Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 19 9月, 2010 10 次提交
    • A
      alpha: deal with multiple simultaneously pending signals · 494486a1
      由 Al Viro 提交于 
      Unlike the other targets, alpha sets _one_ sigframe and
buggers off until the next syscall/interrupt, even if
more signals are pending.  It leads to quite a few unpleasant
inconsistencies, starting with SIGSEGV potentially arriving
not where it should and including e.g. mess with sigsuspend();
consider two pending signals blocked until sigsuspend()
unblocks them.  We pick the first one; then, if we are hit
by interrupt while in the handler, we process the second one
as well.  If we are not, and if no syscalls had been made,
we get out of the first handler and leave the second signal
pending; normally sigreturn() would've picked it anyway, but
here it starts with restoring the original mask and voila -
the second signal is blocked again.  On everything else we
get both delivered consistently.

It's actually easy to fix; the only thing to watch out for
is prevention of double syscall restart.  Fortunately, the
idea I've nicked from arm fix by rmk works just fine...

Testcase demonstrating the behaviour in question; on alpha
we get one or both flags set (usually one), on everything
else both are always set.
	#include <signal.h>
	#include <stdio.h>
	int had1, had2;
	void f1(int sig) { had1 = 1; }
	void f2(int sig) { had2 = 1; }
	main()
	{
		sigset_t set1, set2;
		sigemptyset(&set1);
		sigemptyset(&set2);
		sigaddset(&set2, 1);
		sigaddset(&set2, 2);
		signal(1, f1);
		signal(2, f2);
		sigprocmask(SIG_SETMASK, &set2, NULL);
		raise(1);
		raise(2);
		sigsuspend(&set1);
		printf("had1:%d had2:%d\n", had1, had2);
	}
Tested-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NMatt Turner <mattst88@gmail.com>
      494486a1
    • A
      alpha: fix a 14 years old bug in sigreturn tracing · 53293638
      由 Al Viro 提交于 
      The way sigreturn() is implemented on alpha breaks PTRACE_SYSCALL,
all way back to 1.3.95 when alpha has grown PTRACE_SYSCALL support.

What happens is direct return to ret_from_syscall, in order to bypass
mangling of a3 (error indicator) and prevent other mutilations of
registers (e.g. by syscall restart).  That's fine, but... the entire
TIF_SYSCALL_TRACE codepath is kept separate on alpha and post-syscall
stopping/notifying the tracer is after the syscall.  And the normal
path we are forcibly switching to doesn't have it.

So we end up with *one* stop in traced sigreturn() vs. two in other
syscalls.  And yes, strace is visibly broken by that; try to strace
the following
	#include <signal.h>
	#include <stdio.h>
	void f(int sig) {}
	main()
	{
		signal(SIGHUP, f);
		raise(SIGHUP);
		write(1, "eeeek\n", 6);
	}
and watch the show.  The
	close(1)                                = 405
in the end of strace output is coming from return value of write() (6 ==
__NR_close on alpha) and syscall number of exit_group() (__NR_exit_group ==
405 there).

The fix is fairly simple - the only thing we end up missing is the call
of syscall_trace() and we can tell whether we'd been called from the
SYSCALL_TRACE path by checking ra value.  Since we are setting the
switch_stack up (that's what sys_sigreturn() does), we have the right
environment for calling syscall_trace() - just before we call
undo_switch_stack() and return.  Since undo_switch_stack() will overwrite
s0 anyway, we can use it to store the result of "has it been called from
SYSCALL_TRACE path?" check.  The same thing applies in rt_sigreturn().
Tested-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NMatt Turner <mattst88@gmail.com>
      53293638
    • A
      alpha: unb0rk sigsuspend() and rt_sigsuspend() · 392fb6e3
      由 Al Viro 提交于 
      Old code used to set regs->r0 and regs->r19 to force the right
return value.  Leaving that after switch to ERESTARTNOHAND
was a Bad Idea(tm), since now that screws the restart - if we
hit the case when get_signal_to_deliver() returns 0, we will
step back to syscall insn, with v0 set to EINTR and a3 to 1.
The latter won't matter, since EINTR is 4, aka __NR_write.

Testcase:

	#include <signal.h>
	#define _GNU_SOURCE
	#include <unistd.h>
	#include <sys/syscall.h>

	main()
	{
		sigset_t mask;
		sigemptyset(&mask);
		sigaddset(&mask, SIGCONT);
		sigprocmask(SIG_SETMASK, &mask, NULL);
		kill(0, SIGCONT);
		syscall(__NR_sigsuspend, 1, "b0rken\n", 7);
	}

results on alpha in immediate message to stdout...

Fix is obvious; moreover, since we don't need regs anymore, we can
switch to normal prototypes for these guys and lose the wrappers.
Even better, rt_sigsuspend() is identical to generic version in
kernel/signal.c now.
Tested-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NMatt Turner <mattst88@gmail.com>
      392fb6e3
    • A
      alpha: belated ERESTART_RESTARTBLOCK race fix · 2deba1bd
      由 Al Viro 提交于 
      same thing as had been done on other targets back in 2003 -
move setting ->restart_block.fn into {rt_,}sigreturn().
Tested-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NMatt Turner <mattst88@gmail.com>
      2deba1bd
    • M
      alpha: Shift perf event pending work earlier in timer interrupt · bdc8b891
      由 Michael Cree 提交于 
      Pending work from the performance event subsystem is executed in
the timer interrupt.  This patch shifts the call to
perf_event_do_pending() before the call to update_process_times()
as the latter may call back into the perf event subsystem and it
is prudent to have the pending work executed first.
Signed-off-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NMatt Turner <mattst88@gmail.com>
      bdc8b891
    • M
      alpha: wire up fanotify and prlimit64 syscalls · 531f0474
      由 Mikael Pettersson 提交于 
      The 2.6.36-rc kernel added three new system calls:
fanotify_init, fanotify_mark, and prlimit64.  This
patch wires them up on Alpha.

Built and booted on an XP900.  Untested beyond that.
Signed-off-by: NMikael Pettersson <mikpe@it.uu.se>
Signed-off-by: NMatt Turner <mattst88@gmail.com>
      531f0474
    • A
      alpha: kill big kernel lock · 12e750d9
      由 Arnd Bergmann 提交于 
      All uses of the BKL on alpha are totally bogus, nothing
is really protected by this. Remove the remaining users
so we don't have to mark alpha as 'depends on BKL'.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: linux-alpha@vger.kernel.org
Signed-off-by: NMatt Turner <mattst88@gmail.com>
      12e750d9
    • T
      alpha: fix build breakage in asm/cacheflush.h · b97f897d
      由 Tejun Heo 提交于 
      Alpha SMP flush_icache_user_range() is implemented as an inline
function inside include/asm/cacheflush.h.  It dereferences @current
but doesn't include linux/sched.h and thus causes build failure if
linux/sched.h wasn't included previously.  Fix it by including the
needed header file explicitly.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NMatt Turner <mattst88@gmail.com>
      b97f897d
    • M
      alpha: remove unnecessary cast from void* in assignment. · af96f8a3
      由 matt mooney 提交于 
      Acked-by: NJan-Benedict Glaw <jbglaw@lug-owl.de>
Signed-off-by: Nmatt mooney <mfm@muteddisk.com>
Signed-off-by: NMatt Turner <mattst88@gmail.com>
      af96f8a3
    • J
      alpha: Use static const char * const where possible · 31019075
      由 Joe Perches 提交于 
      Acked-by: NRichard Henderson  <rth@twiddle.net>
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMatt Turner <mattst88@gmail.com>
      31019075
  3. 18 9月, 2010 6 次提交
  5. 17 9月, 2010 24 次提交