mark kvm->busses as rcu protected and use the correct access
function everywhere.

found by sparse
virt/kvm/kvm_main.c:3490:15: error: incompatible types in comparison expression (different address spaces)
virt/kvm/kvm_main.c:3509:15: error: incompatible types in comparison expression (different address spaces)
virt/kvm/kvm_main.c:3561:15: error: incompatible types in comparison expression (different address spaces)
virt/kvm/kvm_main.c:3644:15: error: incompatible types in comparison expression (different address spaces)
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

irq routing is rcu protected. Use the proper access functions.
Found by sparse

virt/kvm/irqchip.c:233:13: warning: incorrect type in assignment (different address spaces)
virt/kvm/irqchip.c:233:13:    expected struct kvm_irq_routing_table *old
virt/kvm/irqchip.c:233:13:    got struct kvm_irq_routing_table [noderef] <asn:4>*irq_routing
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>

We do use rcu to protect the pid pointer. Mark it as such and
adopt all code to use the proper access methods.

This was detected by sparse.
"virt/kvm/kvm_main.c:2248:15: error: incompatible types in comparison
expression (different address spaces)"
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>

The call to kvm_put_kvm was removed from error handling in commit
506cfba9 ("KVM: don't use anon_inode_getfd() before possible
failures"), but it is _not_ a memory leak.  Reuse Al's explanation
to avoid that someone else makes the same mistake.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Replaces "S_IRUGO | S_IWUSR" with 0644. The reason is that symbolic
permissions considered harmful:
https://lwn.net/Articles/696229/Signed-off-by: NRoman Storozhenko <romeusmeister@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Once we enable ARCH_SUPPORTS_MEMORY_FAILURE on arm64, notifications for
broken memory can call memory_failure() in mm/memory-failure.c to offline
pages of memory, possibly signalling user space processes and notifying all
the in-kernel users.

memory_failure() has two modes, early and late. Early is used by
machine-managers like Qemu to receive a notification when a memory error is
notified to the host. These can then be relayed to the guest before the
affected page is accessed. To enable this, the process must set
PR_MCE_KILL_EARLY in PR_MCE_KILL_SET using the prctl() syscall.

Once the early notification has been handled, nothing stops the
machine-manager or guest from accessing the affected page. If the
machine-manager does this the page will fail to be mapped and SIGBUS will
be sent. This patch adds the equivalent path for when the guest accesses
the page, sending SIGBUS to the machine-manager.

These two signals can be distinguished by the machine-manager using their
si_code: BUS_MCEERR_AO for 'action optional' early notifications, and
BUS_MCEERR_AR for 'action required' synchronous/late notifications.

Do as x86 does, and deliver the SIGBUS when we discover pfn ==
KVM_PFN_ERR_HWPOISON. Use the hugepage size as si_addr_lsb if this vma was
allocated as a hugepage. Transparent hugepages will be split by
memory_failure() before we see them here.

Cc: Punit Agrawal <punit.agrawal@arm.com>
Signed-off-by: NJames Morse <james.morse@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

When reading the cntpct_el0 in guest with VHE (Virtual Host Extension)
enabled in host, the "Unsupported guest sys_reg access" error reported.
The reason is cnthctl_el2.EL1PCTEN is not enabled, which is expected
to be done in kvm_timer_init_vhe(). The problem is kvm_timer_init_vhe
is called by cpu_init_hyp_mode, and which is called when VHE is disabled.
This patch remove the incorrect call to kvm_timer_init_vhe() from
cpu_init_hyp_mode(), and calls kvm_timer_init_vhe() to enable
cnthctl_el2.EL1PCTEN in cpu_hyp_reinit().

Fixes: 488f94d7 ("KVM: arm64: Access CNTHCTL_EL2 bit fields correctly on VHE systems")
Cc: stable@vger.kernel.org
Signed-off-by: NHu Huajun <huhuajun@huawei.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

Per ARM DDI 0487B.a, the registers are named ICC_IGRPEN*_EL1 rather than
ICC_GRPEN*_EL1. Correct our mnemonics and comments to match, before we
add more GICv3 register definitions.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
Acked-by: NChristoffer Dall <cdall@linaro.org>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

A write-to-read-only GICv3 access should UNDEF at EL1. But since
we're in complete paranoia-land with broken CPUs, let's assume the
worse and gracefully handle the case.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

A read-from-write-only GICv3 access should UNDEF at EL1. But since
we're in complete paranoia-land with broken CPUs, let's assume the
worse and gracefully handle the case.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

In order to facilitate debug, let's log which class of GICv3 system
registers are trapped.
Tested-by: NAlexander Graf <agraf@suse.de>
Acked-by: NDavid Daney <david.daney@cavium.com>
Acked-by: NChristoffer Dall <cdall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

Now that we're able to safely handle common sysreg access, let's
give the user the opportunity to enable it by passing a specific
command-line option (vgic_v3.common_trap).
Tested-by: NAlexander Graf <agraf@suse.de>
Acked-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Acked-by: NChristoffer Dall <cdall@linaro.org>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

Add a handler for reading/writing the guest's view of the ICC_PMR_EL1
register, which is located in the ICH_VMCR_EL2.VPMR field.
Tested-by: NAlexander Graf <agraf@suse.de>
Acked-by: NDavid Daney <david.daney@cavium.com>
Acked-by: NChristoffer Dall <cdall@linaro.org>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

Add a handler for reading/writing the guest's view of the ICV_CTLR_EL1
register. only EOIMode and CBPR are of interest here, as all the other
bits directly come from ICH_VTR_EL2 and are Read-Only.
Tested-by: NAlexander Graf <agraf@suse.de>
Acked-by: NDavid Daney <david.daney@cavium.com>
Acked-by: NChristoffer Dall <cdall@linaro.org>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

Add a handler for reading the guest's view of the ICV_RPR_EL1
register, returning the highest active priority.
Tested-by: NAlexander Graf <agraf@suse.de>
Acked-by: NDavid Daney <david.daney@cavium.com>
Acked-by: NChristoffer Dall <cdall@linaro.org>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

Add a handler for writing the guest's view of the ICC_DIR_EL1
register, performing the deactivation of an interrupt if EOImode
is set ot 1.
Tested-by: NAlexander Graf <agraf@suse.de>
Acked-by: NDavid Daney <david.daney@cavium.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

Some Cavium Thunder CPUs suffer a problem where a KVM guest may
inadvertently cause the host kernel to quit receiving interrupts.

Use the Group-0/1 trapping in order to deal with it.

[maz]: Adapted patch to the Group-0/1 trapping, reworked commit log
Tested-by: NAlexander Graf <agraf@suse.de>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

Now that we're able to safely handle Group-0 sysreg access, let's
give the user the opportunity to enable it by passing a specific
command-line option (vgic_v3.group0_trap).
Tested-by: NAlexander Graf <agraf@suse.de>
Acked-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

In order to be able to trap Group-0 GICv3 system registers, we need to
set ICH_HCR_EL2.TALL0 begore entering the guest. This is conditionnaly
done after having restored the guest's state, and cleared on exit.
Tested-by: NAlexander Graf <agraf@suse.de>
Acked-by: NDavid Daney <david.daney@cavium.com>
Acked-by: NChristoffer Dall <cdall@linaro.org>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

A number of Group-0 registers can be handled by the same accessors
as that of Group-1, so let's add the required system register encodings
and catch them in the dispatching function.
Tested-by: NAlexander Graf <agraf@suse.de>
Acked-by: NDavid Daney <david.daney@cavium.com>
Acked-by: NChristoffer Dall <cdall@linaro.org>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

Add a handler for reading/writing the guest's view of the ICC_IGRPEN0_EL1
register, which is located in the ICH_VMCR_EL2.VENG0 field.
Tested-by: NAlexander Graf <agraf@suse.de>
Acked-by: NDavid Daney <david.daney@cavium.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

Add a handler for reading/writing the guest's view of the ICC_BPR0_EL1
register, which is located in the ICH_VMCR_EL2.BPR0 field.
Tested-by: NAlexander Graf <agraf@suse.de>
Acked-by: NDavid Daney <david.daney@cavium.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

Now that we're able to safely handle Group-1 sysreg access, let's
give the user the opportunity to enable it by passing a specific
command-line option (vgic_v3.group1_trap).
Tested-by: NAlexander Graf <agraf@suse.de>
Acked-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Acked-by: NChristoffer Dall <cdall@linaro.org>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

In order to be able to trap Group-1 GICv3 system registers, we need to
set ICH_HCR_EL2.TALL1 before entering the guest. This is conditionally
done after having restored the guest's state, and cleared on exit.
Tested-by: NAlexander Graf <agraf@suse.de>
Acked-by: NDavid Daney <david.daney@cavium.com>
Acked-by: NChristoffer Dall <cdall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

Add a handler for reading the guest's view of the ICV_HPPIR1_EL1
register. This is a simple parsing of the available LRs, extracting the
highest available interrupt.
Tested-by: NAlexander Graf <agraf@suse.de>
Acked-by: NDavid Daney <david.daney@cavium.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

Add a handler for reading/writing the guest's view of the ICV_AP1Rn_EL1
registers. We just map them to the corresponding ICH_AP1Rn_EL2 registers.
Tested-by: NAlexander Graf <agraf@suse.de>
Acked-by: NDavid Daney <david.daney@cavium.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

Add a handler for writing the guest's view of the ICC_EOIR1_EL1
register. This involves dropping the priority of the interrupt,
and deactivating it if required (EOImode == 0).
Tested-by: NAlexander Graf <agraf@suse.de>
Acked-by: NDavid Daney <david.daney@cavium.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

Add a handler for reading the guest's view of the ICC_IAR1_EL1
register. This involves finding the highest priority Group-1
interrupt, checking against both PMR and the active group
priority, activating the interrupt and setting the group
priority as active.
Tested-by: NAlexander Graf <agraf@suse.de>
Acked-by: NDavid Daney <david.daney@cavium.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

Add a handler for reading/writing the guest's view of the ICC_IGRPEN1_EL1
register, which is located in the ICH_VMCR_EL2.VENG1 field.
Tested-by: NAlexander Graf <agraf@suse.de>
Acked-by: NDavid Daney <david.daney@cavium.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

Add a handler for reading/writing the guest's view of the ICC_BPR1_EL1
register, which is located in the ICH_VMCR_EL2.BPR1 field.
Tested-by: NAlexander Graf <agraf@suse.de>
Acked-by: NDavid Daney <david.daney@cavium.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

In order to start handling guest access to GICv3 system registers,
let's add a hook that will get called when we trap a system register
access. This is gated by a new static key (vgic_v3_cpuif_trap).
Tested-by: NAlexander Graf <agraf@suse.de>
Acked-by: NDavid Daney <david.daney@cavium.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NChristoffer Dall <cdall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

As we're about to trap CP15 accesses and handle them at EL2, we
need to evaluate whether or not the condition flags are valid,
as an implementation is allowed to trap despite the condition
not being met.

Tagging the function as __hyp_text allows this. We still rely on
the cc_map array to be mapped at EL2 by virtue of being "const",
and the linker to only emit relative references.
Tested-by: NAlexander Graf <agraf@suse.de>
Acked-by: NDavid Daney <david.daney@cavium.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

As we're about to access the Active Priority registers a lot more,
let's define accessors that take the register number as a parameter.
Tested-by: NAlexander Graf <agraf@suse.de>
Acked-by: NDavid Daney <david.daney@cavium.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

The PMU IRQ number is set through the VCPU device's KVM_SET_DEVICE_ATTR
ioctl handler for the KVM_ARM_VCPU_PMU_V3_IRQ attribute, but there is no
enforced or stated requirement that this must happen after initializing
the VGIC.  As a result, calling vgic_valid_spi() which relies on the
nr_spis being set during the VGIC init can incorrectly fail.

Introduce irq_is_spi, which determines if an IRQ number is within the
SPI range without verifying it against the actual VGIC properties.
Signed-off-by: NChristoffer Dall <cdall@linaro.org>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>

When injecting an IRQ to the VGIC, you now have to present an owner
token for that IRQ line to show that you are the owner of that line.

IRQ lines driven from userspace or via an irqfd do not have an owner and
will simply pass a NULL pointer.

Also get rid of the unused kvm_vgic_inject_mapped_irq prototype.
Signed-off-by: NChristoffer Dall <cdall@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>

We check if other in-kernel devices have already been connected to the
GIC for a particular interrupt line when possible.

For the PMU, we can do this whenever setting the PMU interrupt number
from userspace.

For the timers, we have to wait until we try to enable the timer,
because we have a concept of default IRQ numbers that userspace
shouldn't have to work around in the initialization phase.
Signed-off-by: NChristoffer Dall <cdall@linaro.org>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>

Having multiple devices being able to signal the same interrupt line is
very confusing and almost certainly guarantees a configuration error.

Therefore, introduce a very simple allocator which allows a device to
claim an interrupt line from the vgic for a given VM.
Signed-off-by: NChristoffer Dall <cdall@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>

First we define an ABI using the vcpu devices that lets userspace set
the interrupt numbers for the various timers on both the 32-bit and
64-bit KVM/ARM implementations.

Second, we add the definitions for the groups and attributes introduced
by the above ABI.  (We add the PMU define on the 32-bit side as well for
symmetry and it may get used some day.)

Third, we set up the arch-specific vcpu device operation handlers to
call into the timer code for anything related to the
KVM_ARM_VCPU_TIMER_CTRL group.

Fourth, we implement support for getting and setting the timer interrupt
numbers using the above defined ABI in the arch timer code.

Fifth, we introduce error checking upon enabling the arch timer (which
is called when first running a VCPU) to check that all VCPUs are
configured to use the same PPI for the timer (as mandated by the
architecture) and that the virtual and physical timers are not
configured to use the same IRQ number.
Signed-off-by: NChristoffer Dall <cdall@linaro.org>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>

We currently initialize the arch timer IRQ numbers from the reset code,
presumably because we once intended to model multiple CPU or SoC types
from within the kernel and have hard-coded reset values in the reset
code.

As we are moving towards userspace being in charge of more fine-grained
CPU emulation and stitching together the pieces needed to emulate a
particular type of CPU, we should no longer have a tight coupling
between resetting a VCPU and setting IRQ numbers.

Therefore, move the logic to define and use the default IRQ numbers to
the timer code and set the IRQ number immediately when creating the
VCPU.
Signed-off-by: NChristoffer Dall <cdall@linaro.org>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>

We are about to need this define in the arch timer code as well so move
it to a common location.
Signed-off-by: NChristoffer Dall <cdall@linaro.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>