The #PF with PFEC.RSV = 1 is designed to speed MMIO emulation, however,
it is possible that the RSV #PF is caused by real BUG by mis-configure
shadow page table entries

This patch enables full check for the zero bits on shadow page table
entries (which includes not only bits reserved by the hardware, but also
bits that will never be set in the SPTE), then dump the shadow page table
hierarchy.
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We have the same data struct to check reserved bits on guest page tables
and shadow page tables, split is_rsvd_bits_set() so that the logic can be
shared between these two paths
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We have abstracted the data struct and functions which are used to check
reserved bit on guest page tables, now we extend the logic to check
zero bits on shadow page tables

The zero bits on sptes include not only reserved bits on hardware but also
the bits that SPTEs willnever use.  For example, shadow pages will never
use GB pages unless the guest uses them too.
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Since shadow ept page tables and Intel nested guest page tables have the
same format, split reset_rsvds_bits_mask_ept so that the logic can be
reused by later patches which check zero bits on sptes
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Since softmmu & AMD nested shadow page tables and guest page tables have
the same format, split reset_rsvds_bits_mask so that the logic can be
reused by later patches which check zero bits on sptes
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

These two fields, rsvd_bits_mask and bad_mt_xwr, in "struct kvm_mmu" are
used to check if reserved bits set on guest ptes, move them to a data
struct so that the approach can be applied to check host shadow page
table entries as well
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

FNAME(is_rsvd_bits_set) does not depend on guest mmu mode, move it
to mmu.c to stop being compiled multiple times
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We got the bug that qemu complained with "KVM: unknown exit, hardware
reason 31" and KVM shown these info:
[84245.284948] EPT: Misconfiguration.
[84245.285056] EPT: GPA: 0xfeda848
[84245.285154] ept_misconfig_inspect_spte: spte 0x5eaef50107 level 4
[84245.285344] ept_misconfig_inspect_spte: spte 0x5f5fadc107 level 3
[84245.285532] ept_misconfig_inspect_spte: spte 0x5141d18107 level 2
[84245.285723] ept_misconfig_inspect_spte: spte 0x52e40dad77 level 1

This is because we got a mmio #PF and the handler see the mmio spte becomes
normal (points to the ram page)

However, this is valid after introducing fast mmio spte invalidation which
increases the generation-number instead of zapping mmio sptes, a example
is as follows:
1. QEMU drops mmio region by adding a new memslot
2. invalidate all mmio sptes
3.

        VCPU 0                        VCPU 1
    access the invalid mmio spte
                            access the region originally was MMIO before
                            set the spte to the normal ram map

    mmio #PF
    check the spte and see it becomes normal ram mapping !!!

This patch fixes the bug just by dropping the check in mmio handler, it's
good for backport. Full check will be introduced in later patches
Reported-by: NPavel Shirshov <ru.pchel@gmail.com>
Tested-by: NPavel Shirshov <ru.pchel@gmail.com>
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The patch was munged on commit to re-order these tests resulting in
excessive warnings when trying to do device assignment.  Return to
original ordering: https://lkml.org/lkml/2015/7/15/769

Fixes: 3e5d2fdc ("KVM: MTRR: simplify kvm_mtrr_get_guest_memory_type")
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Reviewed-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The memory barriers are trying to protect against concurrent RCU-based
interrupt injection, but the IRQ routing table is not valid at the time
kvm->arch.vpic is written.  Fix this by writing kvm->arch.vpic last.
kvm_destroy_pic then need not set kvm->arch.vpic to NULL; modify it
to take a struct kvm_pic* and reuse it if the IOAPIC creation fails.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

There is no smp_rmb matching the smp_wmb.  shared_msr_update is called from
hardware_enable, which in turn is called via on_each_cpu.  on_each_cpu
and must imply a read memory barrier (on x86 the rmb is achieved simply
through asm volatile in native_apic_mem_write).
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This is another remnant of ia64 support.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvm-s390-next-20150728' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-next

KVM: s390: Fixes and features for kvm/next (4.3)

1. Rework logging infrastructure (s390dbf) to integrate feedback learned
   when debugging performance and test issues
2. Some cleanups and simplifications for CMMA handling
3. Fix gdb debugging and single stepping on some instructions
4. Error handling for storage key setup

Depending on user space, some capabilities and vm attributes are
enabled at runtime. Let's log those events and while we're at it,
log querying the vm attributes as well.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

In addition to the per VM debug logs, let's provide a global
one for KVM-wide events, like new guests or fatal errors.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>

Use the default log level 3 for state changing and/or seldom events,
use 4 for others. Also change some numbers from %x to %d and vice versa
to match documentation. If hex, let's prepend the numbers with 0x.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>

We do not use the exception logger, so the 2nd area is unused.
Just have one area that is bigger (32 pages).
At the same time we can limit the debug feature size to 7
longs, as the largest user has 3 parameters + string + boiler
plate (vCPU, PSW mask, PSW addr)
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>

The old Documentation/s390/kvm.txt file is either
outdated or described in Documentation/virtual/kvm/api.txt.
Let's get rid of it.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>

This patch adds names for missing irq types to the trace events.
In order to identify adapter irqs, the define is moved from
interrupt.c to the other basic irq defines in uapi/linux/kvm.h.
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

This reworks the debug logging for interrupt related logs.
Several changes:
- unify program int/irq
- improve decoding (e.g. use mcic instead of parm64 for machine
  check injection)
- remove useless interrupt type number (the name is enough)
- rename "interrupt:" to "deliver:" as the other side is called "inject"
- use log level 3 for state changing and/or seldom events (like machine
  checks, restart..)
- use log level 4 for frequent events
- use 0x prefix for hex numbers
- add pfault done logging
- move some tracing outside spinlock
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NJens Freimann <jfrei@linux.vnet.ibm.com>

We're not only interested in the address of the control block, but
also in the requested subcommand and for the token subcommand, in the
specified token address and masks.
Suggested-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>

The "from user"/"from kernel" part of the log/trace messages is not
always correct anymore and therefore not really helpful.

Let's remove that part from the log + trace messages. For program
interrupts, we can now move the logging/tracing part into the real
injection function, as already done for the other injection functions.
Reviewed-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

SPX (SET PREFIX)  and SIGP (Set prefix) can change the prefix
register of a CPU. As sigp set prefix may be handled in user
space (KVM_CAP_S390_USER_SIGP), we would not log the changes
triggered via SIGP in that case. Let's have just one VCPU_EVENT
at the central location that tracks prefix changes.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>

Let's add a vcpu event for the page reference handling and change
the default debugging level for the ipl diagnose. Both are not
frequent AND change the global state, so lets log them always.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Sometimes kvm stat counters are the only performance metric to check
after something went wrong. Let's add additional counters for some
diagnoses.

In addition do the count for diag 10 all the time, even if we inject
a program interrupt.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NJens Freimann <jfrei@linux.vnet.ibm.com>

There is no point in resetting the CMMA state if it was never enabled.
Signed-off-by: NDominik Dingel <dingel@linux.vnet.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

As we already only enable CMMA when userspace requests it, we can
safely move the additional checks to the request handler and avoid
doing them multiple times. This also tells userspace if CMMA is
available.
Signed-off-by: NDominik Dingel <dingel@linux.vnet.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

When guest debugging is active, space-switch events might be enforced
by PER. While the PER events are correctly filtered out,
space-switch-events could be forwarded to the guest, although from a
guest point of view, they should not have been reported.

Therefore we have to filter out space-switch events being concurrently
reported with a PER event, if the PER event got filtered out. To do so,
we theoretically have to know which instruction was responsible for the
event. As the applicable instructions modify the PSW address, the
address space set in the PSW and even the address space in cr1, we
can't figure out the instruction that way.

For this reason, we have to rely on the information about the old and
new address space, in order to guess the responsible instruction type
and do appropriate checks for space-switch events.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

As enabling storage keys might fail, we should forward the error.
Signed-off-by: NDominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

We can disable CD unconditionally when there is no assigned device.
KVM now forces guest PAT to all-writeback in that case, so it makes
sense to also force CR0.CD=0.

When there are assigned devices, emulate cache-disabled operation
through the page tables.  This behavior is consistent with VMX
microcode, where CD/NW are not touched by vmentry/vmexit.  However,
keep this dependent on the quirk because OVMF enables the caches
too late.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Allow a nested hypervisor to single step its guests.
Signed-off-by: NMihai Donțu <mihai.dontu@gmail.com>
[Fix overlong line. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Sending of notification is done by exiting vcpu to user space
if KVM_REQ_HV_CRASH is enabled for vcpu. At exit to user space
the kvm_run structure contains system_event with type
KVM_SYSTEM_EVENT_CRASH to notify about guest crash occurred.
Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Reviewed-by: NPeter Hornyack <peterhornyack@google.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Gleb Natapov <gleb@kernel.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Added kvm Hyper-V context hv crash variables as storage
of Hyper-V crash msrs.
Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Reviewed-by: NPeter Hornyack <peterhornyack@google.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Gleb Natapov <gleb@kernel.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

vcpu_debug is useful macro like kvm_debug but additionally
includes vcpu context inside output.
Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Reviewed-by: NPeter Hornyack <peterhornyack@google.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Gleb Natapov <gleb@kernel.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch introduce Hyper-V related source code file - hyperv.c and
per vm and per vcpu hyperv context structures.
All Hyper-V MSR's and hypercall code moved into hyperv.c.
All Hyper-V kvm/vcpu fields moved into appropriate hyperv context
structures. Copyrights and authors information copied from x86.c
to hyperv.c.
Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Reviewed-by: NPeter Hornyack <peterhornyack@google.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Gleb Natapov <gleb@kernel.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

According to Intel SDM several checks must be applied for memory operands
of VMX instructions.

Long mode: #GP(0) or #SS(0) depending on the segment must be thrown
if the memory address is in a non-canonical form.

Protected mode, checks in chronological order:
- The segment type must be checked with access type (read or write) taken
into account.
	For write access: #GP(0) must be generated if the destination operand
		is located in a read-only data segment or any code segment.
	For read access: #GP(0) must be generated if if the source operand is
		located in an execute-only code segment.
- Usability of the segment must be checked. #GP(0) or #SS(0) depending on the
	segment must be thrown if the segment is unusable.
- Limit check. #GP(0) or #SS(0) depending on the segment must be
	thrown if the memory operand effective address is outside the segment
	limit.
Signed-off-by: NEugene Korenevsky <ekorenevsky@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Make them clearly architecture-dependent; the capability is valid for
all architectures, but the argument is not.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

OVMF depends on WB to boot fast, because it only clears caches after
it has set up MTRRs---which is too late.

Let's do writeback if CR0.CD is set to make it happy, similar to what
SVM is already doing.
Signed-off-by: NXiao Guangrong <guangrong.xiao@intel.com>
Tested-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The logic of the disabled_quirks field usually results in a double
negation.  Wrap it in a simple function that checks the bit and
negates it.

Based on a patch from Xiao Guangrong.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>