- 03 10月, 2016 26 次提交
-
-
由 Lijun Ou 提交于
This lock will be used in query port interface, and will be called while IB device was registered to OFED framework/IB Core. So, the lock of iboe must be initiated before IB device was registered. Signed-off-by: NLijun Ou <oulijun@huawei.com> Signed-off-by: NDongdong Huang(Donald) <hdd.huang@huawei.com> Reviewed-by: NWei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Wei Hu (Xavier) 提交于
This patch optimized the codes of aeq and ceq interrupt handle and fixed the bug in the calculation of qpn. For the special qp(GSI or SMI), calculated the qp number according to physical port and the qpn reported in the event of async event queue. Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Wei Hu (Xavier) 提交于
This patch deleted the sqp_start from the structure hns_roce_caps, and modified the calculation of the qp number. Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Wei Hu (Xavier) 提交于
In hip06, there's no interface to release hem memory. So, hardware can't identify whether hem memory released or not. If all context in a hem memory released, the related hem memory will be released by driver and reused by others. But, hardware don't know that this memory can't be used already. In order to fix this bug, hns roce driver reserved 128K memory for each type of hem(QPC/CQC/MTPT). While unmap hem memory, hns roce driver will write base address of reserved memory according to hem type. Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: NDongdong Huang(Donald) <hdd.huang@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Lijun Ou 提交于
This patch removes the qp_type parameter in hns_roce_set_kernel_sq_size(). Signed-off-by: NLijun Ou <oulijun@huawei.com> Signed-off-by: NPing Zhang <zhangping5@huawei.com> Reviewed-by: NWei Hu <xavier.huwei@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Lijun Ou 提交于
Hns_roce_pd_alloc and hns_roce_reserve_range_qp use unnecessary transformation of parameters. This patch simplify these two functions. Signed-off-by: NLijun Ou <oulijun@huawei.com> Signed-off-by: NDongdong Huang(Donald) <hdd.huang@huawei.com> Reviewed-by: NWei Hu <xavier.huwei@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Lijun Ou 提交于
In current version, it uses uninitialized parameters named refcount and free in hns_roce_cq_event. This patch initializes these parameter in cq alloc and add correspond process in cq free. Signed-off-by: NLijun Ou <oulijun@huawei.com> Signed-off-by: NDongdong Huang(Donald) <hdd.huang@huawei.com> Reviewed-by: NWei Hu <xavier.huwei@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Lijun Ou 提交于
In old version of RoCE, it doesn't support to resize cq. So, we remove parameters related to resize cq. Signed-off-by: NLijun Ou <oulijun@huawei.com> Signed-off-by: NDongdong Huang(Donald) <hdd.huang@huawei.com> Reviewed-by: NWei Hu <xavier.huwei@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Lijun Ou 提交于
The parameter named collapsed unused in hns_roce_cq_alloc. Also, parameter named doorbell_lock unsed in hns_roce_v1_cq_set_ci. This patch optimize these parameters. Signed-off-by: NLijun Ou <oulijun@huawei.com> Reviewed-by: NWei Hu <xavier.huwei@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Lijun Ou 提交于
This patch adds node_guid definition in bindings document. The value of node_guid will be used during RDMA connection. Signed-off-by: NLijun Ou <oulijun@huawei.com> Reviewed-by: NWei Hu <xavier.huwei@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Lijun Ou 提交于
This patch mainly modify the value of HNS_ROCE_SL_SHIFT and delete the lines for assigning for the field of local_enable_e2e_credit in QP1C. Signed-off-by: NLijun Ou <oulijun@huawei.com> Reviewed-by: NWei Hu <xavier.huwei@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Lijun Ou 提交于
Fix bug of modify qp from init to init on user mode. Otherwise, it will oops when rmda cm established. Signed-off-by: NLijun Ou <oulijun@huawei.com> Reviewed-by: NWei Hu <xavier.huwei@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Lijun Ou 提交于
This patch mainly modifies the logic for allocating uar registers. In HiP06 SoC, HW has 8 group of uar registers for kernel and user space application. The uar index is assigned as follows: 0 ------ for kernel 1~7 ------ for user space application Signed-off-by: NLijun Ou <oulijun@huawei.com> Reviewed-by: NWei Hu <xavier.huwei@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Lijun Ou 提交于
This patch mainly adds phy_port to HNS RoCE QP. This shall be used in calculating the GSI QPN for the port. Initally when RDMA is being established, all IB ports share a QPN which later needs to be re-assigned to a particular GSI/QPN and which is per-port. This also fixes a bug in base driver where iboe port was being used instead of phy_port at some places. This values might not be same always. Signed-off-by: NLijun Ou <oulijun@huawei.com> Reviewed-by: NWei Hu <xavier.huwei@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Lijun Ou 提交于
Fix the length of wqe that maybe lead to an error and write the end bytes of QP1C into the register. Signed-off-by: NLijun Ou <oulijun@huawei.com> Reviewed-by: NWei Hu <xavier.huwei@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Lijun Ou 提交于
In the latest IB core version, it has some known issues with memory registration using the local_dma_lkey. Thus RoCE don't expose support for it, and remove device->local_dma_lkey which is introduced to working systems. Signed-off-by: NLijun Ou <oulijun@huawei.com> Reviewed-by: NWei Hu <xavier.huwei@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Lijun Ou 提交于
According to the Infiniband spec, NodeGUID uniquely identifies a node. This must be initialized to some unique value. This patch adds the support to the HNS RoCE driver to fetch the NodeGUID value from DT or ACPI and then use this value to initialize the node_guid parameter of IB device. This value shall be used by RDMA CM. Signed-off-by: NLijun Ou <oulijun@huawei.com> Reviewed-by: NWei Hu <xavier.huwei@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Lijun Ou 提交于
This patch adds get_netdev() function to the IB device. This shall be used to fetch netdev corresponding to the port number. This function would be called by IB core(Generic CM Agent) for example, when the RDMA connection is being established. Signed-off-by: NLijun Ou <oulijun@huawei.com> Reviewed-by: NWei Hu <xavier.huwei@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Daode Huang 提交于
The broadcast packets is filtered in the hardware now, so this process is no need in the driver, just delete it. Signed-off-by: NDaode Huang <huangdaode@hisilicon.com> Reviewed-by: NYisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Daode Huang 提交于
When the dsaf mode receives a broadcast packet, it will filter the packet by comparing the received queue number and destination queue number(get from forwarding table), if they are the same, the packet will be filtered. Otherwise, the packet will be loopback. So this patch select queue 0 to send broadcast and multicast packets. Signed-off-by: NDaode Huang <huangdaode@hisilicon.com> Reviewed-by: NYisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Daode Huang 提交于
As the sub queue id in the broadcast forwarding table is always set to absolute queue 0 rather than the interface's relative queue 0, this will cause the received broadcast packets loopback to rcb. This patch sets the sub queue id to relative queue 0 of each port. Signed-off-by: NDaode Huang <huangdaode@hisilicon.com> Reviewed-by: NYisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Kejian Yan 提交于
After running command "ethtool -t eth0", eth0 can not be connected to network. It is caused by the changing the inner loopback register and this register cannot be changed when hns connected to network. The routine of setting this register needs to be removed and using promisc mode to let the packet looped back pass by dsaf mode. Reported-by: NJun He <hjat2005@huawei.com> Signed-off-by: NKejian Yan <yankejian@huawei.com> Reviewed-by: NYisen Zhaung <yisen.zhuang@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Daode Huang 提交于
Because we handle the received packets after napi, so delete the checking before submitting. It delete the code of read the fbd number register, which reduces the cpu usages while receiving packets Signed-off-by: NDaode Huang <huangdaode@hisilicon.com> Reviewed-by: NYisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Daode Huang 提交于
This patch adds fini_process for v2, it handles the packets recevied by the hardware in the napi porcess. With this patch, the hardware irq numbers will drop 50% per sec. Signed-off-by: NDaode Huang <huangdaode@hisilicon.com> Reviewed-by: NYisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Daode Huang 提交于
When set rx/tx coalesce usecs to 0, the interrupt coalesce will be disabled, but there is a interrupt rate limit which set to 1us, it will cause no interrupt occurs. This patch disable interrupt limit when sets coalsecs usecs to 0, and restores it to 1 in other case. Signed-off-by: NDaode Huang <huangdaode@hisilicon.com> Reviewed-by: NYisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 lipeng 提交于
When hnae_reserve_buffer_map fail, it will break cycle and some buffer description has no available memory, therefore the port will be unavailable. Signed-off-by: NPeng Li <lipeng321@huawei.com> Reviewed-by: NYisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 25 8月, 2016 2 次提交
-
-
由 Salil 提交于
This patch is meant to add support of ACPI to the Hisilicon RoCE driver. Changes done are primarily meant to detect the type and then either use DT specific or ACPI spcific functions. Where ever possible, this patch tries to make use of Unified Device Property Interface APIs to support both DT and ACPI through single interface. This patch depends upon HNS ethernet driver to Reset RoCE. This function within HNS ethernet driver has also been enhanced to support ACPI and is part of other accompanying patch with this patch-set. NOTE: The changes in this patch are done over below branch, https://github.com/dledford/linux/tree/hns-roceSigned-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Salil 提交于
In the Hip06 SoC, the RoCE Engine is part of the Hisilicon Network Subsystem and is dependent upon DSAF module. Therefore, certain functions like RESET are exposed through the common registers of HNS DSAF module which are memory-mapped by the HNS driver and currently can only be accessed through DT/syscon interface. This patch adds the support of ACPI to the existing RoCE reset function in the HNS driver(please refer NOTE 2). Hisilicon RoCE driver (please refer NOTE 1) shall call this reset function during probe time to reset the RoCE Engine. The HNS Reset function indirectly ends up in calling the _DSM() function part of the DSDT ACPI Table. Actual reset functionality for ACPI is implemented within the ACPI DSDT Table which also has been enhanced to support this change. Support of ACPI in the HNS RoCE driver shall be pushed through a different accompanying below patch: "IB/hns: Add support of ACPI to the Hisilicon RoCE Driver" NOTE 1: HNS RoCE driver has already been accepted by its maintainer Doug Ledford<dledford@redhat.com>. Please refer below link: https://www.spinics.net/lists/linux-rdma/msg38850.html NOTE 2: RoCE reset function patch has been accepted and now is part of the net-next: https://www.mail-archive.com/netdev@vger.kernel.org/msg123867.htmlSigned-off-by: NSalil Mehta <salil.mehta@huawei.com> Reviewed-by: NYisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 23 8月, 2016 5 次提交
-
-
由 Wei Yongjun 提交于
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: NWei Yongjun <weiyj.lk@gmail.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 oulijun 提交于
This patch added maintainers for RoCE driver. Signed-off-by: NWei Hu <xavier.huwei@huawei.com> Signed-off-by: NLijun Ou <oulijun@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 oulijun 提交于
This patch added Kconfig and Makefile for building RoCE module. Signed-off-by: NWei Hu <xavier.huwei@huawei.com> Signed-off-by: NNenglong Zhao <zhaonenglong@hisilicon.com> Signed-off-by: NLijun Ou <oulijun@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 oulijun 提交于
These are the various new source code files for the Hisilicon RoCE driver for ARM architecture. Signed-off-by: NWei Hu <xavier.huwei@huawei.com> Signed-off-by: NNenglong Zhao <zhaonenglong@hisilicon.com> Signed-off-by: NLijun Ou <oulijun@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 oulijun 提交于
This patch added DTS binding document for Hisilicon RoCE driver. Signed-off-by: NWei Hu <xavier.huwei@huawei.com> Signed-off-by: NLijun Ou <oulijun@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 22 8月, 2016 3 次提交
-
-
由 David S. Miller 提交于
This reverts commit 5ab1fe72. This change still has problems. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
Simplify the return expression. Signed-off-by: NWei Yongjun <weiyj.lk@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gao Feng 提交于
Use PPP_ALLSTATIONS, PPP_UI, and SEND_SHUTDOWN instead of 0xff, 0x03, and 2 separately. Signed-off-by: NGao Feng <fgao@ikuai8.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 8月, 2016 4 次提交
-
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Acked-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy_dev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Acked-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue由 David S. Miller 提交于
Jeff Kirsher says: ==================== 10GbE Intel Wired LAN Driver Updates 2016-08-20 This series contains updates to ixgbe and ixgbevf. Veola fixes how the backplane reports the media in ethtool, as KR, KX or KX4 based on the backplane interface present. Emil fixes ixgbevf since an incorrect size parameter for ixgbevf_write_msg_read_ack() ended up only giving the PF the first 4 bytes of the MAC address, so correct the size by calculating it on the fly for all instances where we call ixgbevf_write_msg_read_ack(). Added geneve receive offload support for x550em_a. Don fixes the LED interface for x557 since it uses a different interface. Added support for the new x557 copper device. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Don Skidmore 提交于
This patch adds support for the new copper device X557. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-