- 15 1月, 2011 6 次提交
-
-
由 Andiry Xu 提交于
Fix the more_trbs_coming field of queue_trb() in isoc transfer. Signed-off-by: NAndiry Xu <andiry.xu@amd.com> Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
-
由 Sarah Sharp 提交于
When xhci_discover_or_reset_device() is called after a host controller power loss, the virtual device may need to be reallocated. Make sure xhci_alloc_dev() uses GFP_NOIO. This avoid causing a deadlock by allowing the kernel to flush pending I/O while reallocating memory for a virtual device for a USB mass storage device that's holding the backing store for dirty memory buffers. This patch should be queued for the 2.6.37 stable tree. Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@kernel.org
-
由 Sarah Sharp 提交于
When there's an xHCI host power loss after a suspend from memory, the USB core attempts to reset and verify the USB devices that are attached to the system. The xHCI driver has to reallocate those devices, since the hardware lost all knowledge of them during the power loss. When a hub is plugged in, and the host loses power, the xHCI hardware structures are not updated to say the device is a hub. This is usually done in hub_configure() when the USB hub is detected. That function is skipped during a reset and verify by the USB core, since the core restores the old configuration and alternate settings, and the hub driver has no idea this happened. This bug makes the xHCI host controller reject the enumeration of low speed devices under the resumed hub. Therefore, make the USB core re-setup the internal xHCI hub device information by calling update_hub_device() when hub_activate() is called for a hub reset resume. After a host power loss, all devices under the roothub get a reset-resume or a disconnect. This patch should be queued for the 2.6.37 stable tree. Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@kernel.org
-
由 Zhang Rui 提交于
when unloading xhci_hcd, I got: [ 134.856813] xhci_hcd 0000:02:00.0: remove, state 4 [ 134.858140] usb usb3: USB disconnect, address 1 [ 134.874956] xhci_hcd 0000:02:00.0: Host controller not halted, aborting reset. [ 134.876351] BUG: sleeping function called from invalid context at kernel/mutex.c:85 [ 134.877657] in_atomic(): 0, irqs_disabled(): 1, pid: 1451, name: modprobe [ 134.878975] Pid: 1451, comm: modprobe Not tainted 2.6.37-rc5+ #162 [ 134.880298] Call Trace: [ 134.881602] [<ffffffff8104156a>] __might_sleep+0xeb/0xf0 [ 134.882921] [<ffffffff814763dc>] mutex_lock+0x24/0x50 [ 134.884229] [<ffffffff810a745c>] free_desc+0x2e/0x5f [ 134.885538] [<ffffffff810a74c8>] irq_free_descs+0x3b/0x71 [ 134.886853] [<ffffffff8102584d>] free_irq_at+0x31/0x36 [ 134.888167] [<ffffffff8102723f>] destroy_irq+0x69/0x71 [ 134.889486] [<ffffffff8102747a>] native_teardown_msi_irq+0xe/0x10 [ 134.890820] [<ffffffff8124c382>] default_teardown_msi_irqs+0x57/0x80 [ 134.892158] [<ffffffff8124be46>] free_msi_irqs+0x8b/0xe9 [ 134.893504] [<ffffffff8124cd46>] pci_disable_msix+0x35/0x39 [ 134.894844] [<ffffffffa01b444a>] xhci_cleanup_msix+0x31/0x51 [xhci_hcd] [ 134.896186] [<ffffffffa01b4b3a>] xhci_stop+0x3a/0x80 [xhci_hcd] [ 134.897521] [<ffffffff81341dd4>] usb_remove_hcd+0xfd/0x14a [ 134.898859] [<ffffffff813500ae>] usb_hcd_pci_remove+0x5c/0xc6 [ 134.900193] [<ffffffff8123c606>] pci_device_remove+0x3f/0x91 [ 134.901535] [<ffffffff812e7ea4>] __device_release_driver+0x83/0xd9 [ 134.902899] [<ffffffff812e8571>] driver_detach+0x86/0xad [ 134.904222] [<ffffffff812e7d56>] bus_remove_driver+0xb2/0xd8 [ 134.905540] [<ffffffff812e8633>] driver_unregister+0x6c/0x74 [ 134.906839] [<ffffffff8123c8e4>] pci_unregister_driver+0x44/0x89 [ 134.908121] [<ffffffffa01b940e>] xhci_unregister_pci+0x15/0x17 [xhci_hcd] [ 134.909396] [<ffffffffa01bd7d2>] xhci_hcd_cleanup+0xe/0x10 [xhci_hcd] [ 134.910652] [<ffffffff8107fcd1>] sys_delete_module+0x1ca/0x23b [ 134.911882] [<ffffffff81123932>] ? path_put+0x22/0x26 [ 134.913104] [<ffffffff8109a800>] ? audit_syscall_entry+0x2c/0x148 [ 134.914333] [<ffffffff8100ac82>] system_call_fastpath+0x16/0x1b [ 134.915658] xhci_hcd 0000:02:00.0: USB bus 3 deregistered [ 134.916465] xhci_hcd 0000:02:00.0: PCI INT A disabled and the same issue when xhci_suspend is invoked. (Note from Sarah: That's fixed by Andiry's patch before this, by synchronizing the irqs rather than freeing them on suspend.) Do not run xhci_cleanup_msix with irq disabled. This patch should be queued for the 2.6.37 stable tree. Signed-off-by: NZhang Rui <rui.zhang@intel.com> Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@kernel.org
-
由 Andiry Xu 提交于
Synchronize the interrupts instead of free them in xhci_suspend(). This will prevent a double free when the host is suspended and then the card removed. Set the flag hcd->msix_enabled when using MSI-X, and check the flag in suspend_common(). MSI-X synchronization will be handled by xhci_suspend(), and MSI/INTx will be synchronized in suspend_common(). This patch should be queued for the 2.6.37 stable tree. Reported-by: NMatthew Garrett <mjg@redhat.com> Signed-off-by: NAndiry Xu <andiry.xu@amd.com> Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@kernel.org
-
由 Sarah Sharp 提交于
The original code that resumed the USB bus on a port status change would only do so when there was a device connected to the port. If a device was just disconnected, the event would be queued for khubd, but khubd wouldn't run. That would leave the connect status change (CSC) bit set. If a USB device was plugged into that same port, the xHCI host controller would set the current connect status (CCS) bit. But since the CSC bit was already set, it would not generate an interrupt for a port status change event. That would mean the user could "Safely Remove" a device, have the bus suspend, disconnect the device, re-plug it in, and then the device would never be enumerated. Plugging in a different device on another port would cause the bus to resume, and khubd would notice the re-connected device. Running lsusb would also resume the bus, leading users to report the problem "went away" when using diagnostic tools. The solution is to resume the bus when a port status change event is received, regardless of the port status. Thank you very much to Maddog for helping me track down this Heisenbug. This patch should be queued for the 2.6.37 stable tree. Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: NJon 'maddog' Hall <maddog@li.org> Tested-by: NAndiry Xu <andiry.xu@amd.com> Cc: stable@kernel.org
-
- 11 1月, 2011 16 次提交
-
-
由 Linus Torvalds 提交于
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (30 commits) MAINTAINERS: Add tomoyo-dev-en ML. SELinux: define permissions for DCB netlink messages encrypted-keys: style and other cleanup encrypted-keys: verify datablob size before converting to binary trusted-keys: kzalloc and other cleanup trusted-keys: additional TSS return code and other error handling syslog: check cap_syslog when dmesg_restrict Smack: Transmute labels on specified directories selinux: cache sidtab_context_to_sid results SELinux: do not compute transition labels on mountpoint labeled filesystems This patch adds a new security attribute to Smack called SMACK64EXEC. It defines label that is used while task is running. SELinux: merge policydb_index_classes and policydb_index_others selinux: convert part of the sym_val_to_name array to use flex_array selinux: convert type_val_to_struct to flex_array flex_array: fix flex_array_put_ptr macro to be valid C SELinux: do not set automatic i_ino in selinuxfs selinux: rework security_netlbl_secattr_to_sid SELinux: standardize return code handling in selinuxfs.c SELinux: standardize return code handling in selinuxfs.c SELinux: standardize return code handling in policydb.c ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging由 Linus Torvalds 提交于
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: (44 commits) hwmon: Support for Dallas Semiconductor DS620 hwmon: driver for Sensirion SHT21 humidity and temperature sensor hwmon: Add humidity attribute to sysfs ABI hwmon: sysfs ABI updates hwmon: (via-cputemp) sync hotplug handling with coretemp/pkgtemp hwmon: (lm95241) Rewrite to avoid using macros hwmon: (applesmc) Fix checkpatch errors and fix value range checks hwmon: (applesmc) Update copyright information hwmon: (applesmc) Silence driver hwmon: (applesmc) Simplify feature sysfs handling hwmon: (applesmc) Dynamic creation of fan files hwmon: (applesmc) Extract all features generically hwmon: (applesmc) Handle new temperature format hwmon: (applesmc) Dynamic creation of temperature files hwmon: (applesmc) Introduce a register lookup table hwmon: (applesmc) Use pr_fmt and pr_<level> hwmon: (applesmc) Relax the severity of device init failure hwmon: (applesmc) Add MacBookAir3,1(3,2) support hwmon: (w83627hf) Use pr_fmt and pr_<level> hwmon: (w83627ehf) Use pr_fmt and pr_<level> ...
-
git://git.secretlab.ca/git/linux-2.6由 Linus Torvalds 提交于
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (29 commits) of/flattree: forward declare struct device_node in of_fdt.h ipmi: explicitly include of_address.h and of_irq.h sparc: explicitly cast negative phandle checks to s32 powerpc/405: Fix missing #{address,size}-cells in i2c node powerpc/5200: dts: refactor dts files powerpc/5200: dts: Change combatible strings on localbus powerpc/5200: dts: remove unused properties powerpc/5200: dts: rename nodes to prepare for refactoring dts files of/flattree: Update dtc to current mainline. of/device: Don't register disabled devices powerpc/dts: fix syntax bugs in bluestone.dts of: Fixes for OF probing on little endian systems of: make drivers depend on CONFIG_OF instead of CONFIG_PPC_OF of/flattree: Add of_flat_dt_match() helper function of_serial: explicitly include of_irq.h of/flattree: Refactor unflatten_device_tree and add fdt_unflatten_tree of/flattree: Reorder unflatten_dt_node of/flattree: Refactor unflatten_dt_node of/flattree: Add non-boottime device tree functions of/flattree: Add Kconfig for EARLY_FLATTREE ... Fix up trivial conflict in arch/sparc/prom/tree_32.c as per Grant.
-
由 Alexey Dobriyan 提交于
Remove kobject.h from files which don't need it, notably, sched.h and fs.h. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
Remove path.h from sched.h and other files. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen由 Linus Torvalds 提交于
* 'stable/bug-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/event: validate irq before get evtchn by irq xen/fb: fix potential memory leak xen/fb: fix xenfb suspend/resume race. xen: disable ACPI NUMA for PV guests xen/irq: Cleanup the find_unbound_irq
-
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen由 Linus Torvalds 提交于
* 'stable/generic' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: HVM X2APIC support apic: Move hypervisor detection of x2apic to hypervisor.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: slub: Fix a crash during slabinfo -v tracing/slab: Move kmalloc tracepoint out of inline code slub: Fix slub_lock down/up imbalance slub: Fix build breakage in Documentation/vm slub tracing: move trace calls out of always inlined functions to reduce kernel code size slub: move slabinfo.c to tools/slub/slabinfo.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6由 Linus Torvalds 提交于
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: Documentation/kbuild: add info that 'choice' can have a symbol name kbuild: add numeric --set-val option to scripts/config headers_check: Fix warning text headers_check: better search for functions in headers scripts/coccinelle: update for compatability with Coccinelle 0.2.4 tags: put function prototypes back! Kconfig: fix single letter command in scripts/config gitignore: add scripts/recordmcount
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6由 Linus Torvalds 提交于
* 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: deb-pkg: s/hdr/kernel_headers_/ && s/header/libc_headers_/ deb-pkg: Make deb-pkg generate a seperate linux-libc-dev deb kbuild: create linux-headers package in deb-pkg kbuild, deb-pkg: support overriding userland architecture kbuild, deb-pkg: select userland architecture based on UTS_MACHINE kbuild, deb-pkg: Fix build with paranoid umask
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6由 Linus Torvalds 提交于
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: nconf: handle comment entries within choice/endchoice kconfig: fix warning kconfig: Make expr_copy() take a const argument kconfig: simplify select-with-unmet-direct-dependency warning kconfig: add more S_INT and S_HEX consistency checks kconfig: fix `zconfdebug' extern declaration kconfig/conf: merge duplicate switch's case kconfig: fix typos kbuild/gconf: add dummy inline for bind_textdomain_codeset() kbuild/nconf: fix spaces damage kconfig: nuke second argument of conf_write_symbol() kconfig: do not define AUTOCONF_INCLUDED kconfig: the day kconfig warns about "select"-abuse has come
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6由 Linus Torvalds 提交于
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: mkuboot.sh: Fail if mkimage is missing gen_init_cpio: checkpatch fixes gen_init_cpio: Avoid race between call to stat() and call to open() modpost: Fix address calculation in reloc_location() Make fixdep error handling more explicit checksyscalls: Fix stand-alone usage modpost: Put .zdebug* section on white list kbuild: fix interaction of CONFIG_IKCONFIG and KCONFIG_CONFIG kbuild: export linux/{a.out,kvm,kvm_para}.h on headers_install_all kbuild: introduce HDR_ARCH_LIST for headers_install_all headers_install: check exit status of unifdef gen_init_cpio: remove leading `/' from file names scripts/genksyms: fix header usage fixdep: use hash table instead of a single array
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: pata_platform: Remove CONFIG_HAVE_PATA_PLATFORM's dependencies. pata_hpt37x: actually limit HPT370 to UltraDMA/66 pata_hpt3x2n: coding style cleanup pata_hpt37x: coding style cleanup pata_hpt366: coding style cleanup pata_hpt3x2n: calculate average f_CNT pata_hpt3x2n: clarify about HPT371N support pata_hpt{37x|3x2n}: SATA mode filtering [libata] avoid needlessly passing around ptr to SCSI completion func [libata] new driver acard_ahci, for ATP8620 host controller
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (34 commits) HID: roccat: Update sysfs attribute doc HID: roccat: don't use #pragma pack HID: roccat: Add support for Roccat Kone[+] v2 HID: roccat: reduce number of functions in kone and pyra drivers HID: roccat: declare meaning of pack pragma usage in driver headers HID: roccat: use class for char device for sysfs attribute creation sysfs: Introducing binary attributes for struct class HID: hidraw: add compatibility ioctl() for 32-bit applications. HID: hid-picolcd: Fix memory leak in picolcd_debug_out_report() HID: picolcd: fix misuse of logical operation in place of bitop HID: usbhid: base runtime PM on modern API HID: replace offsets values with their corresponding BTN_* defines HID: hid-mosart: support suspend/resume HID: hid-mosart: ignore buttons report HID: hid-picolcd: don't use flush_scheduled_work() HID: simplify an index check in hid_lookup_collection HID: Hoist assigns from ifs HID: Remove superfluous __inline__ HID: Use vzalloc for vmalloc/memset(,0...) HID: Add and use hid_<level>: dev_<level> equivalents ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: spi / PM: Support dev_pm_ops PM: Prototype the pm_generic_ operations PM / Runtime: Generic resume shouldn't set RPM_ACTIVE unconditionally PM: Use dev_name() in core device suspend and resume routines PM: Permit registration of parentless devices during system suspend PM: Replace the device power.status field with a bit field PM: Remove redundant checks from core device resume routines PM: Use a different list of devices for each stage of device suspend PM: Avoid compiler warning in pm_noirq_op() PM: Use pm_wakeup_pending() in __device_suspend() PM / Wakeup: Replace pm_check_wakeup_events() with pm_wakeup_pending() PM: Prevent dpm_prepare() from returning errors unnecessarily PM: Fix references to basic-pm-debugging.txt in drivers-testing.txt PM / Runtime: Add synchronous runtime interface for interrupt handlers (v3) PM / Hibernate: When failed, in_suspend should be reset PM / Hibernate: hibernation_ops->leave should be checked too Freezer: Fix a race during freezing of TASK_STOPPED tasks PM: Use proper ccflag flag in kernel/power/Makefile PM / Runtime: Fix comments to match runtime callback code
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: use split transaction timeout only for split transactions firewire: ohci: consolidate context status flags firewire: ohci: cache the context run bit firewire: ohci: flush AT contexts after bus reset - addendum firewire: ohci: flush AT contexts after bus reset for OHCI 1.2 firewire: net: set carrier state at ifup firewire: net: add carrier detection firewire: net: ratelimit error messages firewire: ohci: restart iso DMA contexts on resume from low power mode firewire: ohci: restore GUID on resume. firewire: ohci: use common buffer for self IDs and AR descriptors firewire: ohci: optimize iso context checks in the interrupt handler firewire: make PHY packet header format consistent firewire: ohci: properly clear posted write errors firewire: ohci: flush MMIO writes in the interrupt handler firewire: ohci: fix AT context initialization error handling firewire: ohci: Asynchronous Reception rewrite firewire: core: Update WARN uses firewire: nosy: char device is not seekable
-
- 10 1月, 2011 18 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: nilfs2: unfold nilfs_dat_inode function nilfs2: do not pass sbi to functions which can get it from inode nilfs2: get rid of nilfs_mount_options structure nilfs2: simplify nilfs_mdt_freeze_buffer nilfs2: get rid of loaded flag from nilfs object nilfs2: fix a checkpatch error in page.c nilfs2: fiemap support nilfs2: mark buffer heads as delayed until the data is written to disk nilfs2: call nilfs_error inside bmap routines fs/nilfs2/super.c: Use printf extension %pV MAINTAINERS: add nilfs2 git tree entry
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: use CreationTime like an i_generation field cifs: switch cifs_open and cifs_create to use CIFSSMBUnixSetFileInfo cifs: show "acl" in DebugData Features when it's compiled in cifs: move "ntlmssp" and "local_leases" options out of experimental code cifs: replace some hardcoded values with preprocessor constants cifs: remove unnecessary locking around sequence_number [CIFS] Fix minor merge conflict in fs/cifs/dir.c CIFS: Simplify cifs_open code CIFS: Simplify non-posix open stuff (try #2) CIFS: Add match_port check during looking for an existing connection (try #4) CIFS: Simplify ipv*_connect functions into one (try #4) cifs: Support NTLM2 session security during NTLMSSP authentication [try #5] cifs: don't overwrite dentry name in d_revalidate
-
由 Joe Jin 提交于
When retrieving the event channel number from irq, the irq number may not be valid under some conditions. So far that can be when we suspend/resume and irq ends with -1. Validate and return sanitized irq and provide diagnostics information. [v3: added unlikely on the WARN path] [v2: reworded the commit message] Signed-off-by: NJoe Jin <joe.jin@oracle.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: NGurudas Pai <gurudas.pai@oracle.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Andrew Morton <akpm@linux-foundation.org>
-
由 Joe Jin 提交于
This patch fixes a potential memory leak when xenfb connect to the backend fails. Thanks for Ian's review and comments. [v2: reworded the commit message a bit] Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NJoe Jin <joe.jin@oracle.com> Tested-by: NGurudas Pai <gurudas.pai@oracle.com> Acked-by: NIan Campbell <ian.campbell@citrix.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Andrew Morton <akpm@linux-foundation.org>
-
由 Joe Jin 提交于
When migrating guests over a long period we hit this: <1>BUG: unable to handle kernel paging request at 0000000b819fdb98 <1>IP: [<ffffffff812a588f>] notify_remote_via_irq+0x13/0x34 <4>PGD 94b10067 PUD 0 <0>Oops: 0000 [#1] SMP .. snip.. Call Trace: [<ffffffff812712c9>] xenfb_send_event+0x5c/0x5e [<ffffffff8100ea5f>] ? xen_restore_fl_direct_end+0x0/0x1 [<ffffffff81438d80>] ? _spin_unlock_irqrestore+0x16/0x18 [<ffffffff812714ee>] xenfb_refresh+0x1b1/0x1d7 [<ffffffff81270568>] ? sys_imageblit+0x1ac/0x458 [<ffffffff81271786>] xenfb_imageblit+0x2f/0x34 [<ffffffff8126a3e5>] soft_cursor+0x1b5/0x1c8 [<ffffffff8126a137>] bit_cursor+0x4b6/0x4d7 [<ffffffff8100ea5f>] ? xen_restore_fl_direct_end+0x0/0x1 [<ffffffff81438d80>] ? _spin_unlock_irqrestore+0x16/0x18 [<ffffffff81269c81>] ? bit_cursor+0x0/0x4d7 [<ffffffff812656b7>] fb_flashcursor+0xff/0x111 [<ffffffff812655b8>] ? fb_flashcursor+0x0/0x111 [<ffffffff81071812>] worker_thread+0x14d/0x1ed [<ffffffff81075a8c>] ? autoremove_wake_function+0x0/0x3d [<ffffffff81438d80>] ? _spin_unlock_irqrestore+0x16/0x18 [<ffffffff810716c5>] ? worker_thread+0x0/0x1ed [<ffffffff810756e3>] kthread+0x6e/0x76 [<ffffffff81012dea>] child_rip+0xa/0x20 [<ffffffff81011fd1>] ? int_ret_from_sys_call+0x7/0x1b [<ffffffff8101275d>] ? retint_restore_args+0x5/0x6 [<ffffffff81012de0>] ? child_rip+0x0/0x20 Code: 6b ff 0c 8b 87 a4 db 9f 81 66 85 c0 74 08 0f b7 f8 e8 3b ff ff ff c9 c3 55 48 89 e5 48 83 ec 10 0f 1f 44 00 00 89 ff 48 6b ff 0c <8b> 87 a4 db 9f 81 66 85 c0 74 14 48 8d 75 f0 0f b7 c0 bf 04 00 RIP [<ffffffff812a588f>] notify_remote_via_irq+0x13/0x34 RSP <ffff8800e7bf7bd0> CR2: 0000000b819fdb98 ---[ end trace 098b4b74827595d0 ]--- The root cause of the panic is the race between the resume and reconnect to the backend. Clearing the 'update_wanted' flag of xenfb before disconnecting from the backend fixes this issue. Signed-off-by: NJoe Jin <joe.jin@oracle.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: NGurudas Pai <gurudas.pai@oracle.com> Acked-by: NIan Campbell <ian.campbell@citrix.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Andrew Morton <akpm@linux-foundation.org>
-
由 Ian Campbell 提交于
Xen does not currently expose PV-NUMA information to PV guests. Therefore disable NUMA for the time being to prevent the kernel picking up on an host-level NUMA information which it might come across in the firmware. [ Added comment - Jeremy ] Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm: dlm: sanitize work_start() in lowcomms.c dlm: reduce cond_resched during send dlm: use TCP_NODELAY dlm: Use cmwq for send and receive workqueues dlm: Handle application limited situations properly.
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: fix ioctl ABI fuse: allow batching of FORGET requests fuse: separate queue for FORGET requests fuse: ioctl cleanup Fix up trivial conflict in fs/fuse/inode.c due to RCU lookup having done the RCU-freeing of the inode in fuse_destroy_inode().
-
由 Randy Dunlap 提交于
Fix kernel-doc notation warnings in pipe_fs_i.h: Warning(include/linux/pipe_fs_i.h:58): No description found for parameter 'buffers' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix new kernel-doc notation warning in hrtimer.h: Warning(include/linux/hrtimer.h:150): Excess struct/union/enum/typedef member 'first' description in 'hrtimer_clock_base' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix new kernel-doc notation warning in dcache.h: Warning(include/linux/dcache.h:316): Excess function parameter 'Returns' description in '__d_rcu_to_refcount' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Nick Piggin <npiggin@kernel.dk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix new kernel-doc notation warnings in fs/namei.c and spell ECHILD correctly. Warning(fs/namei.c:218): No description found for parameter 'flags' Warning(fs/namei.c:425): Excess function parameter 'Returns' description in 'nameidata_drop_rcu' Warning(fs/namei.c:478): Excess function parameter 'Returns' description in 'nameidata_dentry_drop_rcu' Warning(fs/namei.c:540): Excess function parameter 'Returns' description in 'nameidata_drop_rcu_last' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Nick Piggin <npiggin@kernel.dk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ryusuke Konishi 提交于
nilfs_dat_inode function was a wrapper to switch between normal dat inode and gcdat, a clone of the dat inode for garbage collection. This function got obsolete when the gcdat inode was removed, and now we can access the dat inode directly from a nilfs object. So, we will unfold the wrapper and remove it. Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
-
由 Ryusuke Konishi 提交于
This removes argument for passing nilfs_sb_info structure from nilfs_set_file_dirty and nilfs_load_inode_block functions. We can get a pointer to the structure from inodes. [Stephen Rothwell <sfr@canb.auug.org.au>: fix conflict with commit b74c79e9] Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
-
由 Ryusuke Konishi 提交于
Only mount_opt member is used in the nilfs_mount_options structure, and we can simplify it. Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
-
由 Ryusuke Konishi 提交于
nilfs_page_get_nth_block() function used in nilfs_mdt_freeze_buffer() always returns a valid buffer head, so its validity check can be removed. Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
-
由 Ryusuke Konishi 提交于
NILFS_LOADED flag of the nilfs object is not used now, so this will remove it. Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
-
由 Ryusuke Konishi 提交于
Will correct the following checkpatch error: ERROR: trailing whitespace #494: FILE: page.c:494: + $ Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
-