- 03 2月, 2008 40 次提交
-
-
由 Borislav Petkov 提交于
Bart: - remove 'capabilities->speed' chunk - re-add brackets to block_descrp assignment Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
Bart: - remove unnecessary comment change - remove two needless "!!" Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
Also, cleanup whitespace and update comments. Bart: - remove reference to drivers/block/ide.c - move driver documentation to Documentation/ide/ide-tape.txt Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
No reason to use ide_init_hwif_ports() in ide-cs (as a nice side-effect this makes ide-cs work on archs that don't define IDE_ARCH_OBSOLETE_INIT). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Move check_dma_crc() to ide-dma.c and add inline version for CONFIG_BLK_DEV_IDEDMA=n case. * Rename check_dma_crc() to ide_check_dma_crc(). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
While at it: * Remove needless '!drive->crc_count' check. Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
SELECT_DRIVE() is called by IDE core code in start_request() before device driver's ->do_request method. In ide-scsi case ->do_request is implemented by idescsi_do_request() which is also the only user of idescsi_issue_pc(). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Use __ide_set_handler() in ide_execute_command(). While at it: * Fix whitespace damage in ide_execute_command(). Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* siimage.c: use hwif->sata_scr[SATA_{ERROR,STATUS}_OFFSET] instead of SATA_{ERROR,STATUS}_REG macros. * Remove no longer needed SATA_*_REG macros. While at it: * Remove needless SATA Status register read from sil_sata_reset_poll(). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* ->nice0 and ->nice2 ide_drive_t fields are always zero so remove them. * IDE_NICE_0 and IDE_NICE_2 defines from <linux/hdreg.h> are no longer used by any kernel code so cover them with #ifndef/#endif __KERNEL__. Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Cache value read from the Status register in 'stat' variable in do_probe() and enable_nest(), then remove remove needless Status register reads. While at it: * Add proper KERN_* levels to printk() calls. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Un-static create_proc_ide_drives() and call it from ide_device_add_all(). While at it: * Rename create_proc_ide_drives() to ide_proc_port_register_devices(). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Move hwif->present check out from ide_proc_register_port() to ide_device_add_all(). There should be no functionality changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Factor out devices setup from ide_acpi_init() to ide_acpi_port_init_devices(). * Call ide_acpi_port_init_devices() in ide_device_add_all(). While at it: * Remove no longer needed 'drive' field from struct ide_acpi_drive_link. There should be no functionality changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
These pointers are always setup in ide_acpi_init(). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
There should be no functionality changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Factor out devices setup from init_irq() to ide_port_setup_devices(). While at it: * Do devices setup after printing port information. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Factor out adding drive to hwgroup from init_irq() to ide_add_drive_to_hwgroup(). There should be no functionality changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Move hwif->rqsize init from ide_init_queue() to init_irq(). There should be no functionality changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
There should be no functionality changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
There should be no functionality changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Move blk_register_region() call out from init_gendisk() to hwif_init(). There should be no functionality changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
No need to initialize drive->gendev and waste memory on IDE settings for not present devices. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Add ->port_init_devs method to ide_hwif_t for a host specific initialization of devices on a port. Call the new method from ide_port_init_devices(). * Convert ht6560b, qd65xx and opti621 host drivers to use the new ->port_init_devs method. There should be no functionality changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Use the same bit for IDE_HFLAG_CS5520 and IDE_HFLAG_VDMA host flags (both are used only by cs5520 host driver currently). * Add IDE_HFLAG_NO_IO32_BIT host flag and use it instead of ->no_io_32bit ide_hwif_t field. * Add IDE_HFLAG_NO_UNMASK_IRQS host flag, then convert dtc2278 and rz1000 host drivers to use it. There should be no functionality changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Factor out code initializing devices from ide_init_port() to ide_port_init_devices(). * Call the new function from ide_device_add_all(). There should be no functionality changes caused by this patch. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
bast-ide.c/ide-cs.c/delkin_cb.c: * Don't set 'restore' flag for ide_unregister() when initializing new interface. rapide.c/ide-pnp.c/ide-cs.c/ide_platform.c/au1xxx-ide.c/delkin_cb.c/scc_pata.c: * Don't set 'init_default' and 'restore' flags for ide_unregister() when removing interface. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-