sysctl_tcp_mem() initialization was moved to sysctl_tcp_ipv4.c
in commit 3dc43e3e, since it
became a per-ns value.

That code, however, will never run when CONFIG_SYSCTL is
disabled, leading to bogus values on those fields - causing hung
TCP sockets.

This patch fixes it by keeping an initialization code in
tcp_init(). It will be overwritten by the first net namespace
init if CONFIG_SYSCTL is compiled in, and do the right thing if
it is compiled out.

It is also named properly as tcp_init_mem(), to properly signal
its non-sysctl side effect on TCP limits.
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NGlauber Costa <glommer@parallels.com>
Cc: David S. Miller <davem@davemloft.net>
Link: http://lkml.kernel.org/r/4F22D05A.8030604@parallels.com
[ renamed the function, tidied up the changelog a bit ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch allows each namespace to independently set up
its levels for tcp memory pressure thresholds. This patch
alone does not buy much: we need to make this values
per group of process somehow. This is achieved in the
patches that follows in this patchset.
Signed-off-by: NGlauber Costa <glommer@parallels.com>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
CC: David S. Miller <davem@davemloft.net>
CC: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As mentioned by Joe Perches, TCP_OFF() and TCP_PAGE() macros are
useless.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If our TCP_PAGE(sk) is not shared (page_count() == 1), we can set page
offset to 0.

This permits better filling of the pages on small to medium tcp writes.

"tbench 16" results on my dev server (2x4x2 machine) :

Before : 3072 MB/s
After  : 3146 MB/s  (2.4 % gain)
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcp_sendmsg() uses select_size() helper to choose skb head size when a
new skb must be allocated.

If GSO is enabled for the socket, current strategy is to force all
payload data to be outside of headroom, in PAGE fragments.

This strategy is not welcome for small packets, wasting memory.

Experiments show that best results are obtained when using 2048 bytes
for skb head (This includes the skb overhead and various headers)

This patch provides better len/truesize ratios for packets sent to
loopback device, and reduce memory needs for in-flight loopback packets,
particularly on arches with big pages.

If a sender sends many 1-byte packets to an unresponsive application,
receiver rmem_alloc will grow faster and will stop queuing these packets
sooner, or will collapse its receive queue to free excess memory.

netperf -t TCP_RR results are improved by ~4 %, and many workloads are
improved as well (tbench, mysql...)
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now sk_route_caps is u64, its dangerous to use an integer to store
result of an AND operator. It wont work if NETIF_F_SG is moved on the
upper part of u64.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
CC: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

v2:	add couple missing conversions in drivers
	split unexporting netdev_fix_features()
	implemented %pNF
	convert sock::sk_route_(no?)caps
Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It was enabled by default and the messages guarded
by the define are useful.
Signed-off-by: NFlavio Leitner <fbl@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcp_md5_hash_header() writes into skb header a temporary zero value,
this might confuse other users of this area.

Since tcphdr is small (20 bytes), copy it in a temporary variable and
make the change in the copy.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adding const qualifiers to pointers can ease code review, and spot some
bugs. It might allow compiler to optimize code further.

For example, is it legal to temporary write a null cksum into tcphdr
in tcp_md5_hash_header() ? I am afraid a sniffer could catch the
temporary null value...
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To ease skb->truesize sanitization, its better to be able to localize
all references to skb frags size.

Define accessors : skb_frag_size() to fetch frag size, and
skb_frag_size_{set|add|sub}() to manipulate it.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allows ss command (iproute2) to display "ecnseen" if at least one packet
with ECT(0) or ECT(1) or ECN was received by this socket.

"ecn" means ECN was negotiated at session establishment (TCP level)

"ecnseen" means we received at least one packet with ECT fields set (IP
level)

ss -i
...
ESTAB      0      0   192.168.20.110:22  192.168.20.144:38016
ino:5950 sk:f178e400
	 mem:(r0,w0,f0,t0) ts sack ecn ecnseen bic wscale:7,8 rto:210
rtt:12.5/7.5 cwnd:10 send 9.3Mbps rcv_space:14480
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rename struct tcp_skb_cb "flags" to "tcp_flags" to ease code review and
maintenance.

Its content is a combination of FIN/SYN/RST/PSH/ACK/URG/ECE/CWR flags
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcp_md5sig_pool is currently an 'array' (a percpu object) of pointers to
struct tcp_md5sig_pool. Only the pointers are NUMA aware, but objects
themselves are all allocated on a single node.

Remove this extra indirection to get proper percpu memory (NUMA aware)
and make code simpler.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: "Pekka Savola (ipv6)" <pekkas@netcore.fi>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: netdev@vger.kernel.org
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Current tcp/udp/sctp global memory limits are not taking into account
hugepages allocations, and allow 50% of ram to be used by buffers of a
single protocol [ not counting space used by sockets / inodes ...]

Lets use nr_free_buffer_pages() and allow a default of 1/8 of kernel ram
per protocol, and a minimum of 128 pages.
Heavy duty machines sysadmins probably need to tweak limits anyway.


References: https://bugzilla.stlinux.com/show_bug.cgi?id=38032Reported-by: Nstarlight <starlight@binnacle.cx>
Suggested-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch uses __copy_from_user_nocache on transmit to bypass data
cache for a performance improvement.  skb_add_data_nocache and
skb_copy_to_page_nocache can be called by sendmsg functions to use
this feature, initial support is in tcp_sendmsg.  This functionality is
configurable per device using ethtool.

Presumably, this feature would only be useful when the driver does
not touch the data.  The feature is turned on by default if a device
indicates that it does some form of checksum offload; it is off by
default for devices that do no checksum offload or indicate no checksum
is necessary.  For the former case copy-checksum is probably done
anyway, in the latter case the device is likely loopback in which case
the no cache copy is probably not beneficial.

This patch was tested using 200 instances of netperf TCP_RR with
1400 byte request and one byte reply.  Platform is 16 core AMD x86.

No-cache copy disabled:
   672703 tps, 97.13% utilization
   50/90/99% latency:244.31 484.205 1028.41

No-cache copy enabled:
   702113 tps, 96.16% utilization,
   50/90/99% latency 238.56 467.56 956.955

Using 14000 byte request and response sizes demonstrate the
effects more dramatically:

No-cache copy disabled:
   79571 tps, 34.34 %utlization
   50/90/95% latency 1584.46 2319.59 5001.76

No-cache copy enabled:
   83856 tps, 34.81% utilization
   50/90/95% latency 2508.42 2622.62 2735.88

Note especially the effect on latency tail (95th percentile).

This seems to provide a nice performance improvement and is
consistent in the tests I ran.  Presumably, this would provide
the greatest benfits in the presence of an application workload
stressing the cache and a lot of transmit data happening.
Signed-off-by: NTom Herbert <therbert@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In contrast to SIOCOUTQ which returns the amount of data sent
but not yet acknowledged plus data not yet sent this patch only
returns the data not sent.

For various methods of live streaming bitrate control it may
be helpful to know how much data are in the tcp outqueue are
not sent yet.
Signed-off-by: NMario Schuknecht <m.schuknecht@dresearch.de>
Signed-off-by: NSteffen Sledz <sledz@dresearch.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now, TCP_CHECK_TIMER is not used for debuging, it does nothing.
And, it has been there for several years, maybe 6 years.

Remove it to keep code clearer.
Signed-off-by: NShan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Quoting Ben Hutchings: we presumably won't be defining features that
can only be enabled on 64-bit architectures.

Occurences found by `grep -r` on net/, drivers/net, include/

[ Move features and vlan_features next to each other in
  struct netdev, as per Eric Dumazet's suggestion -DaveM ]
Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use TCP_MIN_MSS instead of constant 64.
Reported-by: NMin Zhang <mzhang@mvista.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As noted by Steve Chen, since commit
f5fff5dc ("tcp: advertise MSS
requested by user") we can end up with a situation where
tcp_select_initial_window() does a divide by a zero (or
even negative) mss value.

The problem is that sometimes we effectively subtract
TCPOLEN_TSTAMP_ALIGNED and/or TCPOLEN_MD5SIG_ALIGNED from the mss.

Fix this by increasing the minimum from 8 to 64.
Reported-by: NSteve Chen <schen@mvista.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Robin Holt tried to boot a 16TB machine and found some limits were
reached : sysctl_tcp_mem[2], sysctl_udp_mem[2]

We can switch infrastructure to use long "instead" of "int", now
atomic_long_t primitives are available for free.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Reported-by: NRobin Holt <holt@sgi.com>
Reviewed-by: NRobin Holt <holt@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Coalesce long formats.
Align arguments.
Remove KERN_<level>.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes kernel bugzilla #16603

tcp_sendmsg() truncates iov_len to an 'int' which a 4GB write to write
zero bytes, for example.

There is also the problem higher up of how verify_iovec() works.  It
wants to prevent the total length from looking like an error return
value.

However it does this using 'int', but syscalls return 'long' (and
thus signed 64-bit on 64-bit machines).  So it could trigger
false-positives on 64-bit as written.  So fix it to use 'long'.
Reported-by: NOlaf Bonorden <bono@onlinehome.de>
Reported-by: NDaniel Büse <dbuese@gmx.de>
Reported-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If a RST comes in immediately after checking sk->sk_err, tcp_poll will
return POLLIN but not POLLOUT.  Fix this by checking sk->sk_err at the end
of tcp_poll.  Additionally, ensure the correct order of operations on SMP
machines with memory barriers.
Signed-off-by: NTom Marshall <tdm.code@gmail.com>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch provides a "user timeout" support as described in RFC793. The
socket option is also needed for the the local half of RFC5482 "TCP User
Timeout Option".

TCP_USER_TIMEOUT is a TCP level socket option that takes an unsigned int,
when > 0, to specify the maximum amount of time in ms that transmitted
data may remain unacknowledged before TCP will forcefully close the
corresponding connection and return ETIMEDOUT to the application. If
0 is given, TCP will continue to use the system default.

Increasing the user timeouts allows a TCP connection to survive extended
periods without end-to-end connectivity. Decreasing the user timeouts
allows applications to "fail fast" if so desired. Otherwise it may take
upto 20 minutes with the current system defaults in a normal WAN
environment.

The socket option can be made during any state of a TCP connection, but
is only effective during the synchronized states of a connection
(ESTABLISHED, FIN-WAIT-1, FIN-WAIT-2, CLOSE-WAIT, CLOSING, or LAST-ACK).
Moreover, when used with the TCP keepalive (SO_KEEPALIVE) option,
TCP_USER_TIMEOUT will overtake keepalive to determine when to close a
connection due to keepalive failure.

The option does not change in anyway when TCP retransmits a packet, nor
when a keepalive probe will be sent.

This option, like many others, will be inherited by an acceptor from its
listener.
Signed-off-by: NH.K. Jerry Chu <hkchu@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This issue come from ruby language community. Below test program
hang up when only run on Linux.

	% uname -mrsv
	Linux 2.6.26-2-486 #1 Sat Dec 26 08:37:39 UTC 2009 i686
	% ruby -rsocket -ve '
	BasicSocket.do_not_reverse_lookup = true
	serv = TCPServer.open("127.0.0.1", 0)
	s1 = TCPSocket.open("127.0.0.1", serv.addr[1])
	s2 = serv.accept
	s2.close
	s1.write("a") rescue p $!
	s1.write("a") rescue p $!
	Thread.new {
	  s1.write("a")
	}.join'
	ruby 1.9.3dev (2010-07-06 trunk 28554) [i686-linux]
	#<Errno::EPIPE: Broken pipe>
	[Hang Here]

FreeBSD, Solaris, Mac doesn't. because Ruby's write() method call
select() internally. and tcp_poll has a bug.

SUS defined 'ready for writing' of select() as following.

|  A descriptor shall be considered ready for writing when a call to an output
|  function with O_NONBLOCK clear would not block, whether or not the function
|  would transfer data successfully.

That said, EPIPE situation is clearly one of 'ready for writing'.

We don't have read-side issue because tcp_poll() already has read side
shutdown care.

|        if (sk->sk_shutdown & RCV_SHUTDOWN)
|                mask |= POLLIN | POLLRDNORM | POLLRDHUP;

So, Let's insert same logic in write side.

- reference url
  http://blade.nagaokaut.ac.jp/cgi-bin/scat.rb/ruby/ruby-core/31065
  http://blade.nagaokaut.ac.jp/cgi-bin/scat.rb/ruby/ruby-core/31068Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As discovered by Anton Blanchard, current code to autotune 
tcp_death_row.sysctl_max_tw_buckets, sysctl_tcp_max_orphans and
sysctl_max_syn_backlog makes little sense.

The bigger a page is, the less tcp_max_orphans is : 4096 on a 512GB
machine in Anton's case.

(tcp_hashinfo.bhash_size * sizeof(struct inet_bind_hashbucket))
is much bigger if spinlock debugging is on. Its wrong to select bigger
limits in this case (where kernel structures are also bigger)

bhash_size max is 65536, and we get this value even for small machines. 

A better ground is to use size of ehash table, this also makes code
shorter and more obvious.

Based on a patch from Anton, and another from David.
Reported-and-tested-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As reported by Anton Blanchard when we use
percpu_counter_read_positive() to make our orphan socket limit checks,
the check can be off by up to num_cpus_online() * batch (which is 32
by default) which on a 128 cpu machine can be as large as the default
orphan limit itself.

Fix this by doing the full expensive sum check if the optimized check
triggers.
Reported-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NEric Dumazet <eric.dumazet@gmail.com>

Initial TCP thin-stream commit did not add getsockopt support for the new
socket options: TCP_THIN_LINEAR_TIMEOUTS and TCP_THIN_DUPACK. This adds support
for them.
Signed-off-by: NJosh Hunt <johunt@akamai.com>
Tested-by: NAndreas Petlund <apetlund@simula.no>
Acked-by: NAndreas Petlund <apetlund@simula.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is a bug in do_tcp_setsockopt(net/ipv4/tcp.c),
TCP_COOKIE_TRANSACTIONS case.
In some cases (when tp->cookie_values == NULL) new tcp_cookie_values
structure can be allocated (at cvp), but not bound to
tp->cookie_values. So a memory leak occurs.
Signed-off-by: NDmitry Popov <dp@highloadlab.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

rfs: call sock_rps_record_flow() in tcp_splice_read()

call sock_rps_record_flow() in tcp_splice_read(), so the applications using
splice(2) or sendfile(2) can utilize RFS.
Signed-off-by: NChangli Gao <xiaosuo@gmail.com>
----
 net/ipv4/tcp.c |    1 +
 1 file changed, 1 insertion(+)
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

a new boolean flag no_autobind is added to structure proto to avoid the autobind
calls when the protocol is TCP. Then sock_rps_record_flow() is called int the
TCP's sendmsg() and sendpage() pathes.
Signed-off-by: NChangli Gao <xiaosuo@gmail.com>
----
 include/net/inet_common.h |    4 ++++
 include/net/sock.h        |    1 +
 include/net/tcp.h         |    8 ++++----
 net/ipv4/af_inet.c        |   15 +++++++++------
 net/ipv4/tcp.c            |   11 +++++------
 net/ipv4/tcp_ipv4.c       |    3 +++
 net/ipv6/af_inet6.c       |    8 ++++----
 net/ipv6/tcp_ipv6.c       |    3 +++
 8 files changed, 33 insertions(+), 20 deletions(-)
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

CodingStyle cleanups

EXPORT_SYMBOL should immediately follow the symbol declaration.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

use this_cpu_ptr(p) instead of per_cpu_ptr(p, smp_processor_id())
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

i've found that tcp_close() can be called for an already closed
socket, but still sends reset in this case (tcp_send_active_reset())
which seems to be incorrect.  Moreover, a packet with reset is sent
with different source port as original port number has been already
cleared on socket.  Besides that incrementing stat counter for
LINUX_MIB_TCPABORTONCLOSE also does not look correct in this case.

Initially this issue was found on 2.6.18-x RHEL5 kernel, but the same
seems to be true for the current mainstream kernel (checked on
2.6.35-rc3).  Please, correct me if i missed something.

How that happens:

1) the server receives a packet for socket in TCP_CLOSE_WAIT state
   that triggers a tcp_reset():

Call Trace:
 <IRQ>  [<ffffffff8025b9b9>] tcp_reset+0x12f/0x1e8
 [<ffffffff80046125>] tcp_rcv_state_process+0x1c0/0xa08
 [<ffffffff8003eb22>] tcp_v4_do_rcv+0x310/0x37a
 [<ffffffff80028bea>] tcp_v4_rcv+0x74d/0xb43
 [<ffffffff8024ef4c>] ip_local_deliver_finish+0x0/0x259
 [<ffffffff80037131>] ip_local_deliver+0x200/0x2f4
 [<ffffffff8003843c>] ip_rcv+0x64c/0x69f
 [<ffffffff80021d89>] netif_receive_skb+0x4c4/0x4fa
 [<ffffffff80032eca>] process_backlog+0x90/0xec
 [<ffffffff8000cc50>] net_rx_action+0xbb/0x1f1
 [<ffffffff80012d3a>] __do_softirq+0xf5/0x1ce
 [<ffffffff8001147a>] handle_IRQ_event+0x56/0xb0
 [<ffffffff8006334c>] call_softirq+0x1c/0x28
 [<ffffffff80070476>] do_softirq+0x2c/0x85
 [<ffffffff80070441>] do_IRQ+0x149/0x152
 [<ffffffff80062665>] ret_from_intr+0x0/0xa
 <EOI>  [<ffffffff80008a2e>] __handle_mm_fault+0x6cd/0x1303
 [<ffffffff80008903>] __handle_mm_fault+0x5a2/0x1303
 [<ffffffff80033a9d>] cache_free_debugcheck+0x21f/0x22e
 [<ffffffff8006a263>] do_page_fault+0x49a/0x7dc
 [<ffffffff80066487>] thread_return+0x89/0x174
 [<ffffffff800c5aee>] audit_syscall_exit+0x341/0x35c
 [<ffffffff80062e39>] error_exit+0x0/0x84

tcp_rcv_state_process()
...  // (sk_state == TCP_CLOSE_WAIT here)
...
        /* step 2: check RST bit */
        if(th->rst) {
                tcp_reset(sk);
                goto discard;
        }
...
---------------------------------
tcp_rcv_state_process
 tcp_reset
  tcp_done
   tcp_set_state(sk, TCP_CLOSE);
     inet_put_port
      __inet_put_port
       inet_sk(sk)->num = 0;

   sk->sk_shutdown = SHUTDOWN_MASK;

2) After that the process (socket owner) tries to write something to
   that socket and "inet_autobind" sets a _new_ (which differs from
   the original!) port number for the socket:

 Call Trace:
  [<ffffffff80255a12>] inet_bind_hash+0x33/0x5f
  [<ffffffff80257180>] inet_csk_get_port+0x216/0x268
  [<ffffffff8026bcc9>] inet_autobind+0x22/0x8f
  [<ffffffff80049140>] inet_sendmsg+0x27/0x57
  [<ffffffff8003a9d9>] do_sock_write+0xae/0xea
  [<ffffffff80226ac7>] sock_writev+0xdc/0xf6
  [<ffffffff800680c7>] _spin_lock_irqsave+0x9/0xe
  [<ffffffff8001fb49>] __pollwait+0x0/0xdd
  [<ffffffff8008d533>] default_wake_function+0x0/0xe
  [<ffffffff800a4f10>] autoremove_wake_function+0x0/0x2e
  [<ffffffff800f0b49>] do_readv_writev+0x163/0x274
  [<ffffffff80066538>] thread_return+0x13a/0x174
  [<ffffffff800145d8>] tcp_poll+0x0/0x1c9
  [<ffffffff800c56d3>] audit_syscall_entry+0x180/0x1b3
  [<ffffffff800f0dd0>] sys_writev+0x49/0xe4
  [<ffffffff800622dd>] tracesys+0xd5/0xe0

3) sendmsg fails at last with -EPIPE (=> 'write' returns -EPIPE in userspace):

F: tcp_sendmsg1 -EPIPE: sk=ffff81000bda00d0, sport=49847, old_state=7, new_state=7, sk_err=0, sk_shutdown=3

Call Trace:
 [<ffffffff80027557>] tcp_sendmsg+0xcb/0xe87
 [<ffffffff80033300>] release_sock+0x10/0xae
 [<ffffffff8016f20f>] vgacon_cursor+0x0/0x1a7
 [<ffffffff8026bd32>] inet_autobind+0x8b/0x8f
 [<ffffffff8003a9d9>] do_sock_write+0xae/0xea
 [<ffffffff80226ac7>] sock_writev+0xdc/0xf6
 [<ffffffff800680c7>] _spin_lock_irqsave+0x9/0xe
 [<ffffffff8001fb49>] __pollwait+0x0/0xdd
 [<ffffffff8008d533>] default_wake_function+0x0/0xe
 [<ffffffff800a4f10>] autoremove_wake_function+0x0/0x2e
 [<ffffffff800f0b49>] do_readv_writev+0x163/0x274
 [<ffffffff80066538>] thread_return+0x13a/0x174
 [<ffffffff800145d8>] tcp_poll+0x0/0x1c9
 [<ffffffff800c56d3>] audit_syscall_entry+0x180/0x1b3
 [<ffffffff800f0dd0>] sys_writev+0x49/0xe4
 [<ffffffff800622dd>] tracesys+0xd5/0xe0

tcp_sendmsg()
...
        /* Wait for a connection to finish. */
        if ((1 << sk->sk_state) & ~(TCPF_ESTABLISHED | TCPF_CLOSE_WAIT)) {
                int old_state = sk->sk_state;
                if ((err = sk_stream_wait_connect(sk, &timeo)) != 0) {
if (f_d && (err == -EPIPE)) {
        printk("F: tcp_sendmsg1 -EPIPE: sk=%p, sport=%u, old_state=%d, new_state=%d, "
                "sk_err=%d, sk_shutdown=%d\n",
                sk, ntohs(inet_sk(sk)->sport), old_state, sk->sk_state,
                sk->sk_err, sk->sk_shutdown);
        dump_stack();
}
                        goto out_err;
                }
        }
...

4) Then the process (socket owner) understands that it's time to close
   that socket and does that (and thus triggers sending reset packet):

Call Trace:
...
 [<ffffffff80032077>] dev_queue_xmit+0x343/0x3d6
 [<ffffffff80034698>] ip_output+0x351/0x384
 [<ffffffff80251ae9>] dst_output+0x0/0xe
 [<ffffffff80036ec6>] ip_queue_xmit+0x567/0x5d2
 [<ffffffff80095700>] vprintk+0x21/0x33
 [<ffffffff800070f0>] check_poison_obj+0x2e/0x206
 [<ffffffff80013587>] poison_obj+0x36/0x45
 [<ffffffff8025dea6>] tcp_send_active_reset+0x15/0x14d
 [<ffffffff80023481>] dbg_redzone1+0x1c/0x25
 [<ffffffff8025dea6>] tcp_send_active_reset+0x15/0x14d
 [<ffffffff8000ca94>] cache_alloc_debugcheck_after+0x189/0x1c8
 [<ffffffff80023405>] tcp_transmit_skb+0x764/0x786
 [<ffffffff8025df8a>] tcp_send_active_reset+0xf9/0x14d
 [<ffffffff80258ff1>] tcp_close+0x39a/0x960
 [<ffffffff8026be12>] inet_release+0x69/0x80
 [<ffffffff80059b31>] sock_release+0x4f/0xcf
 [<ffffffff80059d4c>] sock_close+0x2c/0x30
 [<ffffffff800133c9>] __fput+0xac/0x197
 [<ffffffff800252bc>] filp_close+0x59/0x61
 [<ffffffff8001eff6>] sys_close+0x85/0xc7
 [<ffffffff800622dd>] tracesys+0xd5/0xe0

So, in brief:

* a received packet for socket in TCP_CLOSE_WAIT state triggers
  tcp_reset() which clears inet_sk(sk)->num and put socket into
  TCP_CLOSE state

* an attempt to write to that socket forces inet_autobind() to get a
  new port (but the write itself fails with -EPIPE)

* tcp_close() called for socket in TCP_CLOSE state sends an active
  reset via socket with newly allocated port

This adds an additional check in tcp_close() for already closed
sockets. We do not want to send anything to closed sockets.
Signed-off-by: NKonstantin Khorenko <khorenko@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

unify tcp flag macros: TCPHDR_FIN, TCPHDR_SYN, TCPHDR_RST, TCPHDR_PSH,
TCPHDR_ACK, TCPHDR_URG, TCPHDR_ECE and TCPHDR_CWR. TCBCB_FLAG_* are replaced
with the corresponding TCPHDR_*.
Signed-off-by: NChangli Gao <xiaosuo@gmail.com>
----
 include/net/tcp.h                      |   24 ++++++-------
 net/ipv4/tcp.c                         |    8 ++--
 net/ipv4/tcp_input.c                   |    2 -
 net/ipv4/tcp_output.c                  |   59 ++++++++++++++++-----------------
 net/netfilter/nf_conntrack_proto_tcp.c |   32 ++++++-----------
 net/netfilter/xt_TCPMSS.c              |    4 --
 6 files changed, 58 insertions(+), 71 deletions(-)
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcp_md5_hash_skb_data() should handle skb->frag_list, and eventually
recurse.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Also added an explicit break; to avoid
a fallthrough in net/ipv4/tcp_input.c
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>