- 22 6月, 2021 1 次提交
-
-
由 Johannes Berg 提交于
If the TCM is present in the hardware (as advertised in the firmware file TLV data), dump its error log table during firmware error dumps. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210621103449.2d2149f6654f.Id831f8fbca59900ba7efc623ffca0ca938b664d3@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
- 14 4月, 2021 1 次提交
-
-
由 Roee Goldfiner 提交于
umac_error_table In TLV address was read using mask on MSB but on the same table in alive message it was without which caused mismatch in devices with different memory region MSB Signed-off-by: NRoee Goldfiner <roee.h.goldfiner@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411124417.179fee442115.Ib6eabe86cfda0b6044f07c07448c366b6e07e53d@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
- 10 2月, 2021 1 次提交
-
-
由 Takashi Iwai 提交于
The ucode TLV data may be read-only and should be treated as const pointers, but currently a few code forcibly cast to the writable pointer unnecessarily. This gave developers a wrong impression as if it can be modified, resulting in crashing regressions already a couple of times. This patch adds the const prefix to those cast pointers, so that such attempt can be caught more easily in future. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Acked-by: NLuca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20210112132449.22243-3-tiwai@suse.deSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
- 05 2月, 2021 1 次提交
-
-
由 Dror Moshe 提交于
Parse phy integration string from FW TLV. Signed-off-by: NDror Moshe <drorx.moshe@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210117164916.0c790e930484.I23ef2cb9c871e6adc4aab6be378f3811cb531155@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
- 12 12月, 2020 1 次提交
-
-
由 Gustavo A. R. Silva 提交于
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by replacing a /* fall through */ comment with the new pseudo-keyword macro fallthrough; instead of letting the code fall through to the next case. Notice that Clang doesn't recognize /* fall through */ comments as implicit fall-through markings. Link: https://github.com/KSPP/linux/issues/115Signed-off-by: NGustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: NKalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/edd98d194bfc98b4be93a9bdc303630b719c0e66.1605896060.git.gustavoars@kernel.org
-
- 10 12月, 2020 2 次提交
-
-
由 Johannes Berg 提交于
Use SPDX tags instead of the long copyright notices. Also cleanup some duplicate copyright notices and combine the years where possible. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201210000603.481bcb512a6f.I8146abe5a637079e7336209f23cb26af98b12b31@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Johannes Berg 提交于
If 12k A-MSDU size is requested, we will actually allocate 16k due to page allocation. Thus, change it to actually mean 16k, which is useful for certain sniffer use cases. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.84ae405829d4.I31184f4be31f7c3feb9a29aef3a111e70d15c64a@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
- 09 10月, 2020 1 次提交
-
-
由 Nathan Errera 提交于
FW is changing the max number of supported stations. To adapt to the change we get the max number from the TLV and act according to the new number. Signed-off-by: NNathan Errera <nathan.errera@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201008180656.863ab470babc.I393223392f36436663c4e66add03fefe77b74e60@changeid
-
- 08 10月, 2020 1 次提交
-
-
由 Lee Jones 提交于
Also demote a non-conforming kernel-doc function header. Fixes the following W=1 kernel build warning(s): drivers/net/wireless/intel/iwlwifi/iwl-drv.c:124: warning: Function parameter or member 'dbgfs_drv' not described in 'iwl_drv' drivers/net/wireless/intel/iwlwifi/iwl-drv.c:124: warning: Function parameter or member 'dbgfs_trans' not described in 'iwl_drv' drivers/net/wireless/intel/iwlwifi/iwl-drv.c:124: warning: Function parameter or member 'dbgfs_op_mode' not described in 'iwl_drv' drivers/net/wireless/intel/iwlwifi/iwl-drv.c:1329: warning: Function parameter or member 'ucode_raw' not described in 'iwl_req_fw_callback' drivers/net/wireless/intel/iwlwifi/iwl-drv.c:1329: warning: Function parameter or member 'context' not described in 'iwl_req_fw_callback' Cc: Johannes Berg <johannes.berg@intel.com> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Intel Linux Wireless <linuxwifi@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NKalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200910065431.657636-16-lee.jones@linaro.org
-
- 08 5月, 2020 2 次提交
-
-
由 Johannes Berg 提交于
Remove the outdated copyright, don't print it, and update the module author to actually be Intel, not Intel's copyright. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200425130140.dc86a4e9451a.Ice2e21b6427a4b57f953dba9ceb5b8b96b251a8c@changeid
-
由 Emmanuel Grumbach 提交于
This module parameter should not be mangled by users. This relates to a very old driver and I doubt people can really check the antenna coupling in a way that would make the BT Coexistence work better with a real value. Drop it. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200424182644.6e566897ce0a.I8395a50c1c39522e542366064bff33a33009ce7b@changeid
-
- 24 4月, 2020 1 次提交
-
-
由 Emmanuel Grumbach 提交于
This module parameter is no longer useful now that other debug infrastructure was added to iwlwifi. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200418110539.03bd49c3432b.Ie62047d3b364b19c8c3584ea37790220466f2a8d@changeid
-
- 21 4月, 2020 1 次提交
-
-
由 Chris Rorvick 提交于
Commit 71bc0334 ("iwlwifi: check allocated pointer when allocating conf_tlvs") attempted to fix a typoe introduced by commit 17b809c9 ("iwlwifi: dbg: move debug data to a struct") but does not implement the check correctly. Fixes: 71bc0334 ("iwlwifi: check allocated pointer when allocating conf_tlvs") Tweeted-by: @grsecurity Signed-off-by: NChris Rorvick <chris@rorvick.com> Signed-off-by: NSedat Dilek <sedat.dilek@gmail.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200417074558.12316-1-sedat.dilek@gmail.com
-
- 27 3月, 2020 1 次提交
-
-
由 Luca Coelho 提交于
Now that YoYo is more mature, we can enable it by default, so we collect data in the new way. Change-Id: Ic1a147f935286b085ca8bdb248a7493b7c6341ea Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
- 06 3月, 2020 1 次提交
-
-
由 Luca Coelho 提交于
We were erroneously checking the length of the tlv instead of checking the pointer returned by kmemdup() when allocating dbg_conf_tlv[]. This was probably a typo. Fix it by checking the returned pointer instead of the length. Reported-by: NMarkus Elfring <Markus.Elfring@web.de> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200306151128.06e00e6e980f.I9a890ce83493b79892a5f690d12016525317fa7e@changeid
-
- 04 1月, 2020 2 次提交
-
-
由 Johannes Berg 提交于
We have many different firmware images with the same version, and it's sometimes cumbersome to figure out which image was really used, especially as the marketing strings that we do print out can be the same for (slightly) different hardware using different firmware images. Incorporate the firmware filename into the fw_version so it's printed out all the time. Unfortunately, this will make the string be longer than the 32 characters for ethtool, but we almost never really use ethtool, so strip the "iwlwifi-" prefix (if not overridden), and the remaining data that may then be stripped at the end is not usually useful anyway. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Luca Coelho 提交于
Now that we don't have dynamically changing domains anymore, we can simply skip all the TLVs with domains that are not enabled. To do so, remove the checks from the functions that handle the TLVs when a timepoint is reached to the top allocation function. Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
- 24 12月, 2019 1 次提交
-
-
由 Luca Coelho 提交于
This is an old parameter that was used supposed to be used only when LAR was still under development. It should not be used anymore, but, since it's available, end-users have been mangling with it unnecessarily. In some cases it can cause problems because when LAR is supported the driver and the firmware do not expect it to be disabled. Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
- 15 11月, 2019 1 次提交
-
-
由 Johannes Berg 提交于
This is dead code, nothing uses the IWL_DEVICE_22560 macro and thus nothing every uses IWL_DEVICE_FAMILY_22560. Remove it all. While at it, remove some code and definitions used only in this case, and clean up some comments/names that still refer to it. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
- 25 10月, 2019 1 次提交
-
-
由 Shahar S Matityahu 提交于
In the new API implementation the driver does not keep the internal and external debug configurations in separate structs so the last configuration that is loaded overrides the previous ones (this is true only in some of the TLVs e.g. the buffer allocation TLV). Load the external configuration after the internal is loaded so that user configuration will override the default coming with the FW. Signed-off-by: NShahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
- 06 9月, 2019 7 次提交
-
-
由 Luca Coelho 提交于
Add a pointer to the iwl_trans structure and point it to the trans part of the cfg. This is the first step in disassociating the trans configuration from the rest of the configuration. Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Luca Coelho 提交于
In order to be able to select the cfg depending on the HW revision or on the RF ID, we need to set up the trans before selecting the cfg. To do so, move the elements from cfg that are needed by iwl_trans_alloc() to a separate struct at the top of the cfg, so it can be used by other cfg types as well, before selecting the rest of the configuration. Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Shahar S Matityahu 提交于
Debug flow TLV was removed from the FW. Remove the TLV from the driver as well. Signed-off-by: NShahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Shahar S Matityahu 提交于
Reimplement debug TLV allocation flow. The driver will check the validity of the debug TLVs prior allocating space for them. Any malformed or unsupported TLV will be skipped. The TLV specific checks will be added in later patches. Signed-off-by: NShahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Shahar S Matityahu 提交于
Use a linked list to maintain the debug TLVs instead of a single buffer. This way, the driver does not need to iterate over the binary file twice and allocates smaller chunks of memory. Also, in case one allocation fails the driver will work with the partial configuration instead of aborting the entire debug configuration. Signed-off-by: NShahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Shahar S Matityahu 提交于
align the naming to iwl_dbg_tlv_* Signed-off-by: NShahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Emmanuel Grumbach 提交于
Those are now effectless. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
- 31 7月, 2019 2 次提交
-
-
由 Shahar S Matityahu 提交于
The driver should call iwl_dbg_tlv_free even if debugfs is not defined since ini mode does not depend on debugfs ifdef. Signed-off-by: NShahar S Matityahu <shahar.s.matityahu@intel.com> Fixes: 68f6f492 ("iwlwifi: trans: support loading ini TLVs from external file") Signed-off-by: NLuca Coelho <luciano.coelho@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Shahar S Matityahu 提交于
ini debug mode should work even if debug override is not defined. Signed-off-by: NShahar S Matityahu <shahar.s.matityahu@intel.com> Fixes: 68f6f492 ("iwlwifi: trans: support loading ini TLVs from external file") Signed-off-by: NLuca Coelho <luciano.coelho@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 29 6月, 2019 4 次提交
-
-
由 Emmanuel Grumbach 提交于
FSEQ TLV should be parsed and read even when FMAC is not compiled. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Shahar S Matityahu 提交于
Unite iwl_trans debug related fields under iwl_trans_debug struct to increase readability and keep iwl_trans clean. Signed-off-by: NShahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Johannes Berg 提交于
When the module fails to initialize for some reason, it doesn't clean up properly. Fix that. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Shahar S Matityahu 提交于
Add support to debug info TLV. The TLV contains human readable naming of the FW image and the debug configuration. Signed-off-by: NShahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
- 01 6月, 2019 1 次提交
-
-
由 Jia-Ju Bai 提交于
In the error handling code of iwl_req_fw_callback(), iwl_dealloc_ucode() is called to free data. In iwl_drv_stop(), iwl_dealloc_ucode() is called again, which can cause double-free problems. To fix this bug, the call to iwl_dealloc_ucode() in iwl_req_fw_callback() is deleted. This bug is found by a runtime fuzzing tool named FIZZER written by us. Signed-off-by: NJia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
- 29 4月, 2019 1 次提交
-
-
由 Johannes Berg 提交于
In newer firmware images there's a command version TLV that states, for each listed command or notification, which version of the command and/or notification structure is used. Read and keep this data to be able to use it in the future. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
- 19 4月, 2019 1 次提交
-
-
由 Shahar S Matityahu 提交于
Add FW_INFO debug level. This level is enabled if INFO or FW debug levels are set. Also, set fw request and callback prints under this debug level. Signed-off-by: NShahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
- 21 2月, 2019 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Johannes Berg <johannes.berg@intel.com> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Intel Linux Wireless <linuxwifi@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
- 14 2月, 2019 3 次提交
-
-
由 Shahar S Matityahu 提交于
D3 debug data is disabled by default. Currently it is done by tampering the dump mask. Add an operation that will allow this to be changed without recompilation. Signed-off-by: NShahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Mordechay Goodstein 提交于
Add new API and TLV for the ability to send commands in the beginning and end of reset flow. The full flow of recovery is: 1. While loading FW, get address (from the TLV) of target buffer to read in case of reset 2. If an error/assert happens read the address data from step 1. 3. Reset the HW and load the FW. 4. Send the data read in step 2. 5. Add station keys 6. Send notification to FW that reset flow is done. The main use of the recovery flow is for support in PN/SN recovery when offloaded Signed-off-by: NMordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Shahar S Matityahu 提交于
TLV 54 holds umac debug related addresses. TLV 55 holds lmac debug related addresses. These TLVs aim to replace the alive notification data in the future. Parse and keep error table addresses received from the TLVs for both lmac and umac and use these addresses instead of the pointer received from alive notification. The feature supports only unified image. Signed-off-by: NShahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-