- 05 12月, 2007 26 次提交
-
-
由 Pavel Emelyanov 提交于
The register_ip_vs_scheduler() checks for the scheduler with the same name under the read-locked __ip_vs_sched_lock, then drops, takes it for writing and puts the scheduler in list. This is racy, since we can have a race window between the lock being re-locked for writing. The fix is to search the scheduler with the given name right under the write-locked __ip_vs_sched_lock. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Acked-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
In case we load lblc or lblcr module we can leak some sysctl tables if the call to register_ip_vs_scheduler() fails. I've looked at the register_ip_vs_scheduler() code and saw, that the only reason to fail is the name collision, so I think that with some 3rd party schedulers this becomes a relevant issue. No? Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Acked-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
* 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: PHY: Add the phy_device_release device method. gianfar: fix compile warning pasemi_mac: Fix reuse of free'd skb SMC911X: Fix using of dereferenced skb after netif_rx sky2: recovery deadlock fix Fix memory corruption in fec_mpc52xx Don't claim to do IPv6 checksum offload cxgb - revert file mode changes.
-
由 Anton Vorontsov 提交于
Lately I've got this nice badness on mdio bus removal: Device 'e0103120:06' does not have a release() function, it is broken and must be fixed. ------------[ cut here ]------------ Badness at drivers/base/core.c:107 NIP: c015c1a8 LR: c015c1a8 CTR: c0157488 REGS: c34bdcf0 TRAP: 0700 Not tainted (2.6.23-rc5-g9ebadfbb-dirty) MSR: 00029032 <EE,ME,IR,DR> CR: 24088422 XER: 00000000 ... [c34bdda0] [c015c1a8] device_release+0x78/0x80 (unreliable) [c34bddb0] [c01354cc] kobject_cleanup+0x80/0xbc [c34bddd0] [c01365f0] kref_put+0x54/0x6c [c34bdde0] [c013543c] kobject_put+0x24/0x34 [c34bddf0] [c015c384] put_device+0x1c/0x2c [c34bde00] [c0180e84] mdiobus_unregister+0x2c/0x58 ... Though actually there is nothing broken, it just device subsystem core expects another "pattern" of resource managment. This patch implement phy device's release function, thus we're getting rid of this badness. Also small hidden bug fixed, hope none other introduced. ;-) Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Acked-by: NAndy Fleming <afleming@freescale.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Grant Likely 提交于
Eliminate an uninitialized variable warning. The code is correct, but a pointer to the automatic variable 'addr' is passed to dma_alloc_coherent. Since addr has never been initialized, and the compiler doesn't know what dma_alloc_coherent will do with it, it complains. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Olof Johansson 提交于
Turns out we're freeing the skb when we detect CRC error, but we're not clearing out info->skb. We could either clear it and have the stack reallocate it, or just leave it and the rx ring refill code will reuse the one that was allocated. Reusing a freed skb obviously caused some nasty crashes of various kind, as reported by Brent Baude and David Woodhouse. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Wang Chen 提交于
Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
Prevent deadlock in sky2 recovery logic. sky2_down calls napi_synchronize which gets stuck if napi was already disabled. Fix by rearranging slightly and not calling napi_disable until after both ports are stopped. The napi_disable probably is being overly paranoid, but it is safe now. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jon Smirl 提交于
The mpc5200 fec driver is corrupting memory. This patch fixes two bugs where the wrong skb was being referenced. Signed-off-by: NJon Smirl <jonsmirl@gmail.com> Acked-by: NDomen Puncer <domen.puncer@telargo.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 David Woodhouse 提交于
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Divy Le Ray 提交于
revert inavertant file mode changes Signed-off-by: NDivy Le Ray <divy@chelsio.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
* Don't program UDMA timings when programming PIO or MWDMA modes. This has also a nice side-effect of fixing regression added by commit 681c80b5 ("libata: correct handling of SRST reset sequences") (->set_piomode method for PIO0 is called before ->cable_detect method which checks UDMA timings to get the cable type). * Bump driver version. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com> Tested-by: N"Thomas Lindroth" <thomas.lindroth@gmail.com> Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 peerchen 提交于
Add the device IDs of legacy mode of MCP79 AHCI controller to ahci.c Signed-off-by: NPeer Chen <peerchen@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Mark Lord 提交于
The Highpoint RocketRAID boards using Marvell 7042 chips overwrite the 9th sector of attached drives at boot time, when those drives are configured as "Legacy" (the default) in the HighPoint BIOS. This kills GRUB, and probably other stuff. But it all happens *before* Linux is even loaded. So, for now we'll log a WARNING when such boards are detected, and advise users to configure BIOS "JBOD" volumes instead, which don't appear to suffer from this problem. Signed-off-by: NMark Lord <mlord@pobox.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Robert Hancock 提交于
We need to run any DMA command with result taskfile requested in ADMA mode when the port is in ADMA mode, otherwise it may try to use the legacy DMA engine in ADMA mode which is not allowed. Enforce this with BUG_ON() since data corruption could potentially result if this happened. Also, fail any attempt to try and issue NCQ commands with result taskfile requested, since the hardware doesn't allow this. Signed-off-by: NRobert Hancock <hancockr@shaw.ca> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
git://git390.osdl.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] Make sure the restore psw masks are initialized. [S390] Fix compile error on 31bit without preemption [S390] dcssblk: prevent early access without own make_request function [S390] cio: add missing reprobe loop end statement [S390] cio: Issue SenseID per path.
-
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: x86: arch_register_cpu() section fix x86: free_cache_attributes() section fix x86: add the word 'WARNING' in check_nmi_watchdog() output x86: revert CONFIG_X86_HT semantics change
-
git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched: sched: default to more agressive yield for SCHED_BATCH tasks sched: fix crash in sys_sched_rr_get_interval()
-
由 Adrian Bunk 提交于
I haven't seen Richard doing MTRR related work for quite some time, and the "X86 ARCHITECTURE" entry in MAINTAINERS already covers the people currently responsible for this code. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ingo Molnar 提交于
SET_MODULE_OWNER() is obsolete. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
fix this on i386 allnoconfig: WARNING: vmlinux.o(.text+0x6f2e): Section mismatch: reference to .init.text:register_cpu (between 'arch_register_cpu' and 'text_poke') Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Adrian Bunk 提交于
free_cache_attributes() must be __cpuinit since it calls the __cpuinit cache_remove_shared_cpu_map(). This patch fixes the following section mismatch reported by Chris Clayton: ... WARNING: vmlinux.o(.text+0x90b6): Section mismatch: reference to .init.text:cache_remove_shared_cpu_map (between 'free_cache_attributes' and 'show_level') ... Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Don Zickus 提交于
Our automated test suite looks for keywords like error, fail, warning in the boot log. In the case when the nmi watchdog is determined to be stuck in check_nmi_watchdog(), none of those keywords are displayed. This patch adds a keyword, "WARNING:", so it makes it easier to notice when the nmi watchdog isn't working correctly. Also add a proper KERN_WARNING mark to this printout. Signed-off-by: NDon Zickus <dzickus@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Adrian Bunk 提交于
The recent Kconfig changes in x86 resulted in CONFIG_X86_HT no longer being set if (X86_32 && MK8). After grep'ing through the tree I think the problem is that different places have different assumptions about the semantics of CONFIG_X86_HT, either: - hyperthreading or - multicore This should be sorted out properly, but until then we should keep the 2.6.23 status quo. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
do more agressive yield for SCHED_BATCH tuned tasks: they are all about throughput anyway. This allows a gentler migration path for any apps that relied on stronger yield. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Luiz Fernando N. Capitulino reported that sched_rr_get_interval() crashes for SCHED_OTHER tasks that are on an idle runqueue. The fix is to return a 0 timeslice for tasks that are on an idle runqueue. (and which are not running, obviously) this also shrinks the code a bit: text data bss dec hex filename 47903 3934 336 52173 cbcd sched.o.before 47885 3934 336 52155 cbbb sched.o.after Reported-by: NLuiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 04 12月, 2007 14 次提交
-
-
由 Heiko Carstens 提交于
In case of TRACE_IRQFLAGS the restore psw masks will not be initialized if noexec is turned on. This will lead to an immediate system crash. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Christian Borntraeger 提交于
Commit b8e7a54c introduced a compile error if CONFIG_PREEMPT is not set: arch/s390/kernel/built-in.o: In function `cleanup_io_leave_insn': /space/kvm/arch/s390/kernel/entry.S:(.text+0xbfce): undefined reference to `preempt_schedule_irq' This patch hides preempt_schedule_irq if CONFIG_PREEMPT is not set. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Christian Borntraeger 提交于
When loading a dcss segment with the dcssblk driver, sometimes the following kind of message appears: bio too big device dcssblk0 (8 > 0) Buffer I/O error on device dcssblk0, logical block 172016 .. The fix is to move the disk registration after setting the make_request function, to avoid calls into generic_make_request for dcssblock without having the make_request function set up properly. Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Peter Oberparleiter 提交于
Add loop end statement to prevent looping over empty subchannel sets. Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
We may receive a unit check for every path when we issue a SenseID. Unfortunately, the channel subsystem will try on a different path every time if we use a lpm of 0xff, which will exhaust our retry counter. Therefore, revert SenseID to its previous per-path behaviour and just leave out the suspend multipath reconnect. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.24由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.24: sh: Support PCI IO access of SH7780 base boards. sh: Fix PCI IO space base address of SH7780.
-
由 Ralf Baechle 提交于
The old code did did only work as long as CFE and the kernel were using the same interrupt numbering ... Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: x86: fix x86-32 early fixmap initialization. x86: disable hpet legacy replacement for kdump x86: disable hpet on shutdown
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Remove xmon from ml300 and ml403 defconfig in arch/ppc Revert "[POWERPC] Fix RTAS os-term usage on kernel panic"
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPICA: fix acpi-cpufreq boot crash due to _PSD return-by-reference ACPI: Delete the IRQ operation in throttling controll via PTC
-
git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched: sched: cpu accounting controller (V2)
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] NCR5380: Fix bugs and canonicalize irq handler usage [SCSI] zfcp: fix cleanup of dismissed error recovery actions [SCSI] zfcp: fix dismissal of error recovery actions [SCSI] qla1280: convert to use the data buffer accessors [SCSI] iscsi: return data transfer residual for data-out commands [SCSI] iscsi_tcp: fix potential lockup with write commands [SCSI] aacraid: fix security weakness [SCSI] aacraid: fix up le32 issues in BlinkLED [SCSI] aacraid: fix potential panic in thread stop [SCSI] aacraid: don't assign cpu_to_le32(constant) to u8
-
由 Eric W. Biederman 提交于
pageexec@freemail.hu writes: > i've just noticed that the chunk in i386/kernel/head.S ended up in a > weird place, namely, it's not going to be executed as it's just after > a 'jmp 3f' and before startup_32_smp, probably not what you intended. > on a sidenote, the whole thing can be done in a single insn, like: > > movl $(swapper_pg_pmd - __PAGE_OFFSET + 0x067), (swapper_pg_dir - > __PAGE_OFFSET+ 4092) Thanks for the reminder I thought we had fixed this problem a while ago. Needed to get fixed virtual address for USB debug and earlycon with mmio. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-