- 06 7月, 2019 15 次提交
-
-
由 Jian Shen 提交于
Currently, the driver queries the media port information, and updates the port capability periodically. But it sets an error mac->speed_type value, which stops update port capability. Fixes: 88d10bd6 ("net: hns3: add support for multiple media type") Signed-off-by: NJian Shen <shenjian15@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jian Shen 提交于
Flow control autoneg is unsupported for fibre port. It takes no effect for flow control when restart autoneg. This patch fixes it, return -EOPNOTSUPP when user tries to enable flow control autoneg. Signed-off-by: NJian Shen <shenjian15@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jian Shen 提交于
For revision 0x20, the broadcast promisc is enabled by firmware, it's unnecessary to enable it when initializing VF. For revision 0x21, it's necessary to enable broadcast promisc mode when initializing or re-initializing VF, otherwise, it will be unable to send and receive promisc packets. Fixes: f01f5559 ("net: hns3: don't allow vf to enable promisc mode") Signed-off-by: NJian Shen <shenjian15@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shalom Toledo 提交于
Apply by filling the PTP shaper parameters array. Signed-off-by: NShalom Toledo <shalomt@mellanox.com> Reviewed-by: NPetr Machata <petrm@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shalom Toledo 提交于
When getting port up down event (PUDE), change the PTP shaper configuration based on hardware time stamping on/off and the port's speed. Signed-off-by: NShalom Toledo <shalomt@mellanox.com> Reviewed-by: NPetr Machata <petrm@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shalom Toledo 提交于
In order to get more accurate hardware time stamping, the driver needs to enable PTP shaper on the port, for speeds lower than 40 Gbps. Enable the PTP shaper on the port when the user turns on the hardware time stamping, and disable it when the user turns off the hardware time stamping. Signed-off-by: NShalom Toledo <shalomt@mellanox.com> Reviewed-by: NPetr Machata <petrm@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shalom Toledo 提交于
New operation for getting the port's speed as part of port-type-speed operations. Signed-off-by: NShalom Toledo <shalomt@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NPetr Machata <petrm@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shalom Toledo 提交于
Set the PTP shaper parameters during the ptp_init(). For different speeds, there are different parameters. When the port's speed changes and PTP shaper is enabled, the firmware changes the ETS shaper values according to the PTP shaper parameters for this new speed. The PTP shaper parameters array is left empty for now, will be filled in a follow-up patch. Signed-off-by: NShalom Toledo <shalomt@mellanox.com> Reviewed-by: NPetr Machata <petrm@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shalom Toledo 提交于
The QPSC allows advanced configuration of the PTP shapers. Signed-off-by: NShalom Toledo <shalomt@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NPetr Machata <petrm@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shalom Toledo 提交于
Add note about disabling the PTP shaper when calling to mlxsw_sp_port_ets_maxrate_set(). Signed-off-by: NShalom Toledo <shalomt@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NPetr Machata <petrm@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shalom Toledo 提交于
The PTP Shaper field is used for enabling and disabling of port-rate based shaper which is slightly lower than port rate. Signed-off-by: NShalom Toledo <shalomt@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NPetr Machata <petrm@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YueHaibing 提交于
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/socionext/netsec.c: In function 'netsec_clean_tx_dring': drivers/net/ethernet/socionext/netsec.c:637:15: warning: variable 'pkts' set but not used [-Wunused-but-set-variable] It is not used since commit ba2b2321 ("net: netsec: add XDP support") Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Acked-by: NIlias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Kelam 提交于
Remove unneeded memset as alloc_etherdev is using kvzalloc which uses __GFP_ZERO flag Signed-off-by: NHariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fuqian Huang 提交于
Several drivers cast a struct device pointer to a struct platform_device pointer only to then call platform_get_drvdata(). To improve readability, these constructs can be simplified by using dev_get_drvdata() directly. Signed-off-by: NFuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fuqian Huang 提交于
Several drivers cast a struct device pointer to a struct platform_device pointer only to then call platform_get_drvdata(). To improve readability, these constructs can be simplified by using dev_get_drvdata() directly. Signed-off-by: NFuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 7月, 2019 4 次提交
-
-
由 René van Dorst 提交于
Both MTK_TRGMII_MT7621_CLK and MTK_PATH_BIT are defined as bit 10. This can causes issues on non-MT7621 devices which has the MTK_PATH_BIT(MTK_ETH_PATH_GMAC1_RGMII) and MTK_TRGMII capability set. The wrong TRGMII setup code can be executed. The current wrongly executed code doesn’t do any harm on MT7623 and the TRGMII setup for the MT7623 SOC side is done in MT7530 driver So it wasn’t noticed in the test. Move all capability bits in one enum so that they are all unique and easy to expand in the future. Because mtk_eth_path enum is merged in to mkt_eth_capabilities, the variable path value is no longer between 0 to number of paths, mtk_eth_path_name can’t be used anymore in this form. Convert the mtk_eth_path_name array to a function to lookup the pathname. The old code walked thru the mtk_eth_path enum, which is also merged with mkt_eth_capabilities. Expand array mtk_eth_muxc so it can store the name and capability bit of the mux. Convert the code so it can walk thru the mtk_eth_muxc array. Fixes: 8efaa653 ("net: ethernet: mediatek: Add MT7621 TRGMII mode support") Signed-off-by: NRené van Dorst <opensource@vdorst.com> v1->v2: - Move all capability bits in one enum, suggested by Willem de Bruijn - Convert the mtk_eth_path_name array to a function to lookup the pathname - Expand array mtk_eth_muxc so it can also store the name and capability bit of the mux - Updated commit message Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Weifeng Voon 提交于
Enable GMAC v4.xx and beyond to support 16KiB buffer. Signed-off-by: NWeifeng Voon <weifeng.voon@intel.com> Signed-off-by: NOng Boon Leong <boon.leong.ong@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vincent Bernat 提交于
Currently, gratuitous ARP/ND packets are sent every `miimon' milliseconds. This commit allows a user to specify a custom delay through a new option, `peer_notif_delay'. Like for `updelay' and `downdelay', this delay should be a multiple of `miimon' to avoid managing an additional work queue. The configuration logic is copied from `updelay' and `downdelay'. However, the default value cannot be set using a module parameter: Netlink or sysfs should be used to configure this feature. When setting `miimon' to 100 and `peer_notif_delay' to 500, we can observe the 500 ms delay is respected: 20:30:19.354693 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28 20:30:19.874892 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28 20:30:20.394919 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28 20:30:20.914963 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28 In bond_mii_monitor(), I have tried to keep the lock logic readable. The change is due to the fact we cannot rely on a notification to lower the value of `bond->send_peer_notif' as `NETDEV_NOTIFY_PEERS' is only triggered once every N times, while we need to decrement the counter each time. iproute2 also needs to be updated to be able to specify this new attribute through `ip link'. Signed-off-by: NVincent Bernat <vincent@bernat.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
The variable err is being assigned with a value that is never read and it is being updated in the next statement with a new value. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 7月, 2019 6 次提交
-
-
由 Colin Ian King 提交于
Currently the check to see if a page is allocated is incorrect and is checking if the pointer page is null, not *page as intended. Fix this. Addresses-Coverity: ("Dereference before null check") Fixes: f5cedc84 ("gve: Add transmit and receive support") Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
The variable err is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
The variable tpd_req is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sudarsana Reddy Kalluru 提交于
This patch adds driver changes to detect/timestamp the unicast PTP packets. Changes from previous version: ------------------------------- v2: Defined a macro for unicast ptp param mask. Please consider applying this to "net-next". Signed-off-by: NSudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: NAriel Elior <aelior@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Catherine Sullivan 提交于
u64_stats_fetch_begin needs to initialize start. Signed-off-by: NCatherine Sullivan <csully@google.com> Reported-by: Nkbuild test robot <lkp@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mahesh Bandewar 提交于
dev_init_scheduler() and dev_activate() expect the caller to hold RTNL. Since we don't want blackhole device to be initialized per ns, we are initializing at init. [ 3.855027] Call Trace: [ 3.855034] dump_stack+0x67/0x95 [ 3.855037] lockdep_rcu_suspicious+0xd5/0x110 [ 3.855044] dev_init_scheduler+0xe3/0x120 [ 3.855048] ? net_olddevs_init+0x60/0x60 [ 3.855050] blackhole_netdev_init+0x45/0x6e [ 3.855052] do_one_initcall+0x6c/0x2fa [ 3.855058] ? rcu_read_lock_sched_held+0x8c/0xa0 [ 3.855066] kernel_init_freeable+0x1e5/0x288 [ 3.855071] ? rest_init+0x260/0x260 [ 3.855074] kernel_init+0xf/0x180 [ 3.855076] ? rest_init+0x260/0x260 [ 3.855078] ret_from_fork+0x24/0x30 Fixes: 4de83b88 ("loopback: create blackhole net device similar to loopack.") Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: NMahesh Bandewar <maheshb@google.com> Tested-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 7月, 2019 8 次提交
-
-
由 Petr Machata 提交于
Before mlxsw_sp1_ptp_packet_finish() sends the packet back, it validates whether the corresponding port is still valid. However the condition is incorrect: when mlxsw_sp_port == NULL, the code dereferences the port to compare it to skb->dev. The condition needs to check whether the port is present and skb->dev still refers to that port (or else is NULL). If that does not hold, bail out. Add a pair of parentheses to fix the condition. Fixes: d92e4e6e ("mlxsw: spectrum: PTP: Support timestamping on Spectrum-1") Reported-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NPetr Machata <petrm@mellanox.com> Signed-off-by: NColin Ian King <colin.king@canonical.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Heiner Kallweit 提交于
It was reported that the GPD MicroPC is broken in a way that no valid MAC address can be read from the network chip. The vendor driver deals with this by assigning a random MAC address as fallback. So let's do the same. Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Heiner Kallweit 提交于
This reverts commit 759d0957. The patch was based on a misunderstanding. As Al Viro pointed out [0] it's simply wrong on big endian. So let's revert it. [0] https://marc.info/?t=156200975600004&r=1&w=2Reported-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Martin Blumenstingl 提交于
Commit 760f1dc2 ("net: stmmac: add sanity check to device_property_read_u32_array call") introduced error checking of the device_property_read_u32_array() call in stmmac_mdio_reset(). This results in the following error when the "snps,reset-delays-us" property is not defined in devicetree: invalid property snps,reset-delays-us This sanity check made sense until commit 84ce4d0f ("net: stmmac: initialize the reset delay array") ensured that there are fallback values for the reset delay if the "snps,reset-delays-us" property is absent. That was at the cost of making that property mandatory though. Drop the sanity check for device_property_read_u32_array() and thus make the "snps,reset-delays-us" property optional again (avoiding the error message while loading the stmmac driver with a .dtb where the property is absent). Fixes: 760f1dc2 ("net: stmmac: add sanity check to device_property_read_u32_array call") Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
A bonding master can be up while best_slave is NULL. [12105.636318] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [12105.638204] mlx4_en: eth1: Linkstate event 1 -> 1 [12105.648984] IP: bond_select_active_slave+0x125/0x250 [12105.653977] PGD 0 P4D 0 [12105.656572] Oops: 0000 [#1] SMP PTI [12105.660487] gsmi: Log Shutdown Reason 0x03 [12105.664620] Modules linked in: kvm_intel loop act_mirred uhaul vfat fat stg_standard_ftl stg_megablocks stg_idt stg_hdi stg elephant_dev_num stg_idt_eeprom w1_therm wire i2c_mux_pca954x i2c_mux mlx4_i2c i2c_usb cdc_acm ehci_pci ehci_hcd i2c_iimc mlx4_en mlx4_ib ib_uverbs ib_core mlx4_core [last unloaded: kvm_intel] [12105.685686] mlx4_core 0000:03:00.0: dispatching link up event for port 2 [12105.685700] mlx4_en: eth2: Linkstate event 2 -> 1 [12105.685700] mlx4_en: eth2: Link Up (linkstate) [12105.724452] Workqueue: bond0 bond_mii_monitor [12105.728854] RIP: 0010:bond_select_active_slave+0x125/0x250 [12105.734355] RSP: 0018:ffffaf146a81fd88 EFLAGS: 00010246 [12105.739637] RAX: 0000000000000003 RBX: ffff8c62b03c6900 RCX: 0000000000000000 [12105.746838] RDX: 0000000000000000 RSI: ffffaf146a81fd08 RDI: ffff8c62b03c6000 [12105.754054] RBP: ffffaf146a81fdb8 R08: 0000000000000001 R09: ffff8c517d387600 [12105.761299] R10: 00000000001075d9 R11: ffffffffaceba92f R12: 0000000000000000 [12105.768553] R13: ffff8c8240ae4800 R14: 0000000000000000 R15: 0000000000000000 [12105.775748] FS: 0000000000000000(0000) GS:ffff8c62bfa40000(0000) knlGS:0000000000000000 [12105.783892] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12105.789716] CR2: 0000000000000000 CR3: 0000000d0520e001 CR4: 00000000001626f0 [12105.796976] Call Trace: [12105.799446] [<ffffffffac31d387>] bond_mii_monitor+0x497/0x6f0 [12105.805317] [<ffffffffabd42643>] process_one_work+0x143/0x370 [12105.811225] [<ffffffffabd42c7a>] worker_thread+0x4a/0x360 [12105.816761] [<ffffffffabd48bc5>] kthread+0x105/0x140 [12105.821865] [<ffffffffabd42c30>] ? rescuer_thread+0x380/0x380 [12105.827757] [<ffffffffabd48ac0>] ? kthread_associate_blkcg+0xc0/0xc0 [12105.834266] [<ffffffffac600241>] ret_from_fork+0x51/0x60 Fixes: e2a7420d ("bonding/main: convert to using slave printk macros") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NJohn Sperbeck <jsperbeck@google.com> Cc: Jarod Wilson <jarod@redhat.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 René van Dorst 提交于
No reason to error out on a MT7621 device with DDR2 memory when non TRGMII mode is selected. Only MT7621 DDR2 clock setup is not supported for TRGMII mode. But non TRGMII mode doesn't need any special clock setup. Signed-off-by: NRené van Dorst <opensource@vdorst.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xue Chaojing 提交于
This patch removes standard netdev stats in ethtool -S. Suggested-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NXue Chaojing <xuechaojing@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jose Abreu 提交于
We support many speeds and it doesn't make much sense to list them all in the Kconfig. Let's just call it Multi-Gigabit. Suggested-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NJose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 7月, 2019 7 次提交
-
-
由 Catherine Sullivan 提交于
Add support for the following ethtool commands: ethtool -s|--change devname [msglvl N] [msglevel type on|off] ethtool -S|--statistics devname ethtool -i|--driver devname ethtool -l|--show-channels devname ethtool -L|--set-channels devname ethtool -g|--show-ring devname ethtool --reset devname Signed-off-by: NCatherine Sullivan <csully@google.com> Signed-off-by: NSagi Shahar <sagis@google.com> Signed-off-by: NJon Olson <jonolson@google.com> Acked-by: NWillem de Bruijn <willemb@google.com> Reviewed-by: NLuigi Rizzo <lrizzo@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Catherine Sullivan 提交于
Add support for the workqueue to handle management interrupts and support for resets. Signed-off-by: NCatherine Sullivan <csully@google.com> Signed-off-by: NSagi Shahar <sagis@google.com> Signed-off-by: NJon Olson <jonolson@google.com> Acked-by: NWillem de Bruijn <willemb@google.com> Reviewed-by: NLuigi Rizzo <lrizzo@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Catherine Sullivan 提交于
Add support for passing traffic. Signed-off-by: NCatherine Sullivan <csully@google.com> Signed-off-by: NSagi Shahar <sagis@google.com> Signed-off-by: NJon Olson <jonolson@google.com> Acked-by: NWillem de Bruijn <willemb@google.com> Reviewed-by: NLuigi Rizzo <lrizzo@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Catherine Sullivan 提交于
Add a driver framework for the Compute Engine Virtual NIC that will be available in the future. At this point the only functionality is loading the driver. Signed-off-by: NCatherine Sullivan <csully@google.com> Signed-off-by: NSagi Shahar <sagis@google.com> Signed-off-by: NJon Olson <jonolson@google.com> Acked-by: NWillem de Bruijn <willemb@google.com> Reviewed-by: NLuigi Rizzo <lrizzo@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mahesh Bandewar 提交于
Create a blackhole net device that can be used for "dead" dst entries instead of loopback device. This blackhole device differs from loopback in few aspects: (a) It's not per-ns. (b) MTU on this device is ETH_MIN_MTU (c) The xmit function is essentially kfree_skb(). and (d) since it's not registered it won't have ifindex. Lower MTU effectively make the device not pass the MTU check during the route check when a dst associated with the skb is dead. Signed-off-by: NMahesh Bandewar <maheshb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Kelam 提交于
Remove unneeded memset as alloc_etherdev is using kvzalloc which uses __GFP_ZERO flag Signed-off-by: NHariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilias Apalodimas 提交于
The interface only supports 1 Tx queue so locking is introduced on the Tx queue if XDP is enabled to make sure .ndo_start_xmit and .ndo_xdp_xmit won't corrupt Tx ring - Performance (SMMU off) Benchmark XDP_SKB XDP_DRV xdp1 291kpps 344kpps rxdrop 282kpps 342kpps - Performance (SMMU on) Benchmark XDP_SKB XDP_DRV xdp1 167kpps 324kpps rxdrop 164kpps 323kpps Signed-off-by: NIlias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: NJesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-