- 22 8月, 2011 2 次提交
-
-
由 Jeremy Fitzhardinge 提交于
Steven Rostedt says we should use CONFIG_EVENT_TRACING. Cc:Steven Rostedt <rostedt@goodmis.org> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Stefano Stabellini 提交于
Fix regression for HVM case on older (<4.1.1) hypervisors caused by commit 99bbb3a8 Author: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Date: Thu Dec 2 17:55:10 2010 +0000 xen: PV on HVM: support PV spinlocks and IPIs This change replaced the SMP operations with event based handlers without taking into account that this only works when the hypervisor supports callback vectors. This causes unexplainable hangs early on boot for HVM guests with more than one CPU. BugLink: http://bugs.launchpad.net/bugs/791850 CC: stable@kernel.org Signed-off-by: NStefan Bader <stefan.bader@canonical.com> Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Tested-and-Reported-by: NStefan Bader <stefan.bader@canonical.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 19 8月, 2011 15 次提交
-
-
由 Naveen Krishna Chatradhi 提交于
Should be passing the parent clk object when calling for parent rate. Signed-off-by: NNaveen Krishna Chatradhi <ch.naveen@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kyungmin Park 提交于
This is required to use SWRESET. Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Yulgon Kim 提交于
This patch increases reset delay from 50 usec to 80 usec for USB HOST PHY. In order to reset USB HOST PHY controller properly, a little extra time is required during its reset cycle. Signed-off-by: NYulgon Kim <yulgon.kim@samsung.com> Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Marek Szyprowski 提交于
This patch adds chained IRQ enter/exit functions to gpio interrupt handler in order to function correctly on primary controllers with different methods of flow control. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Marek Szyprowski 提交于
This patch adds chained IRQ enter/exit functions to external interrupt handler in order to function correctly on primary controllers with different methods of flow control. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Marek Szyprowski 提交于
This patch adds chained IRQ enter/exit functions to timer interrupt handler in order to function correctly on primary controllers with different methods of flow control. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Abhilash Kesavan 提交于
When S3C_PM_DEBUG_LED_SMDK is enabled for suspend/resume debugging, the following compilation error occurs: arch/arm/mach-s3c64xx/pm.c: In function 's3c_pm_debug_smdkled': arch/arm/mach-s3c64xx/pm.c:41: error: implicit declaration of function 'gpio_set_value' arch/arm/mach-s3c64xx/pm.c:41: error: implicit declaration of function 'S3C64XX_GPN' arch/arm/mach-s3c64xx/pm.c: In function 's3c64xx_pm_init': arch/arm/mach-s3c64xx/pm.c:184: error: implicit declaration of function 'gpio_request' arch/arm/mach-s3c64xx/pm.c:188: error: implicit declaration of function 'gpio_direction_output' Fix the error by including linux/gpio.h Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Abhilash Kesavan 提交于
Fixed the following warning for S5PV210. arch/arm/mach-s5pv210/pm.c: In function 's5pv210_pm_add': arch/arm/mach-s5pv210/pm.c:139: warning: assignment from incompatible pointer type Also, staticized the function. Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Sylwester Nawrocki 提交于
This is a regression fix after migration to the external GIC. The breakage has been introduced in commit 69644a8e ("ARM: EXYNOS4: modify interrupt mappings for external GIC") Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: added commit id] Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Huang Weiyi 提交于
Remove duplicated #include('s) in arch/arm/mach-exynos4/cpu.c Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Jonghwan Choi 提交于
Signed-off-by: NJonghwan Choi <jhbird.choi@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kyungmin Park 提交于
Use the correct regulator names for cpufreq Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
WARNING: vmlinux.o(.text+0xf47c): Section mismatch in reference from the function samsung_bl_set() to the (unknown reference) .init.data:(unknown) The function samsung_bl_set() references the (unknown reference) __initdata (unknown). This is often because samsung_bl_set lacks a __initdata annotation or the annotation of (unknown) is wrong. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
According to commit 659fb32d ("replace irq_gc_ack() with {set,clr}_bit variants"), this should be fixed. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Ian Campbell 提交于
CC arch/sparc/kernel/pcic.o arch/sparc/kernel/pcic.c: In function 'pcic_probe': arch/sparc/kernel/pcic.c:359:33: error: array subscript is above array bounds [-Werror=array-bounds] arch/sparc/kernel/pcic.c:359:8: error: array subscript is above array bounds [-Werror=array-bounds] arch/sparc/kernel/pcic.c:360:33: error: array subscript is above array bounds [-Werror=array-bounds] arch/sparc/kernel/pcic.c:360:8: error: array subscript is above array bounds [-Werror=array-bounds] arch/sparc/kernel/pcic.c:361:33: error: array subscript is above array bounds [-Werror=array-bounds] arch/sparc/kernel/pcic.c:361:8: error: array subscript is above array bounds [-Werror=array-bounds] cc1: all warnings being treated as errors I'm not particularly familiar with sparc but t_nmi (defined in head_32.S via the TRAP_ENTRY macro) and pcic_nmi_trap_patch (defined in entry.S) both appear to be 4 instructions long and I presume from the usage that instructions are int sized. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Reviewed-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 8月, 2011 2 次提交
-
-
由 Jan Beulich 提交于
The order-based approach is not only less efficient (requiring a shift and a compare, typical generated code looking like this mov eax, [machine_to_phys_order] mov ecx, eax shr ebx, cl test ebx, ebx jnz ... whereas a direct check requires just a compare, like in cmp ebx, [machine_to_phys_nr] jae ... ), but also slightly dangerous in the 32-on-64 case - the element address calculation can wrap if the next power of two boundary is sufficiently far away from the actual upper limit of the table, and hence can result in user space addresses being accessed (with it being unknown what may actually be mapped there). Additionally, the elimination of the mistaken use of fls() here (should have been __fls()) fixes a latent issue on x86-64 that would trigger if the code was run on a system with memory extending beyond the 44-bit boundary. CC: stable@kernel.org Signed-off-by: NJan Beulich <jbeulich@novell.com> [v1: Based on Jeremy's feedback] Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Randy Dunlap 提交于
CONFIG_TASKSTATS just had a change to use netlink, including a change to "depends on NET". Since "select" does not follow dependencies, KVM also needs to depend on NET to prevent build errors when CONFIG_NET is not enabled. Sample of the reported "undefined reference" build errors: taskstats.c:(.text+0x8f686): undefined reference to `nla_put' taskstats.c:(.text+0x8f721): undefined reference to `nla_reserve' taskstats.c:(.text+0x8f8fb): undefined reference to `init_net' taskstats.c:(.text+0x8f905): undefined reference to `netlink_unicast' taskstats.c:(.text+0x8f934): undefined reference to `kfree_skb' taskstats.c:(.text+0x8f9e9): undefined reference to `skb_clone' taskstats.c:(.text+0x90060): undefined reference to `__alloc_skb' taskstats.c:(.text+0x901e9): undefined reference to `skb_put' taskstats.c:(.init.text+0x4665): undefined reference to `genl_register_family' taskstats.c:(.init.text+0x4699): undefined reference to `genl_register_ops' taskstats.c:(.init.text+0x4710): undefined reference to `genl_unregister_ops' taskstats.c:(.init.text+0x471c): undefined reference to `genl_unregister_family' Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 16 8月, 2011 4 次提交
-
-
由 Randy Dunlap 提交于
arch/x86/mm/fault.c needs to include asm/vsyscall.h to fix a build error: arch/x86/mm/fault.c: In function '__bad_area_nosemaphore': arch/x86/mm/fault.c:728: error: 'VSYSCALL_START' undeclared (first use in this function) Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mikael Pettersson 提交于
The sparc32 version of arch_write_unlock() is just a plain assignment. Unfortunately this allows the compiler to schedule side-effects in a protected region to occur after the HW-level unlock, which is broken. E.g., the following trivial test case gets miscompiled: #include <linux/spinlock.h> rwlock_t lock; int counter; void foo(void) { write_lock(&lock); ++counter; write_unlock(&lock); } Fixed by adding a compiler memory barrier to arch_write_unlock(). The sparc64 version combines the barrier and assignment into a single asm(), and implements the operation as a static inline, so that's what I did too. Compile-tested with sparc32_defconfig + CONFIG_SMP=y. Signed-off-by: NMikael Pettersson <mikpe@it.uu.se> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mikael Pettersson 提交于
The sparc64 spinlock_64.h contains a number of operations defined first as static inline functions, and then as macros with the same names and parameters as the functions. Maybe this was needed at some point in the past, but now nothing seems to depend on these macros (checked with a recursive grep looking for ifdefs on these names). Other archs don't define these identity-macros. So this patch deletes these unnecessary macros. Compile-tested with sparc64_defconfig. Signed-off-by: NMikael Pettersson <mikpe@it.uu.se> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 8月, 2011 1 次提交
-
-
由 David S. Miller 提交于
Reported-by: NPieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 8月, 2011 10 次提交
-
-
由 Lennert Buytenhek 提交于
Instead of setting up a match interrupt for 'current_time + delta' on ->set_next_event(), program timer 0 to count down from 'delta - 1' and trigger an interrupt when it reaches zero. Signed-off-by: NLennert Buytenhek <buytenh@laptop.org> Acked-by: NHaojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
-
由 Lennert Buytenhek 提交于
Signed-off-by: NLennert Buytenhek <buytenh@laptop.org> Acked-by: NHaojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
-
由 Lennert Buytenhek 提交于
Currently, arch-mmp/time.c uses timer 0 both as a clocksource timer and as a clockevent timer, the latter by setting up a comparator interrupt to match on 'current_time + delta'. This is problematic if delta is small enough, as that can lead to 'current_time + delta' already being in the past when comparator setup has finished, leading to the requested event not triggering. As there is also a silicon issue that requires stopping a timer's counter while writing to one of its match registers, we'll switch to using two separate timers -- timer 0 as clockevent timer, which we'll start and stop on every invocation of ->set_next_event(), and timer 1 as clocksource timer, which will be free-running. This first patch enables timer 1 on boot, so that we can use it as clocksource timer. Signed-off-by: NLennert Buytenhek <buytenh@laptop.org> Acked-by: NHaojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
-
由 Tanmay Upadhyay 提交于
Signed-off-by: NTanmay Upadhyay <tanmay.upadhyay@einfochips.com> Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
-
由 Tanmay Upadhyay 提交于
Move definitions from mfp-gplugd.h to mfp-pxa168.h as they aren't gplugD specific. Signed-off-by: NTanmay Upadhyay <tanmay.upadhyay@einfochips.com> Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
-
由 Lennert Buytenhek 提交于
This got added in: commit ef6c8445 Author: Haojian Zhuang <haojian.zhuang@marvell.com> Date: Wed Nov 24 11:54:25 2010 +0800 ARM: pxa: add iwmmx support for PJ4 which does: - mrc p15, 0, r2, c15, c1, 0 - orr r2, r2, #0x3 @ enable access to CP0 and CP1 - mcr p15, 0, r2, c15, c1, 0 + @ enable access to CP0 and CP1 + XSC(mrc p15, 0, r2, c15, c1, 0) + XSC(orr r2, r2, #0x3) + XSC(mcr p15, 0, r2, c15, c1, 0) but then later does: - mrc p15, 0, r4, c15, c1, 0 - orr r4, r4, #0x3 @ enable access to CP0 and CP1 - mcr p15, 0, r4, c15, c1, 0 + @ enable access to CP0 and CP1 + XSC(mrc p15, 0, r4, c15, c1, 0) + XSC(orr r4, r4, #0xf) + XSC(mcr p15, 0, r4, c15, c1, 0) Signed-off-by: NLennert Buytenhek <buytenh@laptop.org> Acked-by Haojian <haojian.zhuang@gmail.com> Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
-
由 Andy Lutomirski 提交于
There are three choices: vsyscall=native: Vsyscalls are native code that issues the corresponding syscalls. vsyscall=emulate (default): Vsyscalls are emulated by instruction fault traps, tested in the bad_area path. The actual contents of the vsyscall page is the same as the vsyscall=native case except that it's marked NX. This way programs that make assumptions about what the code in the page does will not be confused when they read that code. vsyscall=none: Trying to execute a vsyscall will segfault. Signed-off-by: NAndy Lutomirski <luto@mit.edu> Link: http://lkml.kernel.org/r/8449fb3abf89851fd6b2260972666a6f82542284.1312988155.git.luto@mit.eduSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Andy Lutomirski 提交于
getcpu is available as a vdso entry and an emulated vsyscall. Programs that for some reason don't want to use the vdso should still be able to call getcpu without relying on the slow emulated vsyscall. It costs almost nothing to expose it as a real syscall. We also need this for the following patch in vsyscall=native mode. Signed-off-by: NAndy Lutomirski <luto@mit.edu> Link: http://lkml.kernel.org/r/6b19f55bdb06a0c32c2fa6dba9b6f222e1fde999.1312988155.git.luto@mit.eduSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Andy Lutomirski 提交于
As of commit 98d0ac38 Author: Andy Lutomirski <luto@mit.edu> Date: Thu Jul 14 06:47:22 2011 -0400 x86-64: Move vread_tsc and vread_hpet into the vDSO user code no longer directly calls into code in arch/x86/kernel/, so we don't need compile flag hacks to make it safe. All vdso code is in the vdso directory now. Signed-off-by: NAndy Lutomirski <luto@mit.edu> Link: http://lkml.kernel.org/r/835cd05a4c7740544d09723d6ba48f4406f9826c.1312988155.git.luto@mit.eduSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Linus Walleij 提交于
The PCI nanoengine driver in the SA1100 machine probably has not been building for some time. It probably dragged hardware.h in implicitly and now it doesn't anymore. After this an SA1100 build selecting all system variants will build successfully. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 10 8月, 2011 6 次提交
-
-
由 Benjamin Herrenschmidt 提交于
Brown paper bag day, previous commit wouldn't work very well with modules enabled. Move the exports into the ifdef. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Hemant Pedanekar 提交于
If CONFIG_OMAP_32K_TIMER is not selected and dmtimer is used as clocksource, the timer stops counting once overflow occurs as it was not set in autoreload mode. This results into timekeeping failure: for example, 'sleep 1' at the shell after the timer counter overflow would hang. This patch sets up autoreload when starting the clocksource timer which fixes the above issue. Signed-off-by: NHemant Pedanekar <hemantp@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Johan Hovold 提交于
Since 7203f8a4 (arm: mach-omap2: remove NULL board_mux from board files) NULL board_mux is defined in mux.h. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Thomas Meyer 提交于
Use kstrdup rather than duplicating its implementation The semantic patch that makes this output is available in scripts/coccinelle/api/kstrdup.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/Signed-off-by: NThomas Meyer <thomas@m3y3r.de> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Maxin John 提交于
The pointer "va" returned from "phys_to_virt(pa)" is never used in "sgtable_fill_kmalloc()".So,it is safe to remove this set-but-unused variable. Signed-off-by: NMaxin B. John <maxin.john@gmail.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Oleg Drokin 提交于
Machine database already updated: http://www.arm.linux.org.uk/developer/machines/list.php?id=3284Signed-off-by: NOleg Drokin <green@linuxhacker.ru> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NTony Lindgren <tony@atomide.com>
-