get Port Information messages and throws a warning if we don't
understand what we've been given.

Also refactor t4_handle_fw_rpl() so that core functionality performed by
t4_handle_get_port_info() for a specified port.
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Refactor t4_port_init() so that the core functionality is done by
t4_init_portinfo() for a particular port. Also rename variables to
sensible ones.
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Decode and log port module error, unknown modules and unsupported
modules.
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There could be race between t4_eth_xmit() and t4_free_sge_resources() while
freeing tx descriptors, take txq lock in t4_free_sge_resources(). We need
to stop the xmit frame path which runs in bottom half context while
unloading the driver using _bh variant of the lock. This is to prevent
the deadlock between xmit and driver unload.
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add new routine to print out general adapter information (various version
numbers, adapter name, part number, serial number, etc.) and remove
redundant information dumped in the Port Information.
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2016-04-26

Here's another set of Bluetooth & 802.15.4 patches for the 4.7 kernel:

 - Cleanups & refactoring of ieee802154 & 6lowpan code
 - Security related additions to ieee802154 and mrf24j40 driver
 - Memory corruption fix to Bluetooth 6lowpan code
 - Race condition fix in vhci driver
 - Enhancements to the atusb 802.15.4 driver

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Nicolas Dichtel says:

====================
netlink: align attributes when needed (patchset #3)

This is the continuation (series #3) of the work done to align netlink
attributes when these attributes contain some 64-bit fields.

It's the last patchset from what I've seen.

The last user of nla_put_u64() is block/drbd. This module does not use
standard netlink API (see all the stuff in include/linux/genl_magic_struct.h
and include/linux/genl_magic_func.h). I didn't modify it because it's seems
hard to do it whithout testing and fully understanding the context (for
example, why include/linux/drbd_genl.h is not part of uapi?).
Any thoughts?
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I also fix commit 8b32ab9e6ef1: use nla_total_size_64bit() for
OVS_FLOW_ATTR_USED in ovs_flow_cmd_msg_size().

Fixes: 8b32ab9e6ef1 ("ovs: use nla_put_u64_64bit()")
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I also fix the value of INET_DIAG_MAX. It's wrong since commit 8f840e47
which is only in net-next right now, thus I didn't make a separate patch.

Fixes: 8f840e47 ("sctp: add the sctp_diag.c file")
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: NJan Kara <jack@suse.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Tom Herbert says:

====================
ila: Support for checksum neutral translations

This patch set updates ILA to support draft-herbert-nvo3-ila-02. The
primary addition is support checksum neutral ILA translation.
This allows address to be performed and still keep any transport
layer checksums that include the addresses in their pseudo header to
still be correct without the translator needing to parse L4.

Other items are:
   - Structures for ILA addresses, identifiers, locators
   - Disallow translation on non-ILA addresses (check by
     type in identifier).
   - Change xlat (nf_input) to translates solely based
     on matching locators not identifiers (since identifiers
     are not obfuscated by checksum neutral).
   - Side effect if above is that multiple ILA domains are
     supported. Each local locator can map to a different
     SIR address (ILA domain), and each domain defines its
     own identifier space.

Tested: Ran TCP_RR with 200 cnxs. ILA performance is slightly better
than previously since we are not longer parsing L4 for checksum
handling. I amd seeing about 1% performance overhead. Also ran
TCP_STREAM and tested non-ILA address (type=0) are not translated.

v2: Fix compilation errors
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Support checksum neutral ILA as described in the ILA draft. The low
order 16 bits of the identifier are used to contain the checksum
adjustment value.

The csum-mode parameter is added to described checksum processing. There
are three values:
 - adjust transport checksum (previous behavior)
 - do checksum neutral mapping
 - do nothing

On output the csum-mode in the ila_params is checked and acted on. If
mode is checksum neutral mapping then to mapping and set C-bit.

On input, C-bit is checked. If it is set checksum-netural mapping is
done (regardless of csum-mode in ila params) and C-bit will be cleared.
If it is not set then action in csum-mode is taken.
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change model of xlat to be used only for input where lookup is done on
the locator part of an address (comparing to locator_match as key
in rhashtable). This is needed for checksum neutral translation
which obfuscates the low order 16 bits of the identifier. It also
permits hosts to be in muliple ILA domains (each locator can map
to a different SIR address). A check is also added to disallow
translating non-ILA addresses (check of type in identifier).
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add structures for identifiers, locators, and an ila address which
is composed of a locator and identifier and in6_addr can be cast to
it. This includes a three bit type field and enums for the types defined
in ILA I-D.

In ILA lwt don't allow user to set a translation for a non-ILA
address (type of identifier is zero meaning it is an IID). This also
requires that the destination prefix is at least 65 bytes (64
bit locator and first byte of identifier).
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The first argument of pci_free_consistent has type struct pci_dev *, so use
NULL instead of 0.

The semantic patch that performs this transformation is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
@@
pci_free_consistent(
- 0
+ NULL
  , ...)
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Yisen Zhuang says:

====================
net: hns: add support of debug dsaf device

There are two kinds of dsaf device in hns, one is for service ports,
contains crossbar in it, can work under different mode. Another is for
debug port, only can work under single port mode. The current code only
declares a dsaf device for both service ports and debug ports.It is not so
readability. This patch separates it to three platform devices to make the
code more simple and readability.

The diagram of all port in one platform device(old):
                                        CPU
                                         |
                                         |        DSAF(one platform device)
    --------------------------------------------------------------      /
    |                           |                  |      |      |     /
    |                          PPE                PPE    PPE     |    /
    |                           |                  |      |      |   /
    |                           |                  |      |      |  /
    |                        crossbar              |      |      | /
    |                           |                  |      |      |/
    |    -----------------------------------       |      |      |
    |    |      |      |      |      |      |      |      |      |
    |    |      |      |      |      |      |      |      |      |
    |   MAC    MAC    MAC    MAC    MAC    MAC    MAC    MAC     |
    |    |      |      |      |      |      |      |      |      |
    --------------------------------------------------------------
         |      |      |      |      |      |      |      |
        PHY    PHY    PHY    PHY    PHY    PHY    PHY    PHY

The diagram of separating ports to three platform(new):
                                                         CPU
                                                          |
                                    -----------------------------------
                                    |                     |           |
    ----------------------------------------------    ---------   ---------
    |                         |                  |    |       |   |   |   |
    |                        PPE                 |    |  PPE  |   |  PPE  |
    |                         |                  |    |   |   |   |   |   |
    |                         |                  |    |   |   |   |   |   |
    |                      crossbar              |    |   |   |   |   |   |
    |                         |                  |    |   |   |   |   |   |
    |   ----------------------------------       |    |   |   |   |   |   |
    |   |     |     |      |      |      |       |    |   |   |   |   |   |
    |   |     |     |      |      |      |       |    |   |   |   |   |   |
    |  MAC   MAC   MAC    MAC    MAC    MAC      |    |  MAC  |   |  MAC  |
    |   |     |     |      |      |      |       |    |   |   |   |   |   |
    ----------------------------------------------    ---------   ---------
        |     |     |      |      |      |    \        /  |        /  |
       PHY   PHY   PHY    PHY    PHY    PHY    \      /  PHY      /  PHY
                                                \    /           /
                                                 \  /           /
                                             DSAF(three platform device)

We take the compatibility into consideration, and it works well by using the
old dts file(tested on d02 board).

For more details, please see individual patches.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Because debug dsaf port was separated from service dsaf port, this patch
updates the related configurations of hns dts, changes it to match with
the new binding files. This also removes enet nodes which don't exist in
d02 board.
Signed-off-by: NYisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds description for port-idx-in-ae attribute.
Signed-off-by: NYisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Because debug dsaf port was separated from service dsaf port, this patch
updates the related information of DT binding.
Signed-off-by: NYisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Port mode offset for each dsaf port is different. The current code is not
so readability. This patch adds configuration named port-mode-offset to
make the code simple and more readability. If port-mode-offset isn't
exists, default value 0 will be used.
Signed-off-by: NDaode Huang <huangdaode@hisilicon.com>
Signed-off-by: NYisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The reset offset for each port in a dsaf is different. The current code is
not so readability. This patch adds configuration named port-rst-offset to
make the code simple and more readability. If this attribute doesn't exist,
default value of this attribute is equal to its port index.
Signed-off-by: NYisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds attribute cpld_ctrl for dsaf port node, parses the syscon
for mac_cb from dts, and changes the method of access the cpld related
registers through syscon.
Signed-off-by: NDaode Huang <huangdaode@hisilicon.com>
Signed-off-by: NYisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are two kinds of dsaf device in hns, one is for service ports,
contains crossbar in it, can work under different mode. Another is for
debug port, only can work under "single-port" mode. The current code only
declared a dsaf device for both service ports and debug ports. This patch
separate it to three platform devices.

Here is the diagram of all port in one platform device(old):
                                        CPU
                                         |
                                         |        DSAF(one platform device)
    --------------------------------------------------------------      /
    |                           |                  |      |      |     /
    |                          PPE                PPE    PPE     |    /
    |                           |                  |      |      |   /
    |                           |                  |      |      |  /
    |                        crossbar              |      |      | /
    |                           |                  |      |      |/
    |    -----------------------------------       |      |      |
    |    |      |      |      |      |      |      |      |      |
    |    |      |      |      |      |      |      |      |      |
    |   MAC    MAC    MAC    MAC    MAC    MAC    MAC    MAC     |
    |    |      |      |      |      |      |      |      |      |
    --------------------------------------------------------------
         |      |      |      |      |      |      |      |
        PHY    PHY    PHY    PHY    PHY    PHY    PHY    PHY

Here is the diagram of separate all ports to three platform(new):
                                                         CPU
                                                          |
                                    -----------------------------------
                                    |                     |           |
    ----------------------------------------------    ---------   ---------
    |                         |                  |    |       |   |   |   |
    |                        PPE                 |    |  PPE  |   |  PPE  |
    |                         |                  |    |   |   |   |   |   |
    |                         |                  |    |   |   |   |   |   |
    |                      crossbar              |    |   |   |   |   |   |
    |                         |                  |    |   |   |   |   |   |
    |   ----------------------------------       |    |   |   |   |   |   |
    |   |     |     |      |      |      |       |    |   |   |   |   |   |
    |   |     |     |      |      |      |       |    |   |   |   |   |   |
    |  MAC   MAC   MAC    MAC    MAC    MAC      |    |  MAC  |   |  MAC  |
    |   |     |     |      |      |      |       |    |   |   |   |   |   |
    ----------------------------------------------    ---------   ---------
        |     |     |      |      |      |    \        /  |        /  |
       PHY   PHY   PHY    PHY    PHY    PHY    \      /  PHY      /  PHY
                                                \    /           /
                                                 \  /           /
                                             DSAF(three platform device)
Signed-off-by: NDaode Huang <huangdaode@hisilicon.com>
Signed-off-by: NYisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch tunes the header file by the alphabetical order.
Signed-off-by: NDaode Huang <huangdaode@hisilicon.com>
Signed-off-by: NYisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch provides the read/write function for dsaf to
access the registers through syscon methods.
Signed-off-by: NDaode Huang <huangdaode@hisilicon.com>
Signed-off-by: NYisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add the subctrl reset offset for dsaf, this property is used to reset
xge/ge ports for different dsaf. If this attribute is not present,
default value 0 will be used.
Signed-off-by: NDaode Huang <huangdaode@hisilicon.com>
Signed-off-by: NYisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch parse port-idx-in-ae in enet node. In NIC mode of DSAF, all 6
PHYs of service DSAF are taken as ethernet ports to the CPU. The
port-idx-in-ae can be 0 to 5. Here is the diagram:
            +-----+---------------+
            |            CPU      |
            +-+-+-+---+-+-+-+-+-+-+
              |    |   | | | | | |
           debug debug   service
           port  port     port
           (0)   (0)     (0-5)

In Switch mode of DSAF, all 6 PHYs of service DSAF are taken as physical
ports connect to a LAN Switch while the CPU side assume itself have one
single NIC connect to this switch. In this case, the port-idx-in-ae will
be 0 only.
            +-----+-----+------+------+
            |                CPU      |
            +-+-+-+-+-+-+-+-+-+-+-+-+-+
              |    |     service| port(0)
            debug debug  +------------+
            port  port   |   switch   |
            (0)   (0)    +-+-+-+-+-+-++
                          | | | | | |
                         external port

when port-idx-in-ae is not exists, old attribute port-id will be used
(only for compatible purpose, not recommended to use port-id in new code).
Signed-off-by: NDaode Huang <huangdaode@hisilicon.com>
Signed-off-by: NYisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As debug ports are moved from service dsaf to debug dsaf,
the interrupts offset should start from 0, So this patch
re-defines the offset index of debug ports.
Signed-off-by: NDaode Huang <huangdaode@hisilicon.com>
Signed-off-by: NYisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a new dsaf mode named "single-port" mode for debug port.
This mode only contains one debug port. This patch also changes the
method of distinguishing the port type.
Signed-off-by: NDaode Huang <huangdaode@hisilicon.com>
Signed-off-by: NYisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>