- 21 1月, 2011 29 次提交
-
-
由 Pavan Savoy 提交于
point the new v7 driver to build if ST_BT is selected in Makefile and delete the old bt_drv driver. Signed-off-by: NPavan Savoy <pavan_savoy@ti.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Pavan Savoy 提交于
Add the btwilink driver which has undergone 7 revisions of review. Based on bluetooth maintainer comments, since there might be some re-work needed on underlying ST driver, park the driver here. Signed-off-by: NPavan Savoy <pavan_savoy@ti.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Christopher Brannon 提交于
We still leaked many resources when Speakup failed to initialize. Examples of leaked resources include: /dev/synth, keyboard or VT notifiers, and heap-allocated st_spk_t structs. This is fixed. * We now use PTR_ERR to detect kthread_create failure (thank you Dan Carpenter). * The loop which frees members of the speakup_console array now iterates over the whole array, not stopping at the first NULL value. Fixes a possible memory leak. Safe because kfree(NULL) is a no-op. * The order of some initializations was changed. The safe ones, which will never fail, are performed first. Signed-off-by: NChristopher Brannon <chris@the-brannons.com> Acked-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Joe Perches 提交于
kzalloc'd memory doesn't need a memset to 0. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Justin P. Mattock 提交于
The patch below removes WAKE_LOCK since it is no longer in the kernel. Please let me know, if this is the proper way of doing this and/or more needs to be done.. Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Justin P. Mattock 提交于
The patch below removes CONFIG_HAS_WAKELOCK since it is no longer in the kernel. Please let me know, if this is the proper way of doing this and/or more needs to be done.. Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Justin P. Mattock 提交于
Note:not sure if there is already something like this submitted or not. The first two patches removes CONFIG_HAS_WAKELOCK since it is no longer in the kernel. Please let me know, if this is the proper way of doing this and/or more needs to be done.. Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Roland Vossen 提交于
Code cleanup. Replaced broadcom specific type by Linux counterpart. Reviewed-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NRoland Vossen <rvossen@broadcom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Roland Vossen 提交于
Code cleanup. This struct did nothing useful in the code. Instances of this struct and the code that read them were removed as well. Reviewed-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NRoland Vossen <rvossen@broadcom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Roland Vossen 提交于
Code cleanup. Cleaned up 802.11 type and subtype related macros by using Linux defines instead of Broadcom defined ones. Reviewed-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NRoland Vossen <rvossen@broadcom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Roland Vossen 提交于
Code cleanup. Reviewed-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NRoland Vossen <rvossen@broadcom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Roland Vossen 提交于
Code cleanup. Reviewed-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NRoland Vossen <rvossen@broadcom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Roland Vossen 提交于
Code cleanup. Reviewed-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NRoland Vossen <rvossen@broadcom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Roland Vossen 提交于
Code cleanup. Replaced Broadcom specific structure by its Linux equivalent. Reviewed-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NRoland Vossen <rvossen@broadcom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Roland Vossen 提交于
Code cleanup. Replacing Broadcom specific definitions with Linux counterpart. Not tested yet. Reviewed-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NRoland Vossen <rvossen@broadcom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Roland Vossen 提交于
Code cleanup related. Replaced broadcom specific function with Linux function ieee80211_dsss_chan_to_freq(). Reviewed-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NRoland Vossen <rvossen@broadcom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Roland Vossen 提交于
2.4 Ghz code cleanup related. Replaced broadcom specific function with Linux function ieee80211_dsss_chan_to_freq(). Reviewed-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NRoland Vossen <rvossen@broadcom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Arend van Spriel 提交于
cleaned up last artifacts used from proto/ethernet.h and subsequently the file can be removed. Reviewed-by: NBrett Rudley <brudley@broadcom.com> Reviewed-by: NHenry Ptasinski <henryp@broadcom.com> Reviewed-by: NRoland Vossen <rvossen@broadcom.com> Reviewed-by: NDowan Kim <dowan@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Arend van Spriel 提交于
Removed include construction used to solve compiler differences related to packed structure types. Now GNUC variant of packed structure is used explicitly. Reviewed-by: NBrett Rudley <brudley@broadcom.com> Reviewed-by: NHenry Ptasinski <henryp@broadcom.com> Reviewed-by: NRoland Vossen <rvossen@broadcom.com> Reviewed-by: NDowan Kim <dowan@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Arend van Spriel 提交于
Definitions used either had linux equivalent or were only used in one source file. Changes were made accordingly and proto/wpa.h has been removed from the driver sources. Reviewed-by: NBrett Rudley <brudley@broadcom.com> Reviewed-by: NHenry Ptasinski <henryp@broadcom.com> Reviewed-by: NRoland Vossen <rvossen@broadcom.com> Reviewed-by: NDowan Kim <dowan@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Arend van Spriel 提交于
Most definitions have been removed. Last definitions and the file itself are going to be removed in a later stage. Reviewed-by: NBrett Rudley <brudley@broadcom.com> Reviewed-by: NHenry Ptasinski <henryp@broadcom.com> Reviewed-by: NRoland Vossen <rvossen@broadcom.com> Reviewed-by: NDowan Kim <dowan@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Arend van Spriel 提交于
In linux the is already a structure defined for the ethernet header. Code now uses struct ethhdr instead. Reviewed-by: NBrett Rudley <brudley@broadcom.com> Reviewed-by: NHenry Ptasinski <henryp@broadcom.com> Reviewed-by: NRoland Vossen <rvossen@broadcom.com> Reviewed-by: NDowan Kim <dowan@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Arend van Spriel 提交于
The ethertype BRCM is used in single source file and consequently move there. Reviewed-by: NBrett Rudley <brudley@broadcom.com> Reviewed-by: NHenry Ptasinski <henryp@broadcom.com> Reviewed-by: NRoland Vossen <rvossen@broadcom.com> Reviewed-by: NDowan Kim <dowan@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Arend van Spriel 提交于
The linux include file if_ether.h already provides a definition ETH_FRAME_LEN although this is excluding checksum. So code uses ETH_FRAME_LEN+ETH_FCS_LEN now. Reviewed-by: NBrett Rudley <brudley@broadcom.com> Reviewed-by: NHenry Ptasinski <henryp@broadcom.com> Reviewed-by: NRoland Vossen <rvossen@broadcom.com> Reviewed-by: NDowan Kim <dowan@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Uwe Kleine-König 提交于
The ALIGN_DOWN macro was only used in NUM_PAGES_SPANNED. So make the latter easier and get rid of the former. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ky Srinivasan 提交于
All guest specific data gathering is implemented in a user-mode daemon. The kernel component of KVP passes the "key" to this daemon and the daemon is responsible for passing back the corresponding value. This daemon communicates with the kernel component via a netlink channel. Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: NK. Y. Srinivasan <ksrinivasan@novell.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ky Srinivasan 提交于
This is an implementation of the key value/pair (KVP) functionality for Linux guests hosted on HyperV. This component communicates with the host to support the KVP functionality. Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: NK. Y. Srinivasan <ksrinivasan@novell.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ky Srinivasan 提交于
The hv_utils module will be composed of more than one file; rename hv_utils.c to accommodate this without changing the module name. Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: NK. Y. Srinivasan <ksrinivasan@novell.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ky Srinivasan 提交于
Added a connector index to support key value/pair (KVP) functionality for Linux guests hosted on a HyperV platform. Signed-off-by: NK. Y. Srinivasan <ksrinivasan@novell.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 19 1月, 2011 11 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging由 Linus Torvalds 提交于
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (lm93) Add support for LM94
-
由 Linus Torvalds 提交于
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: Validate cpu early in perf_event_alloc() perf: Find_get_context: fix the per-cpu-counter check perf: Fix contexted inheritance
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Clear irqstack thread_info x86: Make relocatable kernel work with new binutils
-
git://git.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (26 commits) MIPS: Malta: enable Cirrus FB console MIPS: add CONFIG_VIRTUALIZATION for virtio support MIPS: Implement __read_mostly MIPS: ath79: add common WMAC device for AR913X based boards MIPS: ath79: Add initial support for the Atheros AP81 reference board MIPS: ath79: add common SPI controller device SPI: Add SPI controller driver for the Atheros AR71XX/AR724X/AR913X SoCs MIPS: ath79: add common GPIO buttons device MIPS: ath79: add common watchdog device MIPS: ath79: add common GPIO LEDs device MIPS: ath79: add initial support for the Atheros PB44 reference board MIPS: ath79: utilize the MIPS multi-machine support MIPS: ath79: add GPIOLIB support MIPS: Add initial support for the Atheros AR71XX/AR724X/AR931X SoCs MIPS: jump label: Add MIPS support. MIPS: Use WARN() in uasm for better diagnostics. MIPS: Optimize TLB handlers for Octeon CPUs MIPS: Add LDX and LWX instructions to uasm. MIPS: Use BBIT instructions in TLB handlers MIPS: Declare uasm bbit0 and bbit1 functions. ...
-
由 Guenter Roeck 提交于
This patch adds basic support for LM94 to the LM93 driver. LM94 specific sensors and features are not supported. Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com> Acked-by: NJean Delvare <khali@linux-fr.org>
-
由 Oleg Nesterov 提交于
Starting from perf_event_alloc()->perf_init_event(), the kernel assumes that event->cpu is either -1 or the valid CPU number. Change perf_event_alloc() to validate this argument early. This also means we can remove the similar check in find_get_context(). Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Roland McGrath <roland@redhat.com> Cc: gregkh@suse.de Cc: stable@kernel.org LKML-Reference: <20110118161032.GC693@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Oleg Nesterov 提交于
If task == NULL, find_get_context() should always check that cpu is correct. Afaics, the bug was introduced by 38a81da2 "perf events: Clean up pid passing", but even before that commit "&& cpu != -1" was not exactly right, -ESRCH from find_task_by_vpid() is not accurate. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Roland McGrath <roland@redhat.com> Cc: gregkh@suse.de Cc: stable@kernel.org LKML-Reference: <20110118161008.GB693@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Aurelien Jarno 提交于
While most users of a physical Malta board are using the serial port as the console, a lot of QEMU users would prefer to interact with a graphical console. Enable the Cirrus FB support in the Malta default configuration to make that possible. Note that the default console will still be the serial port, users have to pass "console=tty0" to the kernel to use the Cirrus FB. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2001/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Aurelien Jarno 提交于
Add CONFIG_VIRTUALIZATION to the MIPS architecture and include the the virtio code there. Used to enable the virtio drivers under QEMU. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2002/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
Just do what everyone else is doing by placing __read_mostly things in the .data.read_mostly section. mips_io_port_base can not be read-only (const) and writable (__read_mostly) at the same time. One of them has to go, so I chose to eliminate the __read_mostly. It will still get stuck in a portion of memory that is not adjacent to things that are written, and thus not be on a dirty cache line, for whatever that is worth. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1702/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-