There are always questions about why CFQ is idling on various conditions.
Recent ones is Christoph asking again why to idle on REQ_NOIDLE. His
assertion is that XFS is relying more and more on workqueues and is
concerned that CFQ idling on IO from every workqueue will impact
XFS badly.

So he suggested that I add some more documentation about CFQ idling
and that can provide more clarity on the topic and also gives an
opprotunity to poke a hole in theory and lead to improvements.

So here is my attempt at that. Any comments are welcome.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Commit 5757a6d7 introduced a new rq_affinity = 2 so as to make
the request completed in the __make_request cpu. But it makes the
old rq_affinity = 1 not work any more. The root cause is that
if the 'cpu' and 'req->cpu' is in the same group and cpu != req->cpu,
ccpu will be the same as group_cpu, so the completion will be
excuted in the 'cpu' not 'group_cpu'.

This patch fix problem by simpling removing group_cpu and the codes
are more explicit now. If ccpu == cpu, we complete in cpu, otherwise
we raise_blk_irq to ccpu.

Cc: Christoph Hellwig <hch@infradead.org>
Cc: Roland Dreier <roland@purestorage.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: NTao Ma <boyu.mt@taobao.com>
Reviewed-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

of_device_id structures need a NULL terminating entry, add it.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Remove the (unsigned long long) cast in diskstats_show() and adjusts the
seq_printf() format string to 'unsigned long'

diskstats_show() uses part_stat_read() to get the stats, which either
accesses the specified field in the struct disk_stats directly (non SMP)
or sums up the per CPU values in a variable of the same type as the field,
so in any case the result will have the same type and range as the
specified field which for all disk_stats entries is unsigned long

Also, for unsigned long ranges the output of %lu should be identical to
the one of %llu, so no change in the actual proc entry contents.
Signed-off-by: NHerbert Poetzl <herbert@13thfloor.at>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

The report has an ISO which has a very long manufacturer ID.  It seems
that Linux is wrong, not the ISO maker.

Relax the check for the length of this field: emit a warning and truncate
the incoming data to 2048 bytes rather than rejecting the entire thing.

dvd_manufact.value isn't null-terminated.  I'm not even sure if it's a
string.  The kernel doesn't apepar to use it anyway.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=39062

Reported-by: <ale.goujon@gmail.com>
Tested-by: <ale.goujon@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

The buffer 'sc.cpu_mask' is a kernel buffer.  If bitmap_parse is used
instead of __bitmap_parse the extra parameter that indicates a kernel
buffer is not needed.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Lars Ellenberg <drbd-dev@lists.linbit.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Due to conflicts with the moduleh tree in linux-next, we
run into an include file mess. We really need export.h
in that tree, but if we add module.h locally then the
issue is easier to resolve.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

FQ keeps track of number of groups which are linked on blkcg->blkg_list.
This is useful to avoid races between queue exit and cgroup exit code
paths. So if at the request queue exit time linked group count is not
zero, that means there are some group out there which is yet to be
deleted under rcu read period and queue exit code should wait for
on rcu period.

In my previous patch I forgot to decrease the number of group count.
So in current form, we nr_blkcg_linked_grps is always non-zero and
we will always wait one rcu period (if BLK_CGROUP=y). The side effect
of this is that it can increase boot time. I am surprised, nobody
complained so far.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

read request is always sync. Using rw_is_sync() to determine
if a bio is sync.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

LOOP_CLR_FD takes lo->lo_ctl_mutex and tries to remove the loop sysfs
files. Sysfs calls show() and waits for lo->lo_ctl_mutex. LOOP_CLR_FD
waits for show() to finish to remove the sysfs file.

  cat /sys/class/block/loop0/loop/backing_file
    mutex_lock_nested+0x176/0x350
    ? loop_attr_do_show_backing_file+0x2f/0xd0 [loop]
    ? loop_attr_do_show_backing_file+0x2f/0xd0 [loop]
    loop_attr_do_show_backing_file+0x2f/0xd0 [loop]
    dev_attr_show+0x1b/0x60
    ? sysfs_read_file+0x86/0x1a0
    ? __get_free_pages+0x12/0x50
    sysfs_read_file+0xaf/0x1a0

  ioctl(LOOP_CLR_FD):
    wait_for_common+0x12c/0x180
    ? try_to_wake_up+0x2a0/0x2a0
    wait_for_completion+0x18/0x20
    sysfs_deactivate+0x178/0x180
    ? sysfs_addrm_finish+0x43/0x70
    ? sysfs_addrm_start+0x1d/0x20
    sysfs_addrm_finish+0x43/0x70
    sysfs_hash_and_remove+0x85/0xa0
    sysfs_remove_group+0x59/0x100
    loop_clr_fd+0x1dc/0x3f0 [loop]
    lo_ioctl+0x223/0x7a0 [loop]

Instead of taking the lo_ctl_mutex from sysfs code, take the inner
lo->lo_lock, to protect the access to the backing_file data.

Thanks to Tejun for help debugging and finding a solution.

Cc: Milan Broz <mbroz@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Cc: stable@kernel.org
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Instead of unconditionally creating a fixed number of dead loop
devices which need to be investigated by storage handling services,
even when they are never used, we allow distros start with 0
loop devices and have losetup(8) and similar switch to the dynamic
/dev/loop-control interface instead of searching /dev/loop%i for free
devices.
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Loop devices today have a fixed pre-allocated number of usually 8.
The number can only be changed at module init time. To find a free
device to use, /dev/loop%i needs to be scanned, and all devices need
to be opened until a free one is possibly found.

This adds a new /dev/loop-control device node, that allows to
dynamically find or allocate a free device, and to add and remove loop
devices from the running system:
 LOOP_CTL_ADD adds a specific device. Arg is the number
 of the device. It returns the device i or a negative
 error code.

 LOOP_CTL_REMOVE removes a specific device, Arg is the
 number the device. It returns the device i or a negative
 error code.

 LOOP_CTL_GET_FREE finds the next unbound device or allocates
 a new one. No arg is given. It returns the device i or a
 negative error code.

The loop kernel module gets automatically loaded when
/dev/loop-control is accessed the first time. The alias
specified in the module, instructs udev to create this
'dead' device node, even when the module is not loaded.

Example:
 cfd = open("/dev/loop-control", O_RDWR);

 # add a new specific loop device
 err = ioctl(cfd, LOOP_CTL_ADD, devnr);

 # remove a specific loop device
 err = ioctl(cfd, LOOP_CTL_REMOVE, devnr);

 # find or allocate a free loop device to use
 devnr = ioctl(cfd, LOOP_CTL_GET_FREE);

 sprintf(loopname, "/dev/loop%i", devnr);
 ffd = open("backing-file", O_RDWR);
 lfd = open(loopname, O_RDWR);
 err = ioctl(lfd, LOOP_SET_FD, ffd);

Cc: Tejun Heo <tj@kernel.org>
Cc: Karel Zak  <kzak@redhat.com>
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Replace the linked list, that keeps track of allocated devices, with an
idr index to allow a more efficient lookup of devices.

Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

This moves the FC classes bsg code to the block layer and
makes it a lib so that other classes like iscsi and SAS can use it.

It is helpful because working with the request queue, bios,
creating scatterlists, etc are a pain that the LLD does not
have to worry about with normal IOs and should not have to
worry about for bsg requests.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

* 'nfs-for-3.1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (28 commits)
  pnfsblock: write_pagelist handle zero invalid extents
  pnfsblock: note written INVAL areas for layoutcommit
  pnfsblock: bl_write_pagelist
  pnfsblock: bl_read_pagelist
  pnfsblock: cleanup_layoutcommit
  pnfsblock: encode_layoutcommit
  pnfsblock: merge rw extents
  pnfsblock: add extent manipulation functions
  pnfsblock: bl_find_get_extent
  pnfsblock: xdr decode pnfs_block_layout4
  pnfsblock: call and parse getdevicelist
  pnfsblock: merge extents
  pnfsblock: lseg alloc and free
  pnfsblock: remove device operations
  pnfsblock: add device operations
  pnfsblock: basic extent code
  pnfsblock: use pageio_ops api
  pnfsblock: add blocklayout Kconfig option, Makefile, and stubs
  pnfs: cleanup_layoutcommit
  pnfs: ask for layout_blksize and save it in nfs_server
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  slab: use NUMA_NO_NODE
  slab: remove one NR_CPUS dependency

* 'urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/writeback:
  don't busy retry the inode on failed grab_super_passive()

* git://git.infradead.org/battery-2.6:
  gpio-charger: Fix checking return value of request_any_context_irq
  power_supply: MAX17042: Support additional properties
  max8903_charger: Allow platform data to be __initdata
  power_supply: Add charger driver for MAX8998/LP3974
  power_supply: Add charger driver for MAX8997/8966
  max17042_battery: Remove obsolete cleanup for clientdata
  twl4030_charger: Fix warnings
  wm831x_power: Support multiple instances
  wm831x_backup: Support multiple instances
  apm_power: Fix style error in macros
  s3c_adc_battery: Fix annotation for s3c_adc_battery_probe()
  bq20z75: Enable detection after registering
  bq20z75: Add support for external notification

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/cpupowerutils:
  cpupower: Do detect IDA (opportunistic processor performance) via cpuid
  cpupower: Show Intel turbo ratio support via ./cpupower frequency-info
  cpupowerutils: increase MAX_LINE_LEN
  cpupower: Rename package from cpupowerutils to cpupower
  cpupowerutils: Rename: libcpufreq->libcpupower
  cpupowerutils: use kernel version-derived version string
  cpupowerutils: utils - ConfigStyle bugfixes
  cpupowerutils: helpers - ConfigStyle bugfixes
  cpupowerutils: idle_monitor - ConfigStyle bugfixes
  cpupowerutils: lib - ConfigStyle bugfixes
  cpupowerutils: bench - ConfigStyle bugfixes
  cpupowerutils: do not update po files on each and every compile
  cpupowerutils: remove ccdv, use kernel quiet/verbose mechanism
  cpupowerutils: use COPYING, CREDITS from top-level directory
  cpupowerutils - cpufrequtils extended with quite some features

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  smc91c92_cs.c: fix bogus compiler warning
  orinoco_cs: be more careful when matching cards with ID 0x0156:0x0002
  hostap_cs: support cards with "Version 01.02" as third product ID
  pcmcia: add PCMCIA_DEVICE_MANF_CARD_PROD_ID3
  pxa2xx pcmcia - stargate 2 use gpio array.
  pcmcia: pxa2xx: remove empty socket_init / socket_resume functions.
  drivers:pcmcia:soc_common: make socket_init and socket_suspend optional

For invalid extents, find other pages in the same fsblock and write them out.

[pnfsblock: write_begin]
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Note: When upper layer's read/write request cannot be fulfilled, the block
layout driver shouldn't silently mark the page as error. It should do
what can be done and  leave the rest to the upper layer. To do so, we
should set rdata/wdata->res.count properly.

When upper layer re-send the read/write request to finish the rest
part of the request, pgbase is the position where we should start at.

[pnfsblock: bl_write_pagelist support functions]
[pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS]
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
[pnfsblock: handle errors when read or write pagelist.]
Signed-off-by: NZhang Jingwang <yyalone@gmail.com>
[pnfs-block: use new write_pagelist api]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NJim Rees <rees@umich.edu>

[SQUASHME: pnfsblock: mds_offset is set in the generic layer]
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>

[pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED]
Signed-off-by: NPeng Tao <peng_tao@emc.com>
[pnfsblock: SQUASHME: adjust to API change]
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
[pnfsblock: fixup blksize alignment in bl_setup_layoutcommit]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
[pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS]
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
[pnfsblock: handle errors when read or write pagelist.]
Signed-off-by: NZhang Jingwang <yyalone@gmail.com>
[pnfs-block: use new write_pagelist api]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Note: When upper layer's read/write request cannot be fulfilled, the block
layout driver shouldn't silently mark the page as error. It should do
what can be done and  leave the rest to the upper layer. To do so, we
should set rdata/wdata->res.count properly.

When upper layer re-send the read/write request to finish the rest
part of the request, pgbase is the position where we should start at.

[pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED]
Signed-off-by: NPeng Tao <peng_tao@emc.com>
[pnfsblock: read path error handling]
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
[pnfsblock: handle errors when read or write pagelist.]
Signed-off-by: NZhang Jingwang <yyalone@gmail.com>
[pnfs-block: use new read_pagelist api]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

In blocklayout driver. There are two things happening
while layoutcommit/cleanup.
1. the modified extents are encoded.
2. On cleanup the extents are put back on the layout rw
   extents list, for reads.

In the new system where actual xdr encoding is done in
encode_layoutcommit() directly into xdr buffer, these are
the new commit stages:

1. On setup_layoutcommit, the range is adjusted as before
   and a structure is allocated for communication with
   bl_encode_layoutcommit && bl_cleanup_layoutcommit
   (Generic layer provides a void-star to hang it on)

2. bl_encode_layoutcommit is called to do the actual
   encoding directly into xdr. The commit-extent-list is not
   freed and is stored on above structure.
   FIXME: The code is not yet converted to the new XDR cleanup

3. On cleanup the commit-extent-list is put back by a call
   to set_to_rw() as before, but with no need for XDR decoding
   of the list as before. And the commit-extent-list is freed.
   Finally allocated structure is freed.

[rm inode and pnfs_layout_hdr args from cleanup_layoutcommit()]
Signed-off-by: NJim Rees <rees@umich.edu>
[pnfsblock: introduce bl_committing list]
Signed-off-by: NPeng Tao <peng_tao@emc.com>
[pnfsblock: SQUASHME: adjust to API change]
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
[blocklayout: encode_layoutcommit implementation]
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
[pnfsblock: fix bug setting up layoutcommit.]
Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn>
[pnfsblock: cleanup_layoutcommit wants a status parameter]
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

In blocklayout driver. There are two things happening
while layoutcommit/cleanup.
1. the modified extents are encoded.
2. On cleanup the extents are put back on the layout rw
   extents list, for reads.

In the new system where actual xdr encoding is done in
encode_layoutcommit() directly into xdr buffer, these are
the new commit stages:

1. On setup_layoutcommit, the range is adjusted as before
   and a structure is allocated for communication with
   bl_encode_layoutcommit && bl_cleanup_layoutcommit
   (Generic layer provides a void-star to hang it on)

2. bl_encode_layoutcommit is called to do the actual
   encoding directly into xdr. The commit-extent-list is not
   freed and is stored on above structure.
   FIXME: The code is not yet converted to the new XDR cleanup

3. On cleanup the commit-extent-list is put back by a call
   to set_to_rw() as before, but with no need for XDR decoding
   of the list as before. And the commit-extent-list is freed.
   Finally allocated structure is freed.

[rm inode and pnfs_layout_hdr args from cleanup_layoutcommit()]
[pnfsblock: get rid of deprecated xdr macros]
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
[blocklayout: encode_layoutcommit implementation]
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
[pnfsblock: fix bug setting up layoutcommit.]
Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn>
[pnfsblock: prevent commit list corruption]
[pnfsblock: fix layoutcommit with an empty opaque]
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Adds working implementations of various support functions
to handle INVAL extents, needed by writes, such as
bl_mark_sectors_init and bl_is_sector_init.

[pnfsblock: fix 64-bit compiler warnings for extent manipulation]
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
[Implement release_inval_marks]
Signed-off-by: NZhang Jingwang <zhangjingwang@nrchpc.ac.cn>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Implement bl_find_get_extent(), one of the core extent manipulation
routines.

[pnfsblock: Lookup list entry of layouts and tags in reverse order]
Signed-off-by: NZhang Jingwang <zhangjingwang@nrchpc.ac.cn>
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NJim Rees <rees@umich.edu>

pnfsblock: fix print format warnings for sector_t and size_t

gcc spews warnings about these on x86_64, e.g.:
fs/nfs/blocklayout/blocklayout.c:74: warning: format ‘%Lu’ expects type ‘long long unsigned int’, but argument 2 has type ‘sector_t’
fs/nfs/blocklayout/blocklayout.c:388: warning: format ‘%d’ expects type ‘int’, but argument 5 has type ‘size_t’
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

XDR decodes the block layout payload sent in LAYOUTGET result, storing
the result in an extent list.

[pnfsblock: get rid of deprecated xdr macros]
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
[pnfsblock: fix bug getting pnfs_layout_type in translate_devid().]
Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Call GETDEVICELIST during mount, then call and parse GETDEVICEINFO
for each device returned.

[pnfsblock: get rid of deprecated xdr macros]
Signed-off-by: NJim Rees <rees@umich.edu>
[pnfsblock: fix pnfs_deviceid references]
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
[pnfsblock: fix print format warnings for sector_t and size_t]
[pnfs-block: #include <linux/vmalloc.h>]
[pnfsblock: no PNFS_NFS_SERVER]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
[pnfsblock: fix bug determining size of striped volume]
[pnfsblock: fix oops when using multiple devices]
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
[pnfsblock: get rid of vmap and deviceid->area structure]
Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Replace a stub, so that extents underlying the layouts are properly
added, merged, or ignored as necessary.
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
[pnfsblock: delete the new node before put it]
Signed-off-by: NMingyang Guo <guomingyang@nrchpc.ac.cn>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
[pnfsblock: fix bug getting pnfs_layout_type in translate_devid().]
Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NZhang Jingwang <Jingwang.Zhang@emc.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
[upcall bugfixes]
Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
[upcall bugfixes]
Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Adds structures and basic create/delete code for extents.
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NZhang Jingwang <Jingwang.Zhang@emc.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

[pnfsblock: use pnfs_generic_pg_init_read/write]
Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Define a configuration variable to enable/disable compilation of the
block driver code.

Add the minimal structure for a pnfs block layout driver, and empty
list-heads that will hold the extent data

[pnfsblock: make NFS_V4_1 select PNFS_BLOCK]
Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
[pnfs-block: fix CONFIG_PNFS_BLOCK dependencies]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
[pnfsblock: SQUASHME: adjust to API change]
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
[pnfs: move pnfs_layout_type inline in nfs_inode]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
[blocklayout: encode_layoutcommit implementation]
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
[pnfsblock: layout alloc and free]
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
[pnfs: move pnfs_layout_type inline in nfs_inode]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
[pnfsblock: define module alias]
Signed-off-by: NPeng Tao <peng_tao@emc.com>
[rm inode and pnfs_layout_hdr args from cleanup_layoutcommit()]
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This gives layout driver a chance to cleanup structures they put in at
encode_layoutcommit.
Signed-off-by: NAndy Adamson <andros@netapp.com>
[fixup layout header pointer for layoutcommit]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
[rm inode and pnfs_layout_hdr args from cleanup_layoutcommit()]
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Block layout needs it to determine IO size.
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NTao Guo <glorioustao@gmail.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>