All platforms supported by this driver are going to get device tree
support in this kernel release so remove code that would have been
actually not used any more.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

S5PV210 is going to get DT support, so we can remove the camera
bits from the only board using camera on S5PV210. This allows to
clean the exynos4-is driver by dropping code for non-dt platforms.
This patch can be dropped if a patch removing the whole board
file is applied first.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Ensure dma_free_coherent() is not called with incorrect arguments
and only when the memory was actually allocated. This will prevent
possible crashes on error paths of the top level media device driver,
when fimc-is device gets unregistered and its driver detached.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Cc: stable@vger.kernel.org # for v3.15
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

CONFIG_COMMON_CLK is not enabled on S5PV210 platform, so include
some clk API data structures conditionally to avoid compilation
errors. These #ifdefs will be removed for next kernel release,
when the S5PV210 platform moves to DT and the common clk API.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Cc: stable@vger.kernel.org # for 3.15
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This patch adds core support for v8 encoder. This
patch also adds register definitions and buffer size
requirements for H264 & VP8 encoding, needed for new
firmware version v8 for MFC
Signed-off-by: NKiran AVND <avnd.kiran@samsung.com>
Signed-off-by: NPawel Osciak <posciak@chromium.org>
Signed-off-by: NArun Kumar K <arun.kk@samsung.com>
[k.debski@samsung.com: Change MFC version macro name to MFC_V8_BIT]
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This patch adds variant data and core support for
V8 decoder. This patch also adds the register definition
file for new firmware version v8 for MFC.
Signed-off-by: NKiran AVND <avnd.kiran@samsung.com>
Signed-off-by: NPawel Osciak <posciak@chromium.org>
Signed-off-by: NArun Kumar K <arun.kk@samsung.com>
[k.debski@samsung.com: Change MFC version macro name to MFC_V8_BIT]
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

MFC versions support a different set of formats, this specially applies
to the raw YUV formats. This patch changes enum_fmt, so that it only
reports formats that are supported by the used MFC version.
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The patch adding the v6 version of MFC changed the default format for
the CAPTURE queue, but this also affects the v5 version. This patch
solves this problem by checking the MFC version before assigning the
default format.
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Renaming the IS_MFCV7 macro to IS_MFCV7_PLUS for the
addition of MFCv8 support which reuses the v7 code.
Signed-off-by: NArun Kumar K <arun.kk@samsung.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This patch is needed in preparation to add MFC V8
where the register offsets are changed w.r.t MFC V6/V7.

This patch adds variants of MFC V6 and V7 while
accessing MFC registers. Registers are kept in mfc context
and are initialized to a particular MFC variant during probe,
which is used instead of macros.

This avoids duplication of the code for MFC variants
V6 & V7, and reduces the if_else checks while accessing
registers of different MFC variants.
Signed-off-by: NKiran AVND <avnd.kiran@samsung.com>
Signed-off-by: NPawel Osciak <posciak@chromium.org>
Signed-off-by: NArun Kumar K <arun.kk@samsung.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The register S5P_FIMV_D_INIT_BUFFER_OPTIONS holds good for v6
firmware too. So moving the definition from v7 regs to v6.
Signed-off-by: NArun Kumar K <arun.kk@samsung.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Update the MPEG4 decoder scratch buffer size as per the
new v6 firmware. This updation is increasing the size and so
is backward compatible with older v6 firmwares.
Signed-off-by: NArun Kumar K <arun.kk@samsung.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Currently, for formats that are not H264, MFC driver will check
the consumed stream size returned by the firmware and, based on that,
will try to decide whether the bitstream buffer contained more than
one frame. If the size of the buffer is larger than the consumed
stream, it assumes that there are more frames in the buffer and that the
buffer should be resubmitted for decode. This rarely works though and
actually introduces problems, because:

- v7 firmware will always return consumed stream size equal to whatever
the driver passed to it when running decode (which is the size of the whole
buffer), which means we will never try to resubmit, because the firmware
will always tell us that it consumed all the data we passed to it;

- v6 firmware will return the number of consumed bytes, but will not
include the padding ("stuffing") bytes that are allowed after the frame
in VP8. Since there is no way of figuring out how many of those bytes
follow the frame without getting the frame size from IVF headers (or
somewhere else, but not from the stream itself), the driver tries to guess that
padding size is not larger than 4 bytes, which is not always true;

The only way to make it work is to queue only one frame per buffer from
userspace and the check in the kernel is useless and wrong for VP8.
So adding VP8 also along with H264 to disallow re-submitting of buffer
back to hardware for decode.
Signed-off-by: NPawel Osciak <posciak@chromium.org>
Signed-off-by: NArun Kumar K <arun.kk@samsung.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Scratch buffer size updated for vp8 encoding as per
the latest v7 firmware. As the new macro increases the
scratch buffer size, it is backward compatible with the older
firmware too.
Signed-off-by: NKiran AVND <avnd.kiran@samsung.com>
Signed-off-by: NArun Kumar K <arun.kk@samsung.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Currently, we allocate private codec buffers on STREAMON, which may fail
if we are out of memory. We don't check for failure though, which will
make us crash with the codec accessing random memory.

We shouldn't be failing STREAMON with out of memory errors though. So move
the allocation of private codec buffers to REQBUFS for OUTPUT queue. Also,
move MFC instance opening and closing to REQBUFS as well, as it's tied to
allocation and deallocation of private codec buffers.
Signed-off-by: NPawel Osciak <posciak@chromium.org>
Signed-off-by: NArun Kumar K <arun.kk@samsung.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This is in preparation for a new flow to fix issues with streamon, which
should not be allocating buffer memory.
Signed-off-by: NPawel Osciak <posciak@chromium.org>
Signed-off-by: NArun Kumar K <arun.kk@samsung.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

- Honor return values from vb2_reqbufs on REQBUFS(0).

- Do not set the number of allocated buffers to 0 if userspace tries
  to request buffers again without freeing them.

- There is no need to verify correct instance state on reqbufs, as we will
  verify this in queue_setup().

- There is also no need to verify that vb2_reqbufs() was able to allocate enough
  buffers (pb_count) and call buf_init on that many buffers (i.e. dst_buf_count
  is at least pb_count), because this will be verified by second queue_setup()
  call as well and vb2_reqbufs() will fail otherwise.

- Only verify state is MFCINST_INIT when allocating, not when freeing.

- Refactor and simplify code.
Signed-off-by: NPawel Osciak <posciak@chromium.org>
Signed-off-by: NArun Kumar K <arun.kk@samsung.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Timestamps for destination buffers are assigned by copying them from
corresponding source buffers when the decode operation results in a frame
being outputted to a destination buffer. But the decision when to do this, i.e.
whether the decode operation on current source buffer produced a destination
frame, is wrongly based on "display status". Display status reflects the status
of the destination buffer, not source.

This used to work for firmwares version <= 6, because in addition to the above,
we'd check the decoded frame type register, which was set to "skipped" if
a destination frame was not produced, exiting early from
s5p_mfc_handle_frame_new().
Firmware >=7 does not set the frame type register for frames that were not
decoded anymore though, which results in us wrongly overwriting timestamps of
previously decoded buffers (firmware reports the same destination buffer address
as previously decoded one if a frame wasn't decoded during current operation).

To do it properly, we should be basing our decision to copy the timestamp on the
status of the source buffer, i.e. "decode status". The decode status register
values are confusing, because in its case "display" means "a frame has been
outputted to a destination buffer". We should copy if "decode and display"
is returned in it. This also works on <= v6 firmware, which behaves in the same
way with regards to decode status register.
Signed-off-by: NPawel Osciak <posciak@chromium.org>
Signed-off-by: NArun Kumar K <arun.kk@samsung.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This patch adds the missing mutex_destroy(), when the driver is removed.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

There are no need to store resource struct and IRQ in the driver
internal structure.
This patch remove these fields and improve error handling by using
proper return codes from devm_ioremap_resource() and devm_request_irq().
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

VIDIOC_STREAMOFF clears the encoder's destination queue -- routines run
from the interrupt handler cannot assume that the queue is non-empty.
Signed-off-by: NJohn Sheu <sheu@google.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Auto BLC and BLC digital offset are disabled when enabling the test
pattern and must be restored when disabling it. The driver does so by
calling the set control handler on the auto BLC and BLC offset controls,
but this programs the hardware with the new value of those controls, not
the current value. Fix this by writing to the registers directly.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The digital side of the Black Level Calibration (BLC) function must be
disabled when generating a test pattern to avoid artifacts in the image.
The driver disables BLC correctly at the hardware level, but the feature
gets reenabled by v4l2_ctrl_handler_setup() the next time the device is
powered on.

Fix this by marking the BLC controls as inactive when generating a test
pattern, and ignoring control set requests on inactive controls.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Rename the memory block resource "vpe_csc" to "csc" since it also exists within
the VIP IP block. This would make the name more generic, and both VPE and VIP DT
nodes in the future can use it.
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add selection ioctl ops. For VPE, cropping makes sense only for the input to
VPE(or V4L2_BUF_TYPE_VIDEO_OUTPUT/MPLANE buffers) and composing makes sense
only for the output of VPE(or V4L2_BUF_TYPE_VIDEO_CAPTURE/MPLANE buffers).

For the CAPTURE type, V4L2_SEL_TGT_COMPOSE results in VPE writing the output
in a rectangle within the capture buffer. For the OUTPUT type, V4L2_SEL_TGT_CROP
results in selecting a rectangle region within the source buffer.

Setting the crop/compose rectangles should successfully result in
re-configuration of registers which are affected when either source or
destination dimensions change, set_srcdst_params() is called for this purpose.
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Some parameters of the VPE descriptors were understood incorrectly. They are now
fixed. The fixes are explained as follows:

- When adding an inbound data descriptor to the VPDMA descriptor list, we intend
  to use c_rect as the cropped region fetched by VPDMA. Therefore, c_rect->width
  shouldn't be used to calculate the line stride, the original image width
  should be used for that. We add a 'width' argument which gives the buffer
  width in memory.

- frame_width and frame_height describe the complete width and height of the
  client to which the channel is connected. If there are multiple channels
  fetching data and providing to the same client, the above 2 arguments should
  be the width and height of the region covered by all the channels. In the case
  where there is only one channel providing pixel data to the client
  (like in VPE), frame_width and frame_height should be the cropped width and
  cropped height respectively. The calculation of these params is done in the
  vpe driver now.

- start_h and start_v is also used in the case of multiple channels to describe
  where each channel should start filling pixel data. We don't use this in VPE,
  and pass 0s to the vpdma_add_in_dtd() helper.

- Some minor changes are made to the vpdma_add_out_dtd() helper. The c_rect
  param is used for specifying the 'composition' target, and 'width'  is added
  to calculate the line stride.
Signed-off-by: NArchit Taneja <archit@ti.com>
Acked-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Changeset 95d2608b created this function, but declared it as
global, by mistake.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

For OMAP and DRA7x, we generally allocate video and graphics buffers through
omapdrm since the corresponding omap-gem driver provides DMM-Tiler backed
contiguous buffers. omapdrm is a dma-buf exporter. These buffers are used by
other drivers in the video pipeline.

Add VB2_DMABUF flag to the io_modes of the vb2 output and capture queues. This
allows the driver to import dma shared buffers.
Reviewed-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

vpe fops(vpe_open in particular) should be called only when VPDMA firmware
is loaded. File operations on the video device are possible the moment it is
registered.

Currently, we register the video device for VPE at driver probe, after calling
a vpdma helper to initialize VPDMA and load firmware. This function is
non-blocking(it calls request_firmware_nowait()), and doesn't ensure that the
firmware is actually loaded when it returns.

We remove the device registration from vpe probe, and move it to a callback
provided by the vpe driver to the vpdma library, through vpdma_create().

The ready field in vpdma_data is no longer needed since we always have firmware
loaded before the device is registered.

A minor problem with this approach is that if the video_register_device
fails(which doesn't really happen), the vpe platform device would be registered.
however, there won't be any v4l2 device corresponding to it.
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

If the saa7134 module is loaded with the saa7134_userptr set to 1,
then USERPTR support is enabled. A check in buffer_prepare
verifies that the pointer is page-aligned.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Convert the saa7134 driver to vb2.

Note that while this uses the vb2-dma-sg version, the VB2_USERPTR mode is
disabled. The DMA hardware only supports DMAing full pages, and in the
USERPTR memory model the first and last scatter-gather buffer is almost
never a full page.

In practice this means that we can't use the VB2_USERPTR mode.

This has been tested with raw video, compressed video, VBI, radio, DVB and
video overlays.

Unfortunately, a vb2 conversion is one of those things you cannot split
up in smaller patches, it's all or nothing. This patch switches the whole
driver over to vb2, using the vb2 ioctl and fop helper functions.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

All dmaqueue's use saa7134_pgtable, so move it into struct saa7134_dmaqueue.
The videobuf_queue priv_data field now points to the dmaqueue struct.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Use consistent _vbq suffix for videobuf_queue fields.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

num_buffers can't be bigger than VIDEO_MAX_FRAME. This is assured by:
  num_buffers = min_t(unsigned int, req->count, VIDEO_MAX_FRAME);

However, this value is overriden by:
  num_buffers = max_t(unsigned int, req->count, q->min_buffers_needed);

It should, instead, use the previously calculated value as an input
to max_t:
  num_buffers = max_t(unsigned int, num_buffers, q->min_buffers_needed);
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The __vb2_queue_cancel function marks the queue as not streaming and
then WARNs when buffers are still owned by the driver. It proceeds to
complete all active buffers by calling vb2_buffer_done with the new
buffer state set to VB2_BUF_STATE_ERROR in that case. This triggers
another WARN_ON due to as new state not being VB2_BUF_STATE_QUEUED while
the queue is not streaming.

Check buffer ownership and complete all active buffers before marking
the queue as not streaming to avoid the double WARN_on.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

[media] em28xx: move fields wq_trigger and streaming_started from struct em28xx to struct em28xx_audio

Both wq_trigger and stream_started are used only to control the em28xx
alsa streaming. They don't belong to em28xx common struct.
Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The tuner address is only used by the v4l submodule and at tuner setup and
can be obtained from the board data directly (if specified).
Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The tda9887 chipset is part of the analog tuner. Move it out of
em28xx-cards.

Also, it is used only one time by the v4l2 sub-module at tuner setup.

With that, we can get rid of an additional data inside the em28xx
common structure.
Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Move V4L2-specific frequency cache to struct em28xx_v4l2.
Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Despite being at the common em28xx struct, those two fields are
actually taking into account only the usage inside em28xx v4l2
submodule. So, move them out of the common struct.
Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>